Search

Linking the fundamental physics of band structure and scattering theory with macroscopic features such as measurable bulk thermoelectric transport properties is indispensable to a thorough understanding of transport phenomena and ensures more targeted and efficient experimental research. Here, we introduce SeeBand, a highly efficient and interactive fitting tool based on Boltzmann transport theory. A fully integrated user interface and visualization tool enable real-time comparison and connection between the electronic band structure (EBS) and microscopic transport properties. It allows simultaneous analysis of data for the Seebeck coefficient $S$, resistivity $\rho$ and Hall coefficient $R_\text{H}$ to identify suitable EBS models and extract the underlying microscopic material parameters and additional information from the model. Crucially, the EBS can be obtained by directly fitting the temperature-dependent properties of a single sample, which goes beyond previous approaches that look into doping dependencies. Finally, the combination of neural-network-assisted initial guesses and an efficient subsequent fitting routine allows for a rapid processing of big datasets, facilitating high-throughput analyses to identify underlying, yet undiscovered dependencies, thereby guiding material design.

Transverse thermoelectric power generation has emerged as a topic of immense interest in recent years owing to the orthogonal geometry which enables better scalability and fabrication of devices. Here, we investigate the thickness dependence of longitudinal and transverse responses in film-substrate systems i.e., the Seebeck coefficient, Hall coefficient, Nernst coefficient and anomalous Nernst coefficient in a unified and general manner based on the circuit model, which describes the system as the parallel setup. By solving the parallel circuit model, we show that the transverse responses exhibit a significant peak, indicating the importance of a cooperative effect between the film and the substrate, arising from circulating currents that occur in these multilayer systems in the presence of a temperature gradient. Finally, on the basis of realistic material parameters, we predict that the Nernst effect in bismuth thin films on doped silicon substrates is boosted to unprecedented values if the thickness ratio is tuned accordingly, motivating experimental validation., Comment: 11 pages, 6 figures

Magnetron sputtering inherently exhibits the advantage of dislodging particles from the target in a ratio equivalent to the target stoichiometry. Nevertheless, film compositions often deviate due to element-dependent scattering with the working gas, necessitating the adjustment of the sputtering process. In this work, we explore an unconventional approach of addressing this issue, involving the employment of an off-stoichiometric target. The required composition is obtained through an iterative process, which is demonstrated by Fe$_2$VAl and Fe$_2$V$_{0.9}$Ti$_{0.1}$Al films as case studies. Ultimately, the correct stoichiometry is obtained from Fe$_{1.86}$V$_{1.15}$Al$_{0.99}$ and Fe$_{1.88}$V$_{1.02}$Ti$_{0.13}$Al$_{0.97}$ targets, respectively. Despite the thermoelectric properties falling below expectations, mainly due to imperfect film crystallization, the strategy successfully achieved the desired stoichiometry, enabling accurate film synthesis without the need of advanced sputtering setups.

Thermoelectric (TE) materials are useful for applications such as waste heat harvesting or efficient and targeted cooling. While various strategies towards superior thermoelectrics through a reduction of the lattice thermal conductivity have been developed, a path to enhance the power factor is pressing. Here, we report large power factors up to 5 mW m$^{-1}$ K$^{-2}$ at room temperature in the kagome metal Ni$_3$In$_{1-x}$Sn$_x$. This system is predicted to feature almost dispersionless flat bands in conjunction with highly dispersive Dirac-like bands in its electronic structure around the Fermi energy $E_\text{F}$ [L. Ye et al., Nature Physics 1-5 (2024)]. Within this study, we experimentally and theoretically showcase that tuning this flat band precisely below $E_\text{F}$ by chemical doping $x$ boosts the Seebeck coefficient and power factor, as highly mobile charge carriers scatter into the flat-band states. Our work demonstrates the prospect of engineering extremely flat and highly dispersive bands towards the Fermi energy in kagome metals and introduces topological flat bands as a novel tuning knob for thermoelectrics.

Thermoelectric (TE) materials seamlessly convert thermal into electrical energy and vice versa, making them promising for applications such as power generation or cooling. Although historically the TE effect was first discovered in metals, state-of-the-art research mainly focuses on doped semiconductors with large figure of merit, $zT$, that determines the conversion efficiency of TE devices. While metallic alloys have superior functional properties, such as high ductility and mechanical strength, they have mostly been discarded from investigation in the past due to their small Seebeck effect. Here, we realize unprecedented TE performance in metals by tuning the energy-dependent electronic scattering. Based on our theoretical predictions, we identify binary NiAu alloys as promising candidate materials and experimentally discover colossal power factors up to 34 mWm$^{-1}$K$^{-2}$ (on average 30 mWm$^{-1}$K$^{-2}$ from 300 to 1100 K), which is more than twice larger than in any known bulk material above room temperature. This system reaches a $zT$ up to 0.5, setting a new world record value for metals. NiAu alloys are not only orders of magnitude more conductive than heavily doped semiconductors, but also have large Seebeck coefficients originating from an inherently different physical mechanism: within the Au s band conduction electrons are highly mobile while holes are scattered into more localized Ni d states, yielding a strongly energy-dependent carrier mobility. Our work challenges the common belief that good metals are bad thermoelectrics and presents an auspicious paradigm for achieving high TE performance in metallic alloys through engineering electron-hole selective s-d scattering.

