Search

It has been widely recognized that the combination of carbon nanotube (CNT) and liquid crystals (LCs) not only provides a useful way to align CNTs, but also dramatically enhances the order in the LC phases, which is especially useful in liquid crystal display (LCD) technology. As the measure of this phase behavior, the complex specific heat is presented over a wide temperature range for a negative dielectric anisotropy alkoxyphenylbenzoate liquid crystal (9OO4) and CNT composites as a function of CNT concentration. The calorimetric scans were performed under near-equilibrium conditions between 25 and 95°C, first cooling and then followed by heating for CNT weight percent ranging from ɸw = 0 to 0.2. All 9OO4/CNT mesophases have transition temperatures ~1 K higher and a crystallization temperature 4 K higher than that of the pure 9OO4. The crystal phase superheats until a strongly first-order specific heat feature is observed, 0.5 K higher than in the pure 9OO4. The transition enthalpy for the nanocomposite mesophases is 10% lower than that observed in the pure 9OO4. The strongly first-order crystallization and melting transition enthalpies are essentially constant over this range of ɸw. Complementary electroclinic measurement on a 0.05 wt. % sample, cooling towards the smectic-C phase from the smectic-A, indicates that the SmA-SmC transition remains mean-field-like in the presence of the CNTs. Given the homogeneous and random distribution of CNTs in these nanocomposites, we interpret these results as arising from the LC-CNT surface interaction pinning the orientational order uniformly along the CNT, without pinning the position of the 9OO4 molecule, leading to a net ordering effect for all phases. These effects of incorporating CNTs into LCs are likely due to "anisotropic orientational" coupling between CNT and LC, the change in the elastic properties of composites and thermal anisotropic properties of the CNTs. [ABSTRACT FROM AUTHOR]

The magnetic field induced birefringence in isotropic aqueous suspensions of tobacco mosaic virus (TMV) was measured as a function of temperature and concentration in high magnetic fields (100 kG). The temperature range was between 15 and 50 °C and the concentration range was between 4 and 20 mg/cm3. We find that the Cotton–Mouton constant (C) increases with decreasing temperature by 15%–20% over the entire range and extrapolates to infinity at a finite temperature of 110 to 150 K. At constant temperature, the measured ρ/C(ρ=number of TMV particles per cm3 of suspension) can be expanded in a power series of ρ, where the coefficients are expressed by the irreducible cluster integrals. At 20 °C the experimental values can be fitted to the linear form: ρ/λC=(2.09×1030–1.35×1015ρ)G2/cm3. For rigid cylindrical particles with l=3000 Å and d=180 Å, and using the rigid hard particle interaction model, we find for the first order coefficient 0.62×1015, i.e., a significant deviation for the rigid hard-rod model. This deviation is also indicated by the variation of C with temperature. We discuss the results on TMV and of similar measurements on phage fd in terms of the interparticle interaction and rigidity of the particles. [ABSTRACT FROM AUTHOR]

A thin Smectic-A liquid crystal (LC) film is deposited on a polymer vinyl alcohol-coated substrate that had been scribed with a uniform easy axis pattern over a square of side length L ≤ 85 μm. The small size of the patterned region facilitates material distribution to form either a hill (for a thin film) or divot (for a thick film) above the scribed square and having an oily streak (OS) texture. Optical profilometry measurements vs. film thickness suggest that the OS structure aims to adopt a preferred thickness z 0 that depends on the nature of the molecule, the temperature, and the surface tension at the air interface. We present a phenomenological model that estimates the energy cost of the OS layer as its thickness deviates from z 0 .

Although burnout has been increasingly well studied among medical (nurses, physicians, residents) and mental health providers (psychologists, psychiatrists, social workers), there continues to be a lack of attention on the well-being of community-based providers, such as Community Health Workers (CHWs), within the United States. Using cross-sectional data from 75 CHWs employed in 14 agencies funded through the Maternal and Infant Community Health Collaboratives Initiative (MICHC) in New York, our study examined predictors (anxiety, physical health, adverse childhood experiences, job satisfaction, role certainty, demographic and work characteristics) of burnout, compassion fatigue (CF) and compassion satisfaction (CS). Descriptive statistics were used to characterize our sample and linear regression was employed to investigate the correlates of burnout, CF and CS. Results indicated that CHWs with higher levels of anxiety and lower job satisfaction were more likely to have higher burnout scores. CHWs with higher levels of anxiety, lower job satisfaction and fewer days of poorer health were more likely to report higher CF. Those who worked more than 35 h per week were less likely to report higher CS. The study provides recommendations for organizational-level interventions to address risk factors of burnout and CF and promote CS among CHWs, such as bolstering supervision, encouraging greater communication, offering recognition/appreciation of CHWs and creating opportunities for self-care. Findings should be considered when designing organizational-level preventive measures that mitigate burnout and CF and promote CS., (© 2022 Wiley Periodicals LLC.)

Our cross-sectional study seeks to understand how COVID-19 stigma, race/ethnicity [Asian, Black, Hispanic/Latinx, white] and residency [New York City (NYC) resident vs. non-NYC resident] associated with depression. Our sample includes 568 participants: 260 (45.77%) were NYC residents and 308 (54.3%) were non-NYC residents. A series of multiple linear regression were run to examine the relationship between race/ethnicity, COVID-19 stigma, and depressive symptoms. Irrespective of residency, older age and ever being diagnosed with COVID-19 were negatively associated with depressive symptoms. Stigma and thinking less of oneself significantly associates with depressive symptoms across residency. Our study expects to benefit mental health care providers and public health professionals in designing best practices to mitigate stigma in ongoing or future pandemics.

