Search

Background Not all pregnant women seem to select the more curved lumbopelvic posture that their sexual dimorphic anatomy allows even though many previous researchers have assumed lumbopelvic curvature to be standard during pregnancy. This study is vital to understanding coevolution of lumbopelvic sexual dimorphism and bipedalism, and understanding some clinical implications of intervening in gestational posture changes. Research questions Are there anthropometric changes that correspond with selection of lumbopelvic curvature change during pregnancy? What are the biomechanical costs and benefits of gestational lumbopelvic curvature change? Methods Twenty pregnant women were tested at five different times in the 2nd and 3rd trimesters of pregnancy. Lumbopelvic posture, standing kinetics and gait kinetics were measured longitudinally. Additionally, we modeled the effects on standing and gait without lumbopelvic postural changes, but with anthropometric changes, for each individual. Results We found greater lumbopelvic angulation to correspond with a shorter body height (6 cm difference between groups, p = 0.048) and deeper 2nd trimester abdomen (2 cm difference between groups, p = 0.013). Lumbopelvic angulation lowers support requirements (in standing and walking (6% lower support impulse, p = 0.056), but at the cost of shifting the propulsive actions to a less efficient pulling action rather than pushoff (13 % reduction in pushoff time, p = 0.001). We observed minimal effects on walking kinematics and balance control. Significance Our findings suggest the evolutionary advantage of the female lumbopelvic unit is the adaptability it provides to adjust for the individual needs of the pregnant woman. We discuss multiple potential contributing factors that may have shaped hominin female lumbopelvic evolution and are involved in self-selecting lumbopelvic posture.

Purpose: We aimed to determine the step-count validity of commonly used physical activity monitors for pregnancy overground walking and during free-living conditions. Methods: Participants (n = 39, 12–38 weeks gestational age) completed six 100-step overground walking trials (three self-selected “normal pace”, three “brisk pace”) while wearing five physical activity monitors: Omron HJ-720 (OM), New Lifestyles 2000 (NL), Fitbit Flex (FF), ActiGraph Link (AG), and Modus StepWatch (SW). For each walking trial, monitor-recorded steps and criterion-measured steps were assessed. Participants also wore all activity monitors for an extended free-living period (72 hours), with the SW used as the criterion device. Mean absolute percent error (MAPE) was calculated for overground walking and free-living protocols and compared across monitors. Results: For overground walking, the OM, NL, and SW performed well (32% MAPE) actual steps taken per day as measured by the criterion SW (M [SD] = 9,350 [3,910]). MAPE for the OM was particularly high (45.3%). Conclusion: The OM, NL, and SW monitors are valid measures for overground step-counting during pregnancy walking. However, the OM and NL significantly underestimate steps by second and third trimester pregnant women in free-living conditions.

The utility of wearable sensors for continuous gait monitoring has grown substantially, enabling novel applications on mobility assessment in healthcare. Existing approaches for gait cycle detection rely on predefined or experimentally tuned platform parameters and are often platform specific, parameter sensitive, and unreliable in noisy environments with constrained generalizability. To address these challenges, we introduce CyclePro, 1 novel framework for reliable and platform-independent gait cycle detection. CyclePro offers unique features: 1) it leverages physical properties of human gait to learn model parameters; 2) captured signals are transformed into signal magnitude and processed through a normalized cross-correlation module to compensate for noise and search for repetitive patterns without predefined parameters; and 3) an optimal peak detection algorithm is developed to accurately find strides within the motion sensor data. To demonstrate the efficiency of CyclePro, three experiments are conducted: a clinical study including a visually impaired group of patients with glaucoma and a control group of healthy participants; a clinical study involving children with Rett syndrome; and an experiment involving healthy participants. The performance of CyclePro is assessed under varying platform settings and demonstrates to maintain over 93% accuracy under noisy signal, varying bit resolutions, and changes in sampling frequency. This translates into a recall of 95.3% and a precision of 93.4%, on average. Moreover, CyclePro can detect strides and estimate cadence using data from different sensors, with accuracy higher than 95%, and it is robust to random sensor orientations with a recall of 91.5% and a precision of 99.2%, on average. 1 Software code and sample datasets for CyclePro are publicly available at https://github.com/y-max/CycleProa

