Search

Integrated continuous manufacturing is entering the biopharmaceutical industry. The main drivers range from improved economics, manufacturing flexibility, and more consistent product quality. However, studies on fully integrated production platforms have been limited due to the higher degree of system complexity, limited process information, disturbance, and drift sensitivity, as well as difficulties in digital process integration. In this study, we present an automated end-to-end integrated process consisting of a perfusion bioreactor, CaptureSMB, virus inactivation (VI), and two polishing steps to produce an antibody from an instable cell line. A supervisory control and data acquisition (SCADA) system was developed, which digitally integrates unit operations and analyzers, collects and centrally stores all process data, and allows process-wide monitoring and control. The integrated system consisting of bioreactor and capture step was operated initially for 4 days, after which the full end-to-end integrated run with no interruption lasted for 10 days. In response to decreasing cell-specific productivity, the supervisory control adjusted the loading duration of the capture step to obtain high capacity utilization without yield loss and constant antibody quantity for subsequent operations. Moreover, the SCADA system coordinated VI neutralization and discharge to enable constant loading conditions on the polishing unit. Lastly, the polishing was sufficiently robust to cope with significantly increased aggregate levels induced on purpose during virus inactivation. It is demonstrated that despite significant process disturbances and drifts, a robust process design and the supervisory control enabled constant (optimum) process performance and consistent product quality.

Monoclonal antibodies (mAbs) and related recombinant proteins continue to gain importance in the treatment of a great variety of diseases. Despite significant advances, their manufacturing can still present challenges owing to their molecular complexity and stringent regulations with respect to product purity, stability, safety, and so forth. In this context, protein aggregates are of particular concern due to their immunogenic potential. During manufacturing, mAbs routinely undergo acidic treatment to inactivate viral contamination, which can lead to their aggregation and thereby to product loss. To better understand the underlying mechanism so as to propose strategies to mitigate the issue, we systematically investigated the denaturation and aggregation of two mAbs at low pH as well as after neutralization. We observed that at low pH and low ionic strength, mAb surface hydrophobicity increased whereas molecular size remained constant. After neutralization of acidic mAb solutions, the fraction of monomeric mAb started to decrease accompanied by an increase on average mAb size. This indicates that electrostatic repulsion prevents denatured mAb molecules from aggregation under acidic pH and low ionic strength, whereas neutralization reduces this repulsion and coagulation initiates. Limiting denaturation at low pH by d-sorbitol addition or temperature reduction effectively improved monomer recovery after neutralization. Our findings might be used to develop innovative viral inactivation procedures during mAb manufacturing that result in higher product yields.

European Journal of Pharmaceutics and Biopharmaceutics, 151, ISSN:0939-6411, ISSN:1873-3441

Aggregation of mAbs is a crucial concern with respect to their safety and efficacy. Among the various properties of protein aggregates, it is emerging that their size can potentially impact their immunogenicity. Therefore, stability studies of antibody formulations should not only evaluate the rate of monomer loss but also determine the size distribution of the protein aggregates, which in turn depends on the aggregation mechanism. Here, we study the aggregation behavior of different formulations of 2 monoclonal immunoglobulins (IgGs) in the temperature range from 5°C to 50°C over 52 weeks of storage. We show that the aggregation kinetics of both antibodies follow non-Arrhenius behavior and that the aggregation mechanisms change between 40°C and 5°C, leading to different types of aggregates. Specifically, for a given monomer conversion, dimer formation dominates at low temperatures, while larger aggregates are formed at higher temperatures. We further show that the stability ranking of different molecules as well as of different formulations is drastically different at 40°C and 5°C while it correlates better between 30°C and 5°C. Our findings have implications for the level of information provided by accelerated aggregation studies with respect to protein stability under storage conditions.

In this work, the adsorption behavior of the different charge isoforms of the same monoclonal antibody (mAb) on strong cation-exchange resins is analyzed. While charge isoforms of the same antibody mainly differ in their effective charge, the similar structure and size allows developing a simplified model, which describes the adsorption behavior of mAb charge isoforms independently of the number of isoforms with only four parameters. In contrast to classical model-based descriptions of the adsorption isotherm, the proposed work enables retrieving some physical meaning in the definition of the model parameters. These model parameters are determined for several resin-antibody combinations. Thereby it is found that for mAbs on commercial cation exchangers an effective resin charge density of 0.22 ± 0.08 mmol mL-1 of solid phase is used for protein binding, which was found to be independent of the absolute resin charge density measured by titration. The presented results help to understand the adsorption behavior of mAbs on cation-exchangers, which is applicable both for the isolation of the main charge isoform or for preserving a certain charge isoform pattern during the polishing processes.