Search

Using a combination of molecular dynamics simulation, dialysis experiments, and electronic circular dichroism measurements, we studied the solvation thermodynamics of proteins in two osmolyte solutions, trimethylamine

With the rapid growth of synthetic messenger RNA (mRNA)-based therapeutics and vaccines, the development of analytical tools for characterization of long, complex RNAs has become essential. Tandem liquid chromatography–mass spectrometry (LC–MS/MS) permits direct assessment of the mRNA primary sequence and modifications thereof without conversion to cDNA or amplification. It relies upon digestion of mRNA with site-specific endoribonucleases to generate pools of short oligonucleotides that are then amenable to MS-based sequence analysis. Here, we showed that the uridine-specific human endoribonuclease hRNase 4 improves mRNA sequence coverage, in comparison with the benchmark enzyme RNase T1, by producing a larger population of uniquely mappable cleavage products. We deployed hRNase 4 to characterize mRNAs fully substituted with 1-methylpseudouridine (m1Ψ) or 5-methoxyuridine (mo5U), as well as mRNAs selectively depleted of uridine–two key strategies to reduce synthetic mRNA immunogenicity. Lastly, we demonstrated that hRNase 4 enables direct assessment of the 5′ cap incorporation into in vitro transcribed mRNA. Collectively, this study highlights the power of hRNase 4 to interrogate mRNA sequence, identity, and modifications by LC–MS/MS.

While a number of approaches have been developed to analyze liquid chromatography tandem mass spectrometry (LC-MS/MS) data obtained from modified oligonucleotides, the majority of these methods require analyzing every MS/MS spectrum de novo to sequence the oligonucleotide and place the modification. Spectral matching is an alternative approach for analyzing MS/MS data that is based on creating a library of annotated MS/MS spectra against which individual MS/MS data can be searched. Here, we have adapted the existing NIST spectral matching software to enable its use in the interpretation of MS/MS data obtained from modified oligonucleotides. In particular, we demonstrate the utility of this approach to identify specific post-transcriptionally modified nucleosides in particular transfer RNAs (tRNAs) obtained through a conventional RNA modification mapping experimental protocol. Spectral matching was found to be an efficient approach for screening for known modified tRNAs by using the experimental data as the library and previously annotated RNase T1 digestion products of tRNAs as the reference spectra. The utility of spectral matching for rapid analysis of multiple LC-MS/MS analyses was demonstrated by screening mutant strains of Streptococcus mutans to identify the enzyme(s) responsible for synthesizing the tRNA position 37 modification threonylcarbamoyladenosine (t6 A).

Characterization of mRNA sequences is a critical aspect of mRNA drug development and regulatory filing. Herein, we developed a novel bottom-up oligonucleotide sequence mapping workflow combining multiple endonucleases that cleave mRNA at different frequencies. RNase T1, colicin E5, and mazF were applied in parallel to provide complementary sequence coverage for large mRNAs. Combined use of multiple endonucleases resulted in significantly improved sequence coverage: greater than 70% sequence coverage was achieved on mRNAs near 3000 nucleotides long. Oligonucleotide mapping simulations with large human RNA databases demonstrate that the proposed workflow can positively identify a single correct sequence from hundreds of similarly sized sequences. In addition, the workflow is sensitive and specific enough to detect minor sequence impurities such as single nucleotide polymorphisms (SNPs) with a sensitivity of less than 1%. LC-MS/MS-based oligonucleotide sequence mapping can serve as an orthogonal sequence characterization method to techniques such as Sanger sequencing or next-generation sequencing (NGS), providing high-throughput sequence identification and sensitive impurity detection.

