Search

We have refined methods for biological specimen preparation and low-voltage backscattered electron imaging in the scanning electron microscope that allow for observation at continuous magnifications of ca. 130-70 000 X, and documentation of tissue and subcellular ultrastructure detail. The technique, based upon early work by Ogura & Hasegawa (1980), affords use of significantly larger sections from fixed and resin-embedded specimens than is possible with transmission electron microscopy while providing similar data. After microtomy, the sections, typically ca. 750 nm thick, were dried onto the surface of glass or silicon wafer and stained with heavy metals-the use of grids avoided. The glass/wafer support was then mounted onto standard scanning electron microscopy sample stubs, carbon-coated and imaged directly at an accelerating voltage of 5 kV, using either a yttrium aluminum garnet or ExB backscattered electron detector. Alternatively, the sections could be viewed first by light microscopy, for example to document signal from a fluorescent protein, and then by scanning electron microscopy to provide correlative light/electron microscope (CLEM) data. These methods provide unobstructed access to ultrastructure in the spatial context of a section ca. 7 × 10 mm in size, significantly larger than the typical 0.2 × 0.3 mm section used for conventional transmission electron microscopy imaging. Application of this approach was especially useful when the biology of interest was rare or difficult to find, e.g. a particular cell type, developmental stage, large organ, the interface between cells of interacting organisms, when contextual information within a large tissue was obligatory, or combinations of these factors. In addition, the methods were easily adapted for immunolocalizations., (© 2015 The Author. Journal of Microscopy published by John Wiley & Sons, Ltd on behalf of the Royal Microscopical Society.)

The ability of certain reptiles to adhere to vertical (and hang from horizontal) surfaces has been attributed to the presence of specialized adhesive setae on their feet. Structural and compositional studies of such adhesive setae will contribute significantly towards the design of biomimetic fibrillar adhesive materials. The results of electron microscopy analyses of the structure of such setae are presented, indicating their formation from aggregates of proteinaceous fibrils held together by a matrix and potentially surrounded by a limiting proteinaceous sheath. Microbeam X-ray diffraction analysis has shown conclusively that the only ordered protein constituent in these structures exhibits a diffraction pattern characteristic of beta-keratin. Raman microscopy of individual setae, however, clearly shows the presence of additional protein constituents, some of which may be identified as alpha-keratins. Electrophoretic analysis of solubilized setal proteins supports these conclusions, indicating the presence of a group of low-molecular-weight beta-keratins (14-20 kDa), together with alpha-keratins, and this interpretation is supported by immunological analyses.

Because of their extraordinary electronic and mechanical properties, carbon nanotubes have great potential as materials for applications ranging from molecular electronics to ultrasensitive biosensors. Biological molecules interacting with carbon nanotubes provide them with specific chemical handles that would make several of these applications possible. Here we use phage display to identify peptides with selective affinity for carbon nanotubes. Binding specificity has been confirmed by demonstrating direct attachment of nanotubes to phage and free peptides immobilized on microspheres. Consensus binding sequences show a motif rich in histidine and tryptophan, at specific locations. Our analysis of peptide conformations shows that the binding sequence is flexible and folds into a structure matching the geometry of carbon nanotubes. The hydrophobic structure of the peptide chains suggests that they act as symmetric detergents.

