Search

This work investigates the sulfate and chloride resistance of cement composites (mortar and concrete) manufactured using electrolyzed water. Control and electrolyzed water-based cement composites were prepared using distilled water and 30 min electrolyzed water, respectively. These were exposed to 5% Na2SO4, 3.5% NaCl, and a combined mixture of 5% Na2SO4 and 3.5% NaCl solution for 200 days. Additionally, rebar reinforced control and electrolyzed water-based samples were exposed to ambient air and 5% NaCl solution for 180 days, and their corrosion potential was monitored. For control specimens, the results show compressive strength losses of 5, 12.4, and 6.1% when exposed to the above solutions, respectively, whilst for electrolyzed water-based specimens, the losses were reduced to 1, 10.1, and 3.4%, respectively. Statistical analysis of the potential values from the accelerated corrosion tests also show reduced corrosion (58 mV less negative potential) in rebar embedded in electrolyzed water-based specimen (−548 mV at 180 days) than in control specimen (−606 mV). Based on the spectral and microstructural analysis, the enhanced durability performance of electrolyzed water-based specimens is attributed to the lower ingress of deleterious agents through the less porous and compact microstructure of the hardened composites.

The present work highlights the influence of lithology on water quality in Méiganga and its surroundings. The main geological formations in this region include gneiss, granite and amphibolite. The soils developed on these rocks are of ABC type, which are acidic to slightly acidic. Electrical conductivity (EC), organic matter, total nitrogen, nitrate-nitrogen, sulfate, chloride, phosphorus and exchangeable base values were low to very low in the soil samples. Groundwater samples were investigated for their physicochemical characteristics. The wide ranges of EC values (15.1–436 µS/cm) and total dissolved solids (9–249 mg/L) revealed the heterogeneous distribution of hydrochemical processes within the groundwater of the area. The relative abundance of major dissolved species (mg/L) was Ca2+ > Na+ > Mg2+ > K+ for cations and HCO3− >> NO3− > Cl− > SO42− for anions. All the groundwater samples were soft, with total hardness values (2.54–136.65 mg/L) below the maximum permissible limits of the World Health Organization (WHO) guideline. The majority of water samples (67%) were classified as mixed CaMg-HCO3 type. Alkaline earth metal contents dominated those of alkali metals in 66.66% of samples. Thus, for the studied groundwater, Mg2+ and Ca2+ ion adsorption by clay minerals was almost nonexistent; this implies their release into the solution, which accounts for their high concentrations compared to alkali metals. Ion geochemistry revealed that water-rock interactions (silicate weathering) and ion exchange processes regulated the groundwater chemistry. One water sample points towards the evaporation domain of this diagram, indicating that groundwater probably does not originate from a deeper system. Kaolinite is the most stable secondary phase in the waters in the study area, in accordance with the geochemical process of monosiallitization, which predominated in the humid tropical zone.

Silicon (Si) and silicon/graphite (Si/Gr) composite anodes are promising candidates due to their high theoretical capacity, low operating potential and natural abundance for high energy density Li-ion batteries. Green electrode production, eliminating organic volatile solvents require advancement of aqueous electrodes. Engineering the binder plays a critical role for improving waterborne electrodes. Lithium substituted polyacrylic acid LiPAA has been demonstrated as a promising binder for Si/Gr anodes and for Ni-rich cathodes in different cell configurations. LiPAA is utilized to minimize the volume expansion during cycling for Si/Gr anodes. LiPAA is formed in situ during cathode slurry preparation to regulate the pH and dimmish the Li loss. Using advanced characterization techniques, we investigated the slurries, electrodes, and active material reaction with LiPAA and its effect to the cycling performance. Our results indicate that the performance of high Si containing anode is limited by the amount of Si in the electrode. The failure mechanism with respect to high Si content was studied thoroughly. Aqueous processed cathodes with LiPAA binder in combination with Si anodes outperformed NMP based cathodes. Hence, LiPAA was successfully utilized as an active binder for both a high Si containing anode and for a Ni rich cathode., (© 2024 Wiley-VCH GmbH.)

