Search

The objective of this study was to optimize of ratio oil type, ratio oil to methanol and catalyst concentration. The optimization was used Central Composite Design (CCD). Biodiesel was produced with multi stock oil as feed and conducted in direct ultrasonic radiation. Biosonic equiped with ultrasonic generator with a frequency of 28 kHz. Biodiesel produced at a pressure of 1 atm, reaction time of 60 min and temperature 60 ° C. The optimum conditions of volume ratio for Palm and Coconut oil 4:1, KOH catalyst concentration 0.3% and methanol to oil mole ratio 7:1. Biodiesel yield was determined under this condition and obtained 81.105%.

Keterbatasan solar sebagai sumber energi bahan bakunya tidak dapat diperbaharui menuntut adanya bahan baku alternatif yang dapat diperbaharui dan ramah lingkungan untuk pembuatan biodiesel. Reaksi utama produksi biodiesel adalah esterifikasi dan transestirifikasi yang berlangsung lambat dan membutuhkan banyak katalis dan alkohol. Reaksi yang terjadi belum sempurna dan belum memenuhi standar SNI dan ASTM. Untuk memperbaiki mutu biodiesel serta menghasilkan yield maksimal, maka dilakukan blending bahan baku antara minyak kelapa sawit dan minyak kelapa dan dengan bantuan gelombang ultrasonic. Penelitian ini bertujuan untuk mempelajari pengaruh variabel perbandingan volume minyak kelapa sawit dan minyak kelapa, perbandingan volume methanolminyak, dan persentase berat katalis terhadap minyak terhadap hasil atau yield biodiesel. Alat utama yang digunakan adalah reaktor yang dilengkapi pembangkit gelombang ultrasonic dengan temperature 60 oC, tekanan 1 atm, volume 3 liter, dan frekuensi 28 kHz. Variabel proses pada penelitian ini adalah perbandingan volume minyak sawit dan kelapa 2:1, 3:1, dan 4:1, pebandingan volume metanol-minyak 0,2:1, 0,25:1, dan 0,3:1, dan persentase berat katalis KOH terhadap minyak 0,3%, 0,5%, dan 0,7%. Hasil penelitian didapat konversi tertinggi dicapai pada variabel perbandingan volume minyak sawit dan kelapa 3:1, perbandingan volume metanol/minyak 0,25:1, dan persentase berat katalis terhadap minyak dengan yield 97,26%.[A Improvement of Quality and Process for Biodiesel Production from Palm Oil and Coconut Oil Blends with Ultrasound Assisted] Limitations of solar energy as a source of raw material cannot be renewed demands for alternative raw materials that are renewable and environmentally friendly for the manufacture of biodiesel. The main production of biodiesel reaction is esterification and transestirifikasi which runs slow and requires a lot of alcohol and a catalyst. Reactions that happen yet perfect, and has not met the standard of SNI and ASTM. To improve the quality of biodiesel as well as produce maximum yield, then do the blending of raw materials between Palm oil and coconut oil and with the help of ultrasonic waves. This research aims to study the influence of variable ratio of the volume of palm oil and coconut oil, methanol-oil volume ratio, and the percentage of weight of the catalyst to oil to biodiesel results or yield. The main tool used by the reactors are equipped with ultrasonic wave generator temperature 60 oC, pressure 1 atm, 3 liters of volume, and frequency 28 kHz. Process variables in this study is a comparison of the volume of palm oil and coconut 2:1, 3:1 and 4:1, ratio volume of methanol-oil 0.2:1, 0.25:1, and 0,31:1, and the percentage of weight of KOH catalyst to oil 0.3%, 0.5% and 0.7%. Results of the study had the highest conversion achieved at variable volume ratio of palm oil and coconut 3:1, a comparison of the volume of methanol/oil 0.25:1, and the percentage of the weight of oil with the catalyst to yield 97,26%.Copyright (c) by Fakultas Teknik, Undip. All right reserved.