Search

Abstract: We report in this work the preparation and characterization of hybrid materials from a novel tin(IV) alkoxodimer of formula [Sn(OPr i )2(O2CC(CH3)CH2)2]2 (OPr i =(CH3)2CHO) whose structure has been determined by X-ray diffraction and NMR spectroscopy. This molecule has been used as a nanobuilding block in the preparation of new hybrid materials by combining it with several organic monomers, like methyl methacrylate, ethyl acrylate and styrene, at different molar ratios. The obtained polymers have been characterized by several techniques. The results show that the dimer is incorporated in the polymer network by organic bonds that cross-link the polymer chains very efficiently. Consequently, the incorporation of the cluster has improved the thermal properties of the parent polymer allowing their modulation by adjusting the concentration of the cluster. [Copyright &y& Elsevier]

Abstract: We report on extinction measurements of photo-induced Ti3+ centres in titanium oxide gels and gel-based organic–inorganic hybrids. Simultaneous absorption and EPR experiments have been carried out. Despite of an expected heterogeneous origin of the absorption band, the electronic traps population is found pure statistical: it can be characterised by effective extinction coefficients (gel) and (hybrid) in the maximum of the absorption continua, respectively, at 600nm and 640nm. Using these values, an extremely high concentration of long-lived trapped electron exceeding 1020 cm−3 has been evidenced in these materials. [Copyright &y& Elsevier]

Noble metal nanostructured films are of great interest for various applications including electronics, photonics, catalysis, and photocatalysis. Yet, structuring and patterning noble metals, especially those of the platinum group, is challenging by conventional nanofabrication. Herein, an approach based on solution processing to obtain metal-based films (rhodium, ruthenium (Ru) or iridium in the presence of residual organic species) with nanostructuration at the 20 nm-scale is introduced. Compared to existing approaches, the dual functionality of block-copolymers acting both as structuring and as reducing agent under inert atmosphere is exploited. A set of in situ techniques has allowed for the capturing of the carbothermal reduction mechanism occurring at the hybrid organic/inorganic interface. Differently from previous literature, a two-step reduction mechanism is unveiled with the formation of a carbonyl intermediate. From a technological point of view, the materials can be solution-processed on a large scale by dip-coating as polymers and simultaneously structured and reduced into metals without requiring expensive equipment or treatments in reducing atmosphere. Importantly, the metal-based films can be patterned directly by block-copolymer lithography or by soft-nanoimprint lithography on various substrates. As proof-of-concept of application, the authors demonstrate that nanostructured Ru films can be used as efficient catalysts for H 2 generation into microfluidic reactors., (© 2021 Wiley-VCH GmbH.)

Metal-assisted chemical etching (MACE) has emerged as an effective method to fabricate high aspect ratio nanostructures. This method requires a catalytic mask that is generally composed of a metal. Here, we challenge the general view that the catalyst needs to be a metal by introducing oxide-assisted chemical etching (OACE). We perform etching with metal oxides such as RuO 2 and IrO 2 by transposing materials used in electrocatalysis to nanofabrication. These oxides can be solution-processed as polymers exhibiting similar capabilities of metals for MACE. Nanopatterned oxides can be obtained by direct nanoimprint lithography or block-copolymer lithography from chemical solution on a large scale. High aspect ratio silicon nanostructures were obtained at the sub-20 nm scale exclusively by cost-effective solution processing by halving the number of fabrication steps compared to MACE. In general, OACE is expected to stimulate new fundamental research on chemical etching assisted by other materials, providing new possibilities for device fabrication.

Despite the promise of utilizing metal-organic frameworks (MOFs) as highly tunable photocatalytic materials, systematic studies that interrogate the relationship between their catalytic performances and the amount of functionalized linkers are lacking. Aminated linkers are known to enhance the absorption of light and afford photocatalysis with MOFs under visible-light irradiation. However, the manner in which the photocatalytic performances are impacted by the amount of such linkers is poorly understood. Here, we assess the photocatalytic activity of MIL-125, a TiO 2 /1,4-benzenedicarboxylate (bdc) MOF for the oxidation of benzyl alcohol to benzaldehyde when increasing amounts of bdc-NH 2 linkers (0%, 20%, 46%, 70%, and 100%) are incorporated in the framework. Analytical TEM allowed assessing the homogeneous localization of bdc-NH 2 in these mixed-linker MOFs. Steady state reaction rates reveal two regimes of catalytic performances: a first linear regime up to ∼50% bdc-NH 2 into the hybrid framework whereby increased amounts of bdc-NH 2 yielded increased photocatalytic rates, followed by a plateau up to 100% bdc-NH 2 . This unexpected "saturation" of the catalytic activity above ∼50% bdc-NH 2 content in the framework whatever the wavelength filters used demonstrates that amination of all linkers of the MOF is not required to obtain the maximum photocatalytic activity. This is rationalized on the basis of mixed-valence Ti 3+ /Ti 4+ intermediate catalytic centers revealed by electron spin resonance (ESR) measurements and recent knowledge of lifetime excited states in MIL-125-type of solids.

