Search

Abstract The increasing demand for sustainable agricultural practices necessitates innovative solutions for soil fertilization. This study aimed to assess the viability of using limestone mining co-products from the Irati and Corumbataí Formations as multi-nutrient sources for Glycine max cultivation. The experiment utilized a double factorial design (7 × 2) with five replications, randomly arranged and placed in pots within a greenhouse. The factors examined were the type of co-product (sedimentary rocks from the Irati Formation: rhythmite and bituminous shale; and the Corumbataí Formation: clayey siltstone) and the soil type (Haplic Arenosol and Rhodic Ferralsol). Soil ion content was assessed at 21 and 140 days after treatment application. Each pot housed four G. max plants, with leaf harvest occurring after 42 days of growth. Macronutrient content, leaf production, and soil ion availability were determined thereafter. Overall, co-product application led to increased soil pH and availability of essential ions, including K+, Mg2+, Ca2+, P, S-SO4 2−, and Si. At 140 days, rhythmite was notably effective in increasing pH, Ca2+, and Mg2+ in Haplic Arenosol, with respective increases of 22%, 224%, and 696%. Bituminous shale, on the other hand, significantly increased S-SO4 2− content by 67% and 426% in Rhodic Ferralsol and Haplic Arenosol, respectively. Moreover, the application of co-products resulted in enhanced accumulation of K, Ca, Mg, and S in G. max plants, alongside increased leaf production. In conclusion, the utilization of mining co-products positively influenced soil and plant chemical attributes, particularly enhancing leaf production in G. max. These findings highlight the potential of co-products as environmentally friendly solutions for soil fertilization, supporting sustainable agricultural practices. This research highlights a significant step towards sustainable agriculture by recycling mining waste into valuable soil amendments, which can improve crop yields and reduce the environmental impact of both mining and agricultural activities. Graphical Abstract

Understanding photosynthetic mechanisms in different plant species is crucial for advancing agricultural productivity and ecological restoration. This study presents a detailed physiological and ultrastructural comparison of photosynthetic mechanisms between Hibiscus (Hibiscus rosa-sinensis L.) and Pelargonium (Pelargonium zonale (L.) L’Hér. Ex Aiton) plants. The data collection encompassed daily photosynthetic profiles, responses to light and CO2, leaf optical properties, fluorescence data (OJIP transients), biochemical analyses, and anatomical observations. The findings reveal distinct morphological, optical, and biochemical adaptations between the two species. These adaptations were associated with differences in photochemical (AMAX, E, Ci, iWUE, and α) and carboxylative parameters (VCMAX, ΓCO2, gs, gm, Cc, and AJMAX), along with variations in fluorescence and concentrations of chlorophylls and carotenoids. Such factors modulate the efficiency of photosynthesis. Energy dissipation mechanisms, including thermal and fluorescence pathways (ΦPSII, ETR, NPQ), and JIP test-derived metrics highlighted differences in electron transport, particularly between PSII and PSI. At the ultrastructural level, Hibiscus exhibited optimised cellular and chloroplast architecture, characterised by increased chloroplast density and robust grana structures. In contrast, Pelargonium displayed suboptimal photosynthetic parameters, possibly due to reduced thylakoid counts and a higher proportion of mitochondria. In conclusion, while Hibiscus appears primed for efficient photosynthesis and energy storage, Pelargonium may prioritise alternative cellular functions, engaging in a metabolic trade-off.

The application of non-imaging hyperspectral sensors has significantly enhanced the study of leaf optical properties across different plant species. In this study, chlorophyll fluorescence (ChlF) and hyperspectral non-imaging sensors using ultraviolet-visible-near-infrared shortwave infrared (UV-VIS-NIR-SWIR) bands were used to evaluate leaf biophysical parameters. For analyses, principal component analysis (PCA) and partial least squares regression (PLSR) were used to predict eight structural and ultrastructural (biophysical) traits in green and purple Tradescantia leaves. The main results demonstrate that specific hyperspectral vegetation indices (HVIs) markedly improve the precision of partial least squares regression (PLSR) models, enabling reliable and nondestructive evaluations of plant biophysical attributes. PCA revealed unique spectral signatures, with the first principal component accounting for more than 90% of the variation in sensor data. High predictive accuracy was achieved for variables such as the thickness of the adaxial and abaxial hypodermis layers (R2 = 0.94) and total leaf thickness, although challenges remain in predicting parameters such as the thickness of the parenchyma and granum layers within the thylakoid membrane. The effectiveness of integrating ChlF and hyperspectral technologies, along with spectroradiometers and fluorescence sensors, in advancing plant physiological research and improving optical spectroscopy for environmental monitoring and assessment. These methods offer a good strategy for promoting sustainability in future agricultural practices across a broad range of plant species, supporting cell biology and material analyses.