RNAs are post-transcriptionally modified by dedicated writer or eraser enzymes that add or remove specific modifications, respectively. Mass spectrometry (MS) of RNA is a useful tool to study the modification state of an oligonucleotide (ON) in a sensitive manner. Here, we developed an ion-pairing reagent free chromatography for positive ion detection of ONs by low- and high-resolution MS, which does not interfere with other types of small compound analyses done on the same instrument. We apply ON-MS to determine the ONs from an RNase T1 digest of in vitro transcribed tRNA, which are purified after ribozyme-fusion transcription by automated size exclusion chromatography. The thus produced tRNAValAAC is substrate of the human tRNA ADAT2/3 enzyme and we confirm the deamination of adenosine to inosine and the formation of tRNAValIACin vitro by ON-MS. Furthermore, low resolution ON-MS is used to monitor the demethylation of ONs containing 1-methyladenosine by bacterial AlkB in vitro. The power of high-resolution ON-MS is demonstrated by the detection and mapping of modified ONs from native total tRNA digested with RNase T1. Overall, we present an oligonucleotide MS method which is broadly applicable to monitor in vitro RNA (de-)modification processes and native RNA.

Human cyclophilin D is a mitochondrial peptidyl-prolyl isomerase that plays a role in regulating the opening of the mitochondrial permeability transition pore. It is considered a viable and promising molecular target for the treatment of diseases for which disease development is associated with pore opening, e.g., Alzheimer's disease or ischemia/reperfusion injury. Currently available and widely used

RNA:DNA hybrids are important intermediates in cellular processes. Smolka et al. establish controls to test the specificity of the S9.6 anti-RNA:DNA hybrid antibody in imaging approaches. They found that S9.6 immunofluorescence signal derives primarily from ribosomal RNA, not RNA:DNA hybrids., The S9.6 antibody is broadly used to detect RNA:DNA hybrids but has significant affinity for double-stranded RNA. The impact of this off-target RNA binding activity has not been thoroughly investigated, especially in the context of immunofluorescence microscopy. We report that S9.6 immunofluorescence signal observed in fixed human cells arises predominantly from ribosomal RNA, not RNA:DNA hybrids. S9.6 staining was unchanged by pretreatment with the RNA:DNA hybrid–specific nuclease RNase H1, despite verification in situ that S9.6 recognized RNA:DNA hybrids and that RNase H1 was active. S9.6 staining was, however, significantly sensitive to RNase T1, which specifically degrades RNA. Additional imaging and biochemical data indicate that the prominent cytoplasmic and nucleolar S9.6 signal primarily derives from ribosomal RNA. Importantly, genome-wide maps obtained by DNA sequencing after S9.6-mediated DNA:RNA immunoprecipitation (DRIP) are RNase H1 sensitive and RNase T1 insensitive. Altogether, these data demonstrate that imaging using S9.6 is subject to pervasive artifacts without pretreatments and controls that mitigate its promiscuous recognition of cellular RNAs.

Liquid chromatography tandem mass spectrometry (LC-MS/MS) has proven to be a powerful analytical tool for the characterization of modified ribonucleic acids (RNAs). The typical approach for analyzing modified nucleosides within RNA sequences by mass spectrometry involves ribonuclease digestion followed by LC-MS/MS analysis and data interpretation. Here we describe a new software tool, RNAModMapper (RAMM), to assist in the interpretation of LC-MS/MS data. RAMM is a stand-alone package that requires user-submitted DNA or RNA sequences to create a local database against which collision-induced dissociation (CID) data of modified oligonucleotides can be compared. RAMM can interpret MS/MS data containing modified nucleosides in two modes: fixed and variable. In addition, RAMM can also utilize interpreted MS/MS data for RNA modification mapping back against the input sequence(s). The applicability of RAMM was first tested using total tRNA isolated from Escherichia coli. It was then applied to map modifications found in 16S and 23S rRNA from Streptomyces griseus.

Even with the advent of high throughput methods to detect modified ribonucleic acids (RNAs), mass spectrometry remains a reliable method to detect, characterize, and place post-transcriptional modifications within an RNA sequence. Here we have developed a stable isotope labeling comparative analysis of RNA digests (SIL-CARD) approach, which improves upon the original 18O/16O labeling CARD method. Like the original, SIL-CARD allows sequence or modification information from a previously uncharacterized in vivo RNA sample to be obtained by direct comparison with a reference RNA, the sequence of which is known. This reference is in vitro transcribed using a 13C/15N isotopically enriched nucleoside triphosphate (NTP). The two RNAs are digested with an endonuclease, the specificity of which matches the labeled NTP used for transcription. As proof of concept, several transfer RNAs (tRNAs) were characterized by SIL-CARD, where labeled guanosine triphosphate was used for the reference in vitro transcription. RNase T1 digestion products from the in vitro transcript will be 15 Da higher in mass than the same digestion products from the in vivo tRNA that are unmodified, leading to a doublet in the mass spectrum. Singlets, rather than doublets, arise if a sequence variation or a post-transcriptional modification is present that results in a relative mass shift different from 15 Da. Moreover, the use of the in vitro synthesized tRNA transcript allows for quantitative measurement of RNA abundance. Overall, SIL-CARD simplifies data analysis and enhances quantitative RNA modification mapping by mass spectrometry.