Research on nanomaterials and nanostructured materials is burgeoning because their numerous and versatile applications contribute to solve societal needs in the domain of medicine, energy, environment and STICs. Optimizing their properties requires in-depth analysis of their structural, morphological and chemical features at the nanoscale. In a transmission electron microscope (TEM), combining tomography with electron energy loss spectroscopy and high-magnification imaging in high-angle annular dark-field mode provides access to all features of the same object. Today, TEM experiments in three dimensions are paramount to solve tough structural problems associated with nanoscale matter. This approach allowed a thorough morphological description of silica fibers. Moreover, quantitative analysis of the mesoporous network of binary metal oxide prepared by template-assisted spray-drying was performed, and the homogeneity of amino functionalized metal-organic frameworks was assessed. Besides, the morphology and internal structure of metal phosphide nanoparticles was deciphered, providing a milestone for understanding phase segregation at the nanoscale. By extrapolating to larger classes of materials, from soft matter to hard metals and/or ceramics, this approach allows probing small volumes and uncovering materials characteristics and properties at two or three dimensions. Altogether, this feature article aims at providing (nano)materials scientists with a representative set of examples that illustrates the capabilities of modern TEM and tomography, which can be transposed to their own research.

For more than 5000 years, organic-inorganic composite materials created by men via skill and serendipity have been part of human culture and customs. The concept of "hybrid organic-inorganic" nanocomposites exploded in the second half of the 20th century with the expansion of the so-called "chimie douce" which led to many collaborations between a large set of chemists, physicists and biologists. Consequently, the scientific melting pot of these very different scientific communities created a new pluridisciplinary school of thought. Today, the tremendous effort of basic research performed in the last twenty years allows tailor-made multifunctional hybrid materials with perfect control over composition, structure and shape. Some of these hybrid materials have already entered the industrial market. Many tailor-made multiscale hybrids are increasingly impacting numerous fields of applications: optics, catalysis, energy, environment, nanomedicine, etc. In the present feature article, we emphasize several fundamental and applied aspects of the hybrid materials field: bioreplication, mesostructured thin films, Lego-like chemistry designed hybrid nanocomposites, and advanced hybrid materials for energy. Finally, a few commercial applications of hybrid materials will be presented.

For many important applications, the performance of polymer-anisotropic particle nanocomposite materials strongly depends on the orientation of the nanoparticles. Using the very peculiar magnetic properties of goethite (α-FeOOH) nanorods, we produced goethite-poly(hydroxyethyl methacrylate) nanocomposites in which the alignment direction and the level of orientation of the nanorods could easily be tuned by simply adjusting the intensity of a magnetic field applied during polymerization. Because the particle volume fraction was kept low (1-5.5 vol %), we used the orientational order induced by the field in the isotropic phase rather than the spontaneous orientational order of the nematic phase. At the strongest field values (up to 1.5 T), the particles exhibit almost perfect antinematic alignment, as measured by optical birefringence and small-angle X-ray scattering. The results of these two techniques are in remarkably good agreement, validating the use of birefringence measurements for quantifying the degree of orientational order. We also demonstrate that the ordering induced by the field in the isotropic suspension is preserved in the final material after field removal. This work illustrates the interest, for such problems, of considering the field-induced alignment of anisotropic nanoparticles in the isotropic phase, an approach that is effective at low filler content, that avoids the need of controlling the nematic texture, and that allows tuning of the orientation level of the particles at will simply by adjusting the field intensity.

Herein we discuss band gap modification of MIL-125, a TiO2/1,4-benzenedicarboxylate (bdc) metal-organic framework (MOF). Through a combination of synthesis and computation, we elucidated the electronic structure of MIL-125 with aminated linkers. The band gap decrease observed when the monoaminated bdc-NH2 linker was used arises from donation of the N 2p electrons to the aromatic linking unit, resulting in a red-shifted band above the valence-band edge of MIL-125. We further explored in silico MIL-125 with the diaminated linker bdc-(NH2)2 and other functional groups (-OH, -CH3, -Cl) as alternative substitutions to control the optical response. The bdc-(NH2)2 linking unit was predicted to lower the band gap of MIL-125 to 1.28 eV, and this was confirmed through the targeted synthesis of the bdc-(NH2)2-based MIL-125. This study illustrates the possibility of tuning the optical response of MOFs through rational functionalization of the linking unit, and the strength of combined synthetic/computational approaches for targeting functionalized hybrid materials.