Modeling spectral reflectance data using machine learning algorithms presents a promising approach for estimating soil attributes. Nevertheless, a comprehensive investigation of the most effective models, parameters, wavelengths, and data acquisition techniques is essential to ensure optimal predictive accuracy. This work aimed to (a) explore the potential of the soil spectral signature obtained in different spectral bands (VIS-NIR, SWIR, and VIS-NIR-SWIR) and, by using hyperspectral imaging and non-imaging sensors, in the predictive modeling of soil attributes; and (b) analyze the accuracy of different ML models in predicting particle size and soil organic carbon (SOC) applied to the spectral signature of different spectral bands. Six soil monoliths, located in the central north region of Parana, Brazil, were collected and scanned via hyperspectral cameras (VIS-NIR camera and SWIR camera) and spectroradiometer (VIS-NIR-SWIR) in the laboratory. The spectral signature of the soils was analyzed and subsequently applied to ML models to predict particle size and SOC. Each set of data obtained by the different sensors was evaluated separately. The algorithms used were k-nearest neighbors (KNN), support vector machine (SVM), random forest (RF), linear regression (LR), artificial neural network (NN), and partial least square regression (PLSR). The most promising predictive performance was observed for the complete VIS-NIR-SWIR spectrum, followed by SWIR and VIS-NIR. Meanwhile, KNN, RF, and NN models were the most promising algorithms in estimating soil attributes for the dataset obtained from both sensors. The general mean R2 (determination coefficient) values obtained using these models, considering the different spectral bands evaluated, were around 0.99, 0.98, and 0.97 for sand prediction, and around 0.99, 0.98, and 0.96 for clay prediction. The lower performances, obtained for the datasets from both sensors, were observed for silt and SOC, with R2 results between 0.40 and 0.59 for these models. KNN demonstrated the best predictive performance. Integrating effective ML models with robust sample databases, obtained by advanced hyperspectral imaging and spectroradiometers, can enhance the accuracy and efficiency of soil attribute prediction.

The differential effects of cellular and ultrastructural characteristics on the optical properties of adaxial and abaxial leaf surfaces in the genus Tradescantia highlight the intricate relationships between cellular arrangement and pigment distribution in the plant cells. We examined hyperspectral and chlorophyll a fluorescence (ChlF) kinetics using spectroradiometers and optical and electron microscopy techniques. The leaves were analysed for their spectral properties and cellular makeup. The biochemical compounds were measured and correlated with the biophysical and ultrastructural features. The main findings showed that the top and bottom leaf surfaces had different amounts and patterns of pigments, especially anthocyanins, flavonoids, total phenolics, chlorophyll-carotenoids, and cell and organelle structures, as revealed by the hyperspectral vegetation index (HVI). These differences were further elucidated by the correlation coefficients, which influence the optical signatures of the leaves. Additionally, ChlF kinetics varied between leaf surfaces, correlating with VIS-NIR-SWIR bands through distinct cellular structures and pigment concentrations in the hypodermis cells. We confirmed that the unique optical properties of each leaf surface arise not only from pigmentation but also from complex cellular arrangements and structural adaptations. Some of the factors that affect how leaves reflect light are the arrangement of chloroplasts, thylakoid membranes, vacuoles, and the relative size of the cells themselves. These findings improve our knowledge of the biophysical and biochemical reasons for leaf optical diversity, and indicate possible implications for photosynthetic efficiency and stress adaptation under different environmental conditions in the mesophyll cells of Tradescantia plants.

