Search

The self-assembly of poly(dimethylsiloxane)-b-poly(trimethylene carbonate) (PDMS-b-PTMC) bottlebrush block polymers was investigated under different processing conditions. Small-angle X-ray scattering (SAXS) and UV/Visible spectroscopy provided insight into the self-assembly and structure in response to heating and applied pressure. In the absence of applied pressure (i.e., before annealing), the PDMS-b-PTMC bottlebrush block polymers are white solids and adopt small, randomly oriented lamellar grains. Heating the materials to 140 °C in the absence of applied pressure appears to “lock in” the isotropic, short-range-ordered state, preventing the formation of the long-range-ordered lamellar structure responsible for photonic properties. Applying modest anisotropic pressure (3 psi) between parallel plates at ambient temperature orients the short-range lamellar grains; however, applied pressure alone does not produce long-range order. Only when the bottlebrush block polymers were heated (>100 °C) under modest pressure (3 psi) were long-range-ordered photonic crystals formed. Analysis of the SAXS data motivated analogies to liquid crystals and revealed the potential self-assembly pathway. These results provide insight into the structure and self-assembly of bottlebrush block polymers with low glass transition temperature side chains in response to different processing conditions.

Cyclopolymerization is a powerful method for synthesizing polyacetylenes containing four- to seven-membered rings. However, the structure of the repeat unit only consists of mono-cycloalkene due to the single cyclization of diyne monomers. Herein, we demonstrate a novel cascade cyclopolymerization to synthesize polyacetylenes containing fused bicyclic rings from triyne monomers containing bulky dendrons via sequential cascade ring-closing metathesis. These dendrons provided solubility and stability to the rigid bicyclic polyacetylene backbone. In addition, we controlled the regioselectivity of the catalyst approach by altering its structure and synthesized polymers containing fused bicyclo[4,3,0] or [4,4,0] rings with high molecular weights of up to 120 kg mol

Electrochemical CO2 reduction over Cu could provide value-added multicarbon hydrocarbons and alcohols. Despite recent breakthroughs, it remains a significant challenge to design a catalytic system with high product selectivity. Here we demonstrate that a high selectivity of ethylene (55%) and C2+ products (77%) could be achieved by a highly modular tricomponent copolymer modified Cu electrode, rivaling the best performance using other modified polycrystalline Cu foil catalysts. Such a copolymer can be conveniently prepared by a ring-opening metathesis polymerization, thereby offering a new degree of freedom for tuning the selectivity. Control experiments indicate all three components are essential for the selectivity enhancement. A surface characterization showed that the incorporation of a phenylpyridinium component increased the film robustness against delamination. It was also shown that its superior performance is not due to a morphology change of the Cu underneath. Molecular dynamics (MD) simulations indicate that a combination of increased local CO2 concentration, increased porosity for gas diffusion, and the local electric field effect together contribute to the increased ethylene and C2+ product selectivity.

Ovarian cancer survival and recurrence rate are drastically affected by the amount of tumor that can be surgically removed prior to chemotherapy. Surgeons are currently limited to visual inspection, making smaller tumors difficult to remove surgically. Enhancing the surgeon’s ability to selectively remove cancerous tissue would have a positive effect on a patient’s prognosis. One approach to aid in surgical tumor removal involves using targeted fluorescent probes to selectively label cancerous tissue. To date, there has been a trade off in balancing two requirements for the surgeon: the ability to see maximal tumors and the ability to identify these tumors by eye while performing the surgery. The ability to see maximal tumors has been prioritized and this has led to the use of fluorophores activated by near-infrared (NIR) light as NIR penetrates most deeply in this surgical setting, but the light emitted by traditional NIR fluorophores is invisible to the naked eye. This has necessitated the use of specialty detectors and monitors that the surgeon must consult while performing the surgery. In this study, we develop nanoparticles that selectively label ovarian tumors and are activated by NIR light but emit visible light. This potentially allows for maximal tumor observation and real time detection by eye during surgery. We designed two generations of up-converting nanoparticles (UCNPs) that emit green light when illuminated with NIR light. These particles specifically label ovarian tumors most likely via tumor-associated macrophages (TAMs), which are prominent in the tumor microenvironment. Our results demonstrate that this approach is viable means of visualizing tumors during surgery without the need for complicated, expensive, and bulky detection equipment. Continued improvement and experimentation could expand our approach into a much needed surgical technique to aid ovarian tumor removal.

