Search

We present an analytical formalism, supported by numerical simulations, for studying forces that act on curved walls following temperature quenches of the surrounding ideal Brownian fluid. We show that, for curved surfaces, the post-quench forces initially evolve rapidly to an extremal value, whereafter they approach their steady state value algebraically in time. In contrast to the previously-studied case of flat boundaries (lines or planes), the algebraic decay for curved geometries depends on the dimension of the system. Specifically, steady-state values of the force are approached in time as t - d /2 in d -dimensional spherical (curved) geometries. For systems consisting of concentric circles or spheres, the exponent does not change for the force on the outer circle or sphere. However, the force exerted on the inner circles or sphere experiences an overshoot and, as a result, does not evolve to the steady state in a simple algebraic manner. The extremal value of the force also depends on the dimension of the system, and originates from curved boundaries and the fact that particles inside a sphere or circle are locally more confined, and diffuse less freely than particles outside the circle or sphere., (Creative Commons Attribution license.)

Current models of phoretic transport rely on molecular forces creating a "diffuse" particle-fluid interface. We investigate theoretically an alternative mechanism, in which a diffuse interface emerges solely due to a nonvanishing correlation length of the surrounding solution. This mechanism can drive self-motility of a chemically active particle. Numerical estimates indicate that the velocity can reach micrometers per second. The predicted phenomenology includes a bilinear dependence of the velocity on the activity and a possible double velocity reversal upon varying the correlation length.

We investigate a granular gas in a shaken quasi-two-dimensional box in molecular dynamics computer simulations. After a sudden change (quench) of the shaking amplitude, transient density correlations are observed orders of magnitude beyond the steady-state correlation length scale. Propagation of the correlations is ballistic, in contrast to recently investigated quenches of Brownian particles that show diffusive propagation [Rohwer et al., Phys. Rev. Lett. 118, 015702 (2017)PRLTAO0031-900710.1103/PhysRevLett.118.015702, Rohwer et al., Phys. Rev. E 97, 032125 (2018)2470-004510.1103/PhysRevE.97.032125]. At sufficiently strong cooling of the fluid the effect is overlaid by clustering instability of the homogeneous cooling state with different scaling behavior. We are able to identify different quench regimes. In each regime correlations exhibit remarkably universal position dependence. In simulations performed with side walls we find confinement effects for temperature and pressure in steady-state simulations and an additional transient wall pressure contribution when changing the shaking amplitude. The transient contribution is ascribed to enhanced relaxation of the fluid in the presence of walls. From incompatible scaling behavior we conclude that the observed effects with and without side walls constitute distinct phenomena.

Perturbations of fluid media can give rise to non-equilibrium dynamics, which may, in turn, cause motion of immersed inclusions or tracer particles. We consider perturbations ("activations") that are local in space and time, of a fluid density which is conserved, and study the resulting diffusiophoretic phenomena that emerge at a large distance. Specifically, we consider cases where the perturbations propagate diffusively, providing examples from passive and active matter for which this is expected to be the case. Activations can, for instance, be realized by sudden and local changes in interaction potentials of the medium or by local changes in its activity. Various analytical results are provided for the case of confinement by two parallel walls. We investigate the possibility of extracting work from inclusions, which are moving through the activated fluid. Furthermore, we show that a time-dependent density profile, created via suitable activation protocols, allows for the conveyance of inclusions along controlled and stable trajectories. In contrast, in states with a steady density, inclusions cannot be held at stable positions, reminiscent of Earnshaw's theorem of electrostatics. We expect these findings to be applicable in a range of experimental systems. The phenomena described here are argued to be distinct from other forms of phoresis such as thermophoresis.

Fluctuation-induced forces occur generically when long-range correlations (e.g., in fluids) are confined by external bodies. In classical systems, such correlations require specific conditions, e.g., a medium close to a critical point. On the other hand, long-range correlations appear more commonly in certain nonequilibrium systems with conservation laws. Consequently, a variety of nonequilibrium fluctuation phenomena, including fluctuation-induced forces, have been discovered and explored recently. Here we address a long-standing problem of nonequilibrium critical Casimir forces emerging after a quench to the critical point in a confined fluid with order-parameter-conserving dynamics and non-symmetry-breaking boundary conditions. The interplay of inherent (critical) fluctuations and dynamical nonlocal effects (due to density conservation) gives rise to striking features, including correlation functions and forces exhibiting oscillatory time dependences. Complex transient regimes arise, depending on initial conditions and the geometry of the confinement. Our findings pave the way for exploring a wealth of nonequilibrium processes in critical fluids (e.g., fluctuation-mediated self-assembly or aggregation). In certain regimes, our results are applicable to active matter.

In a recent study [Phys. Rev. E 94, 022103 (2016)2470-004510.1103/PhysRevE.94.022103] it has been shown that, for a fluid film subject to critical adsorption, the resulting critical Casimir force (CCF) may significantly depend on the thermodynamic ensemble. Here we extend that study by considering fluid films within the so-called ordinary surface universality class. We focus on mean-field theory, within which the order parameter (OP) profile satisfies Dirichlet boundary conditions and produces a nontrivial CCF in the presence of external bulk fields or, respectively, a nonzero total order parameter within the film. Additionally, we study the influence of fluctuations by means of Monte Carlo simulations of the three-dimensional Ising model. We show that, in the canonical ensemble, i.e., when fixing the so-called total mass within the film, the CCF is repulsive for large absolute values of the total OP, instead of attractive as in the grand canonical ensemble. Based on the Landau-Ginzburg free energy, we furthermore obtain analytic expressions for the order parameter profiles and analyze the relation between the total mass in the film and the external bulk field.