An integrated approach that utilises hyperspectral and chlorophyll a fluorescence sensors to predict biochemical and biophysical parameters represents a new generation of remote-sensing research. The main objective of this study was to obtain a detailed spectral profile that correlates with plant physiology, thereby enhancing our understanding and management of plant health, pigment profiles, and compound fingerprints. Leveraging datasets using non-imaging or passive hyperspectral and chlorophyll fluorescence sensors to collect data in Tradescantia species demonstrated significant differences in leaf characteristics with pigment concentrations and structural components. The main goal was to use principal component analysis (PCA) and partial least squares regression (PLS) methods to analyse the variations in their spectra. Our findings demonstrate a strong correlation between hyperspectral data and chlorophyll fluorescence, which is further supported by the development of hyperspectral vegetation indices (HVIs) that can accurately evaluate fingerprints and predict many compounds in variegated leaves. The higher the integrated analytical approach and its potential application in HVIs and fingerprints, the better the selection of wavelengths and sensor positions for rapid and accurate analysis of many different compounds in leaves. Nonetheless, limitations arose from the specificity of the data for the Tradescantia species, warranting further research across diverse plant types and compounds in the leaves. Overall, this study paves the way for more sustainable and informed agricultural practices through breakthroughs in the application of sensors to remote-sensing technologies.

Heat stress is an abiotic factor that affects the photosynthetic parameters of plants. In this study, we examined the photosynthetic mechanisms underlying the rapid response of tobacco plants to heat stress in a controlled environment. To evaluate transient heat stress conditions, changes in photochemical, carboxylative, and fluorescence efficiencies were measured using an infrared gas analyser (IRGA Licor 6800) coupled with chlorophyll a fluorescence measurements. Our findings indicated that significant disruptions in the photosynthetic machinery occurred at 45 °C for 6 h following transient heat treatment, as explained by 76.2% in the principal component analysis. The photosynthetic mechanism analysis revealed that the dark respiration rate (Rd and Rd*CO2) increased, indicating a reduced potential for carbon fixation during plant growth and development. When the light compensation point (LCP) increased as the light saturation point (LSP) decreased, this indicated potential damage to the photosystem membrane of the thylakoids. Other photosynthetic parameters, such as AMAX, VCMAX, JMAX, and ΦCO2, also decreased, compromising both photochemical and carboxylative efficiencies in the Calvin–Benson cycle. The energy dissipation mechanism, as indicated by the NPQ, qN, and thermal values, suggested that a photoprotective strategy may have been employed. However, the observed transitory damage was a result of disruption of the electron transport rate (ETR) between the PSII and PSI photosystems, which was initially caused by high temperatures. Our study highlights the impact of rapid temperature changes on plant physiology and the potential acclimatisation mechanisms under rapid heat stress. Future research should focus on exploring the adaptive mechanisms involved in distinguishing mutants to improve crop resilience against environmental stressors.

Photosynthesis is a key process in plant physiology. Understanding its mechanisms is crucial for optimizing crop yields and for environmental monitoring across a diverse range of plants. In this study, we employed reflectance, transmittance, and absorbance hyperspectral sensors and utilized multivariate statistical techniques to improve the predictive models for chlorophyll a fluorescence (ChlF) parameters in Hibiscus and Geranium model plants. Our objective was to identify spectral bands within hyperspectral data that correlate with ChlF indicators using high-resolution data spanning the electromagnetic spectrum from ultraviolet to shortwave infrared (UV–VIS–NIR–SWIR). Utilizing the hyperspectral vegetation indices (HVIs) tool to align importance projection for wavelength preselection and select the most responsive wavelength by variable importance projection (VIP), we optimized partial least squares regression (PLSR) models to enhance predictive accuracy. Our findings revealed a strong relationship between hyperspectral sensor data and ChlF parameters. Employing principal component analysis, kappa coefficients (k), and accuracy (Acc) evaluations, we achieved values exceeding 86% of the predicted ChlF parameters for both Hibiscus and Geranium plants. Regression models for parameters such as Ψ(EO), ϕ(PO), ϕ(EO), ϕ(DO), δRo, ρRo, Kn, Kp, SFI(abs), PI(abs), and D.F. demonstrated model accuracies close to 0.84 for R2 and approximately 1.96 for RPD. The spectral regions linked with these parameters included blue, green, red, infrared, SWIR1, and SWIR2, emphasizing their relevance for noninvasive evaluations. This research demonstrates the ability of hyperspectral sensors to noninvasively predict chlorophyll a fluorescence (ChlF) parameters, which are essential for assessing photosynthetic efficiency in plants. Notably, hyperspectral absorbance data were more accurate in predicting JIP-test-based chlorophyll a kinetic parameters. In conclusion, this study underscores the potential of hyperspectral sensors for deepening our understanding of plant photosynthesis and monitoring plant health.

