Search

Polysaccharides are important components of Alpiniae oxyphyllae fructus that have been shown to exhibit significant immunomodulatory activity in our previous study. However, whether and how A. oxyphyllae fructus polysaccharides (AOFP) affect macrophages has not been determined. To further study the immunomodulatory activity of AOFP, the effect of AOFP on RAW264.7 cell activation was investigated in the present work. The results showed that AOFP2 significantly increased the phagocytic activity of RAW264.7 macrophages. AOFP2 promoted the secretion of TNF-α, IL-6, IL-10, TGF-β, NO and iNOS and enhanced the Th2-type immune response via its activation effect on macrophages. Additionally, the structure of AOFP2 was characterized in the present study, as the structural features of polysaccharides determine their biological activities. AOFP2 was only composed of glucose, exhibiting an average molecular weight of 44.3 kDa. Furthermore, the infrared spectroscopy, methylation and nuclear magnetic resonance results indicated that AOFP2 consisted of → 4)-α-D-Glcp-(1→, →4,6)-α-D-Glcp-(1 → and T-α-Glcp.

Ethnopharmacological relevance The dry overground parts of Pogostemon cablin (Blanco) Benth. is widely used in China as a traditional Chinese medicine for the treatment of diarrhea, vomiting, nausea and fever. Polysaccharide is an important component of Pogostemon cablin (Blanco) Benth. but has not been studied. Pogostemon cablin (Blanco) Benth. is used to treat porcine epidemic diarrhea. But it is not known whether Pogostemon cablin polysaccharides (PCPs) has the antiviral activities against porcine epidemic diarrhea virus (PEDV). Aim of the study The purpose of present study is to investigate the structural characterization and the anti-PEDV activities of PCPs. Materials and methods PCPs were prepared by water extraction and alcohol precipitation method and purified with DEAE-52 cellulose column and Sephadex G-100 column. Then, the structural characterization of the polysaccharides including the infrared spectrum, molecular weight and monosaccharide composition were analyzed. Afterwards, the antiviral effect of PCPs against PEDV on IPEC-J2 cells was studied by MTT method and real-time PCR method. Additionally, the effects of PCPs on PEDV adsorption, penetration and replication were analyzed by real-time PCR method. Furthermore, we also investigate whether the anti-oxidative effects of PCPs were important to the anti-PEDV activities. Results Four polysaccharides were obtained and named as PCP1.1 (31.3 kDa), PCP1.2 (3.5 kDa), PCP2.1 (9.1 kDa) and PCP2.2 (8.3 kDa). PCP1.1, PCP1.2 and PCP2.1 were composed of fucose, arabinose, galactose, glucose, mannose, galacturonic acid and glucuronic acid; and PCP2.2 was composed of arabinose, galactose, glucose, galacturonic acid and glucuronic acid. All PCPs showed anti-PEDV activities. PCP1.1 and PCP1.2 inhibited PEDV replication, while PCP2.1 and PCP2.2 inhibited PEDV penetration and replication. All PCPs showed anti-oxidative effects, which were important to the anti-PEDV activities. Conclusions The treatment effect of Pogostemon cablin (Blanco) Benth. on porcine epidemic diarrhea might be related to the anti-PEDV effect of PCPs. Furthermore, the anti-oxidative effects of PCPs play important roles in their antiviral activities against PEDV.

Amomum longiligulare polysaccharides 1 (ALP1) was a glucosan that possessed an immune enhancement ability. However, disadvantages including short biological half-life hindered the application of ALP1. To solve these shortcomings, ALP1 was successfully prepared to nanoparticles (ALPP) with poly (lactic-co-glycolic acid) in the present study. And the optimal preparation conditions were developed by using the response surface method with a Box-Behnken design. The results showed that the encapsulation efficiency of ALPP reached a high level (79.88%) when the volume ratio of the water phase to the organic phase was 1:7, the volume ratio of the primary emulsion to the external water phase was 1:7, and the concentration of F68 was 0.7%. ALPP showed a controlled and sustained release. Meanwhile, the scanning electron microscope results showed that ALPP was a kind of nanoparticles with a diameter of 389.77 nm. In addition, the activating effect of ALPP on macrophages was studied. The results indicated that ALPP showed a better activity on promoting the RAW264.7 cells’ activities and polarizing RAW264.7 cells into both M1 type and M2 type macrophages, compared to ALP1.

