Search

The 2019 13th Workshop on Recent Issues in Bioanalysis (WRIB) took place in New Orleans, LA on 1–5 April 2019 with an attendance of over 1000 representatives from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5-day, week-long event – a full immersion week of bioanalysis, biomarkers, immunogenicity and gene therapy. As usual, it was specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small- and large-molecule bioanalysis involving LCMS, hybrid LBA/LCMS, LBA cell-based/flow cytometry assays and qPCR approaches. This 2019 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2019 edition of this comprehensive White Paper has been divided into three parts for editorial reasons. This publication (Part 2) covers the recommendations on the 2018 FDA BMV guidance, 2019 ICH M10 BMV draft guideline and regulatory agencies' input on bioanalysis, biomarkers, immunogenicity and gene therapy. Part 1 (Innovation in small molecules and oligonucleotides and mass spectrometry method development strategies for large molecules bioanalysis) and Part 3 (New insights in biomarker assay validation, current and effective strategies for critical reagent management, flow cytometry validation in drug discovery and development and CLSI H62, interpretation of the 2019 FDA immunogenicity guidance and gene therapy bioanalytical challenges) are published in volume 10 of Bioanalysis, issues 22 and 24 (2019), respectively.

Pre-existing neutralizing antibodies (NAb) to adeno-associated virus (AAV) may diminish the efficacy of AAV-based therapies depending on the titer. To support gene therapy studies in pigs, the seroprevalence of NAb to AAV1, 2, 5, 6, 8, and 9 serotypes were assessed in the sera of 3 different strains of pigs consisting of 60 Norsvin Topigs-20 strain, 22 Gottingen minipigs, and 40 Yucatan minipigs. Cell-based NAb assays were developed for various AAV serotypes. The sera were tested for NAb in a Lec-2 cell line for AAV9 vector and in a COS-7 cell line for the other AAV serotypes. In the 60 Topigs-20 strain 2 to 4 years of age, 100% were positive for AAV2 NAb, 45% positive for AAV6 NAb, and ∼20% positive for each of AAV1, 5, 8, and 9 NAb. These data showed that ∼80% of Norsvin Topigs-20 pigs evaluated were seronegative for pre-existing NAb to the AAV1, 5, 8, and 9 serotypes, respectively. In 22 Gottingen minipigs at 5-6 months of age, serum AAV serotype-specific NAb coexisted with that of various other AAV serotypes at 32% to 46% between two serotypes. These results suggested that coexisting NAb resulted either from multiple AAV serotype coinfection or from one (or more) serotypes that can crossreact with other AAV serotypes in some minipigs. Among the 40 Yucatan minipigs, 20 of the minipigs were3 months old and were all negative for NAb against AAV5, 8, and 9, and only one of these 20 pigs was positive to AAV1 and 6. We further determined the titers in those positive pigs and found most Gottingen minipigs had low titer at 1:20, whereas some of Topigs-20 pigs had titers between 1:80 and 1:320, and some of Yucatan pigs had titers between 1:160 and 1:640. These results suggested that the majority of the pigs in the three strains would be amenable to gene therapy study using AAV1, AAV5, AAV8, and AAV9 and that prescreening on circulating AAV antibodies could be helpful before inclusion of pigs into studies.

We report a novel immunocapture (IC)-LC-MS/MS methodology to directly measure real time in vivo receptor occupancy (RO) for a covalent binding drug in blood lysate. A small molecule quencher was added immediately after sample collection to convert the free receptor to a quencher-bound receptor (QB-R) which was measured with the drug-bound receptor (DB-R) simultaneously by LC-MS/MS after immunocapture enrichment, followed by trypsin digestion. Addition of the quencher is necessary to prevent the free receptor from ex vivo binding with the drug. The real time RO was calculated based on the concentrations of DB-R and the free receptor (which is now QB-R) that were obtained from each sample. This strategy has been successfully applied to the measurement of the RO for Bruton's tyrosine kinase (BTK) in the blood lysate of monkeys after dosing with branebrutinib (BMS-986195), a covalent BTK inhibitor being evaluated to treat rheumatoid arthritis. A custom-made quencher, which is more reactive to BTK than branebrutinib, was added in excess amount to bind with all available free BTK to form quencher-bound BTK (QB-BTK) during blood sample collection. To measure a wide range of % BTK RO, including those of5% or95%, the required LLOQ at 0.125 nM for QB-BTK and 0.250 nM for drug-bound BTK (DB-BTK) in blood lysate were successfully achieved by using this IC-LC-MS/MS strategy. This proof-of-concept assay demonstrated its suitability with high throughput for real time in vivo BTK RO measurement as a pharmacodynamic (PD) biomarker for clinical drug development.

