Search

This work aims at constraining the size, shape, and geometric albedo of the dwarf planet candidate 2002 MS4 through the analysis of nine stellar occultation events. Using multichord detection, we also studied the object's topography by analyzing the obtained limb and the residuals between observed chords and the best-fitted ellipse. We predicted and organized the observational campaigns of nine stellar occultations by 2002 MS4 between 2019 and 2022, resulting in two single-chord events, four double-chord detections, and three events with three to up to sixty-one positive chords. Using 13 selected chords from the 8 August 2020 event, we determined the global elliptical limb of 2002 MS4. The best-fitted ellipse, combined with the object's rotational information from the literature, constrains the object's size, shape, and albedo. Additionally, we developed a new method to characterize topography features on the object's limb. The global limb has a semi-major axis of 412 $\pm$ 10 km, a semi-minor axis of 385 $\pm$ 17 km, and the position angle of the minor axis is 121 $^\circ$ $\pm$ 16$^\circ$. From this instantaneous limb, we obtained 2002 MS4's geometric albedo and the projected area-equivalent diameter. Significant deviations from the fitted ellipse in the northernmost limb are detected from multiple sites highlighting three distinct topographic features: one 11 km depth depression followed by a 25$^{+4}_{-5}$ km height elevation next to a crater-like depression with an extension of 322 $\pm$ 39 km and 45.1 $\pm$ 1.5 km deep. Our results present an object that is $\approx$138 km smaller in diameter than derived from thermal data, possibly indicating the presence of a so-far unknown satellite. However, within the error bars, the geometric albedo in the V-band agrees with the results published in the literature, even with the radiometric-derived albedo.

Infrared measurements of asteroids are crucial for the determination of physical and thermal properties of individual objects, and for the understanding of the small-body populations in the solar system as a whole. But standard radiometric methods can only be applied if the orbit of an object is known, hence its position at the time of the observation. We present MIRI observations of the outer-belt asteroid 10920 and an unknown object, detected in all 9 MIRI bands in close proximity to 10920. We developed a new method "STM-ORBIT" to interpret the multi-band measurements without knowing the object's true location. The method leads to a confirmation of radiometric size-albedo solution for 10920 and puts constraints on the asteroid's location and orbit in agreement with its true orbit. Groundbased lightcurve observations of 10920, combined with Gaia data, indicate a very elongated object (a/b >= 1.5), with a spin-pole at (l, b) = (178{\deg}, 81{\deg}), and a rotation period of 4.861191 h. A thermophysical study leads to a size of 14.5 - 16.5 km, a geometric albedo between 0.05 and 0.10, and a thermal inertia in the range 9 to 35 Jm-2s-0.5K-1. For the newly discovered MIRI object, the STM-ORBIT method revealed a size of 100-230 m. The new asteroid must be on a very low-inclination orbit and it was located in the inner main-belt region during JWST observations. A beaming parameter {\eta} larger than 1.0 would push the size even below 100 meter, a main-belt regime which escaped IR detections so far. These kind of MIRI observations can therefore contribute to formation and evolution studies via classical size-frequency studies which are currently limited to objects larger than about one kilometer in size. We estimate that MIRI frames with pointings close to the ecliptic and only short integration times of a few seconds will always include a few asteroids, most of them will be unknown objects., Comment: 17 pages, 10 figures, 4 tables, accepted for A&A publication on Nov 22, 2022

Cybele asteroids constitute an appealing reservoir of primitive material genetically linked to the outer Solar System, and the physical properties of the largest members can be readily accessed by large telescopes. We took advantage of the bright apparition of (65) Cybele in July and August 2021 to acquire high-angular-resolution images and optical light curves of the asteroid with which we aim to analyse its shape and bulk properties. 7 series of images acquired with VLT/SPHERE were combined with optical light curves to reconstruct the shape of the asteroid using the ADAM, MPCD, and SAGE algorithms. The origin of the shape was investigated by means of N-body simulations. Cybele has a volume-equivalent diameter of 263+/-3km and a bulk density of 1.55+/-0.19g.cm-3. Notably, its shape and rotation state are closely compatible with those of a Maclaurin equilibrium figure. The lack of a collisional family associated with Cybele and the higher bulk density of that body with respect to other large P-type asteroids suggest that it never experienced any large disruptive impact followed by rapid re-accumulation. This would imply that its present-day shape represents the original one. However, numerical integration of the long-term dynamical evolution of a hypothetical family shows that it is dispersed by gravitational perturbations and chaotic diffusion over Gyrs of evolution. The very close match between Cybele and an equilibrium figure opens up the possibility that D>260km small bodies from the outer Solar System all formed at equilibrium. However, we cannot rule out an old impact as the origin of the equilibrium shape. Cybele itself is found to be dynamically unstable, implying that it was recently (<1Ga) placed on its current orbit either through slow diffusion from a relatively stable orbit in the Cybele region or, less likely, from an unstable, JFC orbit in the planet-crossing region., Comment: 19 pages, 14 figures, 4 tables, accepted for publication in A&A