The Leverhulme Trust funded the collaboration through an International Network grant for Stratified Flames. This work at Sandia was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.

For further applications of Alpiniae oxyphyllae fructus in modern clinical medicine, Alpiniae oxyphyllae fructus polysaccharide (AOFP) was studied in the present work. The extraction conditions of AOFP were optimized by the response surface method with a Box-Behnken design. The maximum extraction rate of AOFP was 3.18%. An anion-exchange DEAE-52 cellulose column and a Sephadex G-100 gel column were used to isolate the AOFP, and three polysaccharides (AOFP1, AOFP2, AOFP3) were obtained. All three polysaccharides possessed immunoregulatory activity, but the effects of AOFP1 were greater than the other two polysaccharides. AOFP1 significantly stimulated Th1- and Th2-type immune responses and specific immune responses. Meanwhile, the characterization of AOFP1 was studied. AOFP1 was composed of arabinose, galactose, glucose, xylose, mannose, galacturonic acid, and glucuronic acid at a molar ratio of 16.46:12.7:4.9:17.11:4.35:6.52:6 with an average molecular weight of 43.4 kDa. These results suggest that AOFP1 can be developed as a natural immunomodulatory drug.

Staphylococcus aureus is a zoonotic pathogen that causes various life-threatening diseases. The mechanisms of action of amoxicillin against S. aureus are unclear. Here, we established a rabbit tissue cage infection model to evaluate the relationship between the pharmacokinetic/pharmacodynamic (PK/PD) parameters of amoxicillin and selective enrichment of resistant strains of S. aureus and to elucidate the evolution of its resistance to amoxicillin. S. aureus was injected into the tissue cages at 1010 colony forming units (CFU)/mL. We injected different intramuscular concentrations of amoxicillin at doses of 5, 10, 20, and 30 mg/kg body weight once a day for 5 days and 5, 10, 20, and 30 mg/kg body weight twice a day for 2.5 days. Differences in gene expression between two differentially resistant strains and a sensitive strain were evaluated using Illumina sequencing followed by COG and KEGG analysis. RT-qPCR was carried out to validate the difference in protein translation levels. Our results demonstrated that the emergence of resistant bacteria was dose dependent within a given time interval. In the same dosage group, the appearance of resistant bacteria increased with time. The resistant bacteria showed cumulative growth, and the level of resistance increased over time. The resistant bacteria were completely inhibited when the cumulative percentage of time over a 24-h period that the drug concentration exceeded the mutant prevention concentration (MPC) (%T > MPC) was ≥52%. We also found that mecA and femX in S. aureus played a leading role in the development of resistance to amoxicillin. In conclusion, it provide references for optimizing amoxicillin regimens to treat infections caused by S. aureus.

The present study performed an integral analysis of the gene expression and DNA methylation profile of pilocytic astrocytomas (PAs). Weighted gene co-expression network analysis (WGCNA) was also performed to examine and identify the genes correlated to PAs, to identify candidate therapeutic targets for the treatment of PAs. The DNA methylation profile and gene expression profile were downloaded from the Gene Expression Omnibus database. Following screening of the differentially expressed genes (DEGs) and differentially methylated regions (DMRs), respectively, integrated analysis of the DEGs and DMRs was performed to detect their correlation. Subsequently, the WGCNA algorithm was applied to identify the significant modules and construct the co‑expression network associated with PAs. Furthermore, Gene Ontology enrichment analysis of the associated genes was performed using the Database for Annotation, Visualization and Integrated Discovery. A total number of 2,259 DEGs and 235 DMRs were screened out. Integrated analysis revealed that 30 DEGs were DMRs with prominent negative correlation (cor=‑0.82; P=0.02). Based on the DEGs, the gene co‑expression network was constructed, and nine network modules associated with PAs were identified. The functional analysis results showed that genes relevant to PAs were closely associated with cell differentiation modulation. The screened PA-associated genes were significantly different at the expression and methylation levels. These genes may be used as reliable candidate target genes for the treatment of PAs.

