Search

Conditions have been identified in which phenolic aldoximes and ketoximes of the types used in commercial solvent extraction processes can be doubly deprotonated and generate polynuclear Cu complexes with lower extractant:Cu molar ratios than those found in commercial operations. Electrospray mass spectrometry has provided an insight into the solution speciation in extraction experiments and has identified conditions to allow isolation and characterization of polynuclear Cu-complexes. Elevation of pH is effective in enhancing the formation of trinuclear complexes containing planar {Cu 3 -μ 3 -O} 4+ or {Cu 3 -μ 3 -OH} 5+ units. DFT calculations suggest that such trinuclear complexes are more stable than other polynuclear species. Solid structures of complexes formed by a salicylaldoxime with a piperidino substituent ortho to the phenolic OH group ( L 9 H 2 ) contain two trinuclear units in a supramolecular assembly, {[Cu 3 OH( L 9 H) 3 (ClO 4 )](ClO 4 )} 2 , formed by H-bonding between the central {Cu 3 -μ 3 -OH} 5+ units and oxygen atoms in the ligands of an adjacent complex. Whilst the lower ligand:Cu molar ratios provide more efficient Cu-loading in solvent extraction processes, the requirement to raise the pH of the aqueous phase to achieve this will make it impractical in most commercial operations because extraction will be accompanied by the precipitation (as oxyhydroxides) of Fe(III) which is present in significant quantities in feed solutions generated by acid leaching of most Cu ores.

Direct isotope ratio analysis of solid uranium particulates on cotton swipes was achieved using a solution-based microextraction technique, coupled to a quadrupole inductively coupled plasma - mass spectrometer (ICP-MS). This microextraction-ICP-MS methodology provides rapid isotopic analysis which could be applicable to nuclear safeguards measurements. Particulates of uranyl nitrate hexahydrate (UO 2 (NO 3 ) 2 ·6H 2 O) and uranyl fluoride (UO 2 F 2 ) ranging from 6 μm to 40 μm in length were transferred to cotton swipes with a particle manipulator. The microextraction probe then delivers a 5% nitric acid (HNO 3 ) solvent onto the swipe surface to extract the uranium species. The extracted sample is then delivered to the ICP-MS for isotopic determination. The majority of uranium signal (∼99% and ∼94% for UO 2 (NO 3 ) 2 ·6H 2 O and UO 2 F 2 , respectively) was detected in the first 15 s extraction, while subsequent extractions on the same location had low or no U signal, suggesting near complete removal of the solid uranium compounds from the swipe surface. Ten samples (for each of the uranium compounds), were analyzed for their isotopic composition. For UO 2 (NO 3 ) 2 ·6H 2 O, the determined isotope ratios resulted in a % relative difference (% RD) from the referenced isotope ratios of 0.97, 1.0, and 7.3% for 234 U/ 238 U, 235 U/ 238 U, and 236 U/ 238 U, respectively. The % RD of the UO 2 F 2 isotope ratios were 1.9 and 0.60% for 234 U/ 238 U and 235 U/ 238 U, respectively. The preliminary limits of detection were determined to be 0.002, 0.4, and 60 pg for 234 U, 235 U and 238 U, respectively This work demonstrates that microextraction ICP-MS is a rapid and sensitive method that could directly determine uranium isotope ratios of UO 2 (NO 3 ) 2 ·6H 2 O and UO 2 F 2 particulates on cotton swipes., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The ability to directly measure uranium isotope ratios on environmental swipes has been achieved through a solution-based microextraction process and represents a significant advancement toward the development of a rapid method to analyze international nuclear safeguard samples. Here, a microextraction probe is lowered and sealed onto the swipe surface, and analytes within the sampling site (∼8 mm 2 ) are dissolved and extracted into a flowing solvent of 2% nitric acid (HNO 3 ). The mobilized species are subsequently directed into an inductively coupled plasma-mass spectrometer (ICP-MS) for accurate and precise isotope ratio determination. This work highlights the novelty of the sampling mechanism, particularly with the direct coupling of the microextraction probe to the ICP-MS and measurement of uranium isotope ratios. The preliminary method detection limit for the microextraction-ICP-MS method, utilizing a quadrupole-based MS, was determined to be ∼50 pg of 238 U. Additionally, precise and accurate isotope ratio measurements were achieved on uranium reference materials for both the major ( 235 U/ 238 U) and minor ( 234 U/ 238 U and 236 U/ 238 U) ratios. While the present work is focused on directly measuring uranium isotopic systems on swipe surfaces for nuclear safeguards and verification applications, the benefits would extend across many applications in which direct solid sampling is sought for elemental and isotopic analysis.