Extensive photometric surveys are and will continue producing massive amounts of data on small bodies. Usually, these data will be sparsely obtained at arbitrary (and unknown)rotational phases. Therefore, new methods to process such data need to be developed to make the most of those large catalogs. We aim to produce a method to create phase curves of small bodies considering the uncertainties introduced by the nominal errors in the magnitudes and the effect introduced by rotational variations. We use the SLOAN Moving Objects Catalog data as a benchmark to construct phase curves of all small bodies in there, in u', g', r', i', and z' filters. We will obtain from the phase curves the absolute magnitudes and set up with them the absolute colors, which are the colors of the asteroids not affected by changes in phase angle. We select objects with $\geq3$ observations taken in at least one filter and spanned over a minimum of 5 degrees in phase angle. We developed a method that combines Monte Carlo simulations and Bayesian inference to estimate the absolute magnitudes using the HG$_{12}^*$ photometric system. We obtained almost 15\,000 phase curves, about 12,000 including all five filters. The absolute magnitudes and absolute colors are compatible with previously published data, supporting our method. The method we developed is fully automatic and well suited to be run on large amounts of data. Moreover, it includes the nominal uncertainties in the magnitudes and the whole distribution of possible rotational states of the objects producing, possibly, less precise values, i.e., larger uncertainties, but more accurate, i.e., closer to the actual value. To our knowledge, this work is the first to include the effect of rotational variations in such a manner., Comment: 24 pages in referee format, 17 figures, online data available upon request, Table 2 available in CDS

On 4 March 2021 at 9 UTC a 30-m in diameter near-Earth asteroid 2021 DW1 passed the Earth at a distance of 570000 km, reaching the maximum brightness of V=14.6 mag. We observed it photometrically from 2 March, when it was visible at V=16.5 mag, until 7 March (V=18.2 mag). During that time 2021 DW1 swept a 170 degrees long arc in the northern sky, spanning solar phase angles in the range from 36 to 86 degrees. This made it an excellent target for physical characterisation, including spin axis and shape derivation. Convex inversion of the asteroid lightcurves gives a sidereal period of rotation P=0.013760 +/- 0.000001 h, and two solutions for the spin axis ecliptic coordinates: (A) lambda_1=57 +/- 10, beta_1=29 +/- 10, and (B) lambda_2=67 +/- 10, beta_2=-40 +/- 10. The magnitude-phase curve can be fitted with a standard H, G function with H=24.8 +/- 0.5 mag and an assumed G=0.24. The asteroid colour indices are g-i=0.79 +/- 0.01 mag, and i-z=0.01 +/- 0.02 mag which indicates an S taxonomic class, with an average geometric albedo p_V=0.23 +/- 0.02. The asteroid effective diameter, derived from H and p_V, is D=30 +/- 10 m. It was found that the inclination of the spin axis of 2021 DW1 is not perpendicular to the orbital plane (obliquity epsilon=54 +/- 10 or epsilon=123 +/- 10). More spin axes of VSAs should be determined to check, if 2021 DW1 is an exception or a typical case., Comment: 9 pages, 9 figures, submitted to A&A (version after revision)

