Search

Over the past two decades, numerous techniques have been developed for analysing microRNAs in body fluids and tissues. However, these techniques still face technical challenges, particularly when compared to well-established techniques for proteins and metabolites. Recently, the ODG platform was introduced, which is an innovative technology that allows for the direct detection and quantification of microRNAs in liquid biopsies without requiring extraction or amplification. This study presents the implementation of the ODG platform within a semi-automated protocol to create the "SA-ODG" platform, enhancing the efficiency and precision of microRNA testing while reducing hands-on time required by laboratory staff. For the first time, the SA-ODG platform has been used to directly quantify microRNAs in solid tissues. The results demonstrate precise analysis of miR-122-5p in mouse liver tissues using SA-ODG. These developments represent a crucial step forward in advancing the field of extraction and amplification-free microRNA detection and quantification. [ABSTRACT FROM AUTHOR]

Abstract: The paper presents the growth and characterization of highly textured La2Zr2O7 (LZO) multilayer coatings on Ni–5at.%W (NiW) biaxially textured substrates by chemical solution deposition (CSD) under highly reducing conditions (Ar+12%H2) in order to protect the metallic substrate from oxidation. The coating solution consists in a stoichiometric mixture of lanthanum and zirconium acetylacetonates dissolved in an excess of propionic acid. The precursor chemistry was studied by means of infrared spectroscopy, thermogravimetric–differential thermal analyses, Raman spectroscopy and X-ray diffraction carried out on the precursor powder. The as-grown multilayer LZO coating exhibits a sharp in-plane and out-of-plane texture, with the full-width-at-half-maximum of the ω-scans and φ-scans of about 7.2° and 8.0°, respectively, close to that of the NiW substrate. The volume fraction of the c-axis oriented grains from the top layer of the coating increases with the number of layers. The LZO coating exhibits a smooth and crack-free surface, appropriate for the further epitaxial growth of a seed layer for the YBa2Cu3O7−x (YBCO) deposition. Transmission Electron Microscopy was used to investigate the microstructure of the CSD LZO thin films deposited on flexible NiW substrates. A high density of nanovoids, with a size ranging between 10 and 30nm, was observed in the LZO layers. YBCO films epitaxially grown by pulsed laser deposition on the CSD LZO buffer layer exhibit critical current densities, Jc , close to 1.6MA/cm2 at 77K and self-field and zero resistance critical temperature (Tc (R=0)) of 90.3K. [Copyright &y& Elsevier]

Lamin B1, a key component of the nuclear lamina, plays an important role in brain development and function. A duplication of the human lamin B1 (LMNB1) gene has been linked to adult-onset autosomal dominant leukodystrophy, and mouse and human loss-of-function mutations in lamin B1 are susceptibility factors for neural tube defects. In the mouse, experimental ablation of endogenous lamin B1 (Lmnb1) severely impairs embryonic corticogenesis. Here we report that in primary mouse cortical neurons, LMNB1 overexpression reduces axonal outgrowth, whereas deficiency of endogenous Lmnb1 results in aberrant dendritic development. In the absence of Lmnb1, both the length and complexity of dendrites are reduced, and their growth is unresponsive to KCl stimulation. This defective dendritic outgrowth stems from impaired ERK signaling. In Lmnb1-null neurons, ERK is correctly phosphorylated, but phospho-ERK fails to translocate to the nucleus, possibly due to delocalization of nuclear pore complexes (NPCs) at the nuclear envelope. Taken together, these data highlight a previously unrecognized role of lamin B1 in dendrite development of mouse cortical neurons through regulation of nuclear shuttling of specific signaling molecules and NPC distribution., (© 2016 Giacomini et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).)