Immunotoxins are chimeric molecules that combine the specificity of an antibody to recognize and bind tumor antigens with the potency of the enzymatic activity of a toxin, thus, promoting the death of target cells. Among them, RNases-based immunotoxins have arisen as promising antitumor therapeutic agents. In this work, we describe the production and purification of two new immunoconjugates, based on RNase T1 and the fungal ribotoxin &alpha, sarcin, with optimized properties for tumor treatment due to the inclusion of a furin cleavage site. Circular dichroism spectroscopy, ribonucleolytic activity studies, flow cytometry, fluorescence microscopy, and cell viability assays were carried out for structural and in vitro functional characterization. Our results confirm the enhanced antitumor efficiency showed by these furin-immunotoxin variants as a result of an improved release of their toxic domain to the cytosol, favoring the accessibility of both ribonucleases to their substrates. Overall, these results represent a step forward in the design of immunotoxins with optimized properties for potential therapeutic application in vivo.

In this protocol a randomly labeled single-stranded RNA probe is prepared and then hybridized to a population of mRNA molecules. The RNAs are digested with a mixture of RNase A and RNase T1. The hybrid molecules, which are resistant to the RNases, are separated and analyzed using gel electrophoresis and radiography.

Proteins that are modified by chemical conjugation require at least two separate purification processes. First the bulk protein is purified, and then after chemical conjugation, a second purification process is required to obtain the modified protein. In an effort to develop new enabling technologies to integrate bioprocessing and protein modification, we describe the use of disulfide-bridging conjugation to conduct PEGylation during protein refolding. Preliminary experiments using a PEG-mono-sulfone reagent with partially unfolded leptin and unfolded RNAse T1 indicated that the cysteine thiols underwent disulfide-bridging conjugation to give the PEGylated proteins. Interferon-β1b (IFN-β1b) was then expressed in E.coli as inclusion bodies and found to undergo disulfide bridging-conjugation during refolding. The PEG-IFN-β1b was isolated by ion-exchange chromatography and displayed in vitro biological activity. In the absence of the PEGylation reagent, IFN-β1b refolding was less efficient and yielded protein aggregates. No PEGylation was observed if the cysteines on IFN-β1b were first modified with iodoacetamide prior to refolding. Our results demonstrate that the simultaneous refolding and disulfide bridging PEGylation of proteins could be a useful strategy in the development of affordable modified protein therapeutics.

Research into post-transcriptional processing and modification of RNA continues to speed forward, as their ever-emerging role in the regulation of gene expression in biological systems continues to unravel. Liquid chromatography tandem mass spectrometry (LC-MS/MS) has proven for over two decades to be a powerful ally in the elucidation of RNA modification identity and location, but the technique has not proceeded without its own unique technical challenges. The throughput of LC-MS/MS modification mapping experiments continues to be impeded by tedious and time-consuming spectral interpretation, particularly during for the analysis of complex RNA samples. RNAModMapper was recently developed as a tool to improve the interpretation and annotation of LC-MS/MS data sets from samples containing post-transcriptionally modified RNAs. Here, we delve deeper into the methodology and practice of RNAModMapper to provide greater insight into its utility, and remaining hurdles, in current RNA modification mapping experiments.