Nowadays, solid electrolytes are considered the main alternative to conventional liquid electrolytes in lithium batteries. The fabrication of these materials is however limited by the strict synthesis conditions, requiring high temperatures which can negatively impact the final performances. Here, it is shown that a modification of garnet-based Li 7 La 3 Zr 2 O 12 (LLZO) and the incorporation of tellurium can accelerate the synthesis process by lowering the formation temperature of cubic LLZO at temperatures below 700 °C. Optimized synthesis at 750 °C showed a decrease in particle size and cell parameter for samples with higher amounts of Te and the evaluation of electrochemical performances reported for LLZO Te0.25 a value of ionic conductivity of 5,15×10 -5  S cm -1 after hot-pressing at 700 °C, two orders of magnitude higher than commercial Al-LLZO undergoing the same working conditions, and the highest value at this densification temperature. Partial segregation of Te-rich phases occurs for high-temperature densification. Our study shows the advantages of Te insertion on the sintering process of LLZO garnet and demonstrates the achievement of highly conductive LLZO with a low-temperature treatment., (© 2023 The Authors. ChemSusChem published by Wiley-VCH GmbH.)

Magnesium-ion batteries (MIBs) are of considerable interest as environmentally more sustainable, cheaper, and safer alternatives to Li-ion systems. However, spontaneous electrolyte decomposition occurs due to the low standard reduction potential of Mg, leading to the deposition of layers known as native solid electrolyte interphases (n-SEIs). These layers may inhibit the charge transfer (electrons and ions) and, therefore, reduce the specific power and cycle life of MIBs. We propose scanning electrochemical microscopy (SECM) as a microelectrochemical tool to locally quantify the electronic properties of n-SEIs for MIBs. These interphases are spontaneously formed upon contact of Mg metal disks with organoaluminate, organoborate, or bis(trifluoromethanesulfonyl)imide (TFSI)-based electrolyte solutions. Our results unveil increased local electronic and global ionic insulating properties of the n-SEI formed when using TFSI-based electrolytes, whereas a low electronically protecting character is observed with the organoaluminate solution, and the organoborate solution being in between them. Moreover, ex situ morphological and chemical characterization was performed on the Mg samples to support the results obtained by the SECM measurements. Differences in the electronic and ionic conductivities of n-SEIs perfectly correlate with their chemical compositions., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Many synthetic polymers used to form polymer-brush films feature a main backbone with functional, oligomeric side chains. While the structure of such graft polymers mimics biomacromolecules to an extent, it lacks the monodispersity and structural purity present in nature. Here we demonstrate that side-chain heterogeneity within graft polymers significantly influences hydration and the occurrence of hydrophobic interactions in the subsequently formed brushes and consequently impacts fundamental interfacial properties. This is demonstrated for the case of poly(methacrylate)s (PMAs) presenting oligomeric side chains of different length ( n ) and dispersity. A precise tuning of brush structure was achieved by first synthesizing oligo(2-ethyl-2-oxazoline) methacrylates (OEOXMAs) by cationic ring-opening polymerization (CROP), subsequently purifying them into discrete macromonomers with distinct values of n by column chromatography, and finally obtaining poly[oligo(2-ethyl-2-oxazoline) methacrylate]s (POEOXMAs) by reversible addition-fragmentation chain-transfer (RAFT) polymerization. Assembly of POEOXMA on Au surfaces yielded graft polymer brushes with different side-chain dispersities and lengths, whose properties were thoroughly investigated by a combination of variable angle spectroscopic ellipsometry (VASE), quartz crystal microbalance with dissipation (QCMD), and atomic force microscopy (AFM) methods. Side-chain dispersity, or dispersity within brushes, leads to assemblies that are more hydrated, less adhesive, and more lubricious and biopassive compared to analogous films obtained from graft polymers characterized by a homogeneous structure.