We study the linear response of interacting active Brownian particles in an external potential to simple shear flow. Using a path integral approach, we derive the linear response of any state observable to initiating shear in terms of correlation functions evaluated in the unperturbed system. For systems and observables which are symmetric under exchange of the x and y coordinates, the response formula can be drastically simplified to a form containing only state variables in the corresponding correlation functions (compared to the generic formula containing also time derivatives). In general, the shear couples to the particles by translational as well as rotational advection, but in the aforementioned case of xy symmetry, only translational advection is relevant in the linear regime. We apply the response formulas analytically in solvable cases and numerically in a specific setup. In particular, we investigate the effect of a shear flow on the morphology and the stress of N confined active particles in interaction, where we find that the activity as well as additional alignment interactions generally increase the response.

This corrects the article DOI: 10.1103/PhysRevLett.118.015702.

Nonequilibrium systems with conserved quantities like density or momentum are known to exhibit long-ranged correlations. This, in turn, leads to long-ranged fluctuation-induced (Casimir) forces, predicted to arise in a variety of nonequilibrium settings. Here, we study such forces, which arise transiently between parallel plates or compact inclusions in a gas of particles, following a change ("quench") in temperature or activity of the medium. Analytical calculations, as well as numerical simulations of passive or active Brownian particles, indicate two distinct forces: (i) The immediate effect of the quench is adsorption or desorption of particles of the medium to the immersed objects, which in turn initiates a front of relaxing (mean) density. This leads to time-dependent density-induced forces. (ii) A long-term effect of the quench is that density fluctuations are modified, manifested as transient (long-ranged) (pair-)correlations that relax diffusively to their (short-ranged) steady-state limit. As a result, transient fluctuation-induced forces emerge. We discuss the properties of fluctuation-induced and density-induced forces as regards universality, relaxation as a function of time, and scaling with distance between objects. Their distinct signatures allow us to distinguish the two types of forces in simulation data. Our simulations also show that a quench of the effective temperature of an active medium gives rise to qualitatively similar effects to a temperature quench in a passive medium. Based on this insight, we propose several scenarios for the experimental observation of the forces described here.

Starting from the stochastic equation for the density operator, we formulate the exact (instantaneous) stress tensor for interacting Brownian particles and show that its average value agrees with expressions derived previously. We analyze the relation between the stress tensor and forces due to external potentials and observe that, out of equilibrium, particle currents give rise to extra forces. Next, we derive the stress tensor for a Landau-Ginzburg theory in generic, non-equilibrium situations, finding an expression analogous to that of the exact microscopic stress tensor, and discuss the computation of out-of-equilibrium (classical) Casimir forces. Subsequently, we give a general form for the stress tensor which is valid for a large variety of energy functionals and which reproduces the two mentioned cases. We then use these relations to study the spatio-temporal correlations of the stress tensor in a Brownian fluid, which we compute to leading order in the interaction potential strength. We observe that, after integration over time, the spatial correlations generally decay as power laws in space. These are expected to be of importance for driven confined systems. We also show that divergence-free parts of the stress tensor do not contribute to the Green-Kubo relation for the viscosity.

Second-order phase transitions are characterized by a divergence of the spatial correlation length of the order parameter fluctuations. For confined systems, this is known to lead to remarkable equilibrium physical phenomena, including finite-size effects and critical Casimir forces. We explore here some non-equilibrium aspects of these effects in the stationary state resulting from the action of external forces: by analyzing a model of a correlated fluid under shear, spatially confined by two parallel plates, we study the resulting viscosity within the setting of (Gaussian) Landau-Ginzburg theory. Specifically, we introduce a model in which the hydrodynamic velocity field (obeying the Stokes equation) is coupled to an order parameter with dissipative dynamics. The well-known Green-Kubo relation for bulk systems is generalized for confined systems. This is shown to result in a non-local Stokes equation for the fluid flow, due to the correlated fluctuations. The resulting effective shear viscosity shows universal as well as non-universal contributions, which we study in detail. In particular, the deviation from the bulk behavior is universal, depending on the ratio of the correlation length and the film thickness L. In addition, at the critical point the viscosity is proportional to [Formula: see text], where [Formula: see text] is a dynamic length scale. These findings are expected to be experimentally observable, especially for systems where the bulk viscosity is affected by critical fluctuations.

We compute fluctuation-induced (Casimir) forces for classical systems after a temperature quench. Using a generic coarse-grained model for fluctuations of a conserved density, we find that transient forces arise even if the initial and final states are force free. In setups reminiscent of Casimir (planar walls) and van der Waals (small inclusions) interactions, we find comparable exact universal expressions for the force. Dynamical details only scale the time axis of transient force curves. We propose that such quenches can be achieved, for instance, in experiments on active matter, employing tunable activity or interaction protocols.

We study the convergence of statistical estimators used in the estimation of large-deviation functions describing the fluctuations of equilibrium, nonequilibrium, and manmade stochastic systems. We give conditions for the convergence of these estimators with sample size, based on the boundedness or unboundedness of the quantity sampled, and discuss how statistical errors should be defined in different parts of the convergence region. Our results shed light on previous reports of "phase transitions" in the statistics of free energy estimators and establish a general framework for reliably estimating large-deviation functions from simulation and experimental data and identifying parameter regions where this estimation converges.