Results from the TESS mission showed that previous studies strngly underestimated the number of slow rotators, revealing the importance of studying those asteroids. For most slowly rotating asteroids (P > 12), no spin and shape model is available because of observation selection effects. This hampers determination of their thermal parameters and accurate sizes. We continue our campaign in minimising selection effects among main belt asteroids. Our targets are slow rotators with low light-curve amplitudes. The goal is to provide their scaled spin and shape models together with thermal inertia, albedo, and surface roughness to complete the statistics. Rich multi-apparition datasets of dense light curves are supplemented with data from Kepler and TESS. In addition to data in the visible range, we also use thermal data from infrared space observatories (IRAS, Akari and WISE) in a combined optimisation process using the Convex Inversion Thermophysical Model (CITPM). This novel method has so far been applied to only a few targets, and in this work we further validate the method. We present the models of 16 slow rotators. All provide good fits to both thermal and visible data. The obtained sizes are on average accurate at the 5% precision, with diameters in the range from 25 to 145 km. The rotation periods of our targets range from 11 to 59 hours, and the thermal inertia covers a wide range of values, from 2 to <400 SI units, not showing any correlation with the period. With this work we increase the sample of slow rotators with reliable spin and shape models and known thermal inertia by 40%. The thermal inertia values of our sample do not display a previously suggested increasing trend with rotation period, which might be due to their small skin depth., Comment: Accepted to Astronomy & Astrophysics. 10 pages + appendices

Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of Kleopatra with high accuracy, hence its density. Methods. We combined our new VLT/SPHERE observations of Kleopatra recorded in 2017 and 2018 with archival data, as well as lightcurve, occultation, and delay-Doppler images, to derive its 3D shape model using two different algorithms (ADAM, MPCD). Furthermore, an N-body dynamical model allowed us to retrieve the orbital elements of the two moons as explained in the accompanying paper. Results. The shape of Kleopatra is very close to an equilibrium dumbbell figure with two lobes and a thick neck. Its volume equivalent diameter (118.75$\pm$1.40) km and mass (2.97$\pm$0.32) 10$^{18}$ kg imply a bulk density of (3.38$\pm$0.50) g cm$^{-3}$. Such a low density for a supposedly metal-rich body indicates a substantial porosity within the primary. This porous structure along with its near-equilibrium shape is compatible with a formation scenario including a giant impact followed by reaccumulation. Kleopatra's current rotation period and dumbbell shape imply that it is in a critically rotating state. The low effective gravity along the equator of the body, together with the equatorial orbits of the moons and possibly rubble-pile structure, opens the possibility that the moons formed via mass shedding. Conclusions. Kleopatra is a puzzling multiple system due to the unique characteristics of the primary. It deserves particular attention in the future, with the Extremely Large Telescopes and possibly a dedicated space mission., Comment: Accepted for publication in Astronomy and Astrophysics

To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the gravitational field up to the order $\ell = 10$. Its convergence was verified against the `brute-force' algorithm. We computed the coefficients $C_{\ell m},S_{\!\ell m}$ for Kleopatra's shape, assuming a~constant bulk density. For solar-system applications, it was also necessary to implement a variable distance and geometry of observations. Our $\chi^2$ metric then accounts for the absolute astrometry, the relative astrometry (2nd moon with respect to 1st), angular velocities, and also silhouettes, constraining the pole orientation. This allowed us to derive the orbital elements of Kleopatra's two moons. Using both archival astrometric data and new VLT/SPHERE observations (ESO LP 199.C-0074), we were able to identify the true periods of the moons, $P_1 = (1.822359\pm0.004156)\,{\rm d}$, $P_2 = (2.745820\pm0.004820)\,{\rm d}$. They orbit very close to the 3:2 mean-motion resonance, but their osculating eccentricities are too small compared to other perturbations (multipole, mutual), so that regular librations of the critical argument are not present. The resulting mass of Kleopatra, $m_1 = (1.49\pm0.16)\cdot10^{-12}\,M_\odot$ or $2.97\cdot10^{18}\,{\rm kg}$, is significantly lower than previously thought. An implication explained in the accompanying paper (Marchis et al.) is that (216) Kleopatra is a critically rotating body., Comment: accepted in A&A

Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D shape, and to study the dynamics of its two satellites. We also model Sylvia's thermal evolution. The shape of Sylvia appears flattened and elongated. We derive a volume-equivalent diameter of 271 +/- 5 km, and a low density of 1378 +/- 45 kg.m-3. The two satellites orbit Sylvia on circular, equatorial orbits. The oblateness of Sylvia should imply a detectable nodal precession which contrasts with the fully-Keplerian dynamics of the satellites. This reveals an inhomogeneous internal structure, suggesting that Sylvia is differentiated. Sylvia's low density and differentiated interior can be explained by partial melting and mass redistribution through water percolation. The outer shell would be composed of material similar to interplanetary dust particles (IDPs) and the core similar to aqueously altered IDPs or carbonaceous chondrite meteorites such as the Tagish Lake meteorite. Numerical simulations of the thermal evolution of Sylvia show that for a body of such size, partial melting was unavoidable due to the decay of long-lived radionuclides. In addition, we show that bodies as small as 130-150 km in diameter should have followed a similar thermal evolution, while smaller objects, such as comets and the KBO Arrokoth, must have remained pristine, in agreement with in situ observations of these bodies. NASA Lucy mission target (617) Patroclus (diameter~140 km) may, however, be differentiated., Comment: Accepted for publication in A&A

Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation., Comment: 12 pages, 6 figures, accepted to be published in A&A

Among the four known transneptunian dwarf planets, Haumea is an exotic, very elongated, and fast rotating body. In contrast to the other dwarf planets, its size, shape, albedo, and density are not well constrained. Here we report results of a multi-chord stellar occultation, observed on 2017 January 21. Secondary events observed around the main body are consistent with the presence of a ring of opacity 0.5, width 70 km, and radius 2,287$_{-45}^{+75}$ km. The Centaur Chariklo was the first body other than a giant planet to show a ring system and the Centaur Chiron was later found to possess something similar to Chariklo's rings. Haumea is the first body outside the Centaur population with a ring. The ring is coplanar with both Haumea's equator and the orbit of its satellite Hi'iaka. Its radius places close to the 3:1 mean motion resonance with Haumea's spin period. The occultation by the main body provides an instantaneous elliptical limb with axes 1,704 $\pm$ 4 km x 1,138 $\pm$ 26 km. Combined with rotational light-curves, it constrains Haumea's 3D orientation and its triaxial shape, which is inconsistent with a homogeneous body in hydrostatic equilibrium. Haumea's largest axis is at least 2,322 $\pm$ 60 km, larger than thought before. This implies an upper limit of 1,885 $\pm$ 80 kg m$^{-3}$ for Haumea's density, smaller and less puzzling than previous estimations, and a geometric albedo of 0.51 $\pm$ 0.02, also smaller than previous estimations. No global N$_2$ or CH$_4$ atmosphere with pressures larger than 15 and 50 nbar (3-$\sigma$ limits), respectively, is detected.

Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies., Comment: Accepted for publication in A&A

With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ($D$ $\lesssim$ 200 km) bodies. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling (ADAM) algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Interamnia's volume-equivalent diameter of 332 $\pm$ 6 km implies a bulk density of $\rho$=1.98 $\pm$ 0.68 gcm$^{-3}$ , which suggests that Interamnia - like Ceres and Hygiea - contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 $\sigma$ level. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ($D$ $\lesssim$ 300km) less massive ($m$ $\lesssim$ 3x10$^{19}$ kg) bodies., Comment: Accepted for publication in Astronomy and Astrophysics

We present a new non-convex model of the binary asteroid (809) Lundia. A SAGE (Shaping Asteroids with Genetic Evolution) method using disc-integrated photometry only was used for deriving physical parameters of this binary system. The model of (809) Lundia improves former system's pole solution and gives the ecliptic coordinates of the orbit pole - $\lambda=122^{\circ}$, $\beta=22^{\circ}$, $\sigma=\pm5^{\circ}$ - and the orbital period of $15.41574 \pm 0.00001$ h. For scaling our results we used effective diameter of $D_{eff} = 9.6 \pm 1.1$ km obtained from Spitzer observations. The non-convex shape description of the components permitted a refined calculation of the components' volumes, leading to a density estimation of $2.5\pm0.2$ g/cm$^3$ and macroporosity of 13-23\%. The intermediate-scale features of the model may also offer new clues on the components' origin and evolution.

Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM). Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotation period. Methods. To decrease the bias against slow rotators, we conducted a photometric observing campaign of main-belt asteroids with periods longer than 12 hours, from multiple stations worldwide, adding in some cases data from WISE and Kepler space telescopes. For spin and shape reconstruction we used the lightcurve inversion method, and to derive thermal inertias we applied a thermophysical model to fit available infrared data from IRAS, AKARI, and WISE. Results. We present new models of 11 slow rotators that provide a good fit to the thermal data. In two cases, the TPM analysis showed a clear preference for one of the two possible mirror solutions. We derived the diameters and albedos of our targets in addition to their thermal inertias, which ranged between 3$^{+33}_{-3}$ and 45$^{+60}_{-30}$ Jm$^{-2}$s$^{-1/2}$K$^{-1}$. Conclusions. Together with our previous work, we have analysed 16 slow rotators from our dense survey with sizes between 30 and 150 km. The current sample thermal inertias vary widely, which does not confirm the earlier suggestion that slower rotators have higher thermal inertias., Comment: Accepted for publication in Astronomy & Astrophysics

Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{{\rm eq}}$=214$\pm$5 km, and bulk density $\rho$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities., Comment: Accepted for publication in Astronomy and Astrophysics

Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale. Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark. Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information. Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces. Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.

Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 {\sigma}). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.

Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16) Psyche to set further constraints on its bulk composition and determine its potential meteoritic analog. We observed (16) Psyche with ESO VLT/SPHERE/ZIMPOL as part of our large program (ID 199.C-0074). We used the high angular resolution of these observations to refine Psyche's three-dimensional (3D) shape model and subsequently its density when combined with the most recent mass estimates. In addition, we searched for potential companions around the asteroid. We derived a bulk density of 3.99\,$\pm$\,0.26\,g$\cdot$cm$^{-3}$ for Psyche. While such density is incompatible at the 3-sigma level with any iron meteorites ($\sim$7.8\,g$\cdot$cm$^{-3}$), it appears fully consistent with that of stony-iron meteorites such as mesosiderites (density $\sim$4.25\,$\cdot$cm$^{-3}$). In addition, we found no satellite in our images and set an upper limit on the diameter of any non-detected satellite of 1460\,$\pm$\,200}\,m at 150\,km from Psyche (0.2\%\,$\times$\,R$_{Hill}$, the Hill radius) and 800\,$\pm$\,200\,m at 2,000\,km (3\%\,$\times$\,$R_{Hill}$). Considering that the visible and near-infrared spectral properties of mesosiderites are similar to those of Psyche, there is merit to a long-published initial hypothesis that Psyche could be a plausible candidate parent body for mesosiderites., Comment: 16 pages

We highlight the power of the Gaia DR2 in studying many fine structures of the Hertzsprung-Russell diagram (HRD). Gaia allows us to present many different HRDs, depending in particular on stellar population selections. We do not aim here for completeness in terms of types of stars or stellar evolutionary aspects. Instead, we have chosen several illustrative examples. We describe some of the selections that can be made in Gaia DR2 to highlight the main structures of the Gaia HRDs. We select both field and cluster (open and globular) stars, compare the observations with previous classifications and with stellar evolutionary tracks, and we present variations of the Gaia HRD with age, metallicity, and kinematics. Late stages of stellar evolution such as hot subdwarfs, post-AGB stars, planetary nebulae, and white dwarfs are also analysed, as well as low-mass brown dwarf objects. The Gaia HRDs are unprecedented in both precision and coverage of the various Milky Way stellar populations and stellar evolutionary phases. Many fine structures of the HRDs are presented. The clear split of the white dwarf sequence into hydrogen and helium white dwarfs is presented for the first time in an HRD. The relation between kinematics and the HRD is nicely illustrated. Two different populations in a classical kinematic selection of the halo are unambiguously identified in the HRD. Membership and mean parameters for a selected list of open clusters are provided. They allow drawing very detailed cluster sequences, highlighting fine structures, and providing extremely precise empirical isochrones that will lead to more insight in stellar physics. Gaia DR2 demonstrates the potential of combining precise astrometry and photometry for large samples for studies in stellar evolution and stellar population and opens an entire new area for HRD-based studies., Comment: Published in the A&A Gaia Data Release 2 special issue. Tables 2 and A.4 corrected. Tables available at http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/616/A10