Stable isotope labeled (SIL) compounds have been commonly used as internal standards (IS) to ensure the accuracy and quality of liquid chromatography–mass spectrometry (LC–MS) bioanalytical assays. Recently, the application of SIL drugs and LC–MS assays to microdose absolute bioavailability (BA) studies has gained increasing attention. This approach can provide significant cost and time saving, and higher data quality compared to the accelerator mass spectrometry (AMS)-based method, since it avoids the use of radioactive drug, high-cost AMS instrumentation and complex measurement processes. It also eliminates potential metabolite interference with AMS-based assay. However, one major challenge in the application of this approach is the potential interference between the unlabeled drug, the microdose SIL drug, and the SIL-IS during LC–MS analysis. Here we report a convenient and cost-effective strategy to overcome the interference by monitoring the isotopic ion (instead of the commonly used monoisotopic ion) of the interfered compound in MS analysis. For the BMS-986205 absolute BA case study presented, significant interference was observed from the microdose IV drug [13C7, 15N]-BMS-986205 to its SIL-IS, [13C7, 15N, D3]-BMS-986205, since the difference of nominal molecular mass between the two compounds is only 3 mu, and there is a Cl atom in the molecules. By applying this strategy (monitoring the 37Cl ion for the analysis of the IS), a 90-fold reduction of interference was achieved, which allowed the use of a synthetically accessible SIL compound and enabled the fast progress of the absolute BA study. This strategy minimizes the number of stable isotope labels used for avoiding interference, which greatly reduces the difficulty in synthesizing the SIL compounds and generates significant time and cost savings. In addition, this strategy can also be used to reduce the MS response of the analyte, therefore, avoiding the detector saturation issue of LC–MS/MS assay for high concentration BMS-986205. A LC–MS/MS assay utilizing this strategy was successfully developed for the simultaneous analysis of BMS-986205 and [13C7, 15N]-BMS-986205 in dog plasma using [13C7, 15N, D3]-BMS-986205 as the IS. The assay was successfully applied to a microdose absolute BA study of BMS-986205 in dogs. The assay was also validated in human plasma and used to support a human absolute BA study. The same strategy can also be applied to other compounds, including those not containing Cl or other elements with abundant isotopes, or other applications (e.g. selection of internal standard), and the applications were presented.

Aim: The result of investigation on the procedure of sample handling and bioanalysis of small volume of plasma sample for nonclinical studies stored in 0.5-ml micronic tubes was reported. Results/methodology: Sample integrity of the small volume (25 μl) during long-term storage and the feasibility and data reliability of performing multiple re-assays on the small volume sample using 5 μl aliquot per analysis was evaluated. Conclusion: Integrity was maintained in samples (25 μl) stored for up to 1 month in 0.5-ml micronic tubes at -20°C. A 25 μl sample is sufficient for four-times of re-assays. This evaluation demonstrated the feasibility of this workflow of handling and bioanalysis on small volume plasma sample for GLP studies under the US FDA guidance.

Recombinant adeno associated viruses (rAAV) have become an important tool for the delivery of gene therapeutics due to long-standing safety and success in clinical trials. Since humans often become exposed to AAVs and develop anti-AAV antibodies (Abs), a potential impediment to the success of gene therapeutics is neutralization of the viral particle before it has had a chance to bind and enter target cells to release the transgene. Identification of subjects with preexisting Abs having neutralizing potential, and exclusion of such subjects from clinical studies is expected to enhance drug efficacy. In vitro cell-based reporter assays are most often employed to determine the level of neutralizing antibodies in a given population. Such assays measure the ability of the Abs to prevent viral binding and entry into cells by engaging epitopes on the viral capsid involved in host cell receptor binding. In general, cell-based assays are low throughput and labor intensive and may suffer from high variability and low sensitivity issues. In contrast, enzyme-linked immunosorbent assays (ELISAs) are simpler, less variable, and have higher throughput. Demonstrating a correlation between neutralizing Abs assessed by a cell-based assay and total binding Abs measured in an ELISA will enable the use and substitution of the latter for screening and exclusion of subjects. In this work, we describe the development of a highly sensitive, specific, robust, and reproducible chemiluminescent ELISA method for the detection of total anti-AAV9 Abs. Using this method, we analyzed the prevalence of preexisting anti-AAV9 Abs in 100 serum samples from heart disease patients. Analysis of neutralizing Abs in the same samples using an in vitro cell-based assay showed a strong correlation between total anti-AAV9 Abs and neutralizing Abs, indicating the feasibility of using the total Ab ELISA in the future for patient screening and exclusion.