Rev is a 116 residue basic protein encoded by the genome of human immunodeficiency virus type 1 (HIV-1) that binds to multiple sites in the Rev response element (RRE) of viral mRNA transcripts in nuclei of host cells, leading to transport of incompletely spliced and unspliced viral mRNA to the cytoplasm of host cells in the latter phases of the HIV-1 life cycle. Rev is absolutely required for viral replication. Because Rev aggregates and fibrillizes in solution at concentrations required for crystal growth or liquid state NMR measurements, high-resolution structural characterization of full-length Rev has not been possible. Previously, circular dichroism studies have shown that approximately 50 % of the Rev sequence adopts helical secondary structure, predicted to correspond to a helix-loop-helix structural motif in the N-terminal half of the protein. We describe the application of solid-state NMR techniques to Rev fibrils as a means of obtaining site-specific, atomic-level structural constraints without requiring a high degree of solubility or crystallinity. Solid-state NMR measurements, using the double-quantum chemical shift anisotropy and constant-time double-quantum-filtered dipolar recoupling techniques, provide constraints on the phi and psi backbone dihedral angles at sites in which consecutive backbone carbonyl groups are labeled with (13)C. Quantitative analysis of the solid-state NMR data, by comparison with numerical simulations, indicates helical phi and psi angles at residues Leu13 and Val16 in the predicted helix 1 segment, and at residues Arg39, Arg 42, Arg43, and Arg44 in the predicted helix 2 segment. These data represent the first site-specific structural constraints from NMR spectroscopy on full-length Rev, and support the helix-loop-helix structural model for its N-terminal half.

Senile plaques associated with Alzheimer's disease contain deposits of fibrils formed by 39- to 43-residue beta-amyloid peptides with possible neurotoxic effects. X-ray diffraction measurements on oriented fibril bundles have indicated an extended beta-sheet structure for Alzheimer's beta-amyloid fibrils and other amyloid fibrils, but the supramolecular organization of the beta-sheets and other structural details are not well established because of the intrinsically noncrystalline, insoluble nature of amyloid fibrils. Here we report solid-state NMR measurements, using a multiple quantum (MQ) (13)C NMR technique, that probe the beta-sheet organization in fibrils formed by the full-length, 40-residue beta-amyloid peptide (Abeta(1-40)). Although an antiparallel beta-sheet organization often is assumed and is invoked in recent structural models for full-length beta-amyloid fibrils, the MQNMR data indicate an in-register, parallel organization. This work provides site-specific, atomic-level structural constraints on full-length beta-amyloid fibrils and applies MQNMR to a significant problem in structural biology.

The seven-residue peptide N-acetyl-Lys-Leu-Val-Phe-Phe-Ala-Glu-NH(2), called A beta(16-22) and representing residues 16-22 of the full-length beta-amyloid peptide associated with Alzheimer's disease, is shown by electron microscopy to form highly ordered fibrils upon incubation of aqueous solutions. X-ray powder diffraction and optical birefringence measurements confirm that these are amyloid fibrils. The peptide conformation and supramolecular organization in A beta(16-22) fibrils are investigated by solid state (13)C NMR measurements. Two-dimensional magic-angle spinning (2D MAS) exchange and constant-time double-quantum-filtered dipolar recoupling (CTDQFD) measurements indicate a beta-strand conformation of the peptide backbone at the central phenylalanine. One-dimensional and two-dimensional spectra of selectively and uniformly labeled samples exhibit (13)C NMR line widths of <2 ppm, demonstrating that the peptide, including amino acid side chains, has a well-ordered conformation in the fibrils. Two-dimensional (13)C-(13)C chemical shift correlation spectroscopy permits a nearly complete assignment of backbone and side chain (13)C NMR signals and indicates that the beta-strand conformation extends across the entire hydrophobic segment from Leu17 through Ala21. (13)C multiple-quantum (MQ) NMR and (13)C/(15)N rotational echo double-resonance (REDOR) measurements indicate an antiparallel organization of beta-sheets in the A beta(16-22) fibrils. These results suggest that the degree of structural order at the molecular level in amyloid fibrils can approach that in peptide or protein crystals, suggest how the supramolecular organization of beta-sheets in amyloid fibrils can be dependent on the peptide sequence, and illustrate the utility of solid state NMR measurements as probes of the molecular structure of amyloid fibrils. A beta(16-22) is among the shortest fibril-forming fragments of full-length beta-amyloid reported to date, and hence serves as a useful model system for physical studies of amyloid fibril formation.

