Search

We demonstrate the strengthening of graphene, an atomically thin carbon allotrope, by out-of-plane folding. Through lateral confinement of graphene at the water–air interface, nanoscale buckling was induced in suspended flakes, leading to an unexpected folding transition beyond a critical surface pressure. The emergence of folding was confirmed by in situ Brewster angle reflectivity and ex situ microscopy, showing a unique "z-laminated" nanostructure. Molecular dynamics simulations indicate that z-lamination yields an enhanced adhesion between neighboring flakes compared to lateral sliding, which was confirmed by a surface pressure hysteresis during the folding process. Mechanical testing reveals superior Young's modulus and yield strength when compared to conventional graphene assemblies and even compared to composites. We demonstrate the potential of the z-lamination approach for applications in graphene-based structural materials, tribological layers, and functional electrochemical coatings. Finally, the complete recyclability of z-laminated graphene opens up new routes toward sustainable nanostructured materials. [ABSTRACT FROM AUTHOR]

Intervertebral disc degeneration (IDD) is closely related to changes in the intervertebral disc (IVD) composition and the resulting viscoelastic properties. IDD is a severe condition because it decreases the disc's ability to resist mechanical loads. Our research aims to understand IDD at the cellular level, specifically the changes in the viscoelastic properties of the nucleus pulposus (NP), which are poorly understood. This study employed a system integrating nanoindentation with Raman spectrometry to correlate biomechanics with subtle changes in the biochemical makeup of the NP. The characterization was, in turn, correlated with the degenerative severity of IVD as assessed using magnetic resonance imaging (MRI) of different patients with spinal stenosis, degenerative spondylolisthesis, and degenerative scoliosis. It is shown that there is an increase in the crosslinking ratio in collagen, a reduction in proteoglycan, and a build‐up of minerals upon the rise in the severity level of the disc damage in the NP. Assessment of mechanical characteristics reveals that the increasing disc degeneration makes the NP lose its elasticity, becoming more viscous. This shows that the tissue undergoes abnormalities in weight‐bearing ability, which contributes to spinal instability. The correlation of the individual discs shows that grades III and IV have similarities in the changes of Amide I and III toward the storage modulus. In contrast, grades IV and V correlate with mineralization toward the storage modulus. Reduction of proteoglycan has the highest impact on the changes of the storage modulus in all grades of IDD. Connecting compositional alterations to IVD micromechanics at various degrees of degeneration expands our understanding of tissue behavior and provides critical insight into clinical diagnostics, treatment, and tissue engineering. [ABSTRACT FROM AUTHOR]

A model based uniquely on condensed phase reactions coupled with the thermal equation is developed to study the initiation and early stage of the redox reaction in Al/CuO nanothermites. It considers the effect of a wetting contact angle between Al and CuO particles, which may be induced by sintering mechanisms and/or the synthesis method. In order to validate the model, two published experiments are reproduced in silico. Results provide the first quantification of: (i) how sintering affects the initiation of Al/CuO nanoparticle mixtures, depending on experimental conditions, (ii) the extent to which condensed phase mechanisms dominate gas-mediated reactions in the initiation process, two subjects that have been highly debated in the literature. It was found that initiation appears more strongly affected by sintering when particles are exposed to an ultra-short and intense heat pulse (∼1011 K s−1) than those exposed to a lower heating rate (∼105 K s−1). Additionally, calculations show that sintering may cause a drastic decrease in the initiation delay (down to the ns regime) when using CuO nanoparticles below 50 nm in diameter that can be brought to melting temperature through optical absorption. Finally, the role of gas-surface versus condensed phase reactions in the Al/CuO initiation process is evaluated theoretically. Initiation through condensed phase reactions, while slightly faster and more efficient, exhibits a comparable timescale (∼1–2 ms) to initiation through gas-surface reactions, providing clear evidence for the contribution of both during the initiation phase. [ABSTRACT FROM AUTHOR]