Measurement of monoclonal antibodies (M-proteins) plays an important role in the diagnosis and treatment monitoring of multiple myeloma. Currently available M-protein assays have several limitations, particularly because of their lack of sensitivity and propensity to therapeutic antibody (t-mAb) interference. A previously described mass spectrometry method termed monoclonal immunoglobulin rapid accurate mass measurement (miRAMM) is more sensitive than current clinical tests and can provide a solution for resolving t-mAb interferences. However, the original miRAMM workflow is too complex for the throughput needed to analyze a large number of samples. Here, we describe a high-throughput liquid chromatography-high-resolution mass spectrometry (HT-LC-HRMS) approach that employs a fully automated immunocapture step, significantly improved immunoglobulin recovery, simplified chromatography, and high throughput (HT) data processing. In this HT-LC-HRMS approach, raw spectra of the peaks eluting from the LC column during the predefined time period are automatically deconvoluted without the need to identify and monitor the retention time of each patient-specific M-protein. The deconvoluted peak heights of M-protein and therapeutic antibody light chain are conveniently used for quantitation. With the total LC-HRMS measurement time being only 11.0 min, this method was able to differentiate between the M-protein and elotuzumab mass signatures in 91 out of 92 (98.9%) multiple myeloma serum samples tested. The single interference case was resolved using the mass signature of a heavy chain. In addition to resolving t-mAb interference, the developed assay has a 25-fold improvement in sensitivity over immunofixation electrophoresis and can potentially provide an objective tracking of M-proteins in patients with complete response.

Despite huge promises, bioanalysis of protein biomarkers in formalin-fixed paraffin-embedded (FFPE) tissues by liquid chromatography-tandem mass spectrometry (LC-MS/MS) for clinical applications is still very challenging. Here, we describe a sensitive and robust LC-MS/MS assay to quantify clinical protein biomarkers in FFPE tumor sections using automated antipeptide antibody immunocapture followed by in-sample calibration curve (ISCC) strategy with multiple isotopologue reaction monitoring (MIRM) technique. ISCC approach with MIRM of stable isotopically labeled (SIL) peptides eliminated the need for authentic matrices for external calibration curves, overcame the matrix effects, and validated the quantification range in each individual sample. Specifically, after deparaffinization, rehydration, antigen retrieval, and homogenization, the protein analytes in FFPE tumor tissues were spiked with a known concentration of one SIL peptide for each analyte, followed by trypsin digestion and antipeptide immunocapture enrichment prior to MIRM-ISCC-based LC-MS/MS analysis. This approach has been successfully used for sensitive quantification of programmed cell death-1 (PD-1) and programmed cell death-ligand 1 (PD-L1) in 15 representative FFPE tumor samples from lung, colorectal, and head and neck cancer patients. Except for one sample, PD-L1 and PD-1 in all samples were quantifiable using this assay with concentrations of 27.85-798.43 (amol/μg protein) for PD-L1 and 16.96-129.89 (amol/μg protein) for PD-1. These results were generally in agreement with the immunohistochemistry (IHC) data but with some exceptions. This approach demonstrated the feasibility to quantify low abundant protein biomarkers in FFPE tissues with improved sensitivity, specificity, and robustness and showed great potential as an orthogonal analytical approach to IHC for clinical applications.

Historically, ligand-binding assays for pharmacokinetic samples employed duplicate rather than singlet-based analysis. Herein, the Translational and absorption, distribution, metabolism and excretion (ADME) Sciences Leadership Group of the International Consortium for Innovation and Quality in Pharmaceutical Development (IQ) presents a study aiming to determine the value of duplicate versus singlet-based testing. Based on analysis of data collected from eight organizations for 20 drug candidates representing seven molecular types and four analytical platforms, statistical comparisons of validation and in-study quality controls and study unknown samples demonstrated good agreement across duplicate sets. Simulation models were also used to assess the impact of sample duplicate characteristics on bioequivalence outcomes. Results show that testing in singlet is acceptable for assays with % CV ≤15% between duplicates. Singlet-based approach is proposed as the default for ligand-binding assays while a duplicate-based approach is needed where imprecision and/or inaccuracy impede the validation of the assay.

Biological therapeutics are foreign antigens and can potentially induce immune response resulting in the formation of anti-drug antibodies (ADA), which in turn may lead to a wide range of side effects. Neutralizing Ab (NAb) is a subset of ADA that can bind to the pharmacological activity regions of therapeutic to inhibit or complete neutralize its clinical efficacy. A cell-based functional NAb assay is preferred to characterize its neutralization activity. However, cell-based NAb assays are often vulnerable to drug interference, as well as interference from numerous serum factors, including but not limited to growth factors and disease-related cytokines. Bead Extraction with Acid Dissociation (BEAD) has been successfully applied to remove circulating drug and/or other interfering factors from human serum samples, thereby enriching for ADA/NAb. However, the harsh acid used in the extraction procedure can cause irreversible denaturing of NAb and lead to underestimated NAb measurement. Herein we describe a new approach when acid-dissociation is not optimal for a PEGylated domain antibody (Ab). We further demonstrate that heating at 62 °C can not only dissociate drug/ADA/NAb immune complex but also selectively and irreversibly denature domain Ab drug due to much lower thermal stability of the domain Ab, when compared to that of full antibodies. The irreversible denaturing of the drug favors the formation of an immune complex between ADA/NAb and the added biotinylated drug thus increasing the recovery of ADA/NAb from samples. We call this new procedure Bead Extraction with Heat Dissociation (BEHD), which can potentially be applied to other NAb assays that have poor compatibility with acid dissociation.