During pregnancy, anthropometric and physiological changes can result in difficulty reaching for and lifting everyday objects. The aims of this study were to determine the changes in sagittal plane anterior reach space (SPARS) and shoulder/elbow strength requirements throughout pregnancy. Seventeen participants were tested through a longitudinal observational cohort study between 16 and 36 weeks gestation in four-week intervals. A 25% decrease in SPARS was observed at the L3-4 torso height. Combined with arm mass increases, shoulder and elbow moment requirements at the minimum and maximum static reach distances significantly increased. However, inverse dynamics analysis determined that mass gains in the arm alone only minimally impact dynamic shoulder moments. Additionally, torso flexion increases throughout pregnancy demonstrates that women are attempting to compensate for decreased SPARS, possibly indicating the additional perceptual importance of reach space in accommodations for pregnant workers.

Background Dynamic balance control degrades during pregnancy, but it is not yet understood why. Mechanical aspects of the body should directly affect walking balance control, but we have recently published papers indicating that weight gains during pregnancy explain very little dynamic balance changes. Our goal was to determine if lower extremity joint kinematic changes are an indicator of walking balance control. This information is vital to understanding the route by which pregnancy increases fall risk. Methods Twenty-three pregnant women were tested at five different times in the 2nd and 3rd trimesters of pregnancy. Participants performed walking trials at a self-selected pace. Motion capture was used to measure joint kinematics (discrete and coordination variables) and body center of mass motion. Changes over time were statistically analyzed. Correlations between kinematics and walking balance were modelled with hierarchical multiple regression models. Results As pregnancy progresses, it appears that a more flexed hip posture could be driving lower extremity kinematic changes toward increased coordination between joints and increased knee and ankle motions. Walking balance changes were also detected through increased COM motion (lateral range of motion and velocity) in the lateral directions. However, there was little correlation between kinematic and balance changes (r2 0.7). Significance Our findings suggest that walking balance control is not altered by a common kinematic change between all pregnant women. While increased lateral center of mass motion should be expected with pregnancy, the kinematics leading to this increase may be person-specific. The cause of dynamic imbalance in each pregnant women (physiological, mechanical, and neurocognitive) may play an important role in determining the kinematic means by which lateral center of mass motion increases.

A qualitative biomechanics (functional anatomy) course is a typical course in kinesiology curriculum. Most evidence suggests that biomechanics learning could be improved with the inclusion of laboratory experiences. However, implementing laboratories into biomechanics curriculum is difficult due to cost and time constraints. This study was conducted to evaluate whether hands-on activities in lecture improve qualitative biomechanics learning. A lecture format was compared to the same course with guided and unguided hands-on activities included during lecture. Test performance and student evaluations were compared between lecture formats to determine if hands-on experiences improve learning. The hands-on group performed better on the same test questions and they evaluated their overall course activities as beneficial to their learning. The findings suggest that guided hands-on experiences may improve learning compared to unguided activities. The hands-on experiences seem to provide an embodied cognitive learning experience, facilitating retention of learned material through three-dimensional and tactile mental representations. Findings from this research are currently shaping how biomechanics is taught to students at this university and could at other universities as well.

Background Altered standing balance during pregnancy has been previously reported. To date, body center of mass (bCOM) motion has not been used to track balance changes in this population. We recently compared three methods to determine the torso center of mass (tCOM) location (via force plate acquired center of pressure calculation, using Pavol surface anthropometry measurements, and a combination of the two) to use in calculating the bCOM during pregnancy. Research question This current research explored two questions: (1) does walking balance change during pregnancy, and (2) do the methods for identifying tCOM location affect the resulting balance measures? Methods Fifteen pregnant women were recruited to perform 60-second trial of treadmill walking at 4-week intervals from 12 weeks gestation until delivery. Walking balance was measured as bCOM motion within the base of support. Gestation time and anthropometric model (force plate, Pavol, and combination) were repeated-measures independent variables in a general linear mixed model analysis. Results There was a significant decrease in walking balance during pregnancy. As gestation progressed, we observed non-linear changes in the bCOM motion within the base of support over time, with some changes starting early in pregnancy and others not starting until late 2nd trimester. The anthropometric model used to locate the bCOM significantly influences balance measures. The results of this study indicate that the force plate method is more appropriate for locating the tCOM in the anterior and lateral directions. Significance The results of this study will inform clinicians and patients about the gestational stage-associated changes in balance during pregnancy that increase the risk of falling and injury. Researchers should also carefully consider the method for locating the bCOM.