The synthesis of some “reverse pyridine” bis(phosphinite) pincer complexes of nickel and rhodium is reported. N-Functionalization of a POCOP ligand with a borane Lewis acid was found to permit cyclometalation with metal precursors, which reacted with the free base ligand in an undesired manner. Convenient removal of the coordinated Lewis acid was accomplished using polymer-supported 4-dimethylaminopyridine. The effects of borane Lewis acid coordination on the physical and spectroscopic properties of the pincer complexes were also assessed.

Complexes with the formula [M(diimine)(CN-BR3)4]2–, where diimine = bipyridine (bpy), phenanthroline (phen), 3,5-trifluoromethylbipyridine (flpy), R = Ph, C6F5, and M = FeII, RuII, were synthesized...

An unsaturated polymer's cis/trans-olefin content has a significant influence on its properties. For polymers obtained by ring-opening metathesis polymerization (ROMP), the cis/trans-olefin content can be tuned by using specific catalysts. However, cis-selective ROMP has suffered from narrow monomer scope and lack of control over the polymerization (giving polymers with broad molecular weight distributions and prohibiting the synthesis of block copolymers). Herein, we report the versatile cis-selective controlled living ROMP of various endo-tricyclo[4.2.2.02,5]deca-3,9-diene and various norbornene derivatives using a fast-initiating dithiolate-chelated Ru catalyst. Polymers with cis-olefin content as high as 99% could be obtained with high molecular weight (up to Mn of 105.1 kDa) and narrow dispersity (

A concise and stereoselective total synthesis of the clinically relevant tricyclic prostaglandin D(2) metabolite (tricyclic-PGDM) methyl ester in racemic form was accomplished in 8 steps from a readily available known cyclopentene-diol derivative. The synthesis features a nickel-catalyzed Ueno-Stork-type dicarbofunctionalization to generate two consecutive stereocenters, a palladium-catalyzed carbonylative spirolactonization to build the core oxaspirolactone, and a Z-selective cross metathesis to introduce the (Z)-3-butenoate side chain, a group challenging to introduce through traditional Wittig protocols and troublesome for the two previous total syntheses. A general Z-selective cross metathesis protocol to construct (Z)-β,γ-unsaturated esters was also developed that has broad functional group tolerance and high stereoselectivity. Additionally, our synthesis already accumulated 75 mg of valuable material for an (18)O tricyclic-PGDM based assay used in clinical settings for inflammation.

Cyclic polymers are topologically interesting and envisioned as a lubricant material. However, scalable synthesis of pure cyclic polymers remains elusive. The most straightforward way is to recycle a used catalyst for the synthesis of cyclic polymers. Unfortunately, it is demanding because of the catalyst’s vulnerability and inseparability from polymers, which depreciates the practicality of the process. Here, we develop a continuous process streamlined in a circular way that polymerization, polymer separation, and catalyst recovery happen in situ, to dispense a pure cyclic polymer after bulk ring-expansion metathesis polymerization of cyclopentene. It is enabled by introducing silica-supported ruthenium catalysts and a newly-designed glassware. Also, different depolymerization kinetics of the cyclic polymer from its linear analogue is discussed. This process minimizes manual labor, maximizes security of vulnerable catalysts, and guarantees purity of cyclic polymers, thereby showcasing a prototype of a scalable access to cyclic polymers with increased reusability of precious catalysts (≥415,000 turnovers).