Here we show that macrozwitterions of poly(ethyl 2-cyanoacrylate), commonly called Super Glue, can easily assemble into long and well defined fibers by electrospinning. The resulting fibrous networks are thermally treated on glass in order to create transparent coatings whose superficial morphology recalls the organization of the initial electrospun mats. These textured coatings are characterized by low liquid adhesion and anti-staining performance. Furthermore, the low friction coefficient and excellent scratch resistance make them attractive as solid lubricants. The inherent texture of the coatings positively affects their biocompatibility. In fact, they are able to promote the proliferation and differentiation of myoblast stem cells. Optically-transparent and biocompatible coatings that simultaneously possess characteristics of low water contact angle hysteresis, low friction and mechanical robustness can find application in a wide range of technological sectors, from the construction and automotive industries to electronic and biomedical devices.

Confocal microscopy imaging of cells allows to visualize the presence of specific antigens by using fluorescent tags or fluorescent proteins, with resolution of few hundreds of nanometers, providing their localization in a large field-of-view and the understanding of their cellular function. Conversely, in scanning electron microscopy (SEM), the surface morphology of cells is imaged down to nanometer scale using secondary electrons. Combining both imaging techniques have brought to the correlative light and electron microscopy, contributing to investigate the existing relationships between biological surface structures and functions. Furthermore, in SEM, backscattered electrons (BSE) can image local compositional differences, like those due to nanosized gold particles labeling cellular surface antigens. To perform SEM imaging of cells, they could be grown on conducting substrates, but obtaining images of limited quality. Alternatively, they could be rendered electrically conductive, coating them with a thin metal layer. However, when BSE are collected to detect gold-labeled surface antigens, heavy metals cannot be used as coating material, as they would mask the BSE signal produced by the markers. Cell surface could be then coated with a thin layer of chromium, but this results in a loss of conductivity due to the fast chromium oxidation, if the samples come in contact with air. In order to overcome these major limitations, a thin layer of indium-tin-oxide was deposited by ion-sputtering on gold-decorated HeLa cells and neurons. Indium-tin-oxide was able to provide stable electrical conductivity and preservation of the BSE signal coming from the gold-conjugated markers., (© 2015 Wiley Periodicals, Inc.)

The cancer stem cell (CSC) model is describing tumors as a hierarchical organized system and CSCs are suggested to be responsible for cancer recurrence after therapy. The identification of specific markers of CSCs is therefore of paramount importance. Here, we show that high levels of lipid droplets (LDs) are a distinctive mark of CSCs in colorectal (CR) cancer. This increased lipid content was clearly revealed by label-free Raman spectroscopy and it directly correlates with well-accepted CR-CSC markers as CD133 and Wnt pathway activity. By xenotransplantation experiments, we have finally demonstrated that CR-CSCs overexpressing LDs retain most tumorigenic potential. A relevant conceptual advance in this work is the demonstration that a cellular organelle, the LD, is a signature of CSCs, in addition to molecular markers. A further functional characterization of LDs could lead soon to design new target therapies against CR-CSCs., (© 2014 The Authors. STEM CELLS Published by Wiley Periodicals, Inc. on behalf of AlphaMed Press.)

The fruit fly Drosophila melanogaster (Dm) mutant for PTEN-induced putative kinase 1 (PINK1B9) gene is a powerful tool to investigate physiopathology of Parkinson's disease (PD). Using PINK1B9 mutant Dm we sought to explore the effects of Mucuna pruriens methanolic extract (Mpe), a L-Dopa-containing herbal remedy of PD. The effects of Mpe on PINK1B9 mutants, supplied with standard diet to larvae and adults, were assayed on 3-6 (I), 10-15 (II) and 20-25 (III) days old flies. Mpe 0.1% significantly extended lifespan of PINK1B9 and fully rescued olfactory response to 1-hexanol and improved climbing behavior of PINK1B9 of all ages; in contrast, L-Dopa (0.01%, percentage at which it is present in Mpe 0.1%) ameliorated climbing of only PINK1B9 flies of age step II. Transmission electron microscopy analysis of antennal lobes and thoracic ganglia of PINK1B9 revealed that Mpe restored to wild type (WT) levels both T-bars and damaged mitochondria. Western blot analysis of whole brain showed that Mpe, but not L-Dopa on its own, restored bruchpilot (BRP) and tyrosine hydroxylase (TH) expression to age-matched WT control levels. These results highlight multiple sites of action of Mpe, suggesting that its effects cannot only depend upon its L-Dopa content and support the clinical observation of Mpe as an effective medication with intrinsic ability of delaying the onset of chronic L-Dopa-induced long-term motor complications. Overall, this study strengthens the relevance of using PINK1B9 Dm as a translational model to study the properties of Mucuna pruriens for PD treatment.