Understanding how oxidatively damaged RNA interacts with ribonucleases is important because of its proposed role in the development and progression of disease. Thus, understanding structural aspects of RNA containing lesions generated under oxidative stress, as well as its interactions with other biopolymers, is fundamental. We explored the reactivity of RNase A, RNase T

Preferential solvation is a fundamental parameter for the interpretation of solubility and solute structural stability. The molecular basis for solute-solvent interactions can be obtained through distribution functions, and the thermodynamic connection to experimental data depends on the computation of distribution integrals, specically Kirkwood-Bu integrals for the determination of preferential interaction or exclusion. Standard radial distribution function functions, however, are not convenient for the study of the solvation of complex, non-spherical solutes, as proteins structures. Here we show that minimum-distance distribution functions can be used to compute KB integrals while at the same time providing a rich view of solute-solvent interactions at the molecular level. We compute preferential solvation parameters for Ribonuclease T1 in aqueous solutions of urea and trimethylamine N-oxide (TMAO), and show that, while macroscopic solvation shows that urea is preferentially bound to the protein surface and TMAO is preferentially excluded, both display specic density augmentations at the protein surface. Therefore, direct protein-osmolyte interactions can play a role in the stability and activity of the protein even for preferentially hydrated systems. The generality of the distribution function and its natural connection to thermodynamic data suggests that it will be useful in general for the study of solvation in mixtures of structurally complex solutes and solvents.

Extracellular low-molecular weight guanyl-preferring ribonucleases (LMW RNases) of Bacillus sp. comprise a group of hydrolytic enzymes that share highly similar structural and catalytic characteristics with barnase, a ribonuclease from Bacillus amyloliquefaciens, and binase, a ribonuclease from Bacillus intermedius. Although the physical–chemical and catalytic properties of Bacillus guanyl-preferring ribonucleases are very similar, there is considerably more variation in the environmental conditions that lead to the induction of the genes encoding these RNases. Based on structural differences of their genes the guanyl-preferring ribonucleases have been sub-divided into binase-like and barnase-like groups. Here we show the ability of the key regulator of phosphate deficiency response, PhoP, to direct the transcription of the binase-like RNases but not barnase-like RNases. These results, together with our demonstration that binase-like RNases are induced in response to phosphate starvation, allow us to categorise this group of ribonucleases as new members of Bacillus PhoP regulon. In contrast, the barnase-like ribonucleases are relatively insensitive to the phosphate concentration and the environmental conditions that are responsible for their induction, and the regulatory elements involved, are currently unknown.

The 3'-polyadenosine (poly A) tail of in vitro transcribed (IVT) mRNA was studied using liquid chromatography coupled to mass spectrometry (LC-MS). Poly A tails were cleaved from the mRNA using ribonuclease T1 followed by isolation with dT magnetic beads. Extracted tails were then analyzed by LC-MS which provided tail length information at single-nucleotide resolution. A 2100-nt mRNA with plasmid-encoded poly A tail lengths of either 27, 64, 100, or 117 nucleotides was used for these studies as enzymatically added poly A tails showed significant length heterogeneity. The number of As observed in the tails closely matched Sanger sequencing results of the DNA template, and even minor plasmid populations with sequence variations were detected. When the plasmid sequence contained a discreet number of poly As in the tail, analysis revealed a distribution that included tails longer than the encoded tail lengths. These observations were consistent with transcriptional slippage of T7 RNAP taking place within a poly A sequence. The type of RNAP did not alter the observed tail distribution, and comparison of T3, T7, and SP6 showed all three RNAPs produced equivalent tail length distributions. The addition of a sequence at the 3' end of the poly A tail did, however, produce narrower tail length distributions which supports a previously described model of slippage where the 3' end can be locked in place by having a G or C after the poly nucleotide region. Graphical abstract Determination of mRNA poly A tail length using magnetic beads and LC-MS.