ObjectivesTo determine whether individuals who sustained a sports concussion would exhibit persistent impairments in gait and quiet standing compared to non-injured controls during a dual-task assessment .DesignSystematic review and meta-analysis using individual participant data (IPD).Data sourcesThe search strategy was applied across seven electronic bibliographic and grey literature databases: MEDLINE, EMBASE, CINAHL, SportDISCUS, PsycINFO, PsycARTICLES and Web of Science, from database inception until June 2017.Eligibility criteria for study selectionStudies were included if; individuals with a sports concussion and non-injured controls were included as participants; a steady-state walking or static postural balance task was used as the primary motor task; dual-task performance was assessed with the addition of a secondary cognitive task; spatiotemporal, kinematic or kinetic outcome variables were reported, and; included studies comprised an observational study design with case–control matching.Data extraction and synthesisOur review is reported in line with the Preferred Reporting Items for Systematic review and Meta-Analyses-IPD Statement. We implemented the Risk of Bias Assessment tool for Non-randomised Studies to undertake an outcome-level risk of bias assessment using a domain-based tool. Study-level data were synthesised in one of three tiers depending on the availability and quality of data: (1) homogeneous IPD; (2) heterogeneous IPD and (3) aggregate data for inclusion in a descriptive synthesis. IPD were aggregated using a ‘one-stage’, random-effects model.Results26 studies were included. IPD were available for 20 included studies. Consistently high and unclear risk of bias was identified for selection, detection, attrition, and reporting biases across studies. Individuals with a recent sports concussion walked with slower average walking speed (χ2=51.7; df=4; p2=10.3; df=4; p=0.036; mean difference −0.0039 m; 95% CI: −0.0075 to −0.0004) than controls when evaluated using a dual-task assessment up to 2 months following concussion.Summary/conclusionsOur IPD evidence synthesis identifies that, when evaluated using a dual-task assessment, individuals who had incurred a sports concussion exhibited impairments in gait that persisted beyond reported standard clinical recovery timelines of 7–10 days. Dual-task assessment (with motion capture) may be a useful clinical assessment to evaluate recovery after sports concussion.Protocol pre-registrationThis systematic review was prospectively registered in PROSPERO CRD42017064861.

We previously described two different preferred strategies used to perform a lateral load transfer. The wide stance strategy was not used successfully on a low-friction surface, while the narrow stance strategy was successful. Here, we retrospectively examined lower extremity net joint moments between successful and unsuccessful strategies to determine if there is a kinetic benefit consideration that may go into choosing the preferred strategy. Success vs. failure over a novel slippery surface was used to dichotomise 35 healthy working-age individuals into the two groups (successful and unsuccessful). Participants performed lateral load transfers over three sequential surface conditions: high friction, novel low friction and practised low friction. The unsuccessful strategy required larger start torques, but lower dynamic moments during transfer compared to the successful strategy. These results indicate that the periodically unsuccessful strategy may be preferred because it requires less muscle recruitment and lower stresses on lower extremity soft tissues. Practitioner Summary: The reason for this paper is to retrospectively examine the joint moment in two different load transfer strategies that are used in a lateral load transfer. We found that periodically unsuccessful strategies that we previously reported may be a beneficial toward reduced lower extremity joint stresses.

Background The stand-to-sit motion has been linked to falls during pregnancy. It is also used in the clinical evaluation of functional performance. The physical and physiological changes during pregnancy may necessitate a change in stand-to-sit kinematic performance. Therefore, this study was conducted to evaluate the longitudinal changes to stand-to-sit kinematics during pregnancy. Methods Fifteen pregnant women were tested in 4-week intervals from 16 weeks to 36 weeks gestational age. They performed a 60-second trial of semi-continuous stand-to-sit motion. Sagittal plane motions at the ankle, knee, spine, and shoulders were measured. Additionally, three-dimensional hip motion was measured. Discrete variables (e.g. range of motion) and joint coordinations (through vector coding) were analyzed over time through a linear mixed model analysis. Findings The results indicate a shift away from sagittal hip motion throughout pregnancy. Hip range of motion and standing angle changed in favor of spine motion. Joint coordination shifted from hip dominant to spine- and shoulder-dominate coordination just before the start of sitting motion. Hip-knee joint coordination just before seat contact shifted from hip to a knee-dominant motion during pregnancy. Interpretation Discrete variable changes in the entire stand-to-sit motion seem to be driven by initial standing posture related to an increase in gestational lordosis. Likewise, standing joint coordination shift to upper body motion can be attributed to gestational lordosis limiting functional ability around the hip. The shift in motion away from the hip may provide insight into why both fall rates and low back pain rates increase during stand-to-sit during pregnancy.

Balance changes during pregnancy likely occur because of mass gains and mass distribution changes. However, to date there is no way of tracking balance through center of mass motion because no method is available to identify of the body center of mass throughout pregnancy. We compared methods for determining segment masses and torso center of mass location. The availability of a method for tracking these changes during pregnancy will make determining balance changes through center of mass motion an option for future pregnancy balance research. Thirty pregnant women from eight weeks gestation until birth were recruited for monthly anthropometric measurements, motion capture analysis of body segment locations, and force plate analysis of center of pressure during quiet standing and supine laying. From these measurements, we were able to compare regression, volume measurement, and weighted sum methods to calculate body center of mass throughout pregnancy. We found that mass changes around the trunk were most prevalent as expected, but mass changes throughout the body (especially the thighs) were also seen. Our findings also suggest that a series of anthropometric measurements first suggested by Pavol et al. (2002), in combination with quiet standing on a force plate, can be used to identify the needed components (segment masses and torso center of mass location in three dimensions) to calculate body center of mass changes during pregnancy. The results of this study will make tracking of center of mass motion a possibility for future pregnancy balance research.

In recent years, uncontrolled manifold (UCM) analysis has emerged as an important method to study variability of human movements. The current study investigated the upper extremity movements during typical assembly tasks using the framework of the UCM analysis. Younger and older participants performed machine-paced assembly tasks, while the kinematics of upper extremities were recorded using a motion tracking system. The upper extremity was modeled as a 7 degrees-of-freedom system. The variance of joint angles within the UCM space (V UCM) and the variance perpendicular to the UCM space (V ORT) were analyzed. The results indicated that V UCM were not significantly different for the older and younger groups. For the older group, V ORT was significantly less than the younger group and resulted in less total variance (V TOT) and a better synergy level (Z ΔV ). Therefore, the synergies of upper extremity movement may not be impaired for machine-paced tasks as people age. While current results showed a different effect of aging on the synergies of body movement compared with one previous study, they were in line with a recently proposed theory that for natural tasks, aging people did not have impairment in the ability to organize upper extremity movement into synergies.

This study investigated the biomechanics of simulated sideways falls from various bed heights onto two types of protective floor mats. This article presents biomechanical injury criteria for evaluating the probability of sustaining injuries to the head, thorax, and pelvis. A side-impact dummy was raised to drop heights of 45.7 cm, 61.0 cm, and 76.2 cm and released. Two types of protective floor mats were evaluated and compared with impacts experienced on an unpadded, rigid floor. Results of the study demonstrated a high risk (> 50%) for serious head injury for falls onto an unpadded, rigid floor at 61.0-cm and 76.2-cm drop heights. Falls onto floor mats demonstrated significant reductions in injury risk to the head and pelvis for all drop heights. Thoracic injury risk was significantly reduced for all but the highest drop height. Language: en

Few studies have endeavoured to measure balance control during manual material handling. This study examined the effects of load weight during a stationary manual material handling task. In total, 36 healthy participants completed 180° lateral transfer tasks of a loaded (5% of body weight) and an unloaded box. The projection of the centre of mass onto the base of support, as measured via a passive-marker 3-D motion analysis system, was used to quantify balance control. Muscle activities of lower extremity muscles were also measured. When moving the loaded box, individuals ventured ≥ 1 cm closer to the edges of the base of support and increased centre of mass movement up to 14%. In addition, muscle electromyographic activity on both sides of the shank increased. In summary, during loaded configurations, vulnerability to loss of balance was increased and individuals appeared to adapt by increasing co-contraction of the shank muscles suggesting increased ankle stiffness. STATEMENT OF RELEVANCE: Industries requiring manual material handling have a particularly high rate of injuries due to falls. This study suggests that larger load weights during lateral material handling tasks adversely affect balance control and may create a vulnerability to imbalance throughout the entire manoeuvre.