The results of an investigation on the Er doping of porous silicon are presented. Electrochemical impedance spectroscopy, optical reflectivity, and spatially resolved energy dispersive spectroscopy (EDS) coupled to scanning electron microscopy measurements were used to investigate on the transient during the first stages of constant current Er doping. Depending on the applied current intensity, the voltage transient displays two very different behaviors, signature of two different chemical processes. The measurements show that, for equal transferred charge and identical porous silicon (PSi) layers, the applied current intensity also influences the final Er content. An interpretative model is proposed in order to describe the two distinct chemical processes. The results can be useful for a better control over the doping process., Pacs: 81.05.Rm; 82.45.Rr.

Technologies that are able to handle microvolumes of liquids, such as microfluidics and liquid marbles, are attractive for applications that include miniaturized biological and chemical reactors, sensors, microactuators, and drug delivery systems. Inspired from natural fibrous envelopes, here, we present an innovative approach for liquid encapsulation and manipulation using electrospun nanofibers. We demonstrated the realization of non-wetting soft solids consisting of a liquid core wrapped in a hydrophobic fibrillar cloak of a fluoroacrylic copolymer and cellulose acetate. By properly controlling the wetting and mechanical properties of the fibers, we created final architectures with tunable mechanical robustness that were stable on a wide range of substrates (from paper to glass) and floated on liquid surfaces. Remarkably, the realized fiber-coated drops endured vortex mixing in a continuous oil phase at high stirring speed without bursting or water losses, favoring mixing processes inside the entrapped liquid volume. Moreover, the produced cloak can be easily functionalized by incorporating functional particles, active molecules, or drugs inside the nanofibers.

Parkinson's disease (PD) is one of the most common neurodegenerative disease characterized by the clinical triad: tremor, akinesia and rigidity. Several studies have suggested that PD patients show disturbances in olfaction at the earliest onset of the disease. The fruit fly Drosophila melanogaster is becoming a powerful model organism to study neurodegenerative diseases. We sought to use this system to explore olfactory dysfunction, if any, in PINK1 mutants, which is a model for PD. PINK1 mutants display many important diagnostic symptoms of the disease such as akinetic motor behavior. In the present study, we describe for the first time, to the best of our knowledge, neurophysiological and neuroanatomical results concerning the olfactory function in PINK1 mutant flies. Electroantennograms were recorded in response to synthetic and natural volatiles (essential oils) from groups of PINK1 mutant adults at three different time points in their life cycle: one from 3-5 day-old flies, from 15-20 and from 27-30 days. The results obtained were compared with the same age-groups of wild type flies. We found that mutant adults showed a decrease in the olfactory response to 1-hexanol, α-pinene and essential oil volatiles. This olfactory response in mutant adults decreased even more as the flies aged. Immunohistological analysis of the antennal lobes in these mutants revealed structural abnormalities, especially in the expression of Bruchpilot protein, a marker for synaptic active zones. The combination of electrophysiological and morphological results suggests that the altered synaptic organization may be due to a neurodegenerative process. Our results indicate that this model can be used as a tool for understanding PD pathogensis and pathophysiology. These results help to explore the potential of using olfaction as a means of monitoring PD progression and developing new treatments.