The 2019 13

The 2019 13th Workshop on Recent Issues in Bioanalysis (WRIB) took place in New Orleans, LA, USA on April 1–5, 2019 with an attendance of over 1000 representatives from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5-day, week-long event – a full immersion week of bioanalysis, biomarkers, immunogenicity and gene therapy. As usual, it was specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small- and large-molecule bioanalysis involving LCMS, hybrid LBA/LCMS, LBA cell-based/flow cytometry assays and qPCR approaches. This 2019 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2019 edition of this comprehensive White Paper has been divided into three parts for editorial reasons. This publication (Part 1) covers the recommendations on Innovation in Small Molecules and Oligonucleotides & Mass Spec Method Development Strategies for Large Molecules Bioanalysis. Part 2 (2018 FDA BMV Guidance, 2019 ICH M10 BMV Draft Guideline and regulatory agencies' input on bioanalysis, biomarkers, immunogenicity and gene therapy) and Part 3 (New Insights in Biomarkers Assays Validation, Current & Effective Strategies for Critical Reagent Management, Flow Cytometry Validation in drug discovery & development & CLSI H62, Interpretation of the 2019 FDA Immunogenicity Guidance and The Gene Therapy Bioanalytical Challenges) are published in volume 11 of Bioanalysis, issues 23 and 24 (2019), respectively.

Ipilimumab is the first US FDA-approved immune checkpoint-blocking antibody drug to harness the patient's own immune cells. One of the postmarketing requirements is to develop a cell-based neutralizing antibody assay. Here, we share some of the most challenging aspects encountered during the assay development: new cell line construction; an unexpected inhibition of T-cell activation by low concentrations of ipilimumab; and two issues caused by sample pretreatment with acid dissociation to overcome drug interference: instability of neutralizing antibody positive control at low pH, and incompatibility of commonly used acid dissociation buffers in the cell assay. After troubleshooting and optimization, we successfully validated the assay and used the assay to test clinical samples to date.

Aim: Coproporphyrins (CP-I and CP-III) have been identified as possible biomarkers to predict human hepatic organic anion-transporting polypeptides-mediated-drug-interactions for a new drug entering clinical development. Results: The method is applicable to quantify plasma CP-I and CP-III within 0.078–15.0 nM. The results identify and address a number of challenges encountered with porphyrin assays such as photodegradation and interferences. To overcome interferences from ubiquitous porphyrins, a surrogate matrix was used to prepare calibration standards. Quality controls were prepared in plasma and surrogate matrix to ensure parallelism between surrogate matrix and plasma. Conclusion: A robust UHPLC–MS/MS assay was developed and validated for CP-I and CP-III in plasma, and is currently applied to clinical studies to confirm suitability of Coproporphyrins as a potential substitute for drug–drug interaction study.

Ligand-binding assay (LBA) performance depends on quality reagents. Strategic reagent screening and characterization is critical to LBA development, optimization and validation. Application of advanced technologies expedites the reagent screening and assay development process. By evaluating surface plasmon resonance technology that offers high-throughput kinetic information, this article aims to provide perspectives on applying the surface plasmon resonance technology to strategic LBA critical reagent screening and characterization supported by a number of case studies from multiple biotherapeutic programs.

Accurate quantification of soluble glypican-3 in clinical samples using immunoassays is challenging, because of the lack of appropriate antibody reagents to provide a full spectrum measurement of all potential soluble glypican-3 fragments in vivo. Glypican-3 SOMAmer (slow off-rate modified aptamer) is a novel reagent that binds, with high affinity, to a far distinct epitope of glypican-3, when compared to all available antibody reagents generated in-house. This paper describes an integrated analytical approach to rational selection of key reagents based on molecular characterization by epitope mapping, with the focus on our work using a SOMAmer as a new reagent to address development challenges with traditional antibody reagents for the soluble glypican-3 immunoassay. A qualified SOMAmer-based assay was developed and used for soluble glypican-3 quantification in hepatocellular carcinoma (HCC) patient samples. The assay demonstrated good sensitivity, accuracy, and precision. Data correlated with those obtained using the traditional antibody-based assay were used to confirm the clinically relevant soluble glypican-3 forms in vivo. This result was reinforced by a liquid chromatography tandem mass spectrometry (LC-MