Search

Surgery residency program websites (SRW) are an important source of information for prospective applicants. The COVID-19 pandemic spurred a pivot from the traditional in-person interview format to interviews via virtual platforms. Because of the inability to meet in person, the information provided on program websites takes on an increased relevance to applicants. We hypothesized that SRW may be missing content important to applicants. Our study aims to assess SRW for the content which impacts the applicant decision-making process.An internal survey distributed to fourth-year medical students in 2020 at a single academic institution identified the website content most important to applicants. A list of ACGME-accredited SRW as of December 1, 2020 was obtained. Using the Fellowship and Residency Electronic and Interactive Database, websites were assessed for content parameters identified by the survey.Medical students applying to surgical specialties identified fellowship acquisition (94%), faculty information (88%), application contact information (82%), and resident wellness (77%) as the most important website content. Review of SRW websites identified content pertaining to fellowship acquisition and resident wellness in only 60% and 27% of cases respectively. Overall, the SRW of university programs included the most content parameters, followed by hybrid programs, then community programs.Many SRW are missing information that applicants deem important in their decision-making process. Most notably, there is a relative deficiency in information pertaining to fellowship match results and resident wellness. University based programs tend to include more of this information on their websites. SRW should continue to adapt to meet the needs of applicants in an increasingly virtual age.

Objective Assess construct validity of a low-cost medium-fidelity silicone injection molded model task trainer for endoscopic sinus surgery (ESS) training. Methods Fellowship-trained rhinologists, otolaryngology attendings, and otolaryngology residents at various levels of training performed sinus endoscopy and seven procedures on the model. Construct validity was evaluated by comparing novice to various levels of experienced performance using a validated checklist. Results Thirty-two subjects participated in this study. Otolaryngology attendings and postgraduate year (PGY) 3 to 5 otolaryngology residents significantly outperformed PGY 1 to 2 otolaryngology residents on most tasks in the task-specific checklist. Conclusions This study demonstrated the construct validity of the low-cost medium-fidelity ESS model. Level of evidence NA Laryngoscope, 129:1505-1509, 2019.

Background Large skull base defects can be challenging to repair. This study uses a controlled ex vivo model to examine the failure pressures of various dural repairs of large skull base defects using mucosa with fibrin glue under 3 conditions: No Additional Support of the repair, support with a Foley catheter (Direct Support), and with Foley catheter contact over a rigid acrylic plate (Diffuse Support). Methods Failure pressures of dural repairs with and without support were determined in a porcine model using an ex vivo closed testing apparatus. In addition, 20 mm × 15 mm dural defects were created. Skull base repairs were performed using porcine dura as an underlay graft followed by a septal mucosa overlay. Saline was infused at 30 mL/h, applying even force to the underside of the graft until repair failure occurred for each condition (none, direct, and diffuse support). Five trials were performed per repair type for a total of 15 repairs. Results The mean failure pressures were as follows: No Additional Support, 6.494 ± 2.553 mm Hg; Direct Support, 5.103 ± 3.913 mm Hg; and Diffuse Support, 15.649 ± 2.638 mm Hg. A post hoc Bonferroni-Holm test demonstrated significant difference between No Additional Support and Diffuse Support ( P = .001), as well as Direct Support and Diffuse Support ( P = .002). Conclusion Support of dural repairs in this model withstood higher pressures when the Foley catheter’s support is distributed evenly using a flat acrylic plate. Use of this plate is the only repair tested in this model that tolerated normal adult supine intracranial pressures.

OBJECTIVES/HYPOTHESIS Develop a low-cost, medium-fidelity model for education in endoscopic sinus surgery techniques. Establish face and content validity of the model based on the feedback of otolaryngology faculty including fellowship-trained rhinologists. STUDY DESIGN Survey. METHODS A novel silicone injection molded sinus model was constructed. Three fellowship-trained rhinologists and four general otolaryngologists were recruited to perform seven tasks and provide feedback of the model's performance via a 22-question Likert survey. RESULTS Those surveyed strongly agreed the sinus model is useful for basic endoscopic skill acquisition such as camera skills (86%), hand-eye coordination (100%), nasal endoscopy skills (100%). Ratings of the model for training the specific tasks were consistently high. Neutral or lower were received for inferior turbinoplasty (14%), frontal balloon task (14%), understanding the ethmoid bulla (29%), and advanced sinus techniques (57%). All faculty strongly agreed they would be interested in using the model to train residents. CONCLUSIONS Simulation models have proven efficacy in endoscopic skill and procedural training. The group developed a novel low-cost, medium-fidelity sinus training model utilizing three-dimensional modeling and printing. Testing of this model revealed high ratings for both face and construct validity for a range of endoscopic procedures. Strong interest in using this model for resident training was unanimous among all survey participants. LEVEL OF EVIDENCE NA Laryngoscope, 127:781-786, 2017.

Background The objective of this study was to determine failure pressures of 6 rhinologic repair techniques of large skull base/dural defects in a controlled, ex vivo model. Methods Failure pressures of 6 dural repairs in a porcine model were studied using a closed testing apparatus; 24-mm × 19-mm dural defects were created; 40-mm × 34-mm grafts composed of porcine Duragen (Integra), fascia lata, and Biodesign (Cook) were used either with or without Tisseel (Baxter International Inc.) to create 6 repairs: Duragen/no glue (D/NG), Duragen/Tisseel (D/T), fascia lata/no glue (FL/NG), fascia lata/Tisseel (FL/T), Biodesign/no glue (B/NG), and Biodesign/Tisseel (B/T). Saline was infused at 30 mL/hour, applying even force to the underside of the graft until repair failure. Five trials were performed per repair type for a total of 30 repairs. Results Mean failure pressures were as follows: D/NG 1.361 ± 0.169 cmH2O; D/T 9.127 ± 1.805 cmH2O; FL/NG 0.200 ± 0.109 cmH2O; FL/T 7.833 ± 2.657 cmH2O; B/NG 0.299 ± 0.109 cmH2O; and B/T 2.67 ± 0.619 cmH2O. There were statistically significant differences between glued (Tisseel) and non-glued repairs for each repair category (p < 0.05). Conclusion All glued repairs performed better than non-glued repairs. Both D/T and FL/T repairs performed better than B/T repairs. No repair tolerated pressures throughout the full range of adult supine intracranial pressure.