Recently, we developed a method for modified ribonucleic acid (RNA) analysis based on the comparative analysis of RNA digests (CARD). Within this CARD approach, sequence or modification differences between two samples are identified through differential isotopic labeling of two samples. Components present in both samples will each be labeled, yielding doublets in the CARD mass spectrum. Components unique to only one sample should be detected as singlets. A limitation of the prior singlet identification strategy occurs when the two samples contain components of unique sequence but identical base composition. At the first stage of mass spectrometry, these sequence isomers cannot be differentiated and would appear as doublets rather than singlets. However, underlying sequence differences should be detectable by collision-induced dissociation tandem mass spectrometry (CID MS/MS), as y-type product ions will retain the original enzymatically incorporated isotope label. Here, we determine appropriate instrumental conditions that enable CID MS/MS of isotopically labeled ribonuclease T1 (RNase T1) digestion products such that the original isotope label is maintained in the product ion mass spectrum. Next, we demonstrate how y-type product ions can be used to differentiate singlets and doublets from isomer sequences. We were then able to extend the utility of this approach by using CID MS/MS for the confirmation of an expected RNase T1 digestion product within the CARD analysis of an Escherichia coli mutant strain even in the presence of interfering and overlapping digestion products from other transfer RNAs. Copyright © 2014 John Wiley & Sons, Ltd.

Our goal was to gain a better understanding of the contribution of the burial of polar groups and their hydrogen bonds to the conformational stability of proteins. We measured the change in stability, Δ(ΔG), for a series of hydrogen bonding mutants in four proteins: villin headpiece subdomain (VHP) containing 36 residues, a surface protein from Borrelia burgdorferi (VlsE) containing 341 residues, and two proteins previously studied in our laboratory, ribonucleases Sa (RNase Sa) and T1 (RNase T1). Crystal structures were determined for three of the hydrogen bonding mutants of RNase Sa: S24A, Y51F, and T95A. The structures are very similar to wild type RNase Sa and the hydrogen bonding partners form intermolecular hydrogen bonds to water in all three mutants. We compare our results with previous studies of similar mutants in other proteins and reach the following conclusions. (1) Hydrogen bonds contribute favorably to protein stability. (2) The contribution of hydrogen bonds to protein stability is strongly context dependent. (3) Hydrogen bonds by side chains and peptide groups make similar contributions to protein stability. (4) Polar group burial can make a favorable contribution to protein stability even if the polar groups are not hydrogen bonded. (5) The contribution of hydrogen bonds to protein stability is similar for VHP, a small protein, and VlsE, a large protein.

Recent progress in the synthesis of nucleotides from prebiotically plausible precursors has opened up new ways to explain the origin of genetic matter. Mechanisms for the polymerization of nucleotides without the help of catalysts are, however, rare. Complementary to the experiments done by Costanzo et al., we found that drying 3',5'-cyclic GMP leads to poly-G RNA strands with lengths of up to 40 nucleotides. We also show that the polymerization to long RNA strands is considerably more efficient under dry conditions than for cGMP polymerization in water. The length depends on the incubation time of dry nucleotides at temperatures of 40-80 °C. No enzymes or other catalysts are needed for successful polymerization.

The length of the CAG repeat region in the huntingtin messenger RNA is predictive of Huntington’s disease. Structural studies of CAG repeat-containing RNAs suggest that these sequences form simple hairpin structures; however, in the context of the full-length huntingtin mRNA, CAG repeats may form complex structures that could be targeted for therapeutic intervention. We examined the structures of transcripts spanning the first exon of the huntingtin mRNA with both healthy and disease-prone repeat lengths. In transcripts with 17 to 70 repeats, the CAG sequences base paired extensively with bases in the 5′ UTR and with a conserved region downstream of the CCG repeat region. In huntingtin transcripts with healthy numbers of repeats, the previously observed CAG hairpin was either absent or short. In contrast, in transcripts with disease-associated numbers of repeats, a CAG hairpin was present and extended from a three-helix junction. Our findings demonstrate the profound importance of sequence context in RNA folding and identify specific structural differences between healthy and disease-inducing huntingtin alleles that may be targets for therapeutic intervention.

RNase Po1 is a guanylic acid-specific ribonuclease (a RNase T1 family RNase) from Pleurotus ostreatus. We determined the cDNA sequence encoding RNase Po1 and expressed RNase Po1 in Escherichia coli. A comparison of the enzymatic properties of RNase Po1 and RNase T1 indicated that the optimum temperature for RNase Po1 activity was 20 °C higher than that for RNase T1. An MTT assay indicated that RNase Po1 inhibits the proliferation of human neuroblastoma cells (IMR-32 and SK-N-SH) and human leukemia cells (Jurkat and HL-60). Furthermore, Hoechst 33342 staining showed morphological changes in HL-60 cells due to RNase Po1, and flow cytometry indicated the appearance of a sub-G1 cell population. The extent of these changes was dependent on the concentration of RNase Pol. We suggest that RNase Po1 induces apoptosis in tumor cells.