We use fac-[Re(bpy)(CO)3Cl] ([Re-Cl]) dispersed in polymer ion gel (PIG) ([Re]-PIG) to carry out electrocatalytic CO2 reduction in water. Electrolysis at -0.68 V vs. RHE in a CO2-saturated KOH and K2CO3 solution produces CO with over 90% Faradaic efficiency. The PIG electrode is readily combined with water oxidation catalysts to generate a full electrochemical cell. Additionally, we provide evidence that the PIG electrode can be implemented with other molecular catalysts.

An enantioselective synthesis of 15-deoxy-Δ12,14-prostaglandin J2 is reported. The synthesis begins with the preparation of enantiopure 3-oxodicyclopentadiene by a lipase-mediated kinetic resolution. A three-component coupling followed by a retro-Diels-Alder reaction provides the C8 stereochemistry of the prostaglandin skeleton with high enantioselectivity. Stereoretentive olefin metathesis followed by a Pinnick oxidation affords 15-deoxy-Δ12,14-prostaglandin J2 in high enantiopurity.

The mechanism of Ru-catalyzed ring-opening metathesis polymerization (ROMP) is studied in detail using a pair of third generation ruthenium catalysts with varying sterics of the N-heterocyclic carbene (NHC) ligand. Experimental evidence for polymer chelation to the Ru center is presented in support of a monomer-dependent mechanism for polymerization of norbornene monomers using these fast-initiating catalysts. A series of kinetic experiments, including rate measurements for ROMP, rate measurements for initiation, monomer-dependent kinetic isotope effects, and activation parameters were useful for distinguishing chelating and nonchelating monomers and determining the effect of chelation on the polymerization mechanism. The formation of a chelated metallacycle is enforced by both the steric bulk of the NHC and by the geometry of the monomer, leading to a ground-state stabilization that slows the rate of polymerization and also alters the reactivity of the propagating Ru center toward different monomers in copolymerizations. The results presented here add to the body of mechanistic work for olefin metathesis and may inform the continued design of catalysts for ROMP to access new polymer architectures and materials.

Understanding the stability and reactivity of the propagating species is critical in living polymerization. Therefore, most living olefin metathesis polymerizations require the stabilization of the catalyst by coordination of external ligands containing Lewis basic heteroatoms, e.g., phosphines and pyridines. However, in some cases, chemists postulated that the propagating metal carbene could also be stabilized by olefin chelation. Here, we disclose that stable 16-electron olefin-chelated Ru carbenes play a key role in previously reported living/controlled ring-opening metathesis polymerization of endo-tricyclo[4.2.2.0^(2,5)]deca-3,9-diene and cyclopolymerization of 1,8-nonadiynes using Grubbs catalysts. We successfully isolated these propagating species during polymerization and confirmed their olefin-chelated structures using X-ray crystallography and NMR analysis. DFT calculations and van ’t Hoff plots from the equilibrium between olefin-chelated Ru carbenes and 3-chloropyridine (Py)-coordinated carbenes revealed that entropically favored olefin chelation overwhelmed enthalpically more stable Py-coordinated Ru carbenes at room temperature. Therefore, olefin chelation stabilized the propagating species and slowed down the propagation relative to initiation, thereby lowering polydispersity. This finding provides a deeper understanding of the olefin metathesis polymerization mechanism using Grubbs catalysts and offers clues for designing new controlled/living polymerizations.

α-Oxygenated Z -olefins are ubiquitous in biologically active molecules and serve as versatile handles for organic synthesis, but their syntheses are often tedious and less selective. Here we report the efficient Z -selective metathesis of various terminal acrylates and allyl alcohols, which enables facile and selective construction of high value-added α-oxygenated Z -olefins from readily available feedstock chemicals. These challenging metathesis transformations are enabled by novel cyclometalated Ru-carbene-nitrate complexes bearing bulky-yet-flexible side arms, whose assembly was unlocked by new organometallic syntheses.

