Search

Developing environmentally friendly building materials with low environmental impacts is receiving more attention nowadays to face the global challenges of climate change; building insulation materials made from agricultural waste can be used for their low environmental impact and to generate responsible supplies that utilize natural resources adequately. The study aims to assess a panel made from rice husk using the pulping method. An experimental design established the proportion of rice husk, the percentage of additive (NaOH concentration), boiling time and blending time. Taguchi’s method was applied to investigate the effect on density and thermal conductivity; the final panel with optimum conditions was morphologically analyzed using scanning electron microscopy (SEM); the thermal behavior was studied by thermogravimetric analysis (TGA); fire reaction and smoldering behavior were analyzed; and characterization in water absorption and acoustic absorption performances were established. The results show thermal conductivity values between 0.037 and 0.042 W/mK, a smoldering velocity of 3.40 mm/min, and a good acoustic absorption coefficient in octave frequency bands between 125 Hz and 4 kHz greater than 0.7. These characteristics are competitive with other insulating bio-based materials available on the market. This study employed chemicals utilized by other biomaterials for the pulping process and in flame retardants. However, it is important to investigate natural treatments or those with a diminished environmental impact., Peer Reviewed, Postprint (published version)

The present study focuses on the application of large-format thermal ceramic conditioning panels (TCPs) containing polypropylene (PPR) capillary tube mats in dwellings on the Mediterranean coast. The thermal and energy behaviours were examined once the underfloor heating was installed, and they were compared with an alternative wall application. The system was implemented in a single-family house located on the Spanish Mediterranean coast. After having monitored the house during a complete one-year cycle, the annual energy demand was quantified using the Design Builder tool. TCP panels applied to radiant floors reduced energy demand by 5.15% compared to the wall-layout alternative. Significant reductions in CO2 emissions were also achieved, as well as a 25.19% reduction in energy demand compared to convection systems. The incorporation of 24 m2 of solar thermal panels into the system, combined with solar cooling systems based on lithium chloride, was also analysed. A reduction in energy demand of 57.46% was obtained compared to all-air convection systems. Finally, the amortisation periods of the investments in TCP panels and solar panels were calculated and compared to a convection system. Underfloor TCP panels proved to be more cost-effective than a wall installation. The additional cost of EUR 21,844 could be amortised over approximately 14 years with the radiant underfloor TCP system, while the wall TCP would be amortised over 17.4 years.