Search

Global demand for fossil fuels has increased the importance of flow measurement in the oil sector. As a result, a new submarket in the flowmeter business has opened up. To improve the accuracy of gamma-based two-phase flowmeters, this study employs time-feature extraction methods, a particle swarm optimization (PSO) based feature selection system, and an artificial neural network. This article proposes a fraction detection system that uses a 137Cs gamma source, two NaI detectors for recording the photons, and a Pyrex-glass pipe between them. The Monte Carlo N Particle method was used to simulate the geometry mentioned above. Thirteen time-domain features were extracted from the raw data recorded by both detectors. Optimal characteristics were identified with the help of PSO. This procedure resulted in the identification of eight efficient features. The input-output relationship was approximated using a Multi-Layer Perceptron (MLP) neural network. The innovation of the present research is in the use of a feature extraction technique based on the PSO algorithm to determine volume percentages, with results such as: (1) introducing eight appropriate time characteristics in determining volume percentages; (2) achieving an accuracy of less than 0.37 in root mean square error (RMSE) and 0.14 in mean square error (MSE) while predicting the volume fraction of components in a gas-liquid two-phase flow; and (3) reducing the calculation load. Utilizing optimization-based feature selection techniques has allowed for the selection of meaningful inputs, which has decreased the volume of computations while boosting the precision of the presented system. [ABSTRACT FROM AUTHOR]

A Wilkinson power divider (WPD) with good novelty has been presented in this letter. To achieve this design, each quarter‐wavelength lines of the conventional WPD have been replaced by two symmetrical comb‐shaped resonators. These resonators create two rejection bands near their passbands, which can guarantee a good harmonics suppression for a power divider. By applying and computing the even‐/odd‐modes analysis, the suggested PD has been analyzed. In the proposed PD, the extra harmonics from second to 10th are suppressed. The normalized circuit size for operation in the center frequency of 1.1 GHz is about 0.06 × 0.07 λg. Eventually, fabrication of the power divider has been done on Rogers type RT‐Duroid 5880 substrate and tested. The measured return loss is about 16 dB in the fundamental frequency. The obtained experimental S‐parameters validated the primal design results. Therefore, the proposed WPD is a high performance one, which can be applied for applications such as the signal splitter in a Doherty power amplifier. [ABSTRACT FROM AUTHOR]

Measuring the volume fraction of different types of fluids with two or three phases is so vital. Among all available methods, two of them, capacitance-based and gamma-ray attenuation, are so popular and widely used. Moreover, nowadays, AI which stands for Artificial Intelligence can be seen almost in all areas, and the measuring section is no exception. In this paper, the main goal is to predict the volume fraction of a three-phase homogeneous fluid which contains water, oil, and gas materials. To opt for an optimised method, a combination of capacitance-based sensors, gamma-ray attenuation sensor and Artificial Neural Networks (ANN) is utilised. To train the proposed metering system which is a MLP type, two inputs are considered. For the first input, the concave sensor is simulated in COMSOL Multiphysics software and different combinations of three phases (different volume fractions) are applied. Then through theoretical investigations of gamma-ray sensor, Barium-133 which radiates 0.356 MeV is used. This way, the second required input is generated. Finally, to implement a new and accurate metering system, a number of networks with different characteristics are run in the MATLAB software. The best structure had a Mean Absolute Error (MAE) equal to 0.33, 3.68 and 3.75 for the water, gas and oil phases, respectively. The accuracy of the presented metering system is illustrated by the received outcomes. The novelty of this study is proposing a new combined method that can measure a three-phase homogeneous fluid’s volume fractions containing water, gas and oil, precisely. [ABSTRACT FROM AUTHOR]