Assess construct validity of a low-cost medium-fidelity silicone injection molded model task trainer for endoscopic sinus surgery (ESS) training.Fellowship-trained rhinologists, otolaryngology attendings, and otolaryngology residents at various levels of training performed sinus endoscopy and seven procedures on the model. Construct validity was evaluated by comparing novice to various levels of experienced performance using a validated checklist.Thirty-two subjects participated in this study. Otolaryngology attendings and postgraduate year (PGY) 3 to 5 otolaryngology residents significantly outperformed PGY 1 to 2 otolaryngology residents on most tasks in the task-specific checklist.This study demonstrated the construct validity of the low-cost medium-fidelity ESS model.NA Laryngoscope, 129:1505-1509, 2019.

Background The objective of this work was to determine the failure pressures of 3 commonly performed repair techniques of 5-mm dural defects in a controlled setting. Methods This was a pig dura ex vivo study. A testing apparatus was fabricated to study failure pressures of 3 different repairs in a porcine model. Five-millimeter (5-mm) dural defects were created and plugged with autologous mucosa/Tisseel (MT) (Baxter International Inc.), fat graft (FG), and bath plug (BP) techniques. Saline solution was infused at 30 mL/hour to apply unidirectional pressure to the repair until failure occurred. Five dural repairs were performed for each arm of the trial, for a total of 15 trials. Results The mean failure pressure of the MT repair was 4.3 ± 1.9 cmH2O, of the FG repair was 10.9 ± 4.2 cmH2O, and of the BP repair was 20.7 ± 2.2 cmH2O. Differences among mean failure pressures were statistically significant. Conclusion The BP repair showed significantly higher tolerances for pressure than the other 2 repairs. The BP repair was the only technique that withstood adult physiologic supine cerebrospinal fluid (CSF) pressure.

Develop a low-cost, medium-fidelity model for education in endoscopic sinus surgery techniques. Establish face and content validity of the model based on the feedback of otolaryngology faculty including fellowship-trained rhinologists.Survey.A novel silicone injection molded sinus model was constructed. Three fellowship-trained rhinologists and four general otolaryngologists were recruited to perform seven tasks and provide feedback of the model's performance via a 22-question Likert survey.Those surveyed strongly agreed the sinus model is useful for basic endoscopic skill acquisition such as camera skills (86%), hand-eye coordination (100%), nasal endoscopy skills (100%). Ratings of the model for training the specific tasks were consistently high. Neutral or lower were received for inferior turbinoplasty (14%), frontal balloon task (14%), understanding the ethmoid bulla (29%), and advanced sinus techniques (57%). All faculty strongly agreed they would be interested in using the model to train residents.Simulation models have proven efficacy in endoscopic skill and procedural training. The group developed a novel low-cost, medium-fidelity sinus training model utilizing three-dimensional modeling and printing. Testing of this model revealed high ratings for both face and construct validity for a range of endoscopic procedures. Strong interest in using this model for resident training was unanimous among all survey participants.NA Laryngoscope, 127:781-786, 2017.

The objective of this study was to determine failure pressures of 6 rhinologic repair techniques of large skull base/dural defects in a controlled, ex vivo model.Failure pressures of 6 dural repairs in a porcine model were studied using a closed testing apparatus; 24-mm × 19-mm dural defects were created; 40-mm × 34-mm grafts composed of porcine Duragen (Integra), fascia lata, and Biodesign (Cook) were used either with or without Tisseel (Baxter International Inc.) to create 6 repairs: Duragen/no glue (D/NG), Duragen/Tisseel (D/T), fascia lata/no glue (FL/NG), fascia lata/Tisseel (FL/T), Biodesign/no glue (B/NG), and Biodesign/Tisseel (B/T). Saline was infused at 30 mL/hour, applying even force to the underside of the graft until repair failure. Five trials were performed per repair type for a total of 30 repairs.Mean failure pressures were as follows: D/NG 1.361 ± 0.169 cmHAll glued repairs performed better than non-glued repairs. Both D/T and FL/T repairs performed better than B/T repairs. No repair tolerated pressures throughout the full range of adult supine intracranial pressure.

The objective of this work was to determine the failure pressures of 3 commonly performed repair techniques of 5-mm dural defects in a controlled setting.This was a pig dura ex vivo study. A testing apparatus was fabricated to study failure pressures of 3 different repairs in a porcine model. Five-millimeter (5-mm) dural defects were created and plugged with autologous mucosa/Tisseel (MT) (Baxter International Inc.), fat graft (FG), and bath plug (BP) techniques. Saline solution was infused at 30 mL/hour to apply unidirectional pressure to the repair until failure occurred. Five dural repairs were performed for each arm of the trial, for a total of 15 trials.The mean failure pressure of the MT repair was 4.3 ± 1.9 cmH2 O, of the FG repair was 10.9 ± 4.2 cmH2 O, and of the BP repair was 20.7 ± 2.2 cmH2 O. Differences among mean failure pressures were statistically significant.The BP repair showed significantly higher tolerances for pressure than the other 2 repairs. The BP repair was the only technique that withstood adult physiologic supine cerebrospinal fluid (CSF) pressure.