Search

Plastics are produced with a staggering array of chemical compounds, with many being known to possess hazardous properties, and others lacking comprehensive hazard data. Furthermore, non-intentionally added substances can contaminate plastics at various stages of their lifecycle, resulting in recycled materials containing an unknown number of chemical compounds at unknown concentrations. While some national and regional regulations exist for permissible concentrations of hazardous chemicals in specific plastic products, less than 1 % of plastics chemicals are subject to international regulation [1]. There are currently no policies mandating transparent reporting of chemicals throughout the plastics value chain or comprehensive monitoring of chemicals in recycled materials. The dataset presented here provides the chemical analysis of 28 samples of recycled High-Density Polyethylene (HDPE) pellets obtained from various regions of the Global South, along with a reference sample of virgin HDPE. The analysis comprises both Target and Non-Targeted Screening approaches, employing Liquid Chromatography-High-Resolution Mass Spectrometry (LC-HRMS) and Gas Chromatography-High-Resolution Mass Spectrometry (GC-HRMS). In total, 491 organic compounds were detected and quantified, with an additional 170 compounds tentatively annotated. These compounds span various classes, including pesticides, pharmaceuticals, industrial chemicals, plastic additives. The results highlight the prevalence of certain chemicals, such as N-ethyl-o-Toluesulfonamide, commonly used in HDPE processing, found in high concentrations. The paper provides a dataset advancing knowledge of the complex chemical composition associated with recycled plastics., (© 2023 The Authors. Published by Elsevier Inc.)

Plastics undergo successive fragmentation and chemical leaching steps in the environment due to weathering processes such as photo-oxidation. Here, we report the effects of leachates from UV-irradiated microplastics towards the chlorophyte Scenedesmus vacuolatus. The microplastics tested were derived from an additive-containing electronic waste (EW) and a computer keyboard (KB) as well as commercial virgin polymers with low additive content, including polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), and polystyrene (PS). Whereas leachates from additive-containing EW and KB induced severe effects, the leachates from virgin PET, PP, and PS did not show substantial adverse effects in our autotrophic test system. Leachates from PE reduced algae biomass, cell growth, and photosynthetic activity. Experimental data were consistent with predicted effect concentrations based on the ionization-corrected liposome/water distribution ratios (D lip/w ) of polymer degradation products of PE (mono- and dicarboxylic acids), indicating that leachates from weathering PE were mainly baseline toxic. This study provides insight into algae toxicity elicited by leachates from UV-weathered microplastics of different origin, complementing the current particle- vs. chemical-focused research towards the toxicity of plastics and their leachates., (© 2021. The Author(s).)

In the context of environmental plastic pollution, it is still under debate if and how the "plastisphere", a plastic-specific microbial community, emerges. In this study, we tested the hypothesis that the first conditioning film of dissolved organic matter (DOM) sorbs selectively to polymer substrates and that microbial attachment is governed in a substrate-dependent manner. We investigated the adsorption of stream water-derived DOM to polyethylene terephthalate (PET), polystyrene (PS), and glass (as control) including UV-weathered surfaces by Fourier-transform ion cyclotron mass spectrometry. Generally, the saturated, high-molecular mass and thus more hydrophobic fraction of the original stream water DOM preferentially adsorbed to the substrates. The UV-weathered polymers adsorbed more polar, hydrophilic OM as compared to the dark controls. The amplicon sequencing data of the initial microbial colonization process revealed a tendency of substrate specificity for biofilm attachment after 24 h and a clear convergence of the communities after 72 h of incubation. Conclusively, the adsorbed OM layer developed depending on the materials' surface properties and increased the water contact angles, indicating higher surface hydrophobicity as compared to pristine surfaces. This study improves our understanding of molecular and biological interactions at the polymer/water interface that are relevant to understand the ecological impact of plastic pollution on a community level.

Standard ecotoxicological testing of microplastic does not provide insight into the influence that environmental weathering by, e.g., UV light has on related effects. In this study, we leached chemicals from plastic into artificial seawater during simulated UV-induced weathering. We tested largely additive-free preproduction polyethylene, polyethylene terephthalate, polypropylene, and polystyrene and two types of plastic obtained from electronic equipment as positive controls. Leachates were concentrated by solid-phase extraction and dosed into cell-based bioassays that cover (i) cytotoxicity; (ii) activation of metabolic enzymes via binding to the arylhydrocarbon receptor (AhR) and the peroxisome proliferator-activated receptor (PPARγ); (iii) specific, receptor-mediated effects (estrogenicity, ERα); and (iv) adaptive response to oxidative stress (AREc32). LC-HRMS analysis was used to identify possible chain-scission products of polymer degradation, which were then tested in AREc32 and PPARγ. Explicit activation of all assays by the positive controls provided proof-of-concept of the experimental setup to demonstrate effects of chemicals liberated during weathering. All plastic leachates activated the oxidative stress response, in most cases with increased induction by UV-treated samples compared to dark controls. For PPARγ, polyethylene-specific effects were partially explained by the detected dicarboxylic acids. Since the preproduction plastic showed low effects often in the range of the blanks future studies should investigate implications of weathering on end consumer products containing additives.

