Search

This work reports the possibility of uranium recovery from a post-mining uranium ore dump in Poland by a bioleaching method. The studies were conducted on the dump leaching model with the mass of 570 kg of uranium bearing mineral material from Radoniów pile and in the periodic bioreactor with a work volume of 80 dm3 and with mechanical mixing and aeration of the charge. The uranium concentration in the examined material was about 800 ppm. In this process, the consortium of microorganisms isolated from former mines was used. It was composed of the following microorganisms: Bacillius, Pseudomonas, Sphingomonas, Thiobacillus, Halothiobacillus, Thiomonas, and Geothrix. The efficiency of the uranium bioleaching process was 98% in the reactor, and a yield of 70% was obtained in the dump leaching model. The post-leaching solution contained significant amounts of uranium ions that were separated in two stages: (1) by ion chromatography and then (2) by a two-step precipitation method. The resulting solution was a source of ammonium diuranate, the precursor of yellowcake (uranium oxides).

In this paper, the possibility to obtain an alternative source of energy from methane fermentation, catalysed by biomass, has been discussed in detail. As a main substrate, the distillation residue from the distillery industry was taken in the case of mono-fermentation and its co-fermentation with sewage sludge. The results showed that higher biogas and methane production can be obtained in a mono-fermentation process. Fermentation lasted for 23 days, and during this time, 333.14 and 249.64 L/kg VS of the total biogas for mono- and co-fermentation was subsequently obtained, which gives around 63% and 50% of methane in both types of the process, respectively. Additionally, to interpret the experimental data obtained and to predict the trend of the accumulation curves, a simple Gompertz model has been applied. The application of the Gompertz model has enabled us to estimate some important parameters with a strict physical meaning, namely, the maximum production value of the biogas and its components, the production rate of a given gas, as well as the incubation phase time. Finally, an approximate analysis of the potential volume of biogas production was also carried out, based on the mass of distillation residue produced annually in Poland. [ABSTRACT FROM AUTHOR]