Physical studies of asteroids depend on an availability of lightcurve data. Targets that are easy to observe and analyse naturally have more data available, so their synodic periods are confirmed from multiple sources. Also, thanks to availability of data from a number of apparitions, their spin and shape models can often be obtained. Almost half of bright (H<=11 mag) main-belt asteroid population with known lightcurve parameters have rotation periods considered long (P>12 hours) and are rarely chosen for photometric observations. There is a similar selection effect against asteroids with low lightcurve amplitudes (a_max<=0.25 mag). As a result such targets, though numerous in this brightness range, are underrepresented in the sample of spin and shape modelled asteroids. In the range of fainter targets such effects are stronger. These selection effects can influence what is now known about asteroid spin vs. size distribution, on asteroid internal structure and densities and on spatial orientation of asteroid spin axes. To reduce both biases at the same time, we started a photometric survey of a substantial sample of those bright main-belt asteroids that displayed both features: periods longer than 12 hours, and amplitudes that did not exceed 0.25 magnitude. First we aim at finding synodic periods of rotation, and after a few observed apparitions, obtaining spin and shape models. As an initial result of our survey we found that a quarter of the studied sample (8 out of 34 targets) have rotation periods different from those widely accepted. We publish here these newly found period values with the lightcurves. The size/frequency plot might in reality look different in the long-period range. Further studies of asteroid spins, shapes, and structure should take into account serious biases that are present in the parameters available today., Comment: Published in Planetary and Space Science. 13 pages, 20 figures

The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too. To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large and varied, we performed spin and shape modelling with two different methods. We used the convex inversion method and the non-convex SAGE algorithm, applied on the same datasets of dense lightcurves. Unlike convex inversion, the SAGE method allows for the existence of valleys and indentations on the shapes based only on lightcurves. We obtained detailed spin and shape models for the first five targets of our sample: (159) Aemilia, (227) Philosophia, (329) Svea, (478) Tergeste, and (487) Venetia. When compared to stellar occultation chords, our models obtained an absolute size scale and major topographic features of the shape models were also confirmed. When applied to thermophysical modelling, they provided a very good fit to the infrared data and allowed their size, albedo, and thermal inertia to be determined. Convex and non-convex shape models provide comparable fits to lightcurves. However, some non-convex models fit notably better to stellar occultation chords and to infrared data in sophisticated thermophysical modelling (TPM). In some cases TPM showed strong preference for one of the spin and shape solutions. Also, we confirmed that slowly rotating asteroids tend to have higher-than-average values of thermal inertia., Comment: Accepted in astronomy astrophys. 39 pages, 49 figures

The combination of visible and thermal data from the ground and astrophysics space missions is key to improving the scientific understanding of near-Earth, main-belt, trojans, centaurs, and trans-Neptunian objects. To get full information on a small sample of selected bodies we combine different methods and techniques: lightcurve inversion, stellar occultations, thermophysical modeling, radiometric methods, radar ranging and adaptive optics imaging. The SBNAF project will derive size, spin and shape, thermal inertia, surface roughness, and in some cases bulk densities and even internal structure and composition, for objects out to the most distant regions in the Solar System. The applications to objects with ground-truth information allows us to advance the techniques beyond the current state-of-the-art and to assess the limitations of each method. We present results from our project's first phase: the analysis of combined Herschel-KeplerK2 data and Herschel-occultation data for TNOs; synergy studies on large MBAs from combined high-quality visual and thermal data; establishment of well-known asteroids as celestial calibrators for far-infrared, sub-millimetre, and millimetre projects; first results on near-Earth asteroids properties from combined lightcurve, radar and thermal measurements, as well as the Hayabusa-2 mission target characterisation. We also introduce public web-services and tools for studies of small bodies in general., Comment: Accepted for publication in Advances in Space Research, 43 pages, 5 figures