A tissue preparation method will inevitably alter the tissue content. This study aims to evaluate how different common sample preparation methods will affect the tissue morphology, biomechanical properties, and chemical composition of samples. The study focuses on intervertebral disc (IVD) tissue; however, it can be applied to other soft tissues. Raman spectroscopy synchronized with nanoindentation instrumentation was employed to investigate the compositional changes of IVD, specifically, nucleus pulposus (NP) and annulus fibrosus (AF), together with their biomechanical properties of IVD. These properties were examined through the following histological specimen types: fresh cryosection (control), fixed cryosection, and paraffin-embedded. The IVD tissue could be located using an optical microscope under three different preparation methods. Paraffin-embedded samples showed the most explicit details where the lamellae structure of AF could be identified. In terms of biomechanical properties, there was no significant difference between the fresh and fixed cryosection (p > 0.05). In contrast, the fresh cryosection and paraffin-embedded samples showed a significant difference (p < 0.05). It was also found that the tissue preparations affected the chemical content of the tissues and structure of the tissue, which are expected to contribute to biomechanical properties changes. Fresh cryosection and fixed cryosection samples are more promising to work with for biomechanical assessment in histological tissues. The findings fill essential gaps in the literature by providing valuable insight into the characteristics of IVD at the microscale. This study can also become a reference for a better approach to assessing the mechanical properties and chemical content of soft tissues at the microscale. [ABSTRACT FROM AUTHOR]

Thermite multilayered films have the potential to be used as local high intensity heat sources for a variety of applications. Improving the ability of researchers to more rapidly develop Micro Electro Mechanical Systems devices based on thermite multilayer films requires predictive modeling in which an understanding of the relationship between the properties (ignition and flame propagation), the multilayer structure and composition (bilayer thicknesses, ratio of reactants, and nature of interfaces), and aspects related to integration (substrate conductivity and ignition apparatus) is achieved. Assembling all these aspects, this work proposes an original 2D diffusion-reaction modeling framework to predict the ignition threshold and reaction dynamics of Al/CuO multilayered thin films. This model takes into consideration that CuO first decomposes into Cu2O, and then, released oxygen diffuses across the Cu2O and Al2 O3 layers before reacting with pure Al to form Al2O3. This model is experimentally validated from ignition and flame velocity data acquired on Al/CuO multilayers deposited on a Kapton layer. This paper discusses, for the first time, the importance of determining the ceiling temperature above which the multilayers disintegrate, possibly before their complete combustion, thus severely impacting the reaction front velocity and energy release. This work provides a set of heating surface areas to obtain the best ignition conditions, i.e., with minimal ignition power, as a function of the substrate type. [ABSTRACT FROM AUTHOR]

The ignition of the Al/CuO multilayered material is studied experimentally to explore the effects of the heating surface area, layering, and film thickness on the ignition characteristics and reaction performances. After the description of the micro-initiator devices and ignition conditions, we show that the heating surface area must be properly calibrated to optimize the nanothermite ignition performances. We demonstrated experimentally that a heating surface area of 0.25 mm2 is sufficient to ignite a multilayered thermite film of 1.6 mm wide by a few cm long, with a success rate of 100%. A new analytical and phenomenological ignition model based on atomic diffusion across layers and thermal exchange is also proposed. This model considers that CuO first decomposes into Cu2O, and then the oxygen diffuses across the Cu2O and Al2O3layers before reaching the Al layer, where it reacts to form Al2O3. The theoretical results in terms of ignition response times confirm the experimental observation. The increase of the heating surface area leads to an increase of the ignition response time and ignition power threshold (go/no go condition). We also provide evidence that, for any heating surface area, the ignition time rapidly decreases when the electrical power density increases until an asymptotic value. This time point is referred to as the minimum response ignition time, which is a characteristic of the multilayered thermite itself. At the stoichiometric ratio (Al thickness is half of the CuO thickness), the minimum ignition response time can be easily tuned from 59 μs to 418 ms by tuning the heating surface area. The minimum ignition response time increases when the bilayer thickness increases. This work not only provides a set of micro-initiator design rules to obtain the best ignition conditions and reaction performances but also details a reliable and robust MicroElectroMechanical Systems process to fabricate igniters and brings new understanding of phenomena governing the ignition process of Al/CuO multilayers. [ABSTRACT FROM AUTHOR]