Cu 0 -mediated surface-initiated ATRP (Cu 0 SI-ATRP) emerges as a versatile, oxygen-tolerant process to functionalize three-dimensional (3D), microporous supports forming single and multiple polymer-brush gradients with a fully tunable composition. When polymerization mixtures are dispensed on a Cu 0 -coated plate, this acts as oxygen scavenger and source of active catalyst. In the presence of an ATRP initiator-bearing microporous elastomer placed in contact with the metallic plate, the reaction solution infiltrates by capillarity through the support, simultaneously triggering the controlled growth of polymer brushes. The polymer grafting process proceeds with kinetics that are determined by the progressive infiltration of the reaction solution within the microporous support and by the continuous diffusion of catalyst regenerated at the Cu 0 surface. The combination of these effects enables the accessible generation of 3D polymer-brush gradients extending across the microporous scaffolds used as supports, finally providing materials with a continuous variation of interfacial composition and properties.

Cyclic macromolecules do not feature chain ends and are characterized by a higher effective intramolecular repulsion between polymer segments, leading to a higher excluded-volume effect and greater hydration with respect to their linear counterparts. As a result of these unique properties, hydrogels composed of cross-linked cyclic polymers feature enhanced mechanical strength while simultaneously incorporating more solvent with respect to networks formed from their linear analogues with identical molar mass and chemical composition. The translation of topology effects by cyclic polymers into the properties of polymer networks provides hydrogels that ideally do not include defects, such as dangling chain ends, and display unprecedented physicochemical characteristics., (© 2020 Wiley-VCH GmbH.)

Polymer composition and topology of surface-grafted polyacids determine the amplitude of their pH-induced swelling transition. The intrinsic steric constraints characterizing cyclic poly(2-carboxypropyl-2-oxazoline) ( c -PCPOXA) and poly(2-carboxyethyl-2-oxazoline) ( c -PCEOXA) forming brushes on Au surfaces induce an enhancement in repulsive interactions between charged polymer segments upon deprotonation, leading to an amplified expansion and a significant increment in swelling with respect to their linear analogues of similar molar mass. On the other hand, it is the composition of polyacid grafts that governs their hydration in both undissociated and ionized forms, determining the degree of swelling during their pH-induced transition.

The potassium channel Kv1.3, involved in several important pathologies, is the target of a family of psoralen-based drugs whose mechanism of action is not fully understood. Here we provide evidence for a physical interaction of the mitochondria-located Kv1.3 (mtKv1.3) and Complex I of the respiratory chain and show that this proximity underlies the death-inducing ability of psoralenic Kv1.3 inhibitors. The effects of PAP-1-MHEG (PAP-1, a Kv1.3 inhibitor, with six monomeric ethylene glycol units attached to the phenyl ring of PAP-1), a more soluble novel derivative of PAP-1 and of its various portions on mitochondrial physiology indicate that the psoralenic moiety of PAP-1 bound to mtKv1.3 facilitates the diversion of electrons from Complex I to molecular oxygen. The resulting massive production of toxic Reactive Oxygen Species leads to death of cancer cells expressing Kv1.3. In vivo, PAP-1-MHEG significantly decreased melanoma volume. In summary, PAP-1-MHEG offers insights into the mechanisms of cytotoxicity of this family of compounds and may represent a valuable clinical tool., (Copyright © 2020. Published by Elsevier B.V.)