Context. The so-called Barbarian asteroids share peculiar, but common polarimetric properties, probably related to both their shape and composition. They are named after (234) Barbara, the first on which such properties were identified. As has been suggested, large scale topographic features could play a role in the polarimetric response, if the shapes of Barbarians are particularly irregular and present a variety of scattering/incidence angles. This idea is supported by the shape of (234) Barbara, that appears to be deeply excavated by wide concave areas revealed by photometry and stellar occultations. Aims. With these motivations, we started an observation campaign to characterise the shape and rotation properties of Small Main- Belt Asteroid Spectroscopic Survey (SMASS) type L and Ld asteroids. As many of them show long rotation periods, we activated a worldwide network of observers to obtain a dense temporal coverage. Methods. We used light-curve inversion technique in order to determine the sidereal rotation periods of 15 asteroids and the con- vergence to a stable shape and pole coordinates for 8 of them. By using available data from occultations, we are able to scale some shapes to an absolute size. We also study the rotation periods of our sample looking for confirmation of the suspected abundance of asteroids with long rotation periods. Results. Our results show that the shape models of our sample do not seem to have peculiar properties with respect to asteroids with similar size, while an excess of slow rotators is most probably confirmed.

Despite the large amount of high quality data generated in recent space encounters with asteroids, the majority of our knowledge about these objects comes from ground based observations. Asteroids travelling in orbits that are potentially hazardous for the Earth form an especially interesting group to be studied. In order to predict their orbital evolution, it is necessary to investigate their physical properties. This paper briefly describes the data requirements and different techniques used to solve the lightcurve inversion problem. Although photometry is the most abundant type of observational data, models of asteroids can be obtained using various data types and techniques. We describe the potential of radar imaging and stellar occultation timings to be combined with disk-integrated photometry in order to reveal information about physical properties of asteroids., Comment: From Assessment and Mitigation of Asteroid Impact Hazards book

The near-Earth asteroid (NEA) 2015 TB145 had a very close encounter with Earth at 1.3 lunar distances on October 31, 2015. We obtained 3-band mid-infrared observations with the ESO VLT-VISIR instrument and visual lightcurves during the close-encounter phase. The NEA has a (most likely) rotation period of 2.939 +/- 0.005 hours and the visual lightcurve shows a peak-to-peak amplitude of approximately 0.12+/-0.02 mag. We estimate a V-R colour of 0.56+/-0.05 mag from MPC database entries. Applying different phase relations to the available R-/V-band observations produced H_R = 18.6 mag (standard H-G calculations) or H_R = 19.2 mag & H_V = 19.8 mag (via the H-G12 procedure), with large uncertainties of approximately 1 mag. We performed a detailed thermophysical model analysis by using spherical and ellipsoidal shape models. The thermal properties are best explained by an equator-on (+/- ~30 deg) viewing geometry during our measurements with a thermal inertia in the range 250-700 Jm-2s-0.5K-1 (retrograde rotation) or above 500 Jm-2s-0.5K-1 (prograde rotation). We find that the NEA has a minimum size of 625 m, a maximum size of just below 700 m, and a slightly elongated shape with a/b ~1.1. The best match to all thermal measurements is found for: (i) Thermal inertia of 900 Jm-2s-0.5K-1; D_eff = 644 m, p_V = 5.5% (prograde rotation); regolith grain sizes of ~50-100 mm; (ii) thermal inertia of 400 Jm-2s-0.5K-1; D_eff = 667 m, p_V = 5.1% (retrograde rotation); regolith grain sizes of ~10-20 mm. A near-Earth asteroid model (NEATM) confirms an object size well above 600 m, significantly larger than early estimates based on radar measurements. We give recommendations for improved observing strategies for similar events in the future., Comment: Accepted for publication in Astronomy & Astrophysics, 11 pages, 9 figures

Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further studies such as analysis of asteroid physical properties in different populations, including smaller collisional families, thermophysical modeling, and scaling shape models by disk-resolved images, or stellar occultation data. This provides, in combination with known masses, bulk density estimates, but constrains also theoretical collisional and evolutional models of the Solar System. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as an input for the convex inversion method, and derive 3D shape models of asteroids, together with their rotation periods and orientations of rotation axes. The key ingredient is the support of more that one hundred observers who submit their optical data to publicly available databases. We present updated shape models for 36 asteroids, for which mass estimates are currently available in the literature or their masses will be most likely determined from their gravitational influence on smaller bodies, which orbital deflection will be observed by the ESA Gaia astrometric mission. This was achieved by using additional optical data from recent apparitions for the shape optimization. Moreover, we also present new shape model determinations for 250 asteroids, including 13 Hungarias and 3 near-Earth asteroids., Comment: Accepted for publication in A&A