In an effort to improve the efficiency of soil classification, traditional methods are being combined with analytical and computational techniques. This integration has strengthened the connection between conventional classification and the application of machine-learning (ML) models to interpret soil spectral reflectance data. Due to the time and computational cost, several studies are limited to testing the classification performance of a few algorithms and do not always explore the best parameters for model optimization. The study aims to assess the efficiency of combining soil spectral reflectance with prevalent ML models for classifying pedogenetic horizons and soil suborders, enhancing traditional classification methods. We collected seven soil monoliths, previously classified according to the Brazilian Soil Classification System (SiBCS) and soil taxonomy. Using the ASD Fieldspec spectroradiometer, we obtained spectral reflectance samples along each monolith (n = 800 per monolith) to classify horizons and n = 5600 for suborder classification. Spectral fingerprints were obtained and explored by Principal Component Analysis (PCA). The spectral data were subdivided into training (70%) and test (30%) sets and submitted to the Logistic Regression (LR), Artificial Neural Network (NN), Support Vector Machine (SVM), Random Forest (RF), and Gradient Boosting (GB) models for the classification of horizons and suborders, considering the model’s adjustment parameters. Accuracy and F-Score were used to verify the performance of the models. There was a significant influence of particle size and soil organic carbon on the spectral fingerprint of the soils. The PCA indicated that topsoil horizons clustered in most of the monoliths analyzed, while most of the subsoil horizons showed data overlap. The NN model showed the highest accuracy in the classification of horizons (97%), while the SVM showed the lowest performance (52% accuracy). The classification of soil suborders presented accuracies between 95% and 98%. Therefore, our study concludes that spectral data combined with ML models can enhance the discrimination and classification of soil horizons and suborders, improving upon traditional methods.

Reflectance hyperspectroscopy is recognised for its potential to elucidate biochemical changes, thereby enhancing the understanding of plant biochemistry. This study used the UV-VIS-NIR-SWIR spectral range to identify the different biochemical constituents in Hibiscus and Geranium plants. Hyperspectral vegetation indices (HVIs), principal component analysis (PCA), and correlation matrices provided in-depth insights into spectral differences. Through the application of advanced algorithms—such as PLS, VIP, iPLS-VIP, GA, RF, and CARS—the most responsive wavelengths were discerned. PLSR models consistently achieved R2 values above 0.75, presenting noteworthy predictions of 0.86 for DPPH and 0.89 for lignin. The red-edge and SWIR bands displayed strong associations with pivotal plant pigments and structural molecules, thus expanding the perspectives on leaf spectral dynamics. These findings highlight the efficacy of spectroscopy coupled with multivariate analysis in evaluating the management of biochemical compounds. A technique was introduced to measure the photosynthetic pigments and structural compounds via hyperspectroscopy across UV-VIS-NIR-SWIR, underpinned by rapid multivariate PLSR. Collectively, our results underscore the burgeoning potential of hyperspectroscopy in precision agriculture. This indicates a promising paradigm shift in plant phenotyping and biochemical evaluation.

Hyperspectral technology offers significant potential for non-invasive monitoring and prediction of morphological parameters in plants. In this study, UV−VIS−NIR−SWIR reflectance hyperspectral data were collected from Nicotiana tabacum L. plants using a spectroradiometer. These plants were grown under different light and gibberellic acid (GA3) concentrations. Through spectroscopy and multivariate analyses, key growth parameters, such as height, leaf area, energy yield, and biomass, were effectively evaluated based on the interaction of light with leaf structures. The shortwave infrared (SWIR) bands, specifically SWIR1 and SWIR2, showed the strongest correlations with these growth parameters. When classifying tobacco plants grown under different GA3 concentrations in greenhouses, artificial intelligence (AI) and machine learning (ML) algorithms were employed, achieving an average accuracy of over 99.1% using neural network (NN) and gradient boosting (GB) algorithms. Among the 34 tested vegetation indices, the photochemical reflectance index (PRI) demonstrated the strongest correlations with all evaluated plant phenotypes. Partial least squares regression (PLSR) models effectively predicted morphological attributes, with R2CV values ranging from 0.81 to 0.87 and RPDP values exceeding 2.09 for all parameters. Based on Pearson’s coefficient XYZ interpolations and HVI algorithms, the NIR−SWIR band combination proved the most effective for predicting height and leaf area, while VIS−NIR was optimal for optimal energy yield, and VIS−VIS was best for predicting biomass. To further corroborate these findings, the SWIR bands for certain morphological characteristic wavelengths selected with s−PLS were most significant for SWIR1 and SWIR2, while i−PLS showed a more uniform distribution in VIS−NIR−SWIR bands. Therefore, SWIR hyperspectral bands provide valuable insights into developing alternative bands for remote sensing measurements to estimate plant morphological parameters. These findings underscore the potential of remote sensing technology for rapid, accurate, and non-invasive monitoring within stationary high-throughput phenotyping systems in greenhouses. These insights align with advancements in digital and precision technology, indicating a promising future for research and innovation in this field.