The physicochemical properties of cyclic polymer adsorbates are significantly influenced by the steric and conformational constraints introduced during their cyclization. These translate into a marked difference in interfacial properties between cyclic polymers and their linear counterparts when they are grafted onto surfaces yielding nanoassemblies or polymer brushes. This difference is particularly clear in the case of cyclic polymer brushes that are designed to chemically interact with the surrounding environment, for instance, by associating with biological components present in the medium, or, alternatively, through a response to a chemical stimulus by a significant change in their properties. The intrinsic architecture characterizing cyclic poly(2-oxazoline)-based polyacid brushes leads to a broad variation in swelling and nanomechanical properties in response to pH change, in comparison with their linear analogues of identical composition and molecular weight. In addition, cyclic glycopolymer brushes derived from polyacids reveal an enhanced exposure of galactose units at the surface, due to their expanded topology, and thus display an increased lectin-binding ability with respect to their linear counterparts. This combination of amplified responsiveness and augmented protein-binding capacity renders cyclic brushes invaluable building blocks for the design of "smart" materials and functional biointerfaces.

Polymer-topology effects can alter technologically relevant properties when cyclic macromolecules are applied within diverse materials formulations. These include coatings, polymer networks, or nanostructures for delivering therapeutics. While substituting linear building blocks with cyclic analogues in commonly studied materials is itself of fundamental interest, an even more fascinating observation has been that the introduction of physical or chemical boundaries (e.g., a grafting surface or cross-links) can amplify the topology-related effects observed when employing cyclic polymer-based precursors for assembling multidimensional objects. Hence, the application of cyclic polymers has enabled the fabrication of coatings with enhanced biorepellency and superior lubricity, broadened the tuning potential for mechanical properties of polymer networks, increased the thermodynamic stability, and altered the capability of loading and releasing drugs within polymeric micelles.

The use of zerovalent iron (Fe 0 )-coated plates, which act both as a source of catalyst and as a reducing agent during surface-initiated atom transfer radical polymerization (SI-ATRP), enables the controlled growth of a wide range of polymer brushes under ambient conditions utilizing either organic or aqueous reaction media. Thanks to its cytocompatibility, Fe 0 SI-ATRP can be applied within cell cultures, providing a tool that can broadly and dynamically modify the substrate's affinity toward cells, without influencing their viability. Upon systematically assessing the application of Fe-based catalytic systems in the controlled grafting of polymers, Fe 0 SI-ATRP emerges as an extremely versatile technique that could be applied to tune the physicochemical properties of a cell's microenvironments on biomaterials or within tissue engineering constructs.

The modification of a variety of biomaterials and medical devices often encompasses the generation of biopassive and lubricious layers on their exposed surfaces. This is valid when the synthetic supports are required to integrate within physiological media without altering their interfacial composition and when the minimization of shear stress prevents or reduces damage to the surrounding environment. In many of these cases, hydrophilic polymer brushes assembled from surface-interacting polymer adsorbates or directly grown by surface-initiated polymerizations (SIP) are chosen. Although growing efforts by polymer chemists have been focusing on varying the composition of polymer brushes in order to attain increasingly bioinert and lubricious surfaces, the precise modulation of polymer architecture has simultaneously enabled us to substantially broaden the tuning potential for the above-mentioned properties. This feature article concentrates on reviewing this latter strategy, comparatively analyzing how polymer brush parameters such as molecular weight and grafting density, the application of block copolymers, the introduction of branching and cross-links, or the variation of polymer topology beyond the simple, linear chains determine highly technologically relevant properties, such as biopassivity and lubrication.

Targeting small molecules to appropriate subcellular compartments is a way to increase their selectivity and effectiveness while minimizing side effects. This can be accomplished either by stably incorporating specific "homing" properties into the structure of the active principle, or by attaching to it a targeting moiety via a labile linker, i.e., by producing a "targeting pro-drug." Mitochondria are a recognized therapeutic target in oncology, and blocking the population of the potassium channel Kv1.3 residing in the inner mitochondrial membrane (mtKv1.3) has been shown to cause apoptosis of cancerous cells expressing it. These concepts have led us to devise novel, mitochondria-targeted, membrane-permeant drug candidates containing the furocoumarin (psoralenic) ring system and the triphenylphosphonium (TPP) lipophilic cation. The strategy has proven effective in various cancer models, including pancreatic ductal adenocarcinoma, melanoma, and glioblastoma, stimulating us to devise further novel molecules to extend and diversify the range of available drugs of this type. New compounds were synthesized and tested in vitro ; one of them-a prodrug in which the coumarinic moiety and the TPP group are linked by a bridge comprising a labile carbonate bond system-proved quite effective in in vitro cytotoxicity assays. Selective death induction is attributed to inhibition of mtKv1.3. This results in oxidative stress, which is fatal for the already-stressed malignant cells. This compound may thus be a candidate drug for the mtKv1.3-targeting therapeutic approach.