Titanium oxo-clusters, well-defined monodispersed nano-objects, are appropriate nano-building blocks for the preparation of organic-inorganic materials by a bottom up approach. This critical review proposes to present the different structures of titanium oxo-clusters referenced in the literature and the different strategies followed to build up hybrid materials with these versatile building units. In particular, this critical review cites and reports on the most important papers in the literature, concentrating on recent developments in the field of synthesis, characterization, and the use of titanium oxo-clusters for the construction of advanced hybrid materials (137 references).

Achieving nanostructured or hierarchical hybrid architectures involves cross-cutting synthetic strategies where all facettes of chemistry (organic, polymers, solid-state, physical, materials chemistries, biochemistry, etc..), soft matter and ingenious processing are synergistically coupled. These cross-cutting approaches are in the vein of bio-inspired synthesis strategies where the integration of different areas of expertise allows the development of complex systems of various shapes with perfect mastery at different size scales, composition, porosity, functionality, and morphology. These strategies coined "Integrative Chemistry" open a land of opportunities to create advanced hybrid materials with organic-inorganic or bio-inorganic character. These hybrid materials represent not only a new field of basic research where creative chemists can express themselves, but also, via their remarkable new properties and multifunctional nature, hybrids are allowing the emergence of innovative industrial applications in extremely diverse fields.

Titanium is a very attractive candidate for MOFs due to its low toxicity, redox activity, and photocatalytic properties. We present here MIL-125, the first example of a highly porous and crystalline titanium(IV) dicarboxylate (MIL stands for Materials of Institut Lavoisier) with a high thermal stability and photochemical properties. Its structure is built up from a pseudo cubic arrangement of octameric wheels, built up from edge- or corner-sharing titanium octahedra, and terephthalate dianions leading to a three-dimensional periodic array of two types of hybrid cages with accessible pore diameters of 6.13 and 12.55 A. X-ray thermodiffractometry and thermal analysis show that MIL-125 is stable up to 360 degrees C under air atmosphere while nitrogen sorption analysis indicates a surface area (BET) of 1550 m(2) x g(-1). Moreover, under nitrogen and alcohol adsorption, MIL-125 exhibits a photochromic behavior associated with the formation of stable mixed valence titanium-oxo compounds. The titanium oxo cluster are back oxidized in the presence of oxygen. This photochemical phenomenon is analyzed through the combined use of Electron Spin Resonance (ESR) and UV-visible absorption spectroscopies. The photogenerated electrons are trapped as Ti(III) centers, while a concomitant oxidation of the adsorbed alcohol molecules occurs. This new microporous hybrid is a very promising candidate for applications in smart photonic devices, sensors, and catalysis.

New hybrid nanocomposites based on a methacrylate functionalized titanium-oxo cluster as nano-cross-linker show improved mechanical properties, optical transparency and photochromic activity.

Oxo alcoxo metallic clusters can be employed as inorganic nanobuilding blocks to obtain well-defined organic-inorganic hybrid materials. A better understanding of the surface reactivity of the clusters should allow optimization of the elaboration of hybrid materials through a better control of the hybrid interface. The oxo alcoxo cluster Ti(16)O(16)(OEt)32 presents a shell of labile ethoxy groups that can be selectively transalcoholyzed with preservation of the titanium oxo core, leading to new oxo alcoxo clusters Ti(16)O(16)(OEt)32-x(OR)x (R: alkyl, phenyl, styrenic, etc. groups). The reactivity of the Ti(16)O(16)(OEt)32 cluster toward aliphatic and aromatic alcohols is investigated to determine both the kinetics and the number of substituted titanium atoms, which are strongly dependent on the nature of the alcohol. Characterization of the organic modification of the cluster is performed in situ by liquid (13)C NMR measurements, using the molecular structures of two new clusters, Ti(16)O(16)(OEt)28(OnPr)4 and Ti(16)O(16)(OEt)(24)(OnPr)(8) (OnPr = propoxy groups), as references. The structures of these clusters have been established using single-crystal X-ray diffraction. Moreover, a complete spectroscopic assignment of each ethoxy group is proposed after combining crystallographic data, (13)C NMR T(1) relaxation measurements, and (1)H-(1)H, (1)H-(13)C 2D NMR experiments. Finally, the cluster is functionalized with polymerizable ligands via transalcoholysis and transesterification reactions using hydroxystyrene and acetoxystyrene.