We present the fabrication of a multifunctional, hybrid organic-inorganic micropatterned device, which is capable to act as a stable photosensor and, at the same time, displaying inherent superhydrophobic self-cleaning wetting characteristics. In this framework several arrays of epoxy photoresist square micropillars have been fabricated on n-doped crystalline silicon substrates and subsequently coated with a poly(3-hexylthiophene-2,5-diyl) (P3HT) layer, giving rise to an array of organic/inorganic p-n junctions. Their photoconductivity has been measured under a solar light simulator at different illumination intensities. The current-voltage (I-V) curves show high rectifying characteristics, which are found to be directly correlated with the illumination intensity. The photoresponse occurs in extremely short times (within few tens of milliseconds range). The influence of the interpillar distance on the I-V characteristics of the sensors is also discussed. Moreover, the static and dynamic wetting properties of these organic/inorganic photosensors can be easily tuned by changing the pattern geometry. Measured static water contact angles range from 125° to 164°, as the distance between the pillars is increased from 14 to 120 μm while the contact angle hysteresis decreases from 36° down to 2°.

We report a simple and inexpensive method of fabricating highly hydrophobic novel materials based on interpenetrating networks of polyamide and poly(ethyl cyanoacrylate) hydrophilic components. The process is a single-step solution casting from a common solvent, formic acid, of polyamide and ethyl cyanoacrylate monomers. After casting and subsequent solvent evaporation, the in situ polymerization of ethyl cyanoacrylate monomer forms polyamide-poly(ethyl cyanoacrylate) interpenetrating network films. The interpenetrating networks demonstrate remarkable waterproof properties allowing wettability control by modulating the concentration of the components. In contrast, pure polyamide and poly(ethyl cyanoacrylate) films obtained from formic acid solutions are highly hygroscopic and hydrophilic, respectively. The polymerization of ethyl cyanoacrylate in the presence of polyamide promotes molecular interactions between the components, which reduce the available hydrophilic moieties and render the final material hydrophobic. The wettability, morphology, and thermo-physical properties of the polymeric coatings were characterized. The materials developed in this work take advantage of the properties of both polymers in a single blend and above all, due to their hydrophobic nature and minimal water uptake, can extend the application range of the individual polymers where water repellency is required.

The generation of 3D networks of primary neurons is a big challenge in neuroscience. Here, a novel method is presented for a 3D neuronal culture on superhydrophobic (SH) substrates. How nano-patterned SH devices stimulate neurons to build 3D networks is investigated. Scanning electron microscopy and confocal imaging show that soon after plating neurites adhere to the nanopatterned pillar sidewalls and they are subsequently pulled between pillars in a suspended position. These neurons display an enhanced survival rate compared to standard cultures and develop mature networks with physiological excitability. These findings underline the importance of using nanostructured SH surfaces for directing 3D neuronal growth, as well as for the design of biomaterials for neuronal regeneration., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Interaction of polyethylene oxide (PEO) with transition metal triflates is a newly emerging research area due to its numerous application fields, such as thin-film power conversion devices and sensors. In the present study, we demonstrate, for the first time, that PEO can solvate silver triflate organic salts in large quantities when formic acid is used as a common solvent for both. Nanocomposites with unique structural and electrical properties are fabricated by simply drop casting formic acid solutions of PEO and silver triflate salts. We present a detailed experimental study on the characterization of morphological and electrical properties of PEO-silver triflate nanocomposite films as a function of silver triflate concentration and discuss their potential applications as humidity sensors. In particular, by increasing the concentration of the salt in the initial solution the morphological features of the formed nanocomposites can be varied from well defined microcrystals to amorphous nanofibers. Of special interest are the nanocomposite films fabricated from a 1:1 (PEO-unit:Ag(+)) molar ratio, since they consist of self-assembled nanofibrillar structures, which exhibit good electrical conductivity as well as highly repeatable sensitivity towards humidity.

The fabrication of porous Si-based Er-doped light-emitting devices is a very promising developing field for all-silicon light emitters. However, while luminescence of Er-doped porous silicon devices has been demonstrated, very little attention has been devoted to the doping process itself. We have undertaken a detailed study of this process, examining the porous silicon matrix from several points of view during and after the doping. In particular, we have found that the Er-doping process shows a threshold level which, as evidenced by the cross correlation of the various techniques used, does depend on the sample thickness and on the doping parameters.

