Search

This paper proposes an iterative methodology to integrate large-scale behavioral activity-based models with dynamic traffic assignment models. The main novelty of the proposed approach is the decoupling of the two parts, allowing the ex-post integration of any existing model as long as certain assumptions are satisfied. A measure of error is defined to characterize a search space easily explorable within its boundaries. Within it, a joint distribution of the number of trips and travel times is identified as the equilibrium distribution, i.e., the distribution for which trip numbers and travel times are bound in the neighborhood of the equilibrium between supply and demand. The approach is tested on a medium-sized city of 400,000 inhabitants and the results suggest that the proposed iterative approach does perform well, reaching equilibrium between demand and supply in a limited number of iterations thanks to its perturbation techniques. Overall, 15 iterations are needed to reach values of the measure of error lower than 10%. The equilibrium identified this way is then validated against baseline distributions to demonstrate the goodness of the results.

The use of Agent-Based and Activity-Based modeling in transportation is rising due to the capability of addressing complex applications such as disruptive trends (e.g., remote working and automation) or the design and assessment of disaggregated management strategies. Still, the broad adoption of large-scale disaggregate models is not materializing due to the inherently high complexity and computational needs. Activity-based models focused on behavioral theory, for example, may involve hundreds of parameters that need to be calibrated to match the detailed socio-economical characteristics of the population for any case study. This paper tackles this issue by proposing a novel Bayesian Optimization approach incorporating a surrogate model in the form of an improved Random Forest, designed to automate the calibration process of the behavioral parameters. The proposed method is tested on a case study for the city of Tallinn, Estonia, where the model to be calibrated consists of 477 behavioral parameters, using the SimMobility MT software. Satisfactory performance is achieved in the major indicators defined for the calibration process: the error for the overall number of trips is equal to 4% and the average error in the OD matrix is 15.92 vehicles per day.

This paper deals with traffic control at motorway bottlenecks assuming the existence of an unknown, time-varying, Fundamental Diagram (FD). The FD may change over time due to different traffic compositions, e.g., light and heavy vehicles, as well as in the presence of connected and automated vehicles equipped with different technologies at varying penetration rates, leading to inconstant and uncertain driving characteristics. A novel methodology, based on Model Reference Adaptive Control, is proposed to robustly estimate in real-time the time-varying set-points that maximise the bottleneck throughput, particularly useful when the traffic is regulated via a feedback-based controller. Furthermore, we demonstrate the global asymptotic stability of the proposed controller through a Lyapunov analysis. The effectiveness of the proposed approach is evaluated via simulation experiments, where the estimator is integrated into a feedback ramp-metering control strategy, employing a second-order multi-lane macroscopic traffic flow model, modified to account for time-varying FDs., Comment: in IEEE Transactions on Intelligent Transportation Systems

Agent based modelling has acquired the spotlight in the transportation domain both in scientific literature and in real life applications, thanks to its capability to deal with the ever-growing complexity of transportation systems, including future disrupting mobility technologies and services such as automated driving, Mobility as a Service, and micromobility. Different software emerged, dedicated to the simulation of disaggregate travel demand framing individual choices based on the profile of each agent. Still, the actual research work exploiting these models is scarce and the professionals with the knowledge to use them are few. This may be ascribed to the large amount of needed input data or to a lack of commercial solutions and of research production detailing the process leading to the actual simulations. In this paper, a methodology to spatially assign a synthetic population by exploiting publicly available aggregate data is presented and implemented on a case study. In doing so, the paper provides a systematic approach for a quick and efficient treatment of the data needed for activity-based demand generation. Finally, the obtained dataset, representing a synthetic population of the city of Tallinn, Estonia, and its spatial assignment, is described so that it may be exploited by fellow researchers, since both the tools needed for spatial assignment and the resulting dataset are made available as open source., Comment: Validation section added, results validated against mobile phone data from additional referenced source. Results unchanged

This paper presents two case studies where a macroscopic model-based approach for traffic state estimation, which we have recently developed, is employed and tested. The estimation methodology is developed for a "mixed" traffic scenario, where traffic is composed of both ordinary and connected vehicles. Only average speed measurements, which may be obtained from connected vehicles reports, and a minimum number (sufficient to guarantee observability) of spot sensor-based total flow measurements are utilised. In the first case study, we use NGSIM microscopic data in order to test the capability of estimating the traffic state on the basis of aggregated information retrieved from moving vehicles and considering various penetration rates of connected vehicles. In the second case study, a longer highway stretch with internal congestion is utilised, in order to test the capability of the proposed estimation scheme to produce appropriate estimates for varying traffic conditions on long stretches. In both cases the performances are satisfactory, and the obtained results demonstrate the effectiveness of the methodology, both in qualitative and quantitative terms., Comment: Submitted to the the 95th Annual Meeting of the Transportation Research Board (TRB) and for publication to Transportation Research Record (TRR) on July 28, 2015

A macroscopic model-based approach for estimation of the traffic state, specifically of the (total) density and flow of vehicles, is developed for the case of "mixed" traffic, i.e., traffic comprising both ordinary and connected vehicles. The development relies on the following realistic assumptions: (i) The density and flow of connected vehicles are known at the (local or central) traffic monitoring and control unit on the basis of their regularly reported positions, and (ii) the average speed of conventional vehicles is roughly equal to the average speed of connected vehicles. Thus, complete traffic state estimation (for arbitrarily selected segments in the network) may be achieved by merely estimating the percentage of connected vehicles with respect to the total number of vehicles. A model is derived, which describes the dynamics of the percentage of connected vehicles, utilizing only well-known conservation law equations that describe the dynamics of the density of connected vehicles and of the total density of all vehicles. Based on this model, which is a linear time-varying system, an estimation algorithm for the percentage of connected vehicles is developed employing a Kalman filter. The estimation methodology is validated through simulations using a second-order macroscopic traffic flow model as ground truth for the traffic state. The approach calls for a minimum of spot sensor-based total flow measurements {according to a variety of possible location configurations., Comment: Submitted to the IEEE Conference on Decision and Control on March 24th 2014