Bottlebrush polymers consist of a linear backbone with densely grafted side chains which impact the rigidity of the molecule. The persistence length of the bottlebrush backbone in solution is influenced by both the intrinsic structure of the polymer and the local environment, such as the solvent quality and concentration. Increasing the concentration reduces the overall size of the molecule because of the reduction in backbone stiffness. In this study, we map out the size of a bottlebrush polymer as a function of concentration for a single backbone length. Small-angle neutron scattering measurements are conducted on a polynorbornene-based bottlebrush with polystyrene side chains in a good solvent. The data are fit using a model which provides both the long and short axis radius of gyration (R_(g,2) and R_(g,1), respectively), providing a measure for how the conformation changes as a function of concentration. At low concentrations, a highly anisotropic structure is observed (R_(g,2)/R_(g,1) ≈ 4), becoming more isotropic at higher concentrations (R_(g,2)/R_(g,1) ≈ 1.5). The concentration scaling for both R_(g,2) and the overall Rg is evaluated and compared with predictions in the literature. Coarse-grained molecular dynamics simulations were also conducted to probe the impact of concentration on bottlebrush conformation, showing qualitative agreement with the experimental results.

Electrochemical CO

Developing donors for Ziegler‐Natta (ZN) catalysis to control the polymerization reaction and produce polymers with desirable properties has always been challenging due to the multi‐component nature of the catalytic systems. Here, we have developed a new synthetic protocol for making two external donors, D 1 (2,2,2‐trifluoroethyl myristate) and D 2 (2,2,2‐trifluoroethyl palmitate) that show self‐extinguishing properties, followed by a systematic DFT study to understand this peculiar property of these donors. D 1 and D 2 can undergo parallel reactions with aluminum and titanium species present in the system to produce ketones and aldehydes, which are poisons for ZN catalytic systems, thus explaining their self‐extinguishing nature. The non‐covalent interaction between the long alkyl chain of the donors with the surface plays a vital role in determining the donors' self‐extinguishing nature. There is a significant thermodynamic preference for the binding of the donor with the longer alkyl chain at the titanium center. The current work, therefore, provides interesting insights into how self‐extinguishing donors function in ZN catalytic systems.

Bottlebrush block copolymers (BBCPs) are intriguing architectural variations on linear BCPs with highly tunable structure. Confinement can have a significant impact on polymer assembly, giving rise to changes in morphology, assembly kinetics, and properties like the glass transition. Given that confinement leads to significant changes in the persistence length of bottlebrush homopolymers, it is reasonable to expect that BBCPs will see significant changes in their structure and periodicity relative to the bulk morphology. Understanding how confinement influences assembly will be important for designing BBCPs for thin film applications including membranes, integrated photonic structures, and potentially BCP lithography. In order to study the effects of confinement on BBCP conformation and morphology, a blade coating was used to prepare films with continuous variation in film thickness. Unlike thin films of linear BCPs, islands/holes were not observed, and instead mixtures of parallel and perpendicular morphologies emerge after annealing. The lamellar periodicity (L0) of the morphologies is found to be thickness dependent, increasing L0 with decreasing film thickness for blade coated films. Films coated out of tetrahydrofuran (THF) resulted in a single well-defined lamellar periodicity, verified through atomic force microscopy (AFM) and grazing incidence small-angle X-ray scattering (GISAXS), which increases dramatically from the bulk value (30.6 nm) and continues to increase as the film thickness decreases. The largest observed L0 was 65.5 nm, and this closely approaches the estimated upper limit of 67 nm corresponding to a fully extended backbone in a bilayer arrangement. Films coated out of propylene glycol methyl ether acetate (PGMEA) resulted in a mixture of perpendicular lamellae and a smaller, likely cylindrical morphology. The lamellar portion of the film shows the same thickness dependence as the lamellae observed in the THF coated films. The scaling of the lamellar L0 with respect to film thickness follows predictions for confined semiflexible polymers with weak excluded volume interactions and can be related to models for confinement of DNA. Spin coated films shows the same reduction in periodicity, although at very different film thicknesses. This result suggests that the material has shallow free-energy barriers to transitioning between different L0 and morphologies, a property that could be taken advantage of for patterning diverse structures with a single material.