We present the Gaia-Groundbased Observational Service for Asteroids (GOSA). Gaia-GOSA is an interactive tool which supports observers in planning photometric observations of asteroids. Each user is able to personalise the observation plan taking into account the equipment used and the observation site. The list of targets has been previously selected among the most relevant and scientifically remarkable objects, while the prediction of the transits in the Gaia's field of view have been calculated at the Observatoire de la C\^ote d'Azur. The data collected by the GOSA community will be exploited to enhance the reliability of the Gaia's Solar system science. The service is publicly available at www.gaiagosa.eu., Comment: Vol. 10, EPSC2015-131, 2015 European Planetary Science Congress 2015

We investigated the reliability of the genetic algorithm which will be used to invert the photometric measurements of asteroids collected by the European Space Agency Gaia mission. To do that, we performed several sets of simulations for 10 000 asteroids having different spin axis orientations, rotational periods and shapes. The observational epochs used for each simulation were extracted from the Gaia mission simulator developed at the Observatoire de la C\^{o}te d'Azur, while the brightness was generated using a Z-buffer standard graphic method. We also explored the influence on the inversion results of contaminating the data set with Gaussian noise with different $\sigma$ values. The research enabled us to determine a correlation between the reliability of the inversion method and the asteroid's pole latitude. In particular, the results are biased for asteroids having quasi-spherical shapes and low pole latitudes. This effect is caused by the low lightcurve amplitude observed under such circumstances, as the periodic signal can be lost in the photometric random noise when both values are comparable, causing the inversion to fail. Such bias might be taken into account when analysing the inversion results, not to mislead it with physical effects such as non-gravitational forces. Finally, we studied what impact on the inversion results has combining a full lightcurve and Gaia photometry collected simultaneously. Using this procedure we have shown that it is possible to reduce the number of wrong solutions for asteroids having less than 50 data points. The latter will be of special importance for planning ground-based observations of asteroids aiming to enhance the scientific impact of Gaia on Solar system science., Comment: Accepted in MNRAS

We present a new non-convex model of the 90 Antiope binary asteroid, derived with a modified version of the SAGE (Shaping Asteroids with Genetic Evolution) method using disk-integrated photometry only. A new variant of the SAGE algorithm capable of deriving models of binary systems is described. The model of 90 Antiope confirms the system's pole solution ($\lambda=199^{\circ}$, $\beta=38^{\circ}$, $\sigma=\pm5^{\circ}$) and the orbital period ($16.505046 \pm 0.000005$ h). A comparison between the stellar occultation chords obtained during the 2011 occultation and the projected shape solution has been used to scale the model. The resulting scaled model allowed us to obtain the equivalent radii ($R_{1}=40.4\pm0.9$ km and $R_{2}=40.2\pm0.9$ km) and the distance between the two system components ($176\pm4$ km), leading to a total system mass of ($9.14\pm0.62$)$\cdot10^{17}$ kg. The non-convex shape description of the components permitted a refined calculation of the components' volumes, leading to a density estimation of $1.67\pm0.23$ g cm$^{-3}$. The intermediate-scale features of the model may also offer new clues on the components' origin and evolution.

The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can also be used in combination with other types of observational data (IR, adaptive optics images, stellar occultations), e.g., to determine sizes and thermal properties. We use all available photometric data of asteroids to derive their physical models by the lightcurve inversion method and compare the observed pole latitude distributions of all asteroids with known convex shape models with the simulated pole latitude distributions. We used classical dense photometric lightcurves from several sources and sparse-in-time photometry from the U.S. Naval Observatory in Flagstaff, Catalina Sky Survey, and La Palma surveys (IAU codes 689, 703, 950) in the lightcurve inversion method to determine asteroid convex models and their rotational states. We also extended a simple dynamical model for the spin evolution of asteroids used in our previous paper. We present 119 new asteroid models derived from combined dense and sparse-in-time photometry. We discuss the reliability of asteroid shape models derived only from Catalina Sky Survey data (IAU code 703) and present 20 such models. By using different values for a scaling parameter cYORP (corresponds to the magnitude of the YORP momentum) in the dynamical model for the spin evolution and by comparing synthetics and observed pole-latitude distributions, we were able to constrain the typical values of the cYORP parameter as between 0.05 and 0.6., Comment: Accepted for publication in A&A, January 15, 2013