Search

Abstract The insertion of new distributed energy resources, such as distributed generation (DG), energy storage systems (ESS), demand response (DR), and microgrids (MG), is emerging, bringing new challenges to the current distribution network. In this regard, the active distribution networks (I) with multi-microgrids concept appears. The present paper proposes a hierarchical (master-slave problem) computational model to achieve optimal coordinated operation of multi-microgrids connected to an I. Day-ahead operation planning of an I was formulated as a multiperiod non-linear optimal power flow model, resulting in a non-linear optimization problem, additionally, the day-ahead operation planning of MGs was formulated as a multiperiod linearized optimal power flow resulting in a mixed-integer linear optimization problem. Numerical results on four different test-system microgrids connected to a 359-nodes ADNs test-system belonging to a Brazilian distribution company show the effectiveness of the proposed model and solution strategy. Three cases have been tested: with a maximum load-shedding restriction, without this restriction, and considering insertion of DG. Besides, the hierarchical model can evaluate how much losses and load shedding take effect without integrated operation and expansion planning of emerging distributed networks. This study showed the importance of analyzing the systemic impact of integrating multi-MGs and I synergistic operation interactions, resulting in improvements in the voltage quality levels, operation costs, and power losses. The results showed that, including DG in the system, the costs were reduced by 13,48% compared to the case base.

A NILM dataset is a valuable tool in the development of Non-Intrusive Load Monitoring techniques, as it provides a means of evaluation of novel techniques and algorithms, as well as for benchmarking. The figure of merit of a NILM dataset includes characteristics such as the sampling frequency of the voltage, current, or power, the availability of indications (ground-truth) of load events during recording, the variety and representativeness of the loads, and the variety of situations these loads are subject to. Considering such aspects, the proposed LIT-Dataset was designed, populated, evaluated, and made publicly available to support NILM development. Among the distinct features of the LIT-Dataset is the labeling of the load events at sample level resolution and with an accuracy and precision better than 5 ms. The availability of such precise timing information, which also includes the identification of the load and the sort of power event, is an essential requirement both for the evaluation of NILM algorithms and techniques, as well as for the training of NILM systems, particularly those based on Machine Learning.

Photovoltaic (PV) energy use has been increasing recently, mainly due to new policies all over the world to reduce the application of fossil fuels. PV system efficiency is highly dependent on environmental variables, besides being affected by several kinds of faults, which can lead to a severe energy loss throughout the operation of the system. In this sense, we present a Monitoring System (MS) to measure the electrical and environmental variables to produce instantaneous and historical data, allowing to estimate parameters that ar related to the plant efficiency. Additionally, using the same MS, we propose a recursive linear model to detect faults in the system, while using irradiance and temperature on the PV panel as input signals and power as output. The accuracy of the fault detection for a 5 kW power plant used in the test is 93.09%, considering 16 days and around 143 hours of faults in different conditions. Once a fault is detected by this model, a machine-learning-based method classifies each fault in the following cases: short-circuit, open-circuit, partial shadowing, and degradation. Using the same days and faults applied in the detection module, the accuracy of the classification stage is 95.44% for an Artificial Neural Network (ANN) model. By combining detection and classification, the overall accuracy is 92.64%. Such a result represents an original contribution of this work, since other related works do not present the integration of a fault detection and classification approach with an embedded PV plant monitoring system, allowing for the online identification and classification of different PV faults, besides real-time and historical monitoring of electrical and environmental parameters of the plant.

A multi-agent architecture for a Non-Intrusive Load Monitoring (NILM) solution is presented and evaluated. The underlying rationale for such an architecture is that each agent (load event detection, feature extraction, and classification) outperforms others of the same type in particular scenarios; hence, by combining the expertise of these agents, the system presents an improved performance. Known NILM algorithms, as well as new algorithms, proposed by the authors, were individually evaluated and compared. The proposed architecture considers a NILM system composed of Load Monitoring Modules (LMM) that report to a Center of Operations, required in larger facilities. For the purposed of evaluating and comparing performance, five load event detect agents, five feature extraction agents, and five classification agents were studied so that the best combinations of agents could be implemented in LMMs. To evaluate the proposed system, the COOLL and the LIT-Dataset were used. Performance improvements were detected in all scenarios, with power-ON and power-OFF detection improving up to 13%, while classification accuracy improved up to 9.4%.