We have developed a new methodology that determines protein structures using small-angle X-ray scattering (SAXS) data. The current bottlenecks in determining the protein structures require a new strategy using the simple design of an experiment, and SAXS is suitable for this purpose in spite of its low information content. First we demonstrated that SAXS constraints work additively to NMR-derived information in calculating structures. Next, structure calculations for nine proteins taking different folds were performed using the SAXS constraints combined with the NMR-derived distance restraints for local geometry such as secondary structures or those for tertiary structure. The results show that the SAXS constraints complemented the tertiary-structural information for all the proteins, and that accuracy of the structures thus obtained with SAXS constraints and local geometrical restraints ranged from 1.85 to 4.33Å. Based on these results, we were able to construct a coarse-grained protein model at amino acid residue resolution.

A group of enzymes, mostly hydrolases or certain transferases, utilize one or a few side-chain carboxyl groups of Asp and/or Glu as part of the catalytic machinery at their active sites. This review follows mainly the trail of studies performed by the author and his colleagues on the structure and function of such enzymes, starting from ribonuclease T1, then extending to three major types of carboxyl peptidases including aspartic peptidases, glutamic peptidases and serine-carboxyl peptidases.

This paper describes the modern enzymology in Japanese bioindustries. The invention of Takadiastase by Jokiti Takamine in 1894 has revolutionized the world of industrial enzyme production by fermentation. In 1949, a new γ-amylase (glucan 1,4-α-glucosidase, EC 3.2.1.3) from A. luchuensis (formerly designated as A. awamori), was found by Kitahara. RNase T1 (guanyloribonuclease, EC 3.1.27.3) was discovered by Sato and Egami. Ando discovered Aspergillus nuclease S1 (single-stranded nucleate endonuclease, EC 3.1.30.1). Aspergillopepsin I (EC 3.4.23.18) from A. tubingensis (formerly designated as A. saitoi) activates trypsinogen to trypsin. Shintani et al. demonstrated Asp76 of aspergillopepsin I as the binding site for the basic substrate, trypsinogen. The new oligosaccharide moieties Man10GlcNAc2 and Man11GlcNAc2 were identified with α-1,2-mannosidase (EC 3.2.1.113) from A. tubingensis. A yeast mutant compatible of producing Man5GlcNAc2 human compatible sugar chains on glycoproteins was constructed. The acid activation of protyrosinase from A. oryzae at pH 3.0 was resolved. The hyper-protein production system of glucoamylase was established in a submerged culture.

Slow protein folding processes during which kinetic folding intermediates occur for an extended time can lead to aggregation and dysfunction in living cells. Therefore, protein folding helpers have evolved, which prevent proteins from aggregation and/or speed up folding processes. In this study, we present the structural characterization of a long-living transient folding intermediate of RNase T1 (S54G/P55N) by time-resolved NMR spectroscopy. NMR resonances of this kinetic folding intermediate could be assigned mainly by a real-time 3D BEST-HNCA. These assignments were the basis to investigate the interaction sites between the protein folding helper enzyme SlyD(1-165) (SlyD*) from Escherichia coli (E. coli) and this kinetic intermediate at a residue resolution. Thus, we investigated the Michaelis-Menten complex of this enzyme reaction, because the NMR data acquisition was performed during the actual catalysis. The interaction surface of the transient folding intermediate is restricted to a region around the peptidyl-prolyl bond (Y38-P39), whose isomerization is catalyzed by SlyD*. The interaction surface regarding SlyD* extends from specific amino acids of the FKBP domain forming the peptidyl-prolyl cis/trans-isomerase active site to almost the entire IF domain. This illustrates an effective interplay between the two functional domains of SlyD* to facilitate protein folding catalysis. published