A photo-polymerizable Bisphenol-A diglycidylether methacrylate resin was characterized by Fourier transform infrared spectroscopy after its irradiation under different conditions to identify the best curing. Bonding-agent free composites with particles of ball-milled glass, silica and titania at loading of 10 and 50%wt were prepared, and their viscoelastic properties investigated by dynamic mechanical analysis, in experimental conditions close to the working environment in the mouth. All composites showed good stability at the considered conditions. The stiffest composite was the silica one, which was based on the smallest primary particles. The storage moduli close to room temperature (25°C) and mastication frequency (1 Hz) were extracted as reference bending moduli for the materials, and compared to static compressive moduli measured by nanoindentation performed by atomic force microscopy.Nanoindentation showed qualitative results in agreement with dynamic mechanical analysis as to the ranking of different materials, while resulting in approximately two-fold elastic modulus.

Objectives: The purpose of this study was to characterize the surface morphology and the elastic properties of four dental restorative flowable composites currently on the market (Venus Diamond Flow, Vertise Flow, Filtex Supreme XT Flow, Surefil SDR Flow). Additionally, one adhesive system (Adhese One F) and one non-flowable composite (Venus Diamond) have also been characterized as the control materials., Methods: Surface morphology was studied by both scanning electron and atomic force microscopy, and the elastic modulus and the hardness measured by instrumented indentation. Grain analysis was performed on the microscopic images, and statistical analysis was carried out on the results of the nanoindentation measurements., Results: It was observed that Vertise, Filtek XT and Surefil SDR exhibit stiffness similar to the non-flowable Venus Diamond, whereas Venus Diamond Flow presents itself as the more compliant flowable composite, with Adhese showing intermediate stiffness. Grain analysis of the images confirmed the general rule that the mechanical properties improve with increasing filler loading, with the notable exception of Vertise Flow that shows modulus and hardness as high as 9.1±0.6 and 0.43±0.03GPa, respectively, for an estimated loading of only ∼40% by volume., Significance: Whereas generally flowable composites are confirmed not to possess sufficiently strong mechanical properties for bulk restorations, exceptions can eventually be found upon appropriate laboratory screening, as presently seems to be the case for Vertise Flow. However, real practice in actual restorations and respective clinical evaluation are required for final assessment of the suggested results., (Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

A 12-years-old female subject, without previous history of trauma, complained of mild low-back pain and right sciatic pain. At physical examination the ankle jerk was absent on the right and severe leg pain was elicited by the Lasègue test. No sensory or motor deficits were detectable. Computed tomography and nuclear magnetic resonance examinations showed a right paramedian L5/S1 disc prolapse, exerting a compressive action on the dural sac. Nonoperative, medical treatment was successful and a complete disappearance of symptoms was observed after 6 weeks, without recurrence during a 36-months follow-up.

99mTC HM-PAO SPECT brain imaging was performed during the headache-free period in 19 young migraineurs, affected by common migraine (CM, 10 cases), classic migraine (CLM, 6 cases) and hemiplegic migraine (HM, 3 cases). SPECT findings were negative in all 10 patients with CM, in 3 cases of CLM and in 2 cases of HM. Positive findings in the remaining 4 patients (3 cases of CLM and 1 of HM) showed a decreased tracer distribution in the temporo-occipital regions (2 cases) and parietal regions (2 cases): the two with decreased temporo-occipital perfusion reported prodromal symptoms exclusively contralateral to the areas of hypoperfusion. An impaired regional cerebral vascular autoregulation may exist even during headache-free intervals in patients suffering from classic and hemiplegic migraine.

Brain tumors represent 40% to 50% of all solid tumors in children under 18 years of age, with an average incidence of 2 to 5 cases per 100,000/annum. These tumors are gliomas in 60% to 70% of cases. The most common location is infratentorial (60% of cases), with cerebellar astrocytomas, medulloblastomas and brain stem gliomas occurring in equal measure (20%). Astrocytomas are the predominant form (25%) in the supratentorial compartment. This review analyses clinical symptoms and instrumental procedures for the diagnosis of various types of brain tumor, together with recommendations for their management based on controlled clinical trials.