In rodent models of experimentally induced fever, the important role of interleukin-6 (IL-6) as a circulating endogenous pyrogen is well established. Studies employing larger animal species and real infections are scarce. Therefore, we assessed bioactive IL-6 in peripheral blood and in broncho-alveolar lavage fluid (BALF) of calves after intra-bronchial inoculation with vital Chlamydia psittaci (Cp), with inactivated Cp, or with BGM cells. Only calves inoculated with vital Cp developed fever (peak at 2-3 days after challenge) and significantly increased IL-6 activity. Controls inoculated with either inactivated Cp or BGM cells also expressed increased bioactive IL-6, but no fever developed. Activity of IL-6 in BALF was significantly higher compared to blood serum. This experimental model of Cp infection revealed no apparent relation between IL-6 in blood and body temperature, but did reveal a relation between IL-6 and other markers of inflammation in BALF. We conclude that a local inflammatory response in the lungs of infected calves caused fever, which developed by mechanisms including other mediators besides IL-6.

The presence of microplastic (MP) in the aquatic environment is recognized as a global-scale pollution issue. Secondary MP particles result from an ongoing fragmentation process governed by various biotic and abiotic factors. For a reliable risk assessment of these MP particles, knowledge about interactions with biota is needed. However, extensive testing with standard organisms under reproducible laboratory conditions with well-characterized MP suspensions is not available yet. As MP in the environment represents a mixture of particles differing in properties (e.g., size, color, polymer type, surface characteristics), it is likely that only specific particle fractions pose a threat towards organisms. In order to assign hazardous effects to specific particle properties, these characteristics need to be analyzed. As shown by the testing of particles (e.g. nanoparticles), characteristics other than chemical properties are important for the emergence of toxicity in organisms, and parameters such as surface area or size distribution need consideration. Therefore, the use of "well-defined" particles for ecotoxicological testing (i.e., standard particles) facilitates the establishment of causal links between physical-chemical properties of MP particles and toxic effects in organisms. However, the benefits of well-defined particles under laboratory conditions are offset by the disadvantage of the unknown comparability with MP in the environment. Therefore, weathering effects caused by biological, chemical, physical or mechanical processes have to be considered. To date, the characterization of the progression of MP weathering based on powder and suspension characterization methods is in its infancy. The aim of this commentary is to illustrate the prerequisites for testing MP in the laboratory from 3 perspectives: (i) knowledge of particle properties; (ii) behavior of MP in test setups involving ecotoxicological test organisms; and (iii) accordingly, test conditions that may need adjustment. Only under those prerequisites will reliable hazard assessment of MP be feasible. Integr Environ Assess Manag 2017;13:500-504. © 2017 SETAC., (© 2017 SETAC.)

Persistent hydrophobic chemicals sorbed to plastic can be transferred to fish and other aquatic organisms upon ingestion. However, ingestion of plastic could also lead to enhanced elimination of these chemicals if the plastic is less contaminated than the fish. Here, we attempted to measure the influence of ingestion of uncontaminated polyethylene microspheres on the depuration rates of polychlorinated biphenyls (PCBs) in an in vivo fish feeding experiment. Rainbow trout were given feed contaminated with PCBs for two consecutive days, then clean feed for three days to allow for egestion of the contaminated food. A control group of fish were then fed ordinary food pellets and a treatment group were fed pellets that additionally contained 40% by weight polyethylene microspheres. Condition factors and growth rates in both groups were similar, indicating no negative effect of the plastic microspheres on the nutritional status of the fish. Fish were sampled after zero, three, six and nine weeks, homogenized, solvent-extracted and analyzed by GC/MS. PCB concentrations declined in both groups at a rate consistent with growth dilution. There was no significant difference in the elimination rate constants between the control and treatment group, indicating that ingestion of uncontaminated plastic did not cause a measurable enhancement of depuration of PCBs by the fish in this study.

Plastic ingestion by marine biota has been reported for a variety of different taxa. In this study, we investigated 290 gastrointestinal tracts of demersal (cod, dab and flounder) and pelagic fish species (herring and mackerel) from the North and Baltic Sea for the occurrence of plastic ingestion. In 5.5% of all investigated fishes, plastic particles were detected, with 74% of all particles being in the microplastic (<5mm) size range. The polymer types of all found particles were analysed by means of Fourier transform infrared (FT-IR) spectroscopy. Almost 40% of the particles consisted of polyethylene (PE). In 3.4% of the demersal and 10.7% of the pelagic individuals, plastic ingestion was recorded, showing a significantly higher ingestion frequency in the pelagic feeders. The condition factor K was calculated to test differences in the fitness status between individuals with and without ingested plastic, but no direct effect was detected., (Copyright © 2015 Elsevier Ltd. All rights reserved.)