A patterned surface defect of strength m = +1 and its associated disclination lines can decompose into a pair of surface defects and disclination lines of strength m = +1/2. For a negative dielectric anisotropy liquid crystal subjected to an applied ac electric field E , these half-integer defects are observed to wobble azimuthally for E > than some threshold field and, for sufficiently large fields, to co-revolve antipodally around a central point approximately midway between the two defects. This behavior is elucidated experimentally as a function of applied field strength E and frequency ν , where the threshold field for full co-revolution scales as ν 1/2 . Concurrently, nematic electrohydrodynamic instabilities were investigated. A complete field vs. frequency "phase diagram" compellingly suggests that the induced fluctuations and eventual co-revolutions of the ordinarily static defects are coupled strongly to-and driven by-the presence of the hydrodynamic instability. The observed behaviour suggests a Lehmann-like mechanism that drives the co-revolution.

A topography in a Newtonian fluid occurs if there is a disturbance near the surface. But what if there is no such disturbance? We show by optical profilometry that a thin nematic film resting on a topological-defect-patterned substrate can exhibit a hill or divot at the opposing free (air) interface in the absence of a topological disturbance at that interface. We propose a model that incorporates several material properties and that predicts the major experimental features. This work demonstrates the importance of, in particular, anisotropic surface interactions in the creation of a free-surface topography.

An escaped radial director profile in a nematic liquid crystal cell can be transformed into a pair of strength m = +1/2 surface defects (and their associated disclination lines) at a threshold electric field. Analogously, a half-integer defect pair can be transformed at a threshold electric field into a director profile that escapes into the third dimension. These transitions were demonstrated experimentally and numerically, and are discussed in terms of topologically discontinuous and continuous pathways that connect the two states. Additionally, we note that the pair of disclination lines associated with the m = +1/2 surface defects were observed to co-rotate around a common point for a sufficiently large electric field at a sufficiently low frequency.

Topological defects appear in symmetry breaking phase transitions and are ubiquitous throughout Nature. As an ideal testbed for their study, defect configurations in nematic liquid crystals (NLCs) could be exploited in a rich variety of technological applications. Here we report on robust theoretical and experimental investigations in which an external electric field is used to switch between pre-determined stable chargeless disclination patterns in a nematic cell, where the cell is sufficiently thick that the disclinations start and terminate at the same surface. The different defect configurations are stabilised by a master substrate that enforces a lattice of surface defects exhibiting zero total topological charge value. Theoretically, we model disclination configurations using a Landau-de Gennes phenomenological model. Experimentally, we enable diverse defect patterns by implementing an in-house-developed Atomic Force Measurement scribing method, where NLC configurations are monitored via polarised optical microscopy. We show numerically and experimentally that an "alphabet" of up to 18 unique line defect configurations can be stabilised in a 4x4 lattice of alternating s=±1 surface defects, which can be "rewired" multistably using appropriate field manipulation. Our proof-of-concept mechanism may lead to a variety of applications, such as multistable optical displays and rewirable nanowires. Our studies also are of interest from a fundamental perspective. We demonstrate that a chargeless line could simultaneously exhibit defect-antidefect properties. Consequently, a pair of such antiparallel disclinations exhibits an attractive interaction. For a sufficiently closely-spaced pair of substrate-pinned defects, this interaction could trigger rewiring, or annihilation if defects are depinned.

A substrate was patterned with two pairs of half-integer strength topological defects, (+1/2, +1/2) and (+1/2, -1/2). In a sufficiently thick cell, a disclination line runs in an arch above the substrate connecting the two half integer defects within each pair. The director around the disclination line for the like-sign pair must rotate in 3D, whereas for the opposite-sign defect pair the director lies in the xy-plane parallel to the substrate. For a negative dielectric anisotropy nematic, an electric field applied normal to the substrate drives the director into the xy-plane, forcing the arch of the disclination line of the like-sign pair to become extended along the z-axis. For sufficiently large field the arch splits, resulting in two nearly parallel disclination lines traversing the cell from one substrate to the other. The opposite-sign defect pair is largely unaffected by the electric field as the director already lies in the xy-plane. Experimental results are presented, which are consistent with numerical simulations.

Using a Landau-de Gennes approach, we study the impact of confinement topology, geometry and external fields on the spatial positioning of nematic topological defects (TDs). In quasi two-dimensional systems we demonstrate that a confinement-enforced total topological charge of m > 1/2 decays into elementary TDs bearing a charge of m = 1/2. These assemble close to the bounding substrate to enable essentially bulk-like uniform nematic ordering in the central part of a system. This effect is reminiscent of the Faraday cavity phenomenon in electrostatics. We observe that in certain confinement geometries, varying the correlation length size of the order parameter could trigger a global rotation of an assembly of TDs. Finally, we show that an external electric field could be used to drag the boojum fingertip towards the interior of the confinement cell. Assemblies of TDs could be exploited as traps for appropriate nanoparticles, opening several opportunities for the development of functional nanodevices.

Nematic cells patterned with square arrays of strength m = ±1 topological defects were examined as a function of cell thickness (3 < h < 7.5 μm), temperature, and applied voltage. Thicker cells tend to exhibit an escape or partial escape of the nematic director as a means of mitigating the elastic energy cost near the defect cores, whereas thinner cells tend to favor splitting of the integer defects into pairs of half-integer strength defects. On heating the sample into the isotropic phase and cooling back into the nematic, some apparently split defects can reappear as unsplit integer defects, or vice versa. This is consistent with the system's symmetry, which requires a first order transition between the two relaxation mechanisms.