Presented here is a novel automated method for determining the trace element composition of bulk thorium by inductively coupled plasma-optical emission spectroscopy (ICP-OES). ICP-OES is a universal approach for measuring the trace elemental impurities present in actinide-rich materials; however, due to the emission rich spectrum of the actinide, a separation from the trace elements is warranted for spectrochemical analysis. Here, AG MP-1 ion exchange resin was utilized for retention of the Th matrix, while allowing the trace element impurities to be separated prior to subsequent analysis using ICP-OES. After demonstrating the separation on traditional gravity-driven columns, the methodology was transitioned to an automated platform for comparison. This automated platform utilizes syringe-driven sample and solvent flow and can collect the trace element and thorium fractions in separate locations. While reducing the sample size (500 µL, 1.5 mg of Th), maintaining the overall separation efficiency (recoveries >95%), and illustrating the sample throughput ability (n = 10+), this automated methodology could be readily adopted to nuclear facilities in which the determination of trace elemental impurities in Th samples is warranted.

This article presents the application of an automated online separation-direct analysis method, RAPID (Rapid Analysis of Post-Irradiation Debris), for the simultaneous measurement of both radioactive and stable fission isotopes from an irradiated highly-enriched uranium target. Developed for the measurement of the concentration and isotopic composition of over 40 elements down to the femtogram level, the RAPID method possesses the sensitivity, stability, and precision required to achieve accurate, low-level analyses of elements of non-natural origin. The isotopic compositions and concentrations of key fission elements cesium, strontium, yttrium, lanthanum, cerium, praseodymium, neodymium, promethium, and samarium have been measured repeatedly over a six-week period. The validity of these measurements was confirmed using ORIGEN (Oak Ridge Isotope GENeration), an isotope depletion and decay modeling software, to within 1-3%., (Published by Elsevier B.V.)

An automated separation-direct analysis scheme has been developed to determine both the concentration and isotopic composition of a suite of elements down to the low picogram level in a complex silicon-based matrix. With the ultimate goal of performing rapid analysis of materials with non-natural isotopic compositions, RAPID (Rapid Analysis of Post-Irradiation Debris) consists of a high-pressure ion chromatography system directly coupled to an inductively coupled plasma mass spectrometer. The RAPID method achieves matrix exclusion and direct online analysis of the elementally separated components, yielding precise isotopic compositions for up to 40 elements in less than one hour per sample. When combined with isotope dilution, this approach shows the potential to yield elemental concentrations with low uncertainties, providing a rapid analytical method that encompasses group I and II metals, transition metals, refractory metals, platinum group metals, lanthanides, and actinides. The method development, robustness, sensitivity, uncertainties, and potential applications in nuclear and environmental measurements will be discussed in this paper., (Copyright © 2018 Elsevier B.V. All rights reserved.)

NiSO(4) and FeSO(4) self-assemble with heteroditopic ligands (L) comprising 2,2'-bipyridine and o-phenylene-(bis)urea cation- and anion-binding sites, respectively, into [ML(3)SO(4)] (M = Ni(2+), Fe(2+)) triple-stranded ion-pair helicates and mesocates.

A series of 3-substituted salicylaldoximes has been used to demonstrate the importance of outer-sphere interactions on the efficacy of solvent extractants that are used to produce approximately one-quarter of the world's copper. The distribution coefficient for extraction of copper by 5-tert-butyl-3-X-salicylaldoximes (X = H, Me, (t)Bu, NO(2), Cl, Br, OMe) varies by more than two orders of magnitude. X-ray structure determinations of preorganized free ligand dimers (10 new structures are reported) indicate that substituents with a hydrogen-bond acceptor atom attached to the 3-carbon atom, ortho to the phenolic oxygen, buttress the intermolecular hydrogen bond from the oximic proton. Density functional theory calculations demonstrate that this hydrogen-bond buttressing is maintained in copper(II) complexes and contributes significantly to their relative stabilities in energy-minimized gas-phase structures. A remarkable correlation between the order of the calculated enthalpies of formation of the copper complexes in the gas phase and the observed strength of the ligands as copper solvent extractants is ascribed to the low solvation energies of species in the water-immiscible phase and/or the similarities of the solvation enthalpies of the preorganized ligand dimers and their copper(II) complexes.

Ligand-ligand interactions in the outer coordination sphere make an important contribution to the effects of 3-substituents on the stabilities of anionic Cu(II) salicylaldoximato complexes [CuL(L-H)](-). When substituents contain a different number of bonds the interpretation of CID tandem mass spectrometry must take into account the ability of ions to redistribute energy acquired in collisions within different numbers of vibrational modes.