The efficient Z-selective cross-metathesis between acrylamides and common terminal olefins has been developed by the use of novel cyclometalated ruthenium catalysts with bulky N-heterocyclic carbene (NHC) ligands. Superior reactivity and stereoselectivity are realized for the first time in this challenging transformation, allowing streamlined access to an important class of cis-Michael acceptors from readily available feedstocks. The kinetic preference for cross-metathesis is enabled by a pivalate anionic ligand, and the origin of this effect is elucidated by density functional theory calculations.

Small-angle scattering measurements of complex macromolecules in solution are used to establish relationships between chemical structure and conformational properties. Interpretation of the scattering data requires an inverse approach where a model is chosen and the simulated scattering intensity from that model is iterated to match the experimental scattering intensity. This raises challenges in the case where the model is an imperfect approximation of the underlying structure, or where there are significant correlations between model parameters. We examine three bottlebrush polymers (consisting of polynorbornene backbone and polystyrene side chains) in a good solvent using a model commonly applied to this class of polymers: the flexible cylinder model. Applying a series of constrained Monte-Carlo Markov Chain analyses demonstrates the severity of the correlations between key parameters and the presence of multiple close minima in the goodness of fit space. We demonstrate that a shape-agnostic model can fit the scattering with significantly reduced parameter correlations and less potential for complex, multimodal parameter spaces. We provide recommendations to improve the analysis of complex macromolecules in solution, highlighting the value of Bayesian methods. This approach provides richer information for understanding parameter sensitivity compared to methods which produce a single, best fit.

The efficient

A robust synthesis of gem-dialkyl acyclic diene monomers has been developed. This route is scalable, flexible, and biorenewable, allowing for the production of a wide range of diene monomers of different lengths and different gem-dialkyl substitution starting from unsaturated esters derived from seed oils. The metathesis polymerization of these monomers and the hydrogenation of the resulting polyolefins leads to telechelic gem-dialkyl polyethylenes, which can be used as elastomers in the synthesis of polyurethanes and other block polymers.

Complexes with the formula [M(diimine)(CN-BR

A series of second-generation dendronized wedge polymers were synthesized by ring-opening metathesis polymerization, and the linear viscoelastic response over a wide range of temperatures was investigated. From 0 to 90 °C the dynamic moduli (G′(ω) and G″(ω)) were determined, and frequency–temperature superposition was used to create master curves that showed behavior from the terminal zone to the glassy regime. An apparent extremely low rubbery plateau of ∼10 kPa was observed in both the dynamic response and in the corresponding van Gurp–Palmen plot. However, further investigation shows that the apparent rubbery plateau is related to the steady-state recoverable compliance, not the onset of entanglements. In addition, these wedge polymers exhibit an extremely low glassy modulus of ∼100 MPa at 0 °C, which is shown to increase at 1 Hz to ∼700 MPa at −80 °C for the wedge polymer 2G-EHW-311. In addition, both small- and wide-angle X-ray scattering patterns were obtained for all of the polymers investigated, and these showed that the polymer molecules adopt an extended cylinder conformation. Furthermore, based on calorimetric measurements, the polymers were found to exhibit two glass transition temperatures, with a 100 K difference between the higher (T_(g,hi) = 26.8 ± 0.7 °C) and lower glass transition temperatures (T_(g,lo) = −76.1 ± 1.1 °C) for the 2G-EHW-311 material. Hence, an intermediate regime extends to well below the T_(g,hi) to T_(g,lo), providing an explanation for the low glassy modulus of ∼100 MPa at 0 °C and its increase to ∼700 MPa when measured at T_(g,hi) – 100 °C and approaching the T_(g,lo).

An unsaturated polymer's

Correction for 'Aqueous electrocatalytic CO

Δ12-Prostaglandin J family is recently discovered and has potent anticancer activity. Concise syntheses of four Δ12-prostaglandin J natural products (7–8 steps in the longest linear sequences) are reported, enabled by convergent stereoretentive cross-metathesis. Exceptional control of alkene geometry was achieved through stereoretention.