Cathodal iontophoresis of anionic macromolecules has been considered a major challenge owing to (i) the presence of a negative charge on the skin under physiological conditions and (ii) the electroosmotic solvent flow in the (opposite) anode-to-cathode direction. Moreover, electroosmosis, and not electromigration, was considered as the likely electrotransport mechanism for high molecular weight cations. However, it was recently shown that electromigration governed anodal iontophoretic transport of Cytochrome c (12.4 kDa) and Ribonuclease A (RNAse A; 13.6 kDa). Thus, the objective of this study was to investigate the feasibility of iontophoresing a negatively charged protein, the enzyme Ribonuclease T1 (RNAse T1, 11.1 kDa), from the cathode across intact skin. Cumulative permeation and skin deposition of RNAse T1 were investigated as a function of current density (0.15, 0.3 and 0.5 mA/cm(2) applied for 8h) using porcine ear skin and quantified by an enzymatic activity assay. Although RNAse T1 permeation was dependent upon current density (22.41 ± 8.10, 76.41 ± 56.98 and 142.19 ± 62.23μg/cm(2), respectively), no such relationship was observed with respect to skin deposition (9.78 ± 2.39, 7.76 ± 4.34 and 8.70 ± 2.94 μg/cm(2), respectively). MALDI-TOF spectra and the activity assay confirmed that RNAse T1 retained structural integrity and enzymatic function post-iontophoresis. Acetaminophen iontophoresis demonstrated the anode-to-cathode directionality of electroosmotic solvent flow confirming that RNAse T1 electrotransport was due entirely to electromigration. Interestingly, despite its lower net charge and higher molecular weight, electromigration of cationic Ribonuclease A was superior to that of RNAse T1 after iontophoresis at 0.5 mA/cm(2) for 8h. These results provide further evidence that charge to mass ratio and hence electric mobility might not alone be sufficient to predict protein electrotransport across the skin; three dimensional structures and the spatial distribution of physicochemical properties must also be considered. The skin extraction data suggest that negatively charged molecules may have fewer potential binding sites in the skin than their cationic counterparts. This was supported by confocal laser scanning microscopy images which showed that whereas fluorescence from RNAse A was distributed throughout the epidermis and dermis, RNAse T1 appeared to be bound to the epidermis alone. In conclusion, this is the first report demonstrating successful non-invasive cathodal iontophoresis of a negatively charged functional protein (RNAse T1) across intact skin.

Our goal was to gain a better understanding of the contribution of hydrophobic interactions to protein stability. We measured the change in conformational stability, Δ(ΔG), for hydrophobic mutants of four proteins: villin headpiece subdomain (VHP) with 36 residues, a surface protein from Borrelia burgdorferi (VlsE) with 341 residues, and two proteins previously studied in our laboratory, ribonucleases Sa and T1. We compared our results with those of previous studies and reached the following conclusions: (1) Hydrophobic interactions contribute less to the stability of a small protein, VHP (0.6±0.3 kcal/mol per -CH(2)- group), than to the stability of a large protein, VlsE (1.6±0.3 kcal/mol per -CH(2)- group). (2) Hydrophobic interactions make the major contribution to the stability of VHP (40 kcal/mol) and the major contributors are (in kilocalories per mole) Phe18 (3.9), Met13 (3.1), Phe7 (2.9), Phe11 (2.7), and Leu21 (2.7). (3) Based on the Δ(ΔG) values for 148 hydrophobic mutants in 13 proteins, burying a -CH(2)- group on folding contributes, on average, 1.1±0.5 kcal/mol to protein stability. (4) The experimental Δ(ΔG) values for aliphatic side chains (Ala, Val, Ile, and Leu) are in good agreement with their ΔG(tr) values from water to cyclohexane. (5) For 22 proteins with 36 to 534 residues, hydrophobic interactions contribute 60±4% and hydrogen bonds contribute 40±4% to protein stability. (6) Conformational entropy contributes about 2.4 kcal/mol per residue to protein instability. The globular conformation of proteins is stabilized predominantly by hydrophobic interactions.