Thousands of chemical analyses are carried out annually with the aim of recommending soil correction; however, these analyses are expensive, destructive, time-consuming, and can be harmful to the environment. As an alternative to conventional analysis methods, diffuse reflectance spectroscopy has been proposed as an option for evaluating the chemical characteristics of soil. The selection of variables has also emerged as an alternative to improve the performance of PLSR (partial least squares regression), as it decreases the root mean square error (RMSE) and increases the accuracy of the models. However, few studies have used a previous selection of variables for the construction of PLSR models to estimate the chemical characteristics of soil. In this context, the hypothesis in this study was that it is possible to calculate the liming recommendation in Oxisol based on the chemical characteristics estimated by PLSR, with a previous selection of variables using iPLS (Interval PLS). The objective was to calculate the need for liming based on chemical characteristics estimated via iPLS selection and PLSR modeling of specific wavelengths of soil reflectance. The experimental area was treated with different application rates of limestone, with and without incorporation, and phosphogypsum was applied in additional treatments. Soil assessments were carried out 5, 12, 24, and 36 months after the application of the treatments, using six layers: 0.00–0.05, 0.05–0.10, 0.10–0.20, 0.20–0.30, 0.30–0.40 and 0.40–0.60 m. Samples were subjected to conventional laboratory analyses, and spectral readings (400–2500 nm) were obtained with a spectroradiometer. The spectral curves were subjected to the iPLS variable selection method to generate PLSR models of the chemical characteristics used to calculate the liming recommendation. The chemical characteristics of the soil, such as Ca2+, sum of bases (SB), effective cation exchange capacity (CTCe), cation exchange capacity (CTC), and base saturation (BS), could be estimated, with values of R2 ranging from 0.83 to 0.92 in the calibration and validation steps, and from 0.84 to 0.90 for the prediction step (in the fourth assessment). The liming recommendation calculated based on the chemical characteristics predicted from the PLSR models showed a strong correlation (r > 0.86) with the liming recommendation calculated by conventional laboratory techniques. The fourth soil assessment yielded the best correlation coefficient (r = 0.95).

Diversos avanços têm sido conquistados no campo da espectrorradiometria difusa, nas últimas décadas. Na área agrícola, a busca por métodos de quantificação de atributos físicos e químicos do ambiente de produção, com base na reflectância do solo, tem sido pesquisada constantemente. O objetivo deste trabalho foi avaliar a possibilidade de estimar os teores de silte, areia, argila, soma de bases, matéria orgânica e ferro total em amostras de solo, a partir de sua energia refletida. As amostras foram coletadas em uma área de 2.500 ha, localizada na região noroeste paranaense, composta por solos das classes Latossolo Vermelho, Nitossolo Vermelho, Argissolo Vermelho, Cambissolo Háplico e Neossolo Quartzarênico. As profundidades de amostragem foram de 0-0,2 e 0,2-0,8 m. Os pontos amostrados foram escolhidos com base em um grid: de 500 x 500 m, que recobriu toda a área de trabalho, totalizando, dessa forma, 100 pontos para o horizonte superficial e 100 pontos para o subsuperficial. As leituras espectrais foram obtidas em laboratório pelo sensor FieldSpec 3 JR. na faixa de 350 a 2.500 nm. As curvas espectrais das amostras foram separadas em bandas e alturas, que se relacionaram com cada atributo por meio de regressão linear múltipla. A espectrorradiometria difusa evidenciou-se mais eficiente na estimação de areia, argila, soma de bases e ferro total e menos eficiente na estimação da matéria orgânica e do silte, em ambos os horizontes. Os resultados após a validação dos modelos indicam que a espectrorradiometria difusa é ferramenta promissora, que pode ser utilizada na determinação de atributos do solo.

