Search

In this study, we report the novel energy behavior of high-performance nanostructured materials in a segmented thermoelectric micro-generator (TEG). Several physical elements of the materials must be considered to determine their behavior in the thermoelectric energy conversion: temperature dependence of material properties, geometric structure, segmentation, and the symmetry of each or both p-type and n-type nanostructure semiconductor thermoelements. Recently, many efforts have reported effects independent on the thermoelectric performance of semiconductor materials. In this work, exhaustive research on the performance of high-performance nanostructured materials in a segmented thermoelectric micro-generator (TEG) was carried out. Our results show the efficiency and output power of the TEG using the temperature-dependent model, i.e., a variable internal resistance for a load resistance of the system. Our approach allows us to analyze symmetrical and asymmetric geometries, showing maximum and minimum peaks values in the performance of the TEG for specific [Formula: see text] values. The performance of the TEG is improved by about [Formula: see text] and [Formula: see text], for efficiency, and output power, respectively, considering a trapezoidal geometric shape in the 2p-3n segmented system, compared with the conventional rectangular shape.

Thermoelectric coolers (TECs) can reach temperatures below that obtained with a steady-state current by applying an electrical current pulse which enables a transitory state in a Peltier device. This effect is known as supercooling. In this paper, we study characteristics parameters, such as the minimum cooling temperature and spatial temperature profile, in a TEC operated under current pulses and a cooling load ( Q c ) . Numerical analysis for a one-dimensional thermoelectric model of the cooling system is developed, and a novel MATLAB programming code is proposed for the transient state based on finite element analysis. We also investigate the influence of the thermoelement's length upon the cooling mechanism. A new parameter called the "characteristic cooling length" is proposed to describe the length in which the minimum cooling temperature occurs along the elements of a TEM. Results show the transient temperature profiles along the elements of the semiconductor P-type element, and a "characteristic cooling length" is characterized. We also propose a general principle, and the lowest cooling temperature values are obtained for a semiconductor's small length and variable pulse cooling load under current pulse operation. The present study will serve as guidance for the geometric design of TECs under current pulse operations.

In this work, the influences of the Thomson effect and the geometry of the p-type segmented leg on the performance of a segmented thermoelectric microcooler (STEMC) were examined. The effects of geometry and the material configuration of the p-type segmented leg on the cooling power ( Q c ) and coefficient of performance ( C O P ) were investigated. The influence of the cross-sectional area ratio of the two joined segments on the device performance was also evaluated. We analyzed a one-dimensional p-type segmented leg model composed of two different semiconductor materials, B i 2 T e 3 and ( B i 0.5 S b 0.5 ) 2 T e 3 . Considering the three most common p-type leg geometries, we studied both single-material systems (using the same material for both segments) and segmented systems (using different materials for each segment). The C O P , Q c and temperature profile were evaluated for each of the modeled geometric configurations under a fixed temperature gradient of Δ T = 30 K. The performances of the STEMC were evaluated using two models, namely the constant-properties material (CPM) and temperature-dependent properties material (TDPM) models, considering the thermal conductivity ( κ ( T ) ), electrical conductivity ( σ ( T ) ) and Seebeck coefficient ( α ( T ) ). We considered the influence of the Thomson effect on C O P and Q c using the TDPM model. The results revealed the optimal material configurations for use in each segment of the p-type leg. According to the proposed geometric models, the optimal leg geometry and electrical current for maximum performance were determined. After consideration of the Thomson effect, the STEMC system was found to deliver a maximum cooling power that was 5.10 % higher than that of the single-material system. The results showed that the inverse system (where the material with a higher Seebeck coefficient is used for the first segment) delivered a higher performance than the direct system, with improvements in the C O P and Q c of 6.67 % and 29.25 % , respectively. Finally, analysis of the relationship between the areas of the STEMC segments demonstrated that increasing the cross-sectional area in the second segment led to improvements in the C O P and Q c of 16.67 % and 8.03 % , respectively., Competing Interests: The authors declare no conflict of interest.