Functional block copolymers based on poly(2-oxazoline)s are versatile building blocks for the fabrication of dual-drug delivery nanoparticles (NPs) for anticancer chemotherapy. Core-shell NPs are fabricated from diblock copolymers featuring a long and hydrophilic poly(2-methyl-2-oxazoline) (PMOXA) block coupled to a relatively short and functionalizable poly(2-methylsuccinate-2-oxazoline) (PMestOXA) segment. The PMOXA block stabilizes the NP dispersions, whereas the PMestOXA segment is used to conjugate pterostilbene, a natural bioactive phenolic compound that is used as lipophilic model-drug and constitutes the hydrophobic core of the designed NPs. Subsequent loading of the NPs with clofazimine (CFZ), an inhibitor of the multidrug resistance pumps typically expressed in a large variety of cancer cells, provides an additional function to their formulation. Optimization of the copolymer composition allows the design of polymer scaffolds showing low toxicity and capable of assembling into highly stable NPs dispersions at physiologically relevant pH. In addition, the incorporation of CFZ increases the stability of the NPs and stimulates their internalization by RAW 264.7 cells.

Previous results link the mitochondrial potassium channel Kv1.3 (mitoKv1.3) to the regulation of apoptosis. By synthesizing new, mitochondria-targeted derivatives (PAPTP and PCARBTP) of PAP-1, a specific membrane-permeant Kv1.3 inhibitor, we have recently provided evidence that both drugs acting on mitoKv1.3 are able to induce apoptosis and reduce tumor growth in vivo without affecting healthy tissues and cells. In the present article, by exploiting these new drugs, we addressed the question whether mitoKv1.3 contributes to the regulation of cell proliferation as well. When used at low concentrations, which do not compromise cell survival, both drugs slightly increased the percentage of cells in S phase while decreased the population at G0/G1 stage of cells from two different pancreatic ductal adenocarcinoma lines. Our data suggest that the observed modulation is related to ROS levels within the cells, opening the way to link mitochondrial ion channel function to downstream, ROS-related signaling events that might be important for cell cycle progression.

Prodrugs of resveratrol are under development. Among the long-term goals, still largely elusive, are (1) modulating physical properties (e.g., water-soluble derivatives bearing polyethylene glycol chains), (2) changing distribution in the body (e.g., galactosyl derivatives restricted to the intestinal lumen), (3) increasing absorption from the gastrointestinal tract (e.g., derivatives imitating the natural substrates of endogenous transporters), and (4) hindering phase II metabolism (e.g., temporarily blocking the hydroxyls), all contributing to (5) increasing bioavailability. The chemical bonds that have been tested for functionalization include carboxyester, acetal, and carbamate groups. A second approach, which can be combined with the first, seeks to reinforce or modify the biochemical activities of resveratrol by concentrating the compound at specific subcellular sites. An example is provided by mitochondria-targeted derivatives. These proved to be pro-oxidant and cytotoxic in vitro, selectively killing fast-growing and tumor cells when supplied in the low micromolar range. This suggests the possibility of anticancer applications., (© 2017 New York Academy of Sciences.)