Polysaccharide is the main active component of okra (Abelmoschus esculentus L.) and it can effectively stimulate the activation of macrophages. However, the immune regulatory mechanism is still not clear. Therefore, the present study aimed to reveal the possible mechanism by investigating the effect of okra polysaccharide-2 (RPS-2) on Toll-like receptor (TLR) 2/4-mediated signal transduction pathways in RAW264.7 murine macrophage cells. In order to confirm whether RPS-2 stimulated macrophages activation via TLR2 or TLR4, RAW264.7 murine macrophage cells were pretreated with TLR2/4 inhibitors for 1 h before RPS-2 treatment, and then the NO, IL-10, TNF-α levels were tested. The results indicated that both TLR2 and TLR4 were the keys of immune regulatory effect of RPS-2. Afterwards, the effect of RPS-2 on NF-κB and MAPKs signaling pathways were studied by western blot analysis. It showed RPS-2 induced the phosphorylation of p65, IκBα, p38, ERK1/2 and JNK. At the same time, the specific inhibitors reduced these phosphorylation levels as well as NO, IL-10 and TNF-α amounts. In a word, RPS-2 activated macrophages by NF-κB and MAPKs signal transduction pathways.

Flames are often stabilised on bluff-bodies, yet their surface temperatures are rarely measured. This paper presents temperature measurements for the bluff body surface of the Cambridge/Sandia Stratified Swirl Burner. The flame is stabilized by a bluff body, designed to provide a series of turbulent premixed and stratified methane/air flames with a variable degree of swirl and stratification. Recently, modellers have raised concerns about the role of surface temperature on the resulting gas temperatures and the overall heat loss of the burner. Laser-induced phosphorescence is used to measure surface temperatures, with Mg4GeO6F:Mn as the excitation phosphor, creating a spatially resolved temperature map. Results show that the temperature of the bluff body is in the range 550–900 K for different operating conditions. The temperature distribution is strongly correlated with the degree of swirl and local equivalence ratio, reflecting the temperature distribution obtained in the gas phase. The overall heat loss represents only a small fraction (

This paper presents flow field measurements for the turbulent stratified burner introduced in two previous publications in which high resolution scalar measurements were made by Sweeney et al. [1] , [2] for model validation. The flow fields of the series of premixed and stratified methane/air flames are investigated under turbulent, globally lean conditions (ϕg = 0.75). Velocity data acquired with laser Doppler anemometry (LDA) and particle image velocimetry (PIV) are presented and discussed. Pairwise 2-component LDA measurements provide profiles of axial velocity, radial velocity, tangential velocity and corresponding fluctuating velocities. The LDA measurements of axial and tangential velocities enable the swirl number to be evaluated and the degree of swirl characterized. Power spectral density and autocorrelation functions derived from the LDA data acquired at 10 kHz are optimized to calculate the integral time scales. Flow patterns are obtained using a 2-component PIV system operated at 7 Hz. Velocity profiles and spatial correlations derived from the PIV and LDA measurements are shown to be in very good agreement, thus offering 3D mapping of the velocities. A strong correlation was observed between the shape of the recirculation zones above the central bluff body and the effects of heat release, stoichiometry and swirl. Detailed analyses of the LDA data further demonstrate that the flow behavior changes significantly with the levels of swirl and stratification, which combines the contributions of dilatation, recirculation and swirl. Key turbulence parameters are derived from the total velocity components, combining axial, radial and tangential velocities.

