Search

Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceleration sensors. The chirped comb process allows for ultralow radiofrequency drive voltages, which are as much as seven orders of magnitude less than the lowest found in the literature and are generated using a chip-scale, microcontroller-driven direct digital synthesizer. The on-chip comb spectrometer is able to simultaneously interrogate both an on-chip temperature sensor and an off-chip, microfabricated optomechanical accelerometer with cutting-edge sensitivities of $\approx 5\ {\mu} \mathrm{K} \cdot \mathrm{Hz}^{-1/2}$ and $\approx 130\ \mu \mathrm{m} \cdot \mathrm{s}^{-2} \cdot \mathrm{Hz}^{-1/2}$, respectively. This platform is compatible with a broad range of existing photonic integrated circuit technologies, where its combination of frequency agility and ultralow radiofrequency power requirements are expected to have applications in fields such as quantum science and optical computing., Comment: 12 pages, 5 figures

We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is readily amenable to both self-heterodyne and dual comb spectrometers for molecular spectroscopy as well as photonic readout where the approach's agility, speed, and simplicity are expected to enable future improvements and applications.

We demonstrate a microfabricated optomechanical accelerometer that is capable of percent-level accuracy without external calibration. To achieve this capability, we use a mechanical model of the device behavior that can be characterized by the thermal noise response along with an optical frequency comb readout method that enables high sensitivity, high bandwidth, high dynamic range, and SI-traceable displacement measurements. The resulting intrinsic accuracy was evaluated over a wide frequency range by comparing to a primary vibration calibration system and local gravity. The average agreement was found to be 2.1 % for the calibration system between 0.1 kHz and 15 kHz and better than 0.2 % for the static acceleration. This capability has the potential to replace costly external calibrations and improve the accuracy of inertial guidance systems and remotely deployed accelerometers. Due to the fundamental nature of the intrinsic accuracy approach, it could be extended to other optomechanical transducers, including force and pressure sensors., Comment: 13 pages, 7 figures