Nitrile hydration provides access to amides that are indispensable to researchers in chemical and pharmaceutical industries. Prohibiting the use of this venerable reaction, however, are (1) the dearth of biphasic catalysts that can effectively hydrate nitriles at ambient temperatures with high turnover numbers and (2) the unsolved challenge of hydrating cyanohydrins. Herein, we report the design of new “donor–acceptor”-type platinum catalysts by precisely arranging electron-rich and electron-deficient ligands trans to one other, thereby enhancing both the nucleophilicity of the hydroxyl group and the electrophilicity of the nitrile group. Leveraging a high-throughput, automated workflow and evaluating a library of bidentate ligands, we have discovered that commercially available, inexpensive DPPF [1,1′-ferrocenendiyl-bis(diphenylphosphine)] provides superior reactivity. The corresponding “donor–acceptor”-type catalyst 2a is readily prepared from (DPPF)PtCl_2, PMe_2OH, and AgOTf. The enhanced activity of 2a permits the hydration of a wide range of nitriles and cyanohydrins to proceed at 40 °C with excellent turnover numbers. Rational reevaluation of the ligand structure has led to the discovery of modified catalyst 2c, harboring the more electron-rich 1,1′-bis[bis(5-methyl-2-furanyl)phosphino] ferrocene ligand, which demonstrates the highest activity toward hydration of nitriles and cyanohydrins at room temperature. Finally, the correlation between the electron-donating ability of the phosphine ligands with catalyst efficiencies of 2a, 2c, 2d, and 2e in the hydration of nitrile 7 are examined, and the results support the “donor–acceptor” hypothesis.

Cyclic polymers have drawn considerable interest for their peculiar physical properties in comparison to linear polymers, despite their equivalent compositions. Synthetically, cyclic polymers can be accessed through either macrocyclic ring‐closure or by ring‐expansion polymerization, but the main challenge with either method is the production of highly pure cyclic polymer samples. This highlight describes advances in the area of cyclic polymer synthesis, with a particular focus on ring‐expansion metathesis polymerization. Methods for characterizing cyclic polymers and assessing their purity are also discussed in order to emphasize the need for additional robust and reliable methods for synthesizing and studying topologically complex macromolecules. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 228–242

The addition of vinyl ethers to Z-selective, cyclometalated ruthenium metathesis catalysts generates Fischer carbene complexes. Although Fischer carbenes are usually thought to be metathesis inactive, we show that Fischer carbenes are metathesis active under certain circumstances. These species were found to decompose facilely to Ru hydride complexes, as identified by both experiment and computation. Since vinyl ethers are often used to quench metathesis reactions implementing Ru-based metathesis catalysts, their decomposition to hydrides can have a deleterious effect on the desired stereochemistry of the olefin product.

Ru-based metathesis catalysts employed in cyclopolymerization (CP) of 1,6-heptadiyne derivatives have promoted regioselective α-addition to alkynes, forming various conjugated polyenes containing exclusively five-membered repeat units. Recently, we discovered that a new chelated Ru catalyst could promote regioselective β-addition to produce analogous polyenes containing six-membered rings with moderate to good β-selectivity. Since then, we have focused our research on pursuing more active and β-selective regiocontrol to produce conjugated polymers with excellent β-selectivity, with a much broader range of monomers. Herein, we demonstrate highly β-selective CP by combining a new dithiolate-chelated Ru-based catalyst with weakly coordinating pyridine additives, which significantly enhance the conversion and β-selectivity. An in-depth mechanistic investigation by ^1H NMR revealed a prominent role for the additives, which improve the stability of the propagating carbene.