The aim of this study was to develop and test a method to determine and discriminate soil classes in the state of São Paulo, Brazil, based on spectral data obtained via Landsat satellite imagery. Satellite reflectance images were extracted from 185 spectral reading points, and discriminant equations were obtained to establish each soil class within the studied area. Sixteen soil classes were analyzed, and discriminant equations that comprised TM5/Landsat sensor bands 1, 2, 3, 4, 5, and 7 were established. The results showed that this methodology could effectively identify individual soil classes using discriminant analyses of the spectral data obtained from the surface. Success rates of > 40% were achieved for 14 of the 16 evaluated soil classes when applying the satellite image data. When the 10 soil classes containing the largest number of minimum cartographic areas were used, the hit rate increased to > 50%, for seven soil classes with a global hit rate of 52%. When the soil classes were grouped based on their parent materials, the hit rate increased to 70%. Thus, we concluded that the spectral method for soil classification was efficient.O objetivo deste trabalho foi desenvolver e testar um método para a determinação da classe de solo e sua separabilidade na paisagem dos solos presentes em uma área de estudo localizada no estado de São Paulo. Um conjunto de equações discriminantes foi obtido utilizando-se o sistema SAS que permitiu estabelecer a classe de solo na área de estudo. Foram analisadas 16 classes de solos as quais foram estabelecidas equações discriminantes compostas pelas bandas 1, 2, 3, 4, 5, e 7 do sensor TM5/ Landsat. As leituras espectrais foram realizadas em 185 pontos da área de estudo, donde se extraiu a reflectância da imagem. Classes de solos podem ser individualizadas por meio de análise discriminante utilizando-se informações sobre seu comportamento espectral obtida pela metodologia apresentada. A análise discriminante apresentou índices de acerto acima de 40% dentro da classe de solo avaliada, para 14 das 16 classes de solos. Utilizando-se as dez classes com maior número de áreas mínimas cartografadas o acerto, dentro a classe, foi maior que 50% para sete classes de solos, com acerto global estabelecido em 52%. Quando se agrupou as classes de solos em função do seu material de origem, o acerto passou para 70%.

The importance of understanding spatial variability of soils is connected to crop management planning. This understanding makes it possible to treat soil not as a uniform, but a variable entity, and it enables site-specific management to increase production efficiency, which is the target of precision agriculture. Questions remain as the optimum soil sampling interval needed to make site-specific fertilizer recommendations in Brazil. The objectives of this study were: i) to evaluate the spatial variability of the main attributes that influence fertilization recommendations, using georeferenced soil samples arranged in grid patterns of different resolutions; ii) to compare the spatial maps generated with those obtained with the standard sampling of 1 sample ha-1, in order to verify the appropriateness of the spatial resolution. The attributes evaluated were phosphorus (P), potassium (K), organic matter (OM), base saturation (V%) and clay. Soil samples were collected in a 100 × 100 m georeferenced grid. Thinning was performed in order to create a grid with one sample every 2.07, 2.88, 3.75 and 7.20 ha. Geostatistical techniques, such as semivariogram and interpolation using kriging, were used to analyze the attributes at the different grid resolutions. This analysis was performed with the Vesper software package. The maps created by this method were compared using the kappa statistics. Additionally, correlation graphs were drawn by plotting the observed values against the estimated values using cross-validation. P, K and V%, a finer sampling resolution than the one using 1 sample ha-1 is required, while for OM and clay coarser resolutions of one sample every two and three hectares, respectively, may be acceptable.A importância de compreender a variabilidade espacial do solo está conectada ao planejamento do manejo das culturas. Este entendimento faz com que seja possível tratar o solo não como uma entidade uniforme, mas variável, e permite o gerenciamento de sítios específicos para aumentar a eficiência de produção, que é o objetivo da agricultura de precisão. Questões relacionadas com a otimização do intervalo de amostragem do solo se faz necessário para a realização das recomendações de adubações no Brasil. Os objetivos deste estudo foram: i) avaliar a variabilidade espacial dos principais atributos que influenciam as recomendações de adubação, usando amostras de solos georreferenciadas dispostas em padrões de grades de diferentes resoluções; ii) comparar os mapas espaciais gerados com o mapa padrão obtido com amostragem de 1 amostra ha-1, a fim de verificar a adequação da resolução espacial. Os atributos avaliados foram fósforo (P), potássio (K), matéria orgânica (MO), saturação por bases (V%) e argila. As amostras de solos foram coletadas numa grade de 100 × 100 m e georreferenciadas. Um desbaste foi realizado, criando-se uma grade com 1 amostra a cada 2,07, 2,88, 3,75 e 7,20 ha. Técnicas de geoestatística, como semivariograma e interpolação usando krigagem, foram utilizadas para analisar os atributos nas grades com diferentes resoluções. Esta análise foi realizada com o programa computacional Vesper. Os mapas criados por este método foram comparados utilizando-se a estatística kappa. Além disso, gráficos de correlação foram construídos plotando-se os valores observados pelos valores estimados utilizando-se a validação cruzada. Para P, K e V%, uma amostragem de resolução mais fina do que aquela usando 1 amostra ha-1 foi necessária, enquanto que para MO e argila, resoluções mais grosseiras de uma amostra ou dois em dois e três hectares, respectivamente, pode ser aceitável.