The biomedical effects of the natural phenol pterostilbene are of great interest but its bioavailability is negatively affected by the phenolic group in position 4' which is an ideal target for the conjugative enzymes of phase II metabolism. We report the synthesis and characterization of prodrugs in which the hydroxyl moiety is reversibly protected as a carbamate ester linked to the N-terminus of a natural amino acid. Prodrugs comprising amino acids with hydrophobic side chains were readily absorbed after intragastric administration to rats. The Area Under the Curve for pterostilbene in blood was optimal when prodrugs with isoleucine or β-alanine were used. The prodrug incorporating isoleucine was used for further studies to map distribution into major organs. When compared to pterostilbene itself, administration of the isoleucine prodrug afforded increased absorption, reduced metabolism and higher concentrations of pterostilbene, sustained for several hours, in most of the organs examined. Experiments using Caco-2 cells as an in vitro model for human intestinal absorption suggest that the prodrug could have promising absorption profiles also in humans; its uptake is partly due to passive diffusion, and partly mediated by H + -dependent transporters expressed on the apical membrane of enterocytes, such as PepT1 and OATP., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The potassium channel Kv1.3 is highly expressed in the mitochondria of various cancerous cells. Here we show that direct inhibition of Kv1.3 using two mitochondria-targeted inhibitors alters mitochondrial function and leads to reactive oxygen species (ROS)-mediated death of even chemoresistant cells independently of p53 status. These inhibitors killed 98% of ex vivo primary chronic B-lymphocytic leukemia tumor cells while sparing healthy B cells. In orthotopic mouse models of melanoma and pancreatic ductal adenocarcinoma, the compounds reduced tumor size by more than 90% and 60%, respectively, while sparing immune and cardiac functions. Our work provides direct evidence that specific pharmacological targeting of a mitochondrial potassium channel can lead to ROS-mediated selective apoptosis of cancer cells in vivo, without causing significant side effects., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Multi-walled carbon nanotubes, MWCNTs, are stabilized thanks to the surface wrapping of single-strand DNA, ss-DNA; the resulting adducts are kinetically and thermodynamically stable Such entities build up nano-hybrids with titania, TiO 2 , nano-particles, in presence of surfactant as an adjuvant. The conditions leading to TiO 2 adsorption onto ss-DNA/CNTs were investigated, by optimizing the concentration of adducts, nano-particles (NPs), and of the cationic surfactant (CTAB). Controlling the working conditions makes possible to get homogeneously organized hybrids. Characterization by DLS, electro-phoretic mobility, SEM and AFM clarified the surfactant-assisted association modes between adducts and CTAB-functionalized TiO 2 . Nano-particles' clustering onto DNA-wrapped adducts gives hybrids trough electrostatic interactions. Surface coverage by TiO 2 is significant and homogeneous. It is expected that the reported hybrids can be useful for applications in heterogeneous catalysis., (Copyright © 2016. Published by Elsevier B.V.)