The linear viscoelastic behavior of poly(norbornene)-graft-poly(±-lactide) was investigated as a function of grafting density and overall molar mass. Eight sets of polymers with grafting densities ranging from 0 to 100% were synthesized by living ring-opening metathesis copolymerization. Within each set, the graft chain molar mass and spacing between grafts were fixed, while the total backbone length was varied. Dynamic master curves reveal that these polymers display Rouse and reptation dynamics with a sharp transition in the zero-shear viscosity data, demonstrating that grafting density strongly impacts the entanglement molar mass. The entanglement modulus (G_e) scales with inverse grafting density (n_g) as G_e ∼ n_g^(1.2) and G_e ∼ n_g^0 in accordance with scaling theory in the high and low grafting density limits, respectively. However, a sharp transition between these limiting behaviors occurs, which does not conform to existing theoretical models for graft polymers. A molecular interpretation based on thin flexible chains at low grafting density and thick semiflexible chains at high grafting density anticipates the sharp transition between the limiting dynamical regimes.

Second-generation ruthenium olefin metathesis catalysts bearing aminophosphine ligands were investigated with systematic variation of the ligand structure. The rates of phosphine dissociation (k_1; initiation rate) and relative phosphine reassociation (k_(–1)) were determined for two series of catalysts bearing cyclohexyl(morpholino)phosphine and cyclohexyl(piperidino)phosphine ligands. In both cases, incorporating P–N bonds into the architecture of the dissociating phosphine accelerates catalyst initiation relative to the parent [Ru]–PCy_3 complex; however, this effect is muted for the tris(amino)phosphine-ligated complexes, which exhibit higher ligand binding constants in comparison to those with phosphines containing one or two cyclohexyl substituents. These results, along with X-ray crystallographic data and DFT calculations, were used to understand the influence of ligand structure on catalyst activity. Especially noteworthy is the application of phosphines containing incongruent substituents (PR_1R′_2); detailed analyses of factors affecting ligand dissociation, including steric effects, inductive effects, and ligand conformation, are presented. Computational studies of the reaction coordinate for ligand dissociation reveal that ligand conformational changes contribute to the rapid dissociation for the fastest-initiating catalyst of these series, which bears a cyclohexyl-bis(morpholino)phosphine ligand. Furthermore, the effect of amine incorporation was examined in the context of ring-opening metathesis polymerization, and reaction rates were found to correlate well with catalyst initiation rates. The combined experimental and computational studies presented in this report reveal important considerations for designing efficient ruthenium olefin metathesis catalysts.

The synthesis of E-macrocycles is achieved using stereoretentive, Ru-based olefin metathesis catalysts supported by dithiolate ligands. Kinetic studies elucidate marked differences in activity among the catalysts tested, with catalyst 4 providing meaningful yields of products in much shorter reaction times than stereoretentive catalysts 2 and 3. Macrocycles were generated with excellent selectivity (>99% E) and in moderate to high yields (47–80% yield) from diene starting materials bearing two E-configured olefins. A variety of rings were constructed, ranging from 12- to 18-membered macrocycles, including the antibiotic recifeiolide.

Ruthenium-based olefin metathesis catalysts, known for their functional group tolerance and broad applicability in organic synthesis and polymer science, continue to evolve as an enabling technology in these areas. A discussion of recent mechanistic investigations is followed by an overview of selected applications.

Ruthenium benzylidene complexes containing a carbodicarbene (CDC) ligand are reported. Mechanistic studies indicate that the CDC ligand can dissociate under relatively mild conditions to afford active olefin metathesis catalysts. These catalysts were found to be effective at ring-closing metathesis (RCM) and ring-opening metathesis polymerization (ROMP) reactions.

Voltammetry of [5,10,15-tris(pentafluorophenylcorrole)]Mn(III) was investigated in four different ionic liquids (ILs): 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIm-TFSI); 1-ethyl-3-methylimidazolium ethylsulfate (EMIm-EtOSO_3); 1-ethyl-3-methylimidazolium triflate (EMIm-OTf); and 1-ethyl-3-methylimidazolium tetracyanoborate (EMIm-TCB). We found that Mn^(IV/III) E_(1/2) values depend on IL counter anion: OTf–< EtOSO_3− < TFSI− < TCB−. In EMIm-TCB and BMIm- TFSI, reversible, diffusion-controlled MnIV/III reactions occurred, as evidenced in each case by the ratio of anodic to cathodic diffusion coefficients over a range of scan rates. Axial coordination was evidenced by a cathodic to anodic diffusion coefficient ratio greater than one, an increasing cathodic to anodic peak current ratio with increasing scan rate, and a split Soret band in the UV-vis spectrum of the complex.