The pSSVx from Sulfolobus islandicus, strain REY15/4, is a hybrid between a plasmid and a fusellovirus. A systematic study previously performed revealed the presence of nine major transcripts, the expression of which was differentially and temporally regulated over the growth cycle of S. islandicus. In this study, two new transcripts were identified. Then, 3' termini of all the RNAs were mapped using adaptor RT-PCR and RNase protection assays, and termination/arrest positions were identified for each transcript. The majority of the identified ending positions were located in the close vicinity of a T-rich sequence and this was consistent with termination signals identifiable for most of archaeal genes. Furthermore, termination also occurred at locations where a T-track sequence was absent but a stem-loop structure could be formed. We propose that an alternative mechanism based on secondary RNA structures and counter-transcripts might be responsible for the transcription termination at these T-track-minus loci in the closely spaced pSSVx genes.

Supramolecular assembly is a powerful strategy used by nature to build nanoscale architectures with predefined sizes and shapes. With synthetic systems, however, numerous challenges remain to be solved before precise control over the synthesis, folding and assembly of rationally designed three-dimensional nano-objects made of RNA can be achieved. Here, using the transfer RNA molecule as a structural building block, we report the design, efficient synthesis and structural characterization of stable, modular three-dimensional particles adopting the polyhedral geometry of a non-uniform square antiprism. The spatial control within the final architecture allows the precise positioning and encapsulation of proteins. This work demonstrates that a remarkable degree of structural control can be achieved with RNA structural motifs for the construction of thermostable three-dimensional nano-architectures that do not rely on helix bundles or tensegrity. RNA three-dimensional particles could potentially be used as carriers or scaffolds in nanomedicine and synthetic biology. Whereas synthetic DNA nanostructures are widely studied, the use of RNA as a structural building block is much less common. Now, it has been shown that tRNA molecules can be designed to assemble into a rigid and thermally stable square antiprism structure that may prove useful for delivery applications inside cells.

Because of their central importance for understanding enzymatic mechanisms, pK(a) values are of great interest in biochemical research. It is common practice to determine pK(a) values of amino acid residues in proteins from NMR or FTIR titration curves by determining the pH at which the protonation probability is 50%. The pH dependence of the free energy required to protonate this residue is then determined from the linear relationship DeltaG(prot) = RT ln 10 (pH-pK(a)), where R is the gas constant and T the absolute temperature. However, this approach neglects that there can be important electrostatic interactions in the proteins that can shift the protonation energy. Even if the titration curves seem to have a standard sigmoidal shape, the protonation energy of an individual site in a protein may depend nonlinearly on pH. To account for this nonlinear dependence, we show that it is required to introduce pK(a) values for individual sites in proteins that depend on pH. Two different definitions are discussed. One definition is based on a rearranged Henderson-Hasselbalch equation, and the other definition is based on an equation that was used by Tanford and Roxby to approximate titration curves of proteins. In the limiting case of weak interactions, the two definitions lead to nearly the same pK(a) value. We discuss how these two differently defined pK(a) values are related to the free energy change required to protonate a site. Using individual site pK(a) values, we demonstrate on simple model systems that the interactions between protonatable residues in proteins can help to maintain the energy required to protonate a site in the protein nearly constant over a wide pH range. We show with the example of RNase T1 that such a mechanism to keep the protonation energy constant is used in enzymes. The pH dependence of pK(a) values may be an important concept in enzyme catalysis. Neglecting this concept, important features of enzymes may be missed, and the enzymatic mechanism may not be fully understood.

In this study, we investigated the ability of the fungus Neurospora crassa to produce and secrete two ribonucleases: the heterologous bovine RNase A and the endogenous RNase N(1). A set of expression vectors was constructed, each consisting of an RNase A open reading frame under the control of a specific promoter and each with a specific terminator. N. crassa transformants were analyzed at the transcriptional and protein levels. Irrespective of the promoter used, all transformants showed an RNase A-specific transcript in northern hybridization, but transcriptional strengths differed significantly. The strongest transcription was detected in transformants under the control of the cfp promoter. Western blot analysis and ELISA assays of selected transformants showed an effective secretion up to 356 ng/mL of recombinant RNase A protein. However, the highest ribonuclease activity could be detected in transformants carrying the endogenous RNase N(1) under the control of the ccg1 promoter. Expression and secretion of RNase N(1) thus represent an alternative to recombinant expression of RNase A protein. In conclusion, we have created a viable expression system for expression of homologous and heterologous proteins in N. crassa.