Re-injury to the brain during recovery from an initial concussion leads to increased probability of permanent brain damage or death. Recovery from concussion has been proposed to be ongoing even up to a month post-injury. The goal of the current study was to investigate the relationship between the visuospatial orientation of attention and obstacle avoidance during gait in individuals that have recently suffered a concussion (mTBI) over a month post-injury. MTBI subjects and matched control subjects performed the attentional network test (ANT), designed to isolate several different components of attention. Obstacle crossing during gait with and without a concurrent attention dividing task was also performed. Reaction times from the ANT and obstacle clearance measurements were the main dependent variables. We observed that concussed individuals had statistically more obstacle contacts than controls. The ability to orient attention in space was also statistically deficient immediately after a concussion, and this was correlated with lower obstacle clearances of the leading foot. Similar correlations could also be found between both leading and trailing foot avoidance and spatial orientation of attention in participants with concussion when attention was divided during obstacle crossing, and these relationships gradually weakened as recovery progressed. By contrast, spatial attention and obstacle clearance were not significantly correlated in control subjects. These findings indicate that patients with mTBI who display greater spatial attention deficits cross over the obstacle with a lower clearance than patients with less or without spatial attention deficits, leading to an increased probability of obstacle contact.

Research on attention and gait stability has suggested that the process of recovering gait stability requires attentional resources, but the effect of performing a secondary task on stability during obstacle avoidance is poorly understood. Using a dual-task paradigm, the present experiment investigated the extent to which young adults are able to respond to a secondary auditory Stroop task (requiring executive attentional network resources) concurrently with obstacle crossing during gait when compared with performing unobstructed walking or sitting (control task). Our results demonstrated that as the level of difficulty in the postural task increased, there was a significant reduction in verbal response time from congruent to incongruent conditions in the auditory Stroop task, but no differences in gait parameters, indicating that these postural tasks require attention, and that young adults use a strategy of modulating the auditory Stroop task performance while keeping stable gait performance under the dual-task situations. Our findings suggest the existence of a hierarchy of control within both postural task (obstacle avoidance requires the most information processing resources) and dual-task (with gait stability being a priority) conditions.

The purpose of this study was to examine the effects of concussion on gait stability when either a cognitive or motor perturbation is imposed. Fourteen individuals suffering from a grade II concussion and 14 matched controls performed a single task of level walking, a continuous sequential question and answer task while walking, and an obstacle-crossing task. Common gait spatial/temporal measurements, whole-body center of mass motion, and center of pressure trajectory were assessed. Concussed individuals adopted a more conservative strategy to maintain gait stability. Some measurements indicating conservative gait were seen during obstacle crossing, but this was most evident during the Q&A task. Concussed individuals also displayed signs of possible instability during the Q&A task. The question and answer task was most sensitive to distinguishing concussed individuals from healthy individuals, supporting the use of a similar dual-task modality in future testing after concussion to determine a proper time for return to activity.

We previously studied balance during lateral load transfers, but were left without explanation of why some individuals were successful in novel low friction conditions and others were not. Here, we retrospectively examined lower extremity kinematics between successful (SL) and unsuccessful (UL) groups to determine what characteristics may improve low friction performance. Success versus failure over a novel slippery surface was used to dichotomise 35 healthy working-age individuals into the two groups (SL and UL). Participants performed lateral load transfers over three sequential surface conditions: high friction, novel low friction, and practiced low friction. The UL group used a wide stance with rotation mostly at the hips during the high and novel low friction conditions. To successfully complete the practiced low friction task, they narrowed their stance and pivoted both feet and torso towards the direction of the load, similar to the SL group in all conditions. This successful kinematic method potentially results in reduced muscle demand throughout the task. Practitioner Summary: The reason for this paper is to retrospectively examine the different load transfer strategies that are used in a low friction lateral load transfer. We found stance width to be the major source of success, while sagittal plane motion was altered to potentially maintain balance.