Flames propagating through a mixture with a gradient of equivalence ratio have been previously demonstrated to travel faster or slower than their equivalent premixed flames. The present study aims to numerically investigate the response of strained laminar methane–air flames to such gradients. The flames are simulated in a counterflow configuration where a premixed reactant stream at equivalence ratio ϕ R opposes a hot equilibrium stream at equivalence ratio ϕ P . Premixed and stratified flames are compared with respect to the equivalence ratio ϕ * and the corresponding gradient ∇ ϕ * at the point of peak heat release rate, for three strain rates, a = 50, 300 and 500 s −1 and a range of ϕ * . The effect of different stratification levels is also investigated by varying the ratio of ϕ P to ϕ R , Θ . Results indicate that, as long as flames stabilize within the diffusion layer and Θ > 1, increased heat release rate Q is seen throughout the progress variable space in comparison to the premixed state. In contrast, an attenuation of heat release rate is seen for Θ Θ . The effect of stratification on flame behavior becomes more pronounced as the strain rate increases. The present study reveals the mechanisms for the propagation of quasi-steady stratified flames under lean and rich conditions: stratified flames are primarily dominated by the diffusion of heat under lean conditions, and diffusion of H 2 under rich conditions. Thanks to species and thermal support, stratified flames continue to burn beyond the premixed lean and rich flammability limits. Further investigation on the unsteady response of flames to the fluctuating equivalence ratio implies that the steady results represent the unsteady response well, as long as ϕ * and ∇ ϕ * are similar in both steady and unsteady cases.

Previous studies using particle image velocimetry (PIV) and laser Doppler anemometry (LDA) have raised the question of how these measurements should be compared. This study reports on the difference between Favre-averaged and Reynolds-averaged velocity statistics for a turbulent burner using PIV and LDA for unconditional and conditional velocity measurements. The experimental characterization of flow fields of premixed and stratified methane/air flames is carried out under globally turbulent lean conditions (global equivalence ratio at 0.75), over a range of stratifications and swirl numbers. Unconditioned velocity data was acquired using aluminium oxide to seed the flow field. Conditioned measurements were performed using vegetable oil aerosol as seed, which burns through the flame front, thus allowing only the non-reacting flow velocities to be obtained. A critical comparison of unconditioned velocity profiles measured using both PIV and LDA, including axial, radial, and tangential components is made against conditioned and reconstructed mean velocities at different cross-sections of the flame. The comparison reveals how the differences between the Favre-averaged (unconditioned) and the Reynolds-averaged (conditioned) velocity measurements in the flame brush region can be accounted for using the mean progress of reaction, and highlights the limits of the accuracy and agreement between PIV and LDA measurements.

This paper reports proper orthogonal decomposition (POD) analyses for the velocity fields measured in a test burner. The Cambridge/Sandia Stratified Swirl Burner has been used in various studies as a benchmark for high resolution scalar and velocity measurements, for comparison with numerical model prediction. Flow field data was collected for a series of bluff-body stabilized premixed and stratified methane/air flames at turbulent, globally lean conditions (ϕ = 0.75) using high speed stereoscopic particle image velocimetry (HS-SPIV). In this paper, a modal analysis was performed to identify the large scale flow structures and their impact on the flame dynamics. The high speed PIV system was operated at 3 kHz to acquire a series of 4096 sequential flow field images both for reactive and non-reactive cases, sufficient to follow the large-scale spatial and temporal evolution of flame and flow dynamics. The POD analysis allows identification of vortical structures, created by the bluff body, and in the shear layers surrounding the stabilization point. In addition, the analysis reveals that dominant structures are a strong function of the mixture stratification in the flow field. The dominant energetic modes of reactive and non-reactive flows are very different, as the expansion of gases and the high temperatures alter the unstable modes and their survival in the flow.