The cyclic polymer topology strongly alters the interfacial, physico-chemical properties of polymer brushes, when compared to the linear counterparts. In this study, we especially concentrated on poly-2-ethyl-2-oxazoline (PEOXA) cyclic and linear grafts assembled on titanium oxide surfaces by the "grafting-to" technique. The smaller hydrodynamic radius of ring PEOXAs favors the formation of denser brushes with respect to linear analogs. Denser and more compact cyclic brushes generate a steric barrier that surpasses the typical entropic shield by a linear brush. This phenomenon, translates into an improved resistance towards biological contamination from different protein mixtures. Moreover, the enhancement of steric stabilization coupled to the intrinsic absence of chain ends by cyclic brushes, produce surfaces displaying a super-lubricating character when they are sheared against each other. All these topological effects pave the way for the application of cyclic brushes for surface functionalization, enabling the modulation of physico-chemical properties that could be just marginally tuned by applying linear grafts., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Plant polyphenols exhibit potentially useful effects in a wide variety of pathophysiological settings. They interact with proteins such as signalling kinases, transcription factors and ion channels, and modulate redox processes, such as those taking place in mitochondria. Biomedical applications of these natural compounds are however severely hindered by their low bioavailability, rapid metabolism, and often by unfavourable physico-chemical properties, e.g. a generally low water solubility. Derivatives are under development with the aim of improving their bioavailability and/or bioefficacy. Various strategies can be adopted. An increase in circulating blood levels of non-metabolized natural compound may be attainable through prodrugs. In the ideal prodrug, phenolic hydroxyls are protected by capping groups which a) help or at least do not hinder permeation of epithelia; b) prevent conjugative modifications during absorption and first-pass through the liver; c) are eliminated with opportune kinetics to regenerate the parent compound. Moreover, prodrugs may be designed with the goals of modulating physical properties of the parent compound, and/or changing its distribution in the body. A more specific action may be achieved by concentrating the compounds at specific sites of action. An example of the second approach is represented by mitochondria-targeted redox-active polyphenol derivatives, designed to intervene on radical processes in these organelles and as a tool either to protect cells from oxidative insults or to precipitate their death. Mitochondrial targeting can be achieved through conjugation with a triphenylphosphonium lipophilic cation. Quercetin and resveratrol were chosen as model polyphenols for these proof-of-concept studies. Data available at the moment show that both quercetin and resveratrol mitochondria-targeted derivatives are pro-oxidant and cytotoxic in vitro, selectively killing fast-growing and tumoural cells when supplied in the low μM range; the mechanism of ROS generation appears to differ between the two classes of compounds. These approaches are emerging as promising strategies to obtain new efficient chemopreventive and/or chemotherapeutic drugs based on polyphenols derivatives.

The tumor necrosis factor-receptor-associated factor 2 (TRAF2)- and Nck-interacting kinase (TNIK) is a ubiquitously expressed member of the germinal center kinase family. The TNIK functions in hematopoietic cells and the role of TNIK-TRAF interaction remain largely unknown. By functional proteomics we identified TNIK as interaction partner of the latent membrane protein 1 (LMP1) signalosome in primary human B-cells infected with the Epstein-Barr tumor virus (EBV). RNAi-mediated knockdown proved a critical role for TNIK in canonical NF-κB and c-Jun N-terminal kinase (JNK) activation by the major EBV oncoprotein LMP1 and its cellular counterpart, the B-cell co-stimulatory receptor CD40. Accordingly, TNIK is mandatory for proliferation and survival of EBV-transformed B-cells. TNIK forms an activation-induced complex with the critical signaling mediators TRAF6, TAK1/TAB2, and IKKβ, and mediates signalosome formation at LMP1. TNIK directly binds TRAF6, which bridges TNIK's interaction with the C-terminus of LMP1. Separate TNIK domains are involved in NF-κB and JNK signaling, the N-terminal TNIK kinase domain being essential for IKKβ/NF-κB and the C-terminus for JNK activation. We therefore suggest that TNIK orchestrates the bifurcation of both pathways at the level of the TRAF6-TAK1/TAB2-IKK complex. Our data establish TNIK as a novel key player in TRAF6-dependent JNK and NF-κB signaling and a transducer of activating and transforming signals in human B-cells., Competing Interests: The authors have declared that no competing interests exist.

Aims: CD73 (ecto-5'-nucleotidase) is expressed by a broad range of immune cells and attenuates inflammation in several acute disease models. This study therefore explored the role of CD73-derived adenosine in a model of chronic vascular inflammation such as atherogenesis., Methods and Results: CD73(-/-) mice were backcrossed into the apolipoprotein E (ApoE(-/-)) background. In CD73(-/-)/ApoE(-/-) double mutants, atherosclerotic lesion formation was increased by ∼50% compared with ApoE(-/-). However, the cellular composition and extracellular matrix of the plaques did not differ. Surprisingly, we found significant activity and expression of CD73 in the plaque of ApoE(-/-) mice which increased over time. CD73 co-localized with macrophages, Tregs, and cells of mesenchymal origin. Genome-wide microarray analysis of the aorta lacking CD73 revealed upregulation of endothelin-1 (Edn1) mRNA together with changes of genes in lipid metabolism and the Wnt and nuclear factor kappa B pathways. Measurement of plasma levels verified the upregulation of Edn1 in CD73(-/-) and double mutants. Plasma triglycerides (TG) were also found to be significantly elevated in the CD73(-/-)/ApoE(-/-) mice compared with ApoE(-/-) controls., Conclusion: Lack of CD73 promotes atherogenesis most likely by de-inhibition of resident macrophages and T cells. Elevated Edn1 and TG levels may have contributed. This establishes CD73-derived adenosine as a direct or indirect regulator of atherogenesis.