The ideal of living polymerization has defined research in polymer chemistry over the past 50 years. In this Perspective, we present the case that this concept has enabled the treatment of polymers as organic molecules, rather than impure mixtures of species, and allowed the translation of methods developed by synthetic organic chemists into ever more accessible living and/or controlled polymerization methods. The concurrent development of rapid analytical methods for screening new polymerization methods for living characteristics, chiefly size exclusion chromatography, has greatly aided in the expansion of living polymerization methods.

Block polymer self-assembly typically translates molecular chain connectivity into mesoscale structure by exploiting incompatible blocks with large interaction parameters (χ ij ). In this article, we demonstrate that the converse approach, encoding low-χ interactions in ABC bottlebrush triblock terpolymers (χ AC ≲ 0), promotes organization into a unique mixed-domain lamellar morphology, which we designate LAM P . Transmission electron microscopy indicates that LAM P exhibits ACBC domain connectivity, in contrast to conventional three-domain lamellae (LAM 3 ) with ABCB periods. Complementary small-angle X-ray scattering experiments reveal a strongly decreasing domain spacing with increasing total molar mass. Self-consistent field theory reinforces these observations and predicts that LAM P is thermodynamically stable below a critical χ AC , above which LAM 3 emerges. Both experiments and theory expose close analogies to ABA′ triblock copolymer phase behavior, collectively suggesting that low-χ interactions between chemically similar or distinct blocks intimately influence self-assembly. These conclusions provide fresh opportunities for block polymer design with potential consequences spanning all self-assembling soft materials.

We use fac-[Re(bpy)(CO)

Ru–cyclic alkyl amino carbene (Ru–CAAC) olefin metathesis catalysts perform extraordinarily in metathesis macrocyclization and ethenolysis, but previous studies have been limited to the use of five-membered CAAC (CAAC-5) ligands. In this work, we synthesized a different group of ruthenium catalysts with more σ-donating and π-accepting six-membered CAAC (CAAC-6) ligands, and their metathesis activity was probed through initiation studies, ring-closing metathesis (RCM), cross-metathesis, and ethenolysis. These catalysts display higher initiation rates than analogous Ru–CAAC-5 complexes but demonstrate lower activity in RCM and ethenolysis.

Ruthenium catalyzed ring closing metathesis (RCM) and ring opening metathesis polymerization (ROMP) reactions using a supported bis(arylimino)acenaphthene N-heterocyclic carbene (BIAN-NHC) complex have been reported. The BIAN-NHC Ru-complex exhibits excellent catalytic activity and tolerates a wide range of substrates at low catalyst loadings. DFT calculations were also carried out on some selected key intermediates in the reaction mechanism to study the effect of having the conjugated aromatic moiety (BIAN-NHC) in the backbone of the complex. The newly synthesized BIAN-NHC Ru-complex shows comparable catalytic activities to the commercially available second generation Ru catalyst HG2. The recycled complex was reused for up to eight reaction cycles for the RCM of N,N-diallyl tosylamine affording a high average isolated yield, with lower levels of Ru contamination in the final product.

An aldehyde-selective Wacker-type oxidation of allylic fluorides proceeds with a nitrite catalyst. The method represents a direct route to prepare β-fluorinated aldehydes. Allylic fluorides bearing a variety of functional groups are transformed in high yield and very high regioselectivity. Additionally, the unpurified aldehyde products serve as versatile intermediates, thus enabling access to a diverse array of fluorinated building blocks. Preliminary mechanistic investigations suggest that inductive effects have a strong influence on the rate and regioselectivity of the oxidation.