The spatial arrangement of adsorbates deposited onto a clean surface in vacuum typically cannot be reversibly tuned. Here we use scanning tunneling microscopy to demonstrate that molecules deposited onto graphene field-effect transistors exhibit reversible, electrically-tunable surface concentration. Continuous gate-tunable control over the surface concentration of charged F4TCNQ molecules was achieved on a graphene FET at T = 4.5K. This capability enables precisely controlled impurity doping of graphene devices and also provides a new method for determining molecular energy level alignment based on the gate-dependence of molecular concentration. The gate-tunable molecular concentration can be explained by a dynamical molecular rearrangement process that reduces total electronic energy by maintaining Fermi level pinning in the device substrate. Molecular surface concentration in this case is fully determined by the device back-gate voltage, its geometric capacitance, and the energy difference between the graphene Dirac point and the molecular LUMO level.

We investigate the thermally-induced cyclization of 1,2 - bis(2 - phenylethynyl)benzene on Au(111) using scanning tunneling microscopy and computer simulations. Cyclization of sterically hindered enediynes is known to proceed via two competing mechanisms in solution: a classic C1 - C6 or a C1 - C5 cyclization pathway. On Au(111) we find that the C1 - C5 cyclization is suppressed and that the C1 - C6 cyclization yields a highly strained bicyclic olefin whose surface chemistry was hitherto unknown. The C1 - C6 product self-assembles into discrete non-covalently bound dimers on the surface. The reaction mechanism and driving forces behind non-covalent association are discussed in light of density functional theory calculations.

The photon-like electronic dispersion of graphene bestows its charge carriers with unusual confinement properties that depend strongly on the geometry and strength of the surrounding potential. Here we report bottom-up synthesis of atomically-precise one-dimensional (1D) arrays of point charges aimed at exploring supercritical confinement of carriers in graphene for new geometries. The arrays were synthesized by arranging F4TCNQ molecules into a 1D lattice on back-gated graphene devices, allowing precise tuning of both the molecular charge state and the array periodicity. Dilute arrays of ionized F4TCNQ molecules are seen to behave like isolated subcritical charges but dense arrays show emergent supercriticality. In contrast to compact supercritical clusters, extended 1D charge arrays exhibit both supercritical and subcritical characteristics and belong to a new physical regime termed frustrated supercritical collapse. Here carriers in the far-field are attracted by a supercritical charge distribution, but have their fall to the center frustrated by subcritical potentials in the near-field, similar to the trapping of light by a dense cluster of stars in general relativity.

Layered transition metal dichalcogenides (TMDs) are ideal systems for exploring the effects of dimensionality on correlated electronic phases such as charge density wave (CDW) order and superconductivity. In bulk NbSe2 a CDW sets in at TCDW = 33 K and superconductivity sets in at Tc = 7.2 K. Below Tc these electronic states coexist but their microscopic formation mechanisms remain controversial. Here we present an electronic characterization study of a single 2D layer of NbSe2 by means of low temperature scanning tunneling microscopy/spectroscopy (STM/STS), angle-resolved photoemission spectroscopy (ARPES), and electrical transport measurements. We demonstrate that 3x3 CDW order in NbSe2 remains intact in 2D. Superconductivity also still remains in the 2D limit, but its onset temperature is depressed to 1.9 K. Our STS measurements at 5 K reveal a CDW gap of {\Delta} = 4 meV at the Fermi energy, which is accessible via STS due to the removal of bands crossing the Fermi level for a single layer. Our observations are consistent with the simplified (compared to bulk) electronic structure of single-layer NbSe2, thus providing new insight into CDW formation and superconductivity in this model strongly-correlated system., Comment: Nature Physics (2015), DOI:10.1038/nphys3527

Despite the weak nature of interlayer forces in transition metal dichalcogenide (TMD) materials, their properties are highly dependent on the number of layers in the few-layer two-dimensional (2D) limit. Here, we present a combined scanning tunneling microscopy/spectroscopy and GW theoretical study of the electronic structure of high quality single- and few-layer MoSe2 grown on bilayer graphene. We find that the electronic (quasiparticle) bandgap, a fundamental parameter for transport and optical phenomena, decreases by nearly one electronvolt when going from one layer to three due to interlayer coupling and screening effects. Our results paint a clear picture of the evolution of the electronic wave function hybridization in the valleys of both the valence and conduction bands as the number of layers is changed. This demonstrates the importance of layer number and electron-electron interactions on van der Waals heterostructures, and helps to clarify how their electronic properties might be tuned in future 2D nanodevices.

When a slightly defective rutile TiO$_2$(110) surface is exposed to O$_2$ at elevated temperatures, the molecule dissociates at defects, filling O vacancies (\ov) and creating O adatoms (\oad) on {\tifc} rows. The adsorption of molecular O$_2$ at low temperatures has remained controversial. Low-Temperature Scanning Tunneling Microscopy (LT-STM) of O$_2$, dosed on TiO$_2$(110) at a sample temperature of $\approx$ 100 K and imaged at 17 K, shows a molecular precursor at \ov as a faint change in contrast. The adsorbed O$_2$ easily dissociates during the STM measurements, and formation of \oad's at both sides of the original \ov is observed., Comment: Submitted to Physical Review Letters. 4 pages, 2 figures