Mapping single atoms in biological structures is now becoming within the reach of analytical electron microscopy. Electron energy-loss spectroscopy (EELS) in the field-emission scanning transmission electron microscope (STEM) provides a particularly high sensitivity for detecting the biologically important element, phosphorus. Imaging can be performed at low dose with dark-field STEM prior to analysis at high dose, so that structures of macromolecular assemblies can be correlated with the numbers of specific atoms that they contain. Measurements confirm theoretical predictions that single atom detection requires a nanometer-sized probe. Although phosphorus atoms may have moved several nanometers from their original positions by beam-induced structural degradation at the high required dose of approximately 10(9) e/nm2, damaged molecules are nevertheless stable enough to be analyzed at 1 or 2 nm resolution. Such analyses can only be achieved by means of spectrum-imaging with correction for specimen drift. Optimal strategies for mapping small numbers of phosphorus atoms have been investigated using well-characterized specimens of DNA plasmids and tobacco mosaic virus.

Proteinase 2 (Pr2) is a fungal (Metarhizium anisopliae) serine proteinase which has a tryptic specificity for basic residues and which may be involved in entomopathogenicity. Analytical and preparative isoelectric focusing methods were used to separate two trypsin components, produced during growth on cockroach cuticle, with isoelectric points of 4.4 (molecular mass, 30 kDa) and 4.9 (27 kDa). The catalytic properties of the proteases were analyzed by their kinetic constants and by a combination of two-dimensional gelatin-sodium dodecyl sulfate-polyacrylamide gel electrophoresis and enzyme overlay membranes. Both Pr2 isoforms preferentially cleave at the carboxyl sides of positively charged amino acids, preferring arginine; the pI 4.4 Pr2 isoform also possessed significant activity against lysine. Compared with the pathogen's subtilisin-like enzyme (Pr1), the pI 4.4 Pr2 isoform shows low activity against insoluble proteins in a host (Manduca sexta) cuticle. However, it degrades most cuticle proteins when they are solubilized, with high-molecular-weight basic proteins being preferentially hydrolyzed. Polyclonal antibodies raised against each Pr2 isoform were isotype specific. This allowed us to use ultrastructural immunocytochemistry to independently visualize each isoform during penetration of the host (M. sexta) cuticle. Both isoforms were secreted by infection structures (appressoria) on the cuticle surface and by the penetrant hyphae within the cuticle. The extracellular sheath, which is commonly observed around fungal cells, often contained Pr2 molecules. Intracellular labelling was sparse.

Extracellular chitinases have been suggested to be virulence factors in fungal entomopathogenicity. We employed isoelectric focusing and a set of three fluorescent substrates to investigate the numbers and types of chitinolytic enzymes produced by the entomopathogenic fungi Metarhizium anisopliae, Metarhizium flavoviride, and Beauveria bassiana. Each species produced a variety of N-acetyl-(beta)-d-glucosaminidases and endochitinases during growth in media containing insect cuticle. M. flavoviride also produced 1,4-(beta)-chitobiosidases. The endochitinases could be divided according to whether they had basic or acidic isoelectric points. In contrast to those of the other two species, the predominant endochitinases of M. anisopliae were acidic, with isoelectric points of about 4.8. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis resolved the acidic chitinases of M. anisopliae into two major bands (43.5 and 45 kDa) with identical N-terminal sequences (AGGYVNAVYFY TNGLYLSNYQPA) similar to an endochitinase from the mycoparasite Trichoderma harzianum. Use of polyclonal antibodies to the 45-kDa isoform and ultrastructural immunocytochemistry enabled us to visualize chitinase production during penetration of the host (Manduca sexta) cuticle. Chitinase was produced at very low levels by infection structures on the cuticle surface and during the initial penetration of the cuticle, but much greater levels of chitinase accumulated in zones of proteolytic degradation, which suggests that the release of the chitinase is dependent on the accessibility of its substrate.