O objetivo deste trabalho foi integrar, em uma base de dados geoespacial, informações a respeito da distribuição dos solos na paisagem, bem como de seus atributos dentro de uma Reserva Particular do Patrimônio Natural (RPPN), situada no município de Lobato, Estado do Paraná. Todas as características de aspecto físico e morfológico obtidas foram incorporadas em um Sistema de Informações Geográficas (SIG). Diante dos dados das análises e do estudo de sua distribuição espacial, as unidades fisiográficas passaram a constituir unidades resultando na produção de mapas.The objective of this study was to integrate, into a geospatial database, information regarding the distribution of soils inthe landscape, as well as their attributes inside a Natural Heritage Private Reserve (RPNP) located in the city of Lobato. All physical and morphologic characteristics were incorporated into a Geographical Information System (GIS). Based on the analyzed data and the study oftheir spatial distribution, these physiographic units were eventually mapped.

Os levantamentos pedológicos são amplamente utilizados nos mapeamentos de solo por serem métodos confiáveis, no entanto, apesar de tal vantagem são demorados e trabalhosos. Dentro deste contexto, surge o sensoriamento remoto como uma técnica rápida e promissora capaz de auxiliar nos levantamentos, de forma a tornar o processo mais dinâmico. O objetivo deste trabalho foi avaliar a possibilidade de discriminação de cinco classes de solos localizadas no planalto de Apucarana por meio de suas respostas espectrais. Foi estabelecido um grid de 500 m x 500 m a partir do qual coletaram-se amostras de 0-0,2 m e de 0,8-1,0 m de profundidade. As reflectâncias foram obtidas com o FiedSpec 3 jr, na faixa de 350 a 2500 nm. Equações Discriminantes e simulações foram geradas a partir das respostas espectrais das amostras de solo. Das 88 variáveis avaliadas apenas 8 foram selecionadas pelo procedimento STEPDISC para fazerem parte dos modelos. As equações discriminantes geradas foram testadas, obtendo-se matrizes de confusão, as quais apresentaram acerto acima de 70% para cada classe de solo. Da mesma forma, equações discriminantes simuladas foram geradas, obtendo-se melhores resultados de reclassificação quando utilizados dados que fizeram parte da geração do modelo (60%) em comparação com os dados independentes do modelo (40%). Os resultados mostraram que a análise discriminante foi capaz de reclassificar as amostras de solo dentro de suas respectivas classes de forma satisfatória, sendo possível empregar-la em ambientes retrabalhados.

O objetivo deste trabalho foi integrar, em uma base de dados geoespacial, informações a respeito da distribuição dos solos na paisagem, bem como de seus atributos dentro de uma Reserva Particular do Patrimônio Natural (RPPN), situada no município de Lobato, Estado do Paraná. Todas as características de aspecto físico e morfológico obtidas foram incorporadas em um Sistema de Informações Geográficas (SIG). Diante dos dados das análises e do estudo de sua distribuição espacial, as unidades fisiográficas passaram a constituir unidades resultando na produção de mapas.