Few studies have measured balance control during manual material handling, and even fewer with environmental cofactors. This study examined the effect of different surface frictions during a stationary manual material handling task. Thirty-six healthy participants completed 180° lateral transfer tasks of a load over high- and low-friction surfaces (μ = 0.86 and μ = 0.16, respectively). Balance measures, stance kinematics and lower extremity muscle activities were measured. Success during the novel slippery surface dichotomised our population, allowing us to investigate beneficial techniques to lateral load transfers over the slippery surface. Stance width reduction by 8 cm and 15° of additional external foot rotation towards the load were used to counter the imbalance created by the slippery surface. There was no clear alteration to lower extremity muscular control to adapt to a slippery surface. Changes in stance seemed to be used successfully to counter a slippery surface during lateral load transfers. STATEMENT OF RELEVANCE: Industries requiring manual material handling where slippery conditions are potentially present have a noticeable increase in injuries. This study suggests stance configuration, more so than any other measure of balance control, differentiates vulnerability to imbalance during material handling over a slippery surface.

The purpose of this study was to determine how two different types of concurrent tasks affect gait stability in patients with concussion and how balance is maintained. Fourteen individuals suffering from a grade II concussion and 14 matched controls performed a single task of level walking and two types of concurrent tasks during level walking: a discrete reaction time task and a continuous sequential question and answer task. Common gait spatial/temporal measurements, whole-body center of mass motion, and the center of pressure trajectory were recorded. Concussed individuals demonstrated differences in gait while performing single-task level walking and while being challenged with a more difficult secondary task compared to normal controls. Concussed individuals adopted a slower, more conservative gait strategy to maintain stability, but still exhibited signs of instability with center of mass deviations in the coronal plane increasing by 13% during the question and answer dual-task and 26% more than control subjects. Trends of attentional deficits were present with the question and answer task, while the reaction time task seemed to help concussed individuals be more alert to their gait and stability. Recommendations for a sensitive testing protocol of deficits following concussion are explained.

The purpose of this study was to examine how individuals modulate attention in a gait/cognition dual task during a 4-week period following a concussion. Ten individuals suffering from a grade 2 concussion and 10 matched controls performed a single task of level walking, a seated auditory Stroop task and a simultaneous auditory Stroop and walking task. Reaction time and accuracy were measured from the Stroop task. Dynamic balance control during gait was measured by the interaction (displacement and velocity) between the center of mass (CoM) and center of pressure (CoP) in the coronal and sagittal planes. Concussed individuals shifted from conservative control of balance (shorter separation between CoM and CoP) immediately after injury to normal balance control over 28 days post-injury. Immediately after injury, correlations analyses using each subject on each testing day as a data point showed that there was a spectrum of deficient performance among concussed individuals on the first testing day. Within a testing session, deficiencies in reaction time of processing involved in the Stroop task were commonly seen with reduce dynamic balance control. However, the prioritization was not always towards the same task between trials. There were no correlations in the control group. Information provided in this study would enhance our understanding of the interaction between attention and gait following concussion.

The purpose of this study was to longitudinally compare the sensitivity of previously documented paradigms for measuring balance control during gait following a concussion. We hypothesized that gait with a concurrent cognitive task would be most sensitive to the effects of concussion on dynamic balance control. Individuals with concussion (n = 30) and matched controls (n = 30) performed a single task of level walking, attention divided walking, and an obstacle-crossing task at two heights. Testing occurred four times post-injury. Balance control during gait was assessed with whole-body center of mass and center of pressure motion. The single-task level walking task did not result in any significant differences in balance control between individuals with concussion and control subjects. Within 48 hours post-injury, individuals with concussion walked slower and allowed less motion of their center of mass in the sagittal plane when attention was divided during walking, but there were no group differences by day 6 for this task. Group differences in balance control during obstacle crossing was unremarkable during the first two testing sessions, but by day 14 individuals with concussion displayed less mediolateral motion of their center of mass. Attention divided gait is able to better distinguish gait adaptations immediately following a concussion, but obstacle crossing can be used further along in the recovery process to detect new gait adaptations.