CD73-derived adenosine acts as potent inhibitor of inflammation, and regulatory T cells (Treg) have been shown to express CD73 as a novel marker. This study explored the role of endogenously formed adenosine in modulating NF-κB activity and cytokine/chemokine release from murine Treg and effector T cells (Teff) including key enzymes/purinergic receptors of extracellular ATP catabolism. Stimulating murine splenocytes and CD4(+) T cells with anti-CD3/anti-CD28 significantly upregulated activated NF-κB in CD73(-/-) T cells (wild type: 4.36 ± 0.21; CD73(-/-): 6.58 ± 0.75; n = 4; P = 0.029). This was associated with an augmented release of proinflammatory cytokines IL-2, TNF-α, and IFN-γ. Similar changes were observed with the CD73 inhibitor APCP (50 μM) on NF-κB and IFN-γ in wild-type CD4(+) T-cells. Treatment of stimulated CD4(+) T-cells with adenosine (25 μM) potently reduced IFN-γ release which is mediated by adenosine A2a receptors (A2aR). AMP (50 μM) also reduced cytokine release which was not inhibited by APCP. In Teff, A2aR activation (CGS21680) potently inhibited the release of IL-1, IL-2, IL-3, IL-4, IL-12, IL-13, IFN-γ, TNF-α, granulocyte-macrophage colony-stimulating factor (GM-CSF), CCL3, and CCL4. However, in Treg, CGS21680 did not alter cytokine/chemokine release. In summary, CD73-derived adenosine tonically inhibits active NF-κB in CD4(+) T-cells, thereby modulating the release of a broad spectrum of proinflammatory cytokines and chemokines. Downregulation of P2X7 and upregulation of CD73 in Treg after antigenic stimulation may be an important mechanism to maintain the ability of Treg to generate immunosuppressive adenosine.

Prodrugs of adenosine A(2A) receptor agonists were developed that are activated by ecto-5'-nucleotidase (ecto-5'-NT, CD73). Because ecto-5'-NT is upregulated in inflamed tissue, the A(2A) agonists are expected to be released from their prodrug form at the sites of inflammation. 2-(Ar)alkyl-substituted AMP derivatives were synthesized and investigated. Certain 2-substituted AMP derivatives, including 2-hexylthio-AMP, 2-cyclopentylthio-AMP, 2-cyclohexylmethylthio-AMP, and 2-cyclohexylethylthio-AMP were accepted as substrates by ecto-5'-NT and readily converted to the corresponding 2-substituted adenosine derivatives. The 2-cyclohexylethylthio substitution was a good compromise between the requirements of the ecto-5'-NT and the adenosine A(2A) receptor. The corresponding AMP derivative (12g) was a similarly good substrate as AMP itself, while the resulting adenosine derivative (11g) was a relatively potent A(2A) agonist (radioligand binding to rat brain striatal membranes: K(i) = 372 nM; inhibition of anti-CD3/anti-CD28-induced IFN-gamma release in mouse CD4+ cells: EC(50) = 50 nM). Compound 11g was released from 12g by incubation with CD4+ cells isolated from wild-type mice but only to a much smaller extent by cells from ecto-5'-NT knockout mice. Compound 12g will be a new lead structure for the development of more potent and selective ecto-5'-NT-activated prodrugs of selective anti-inflammatory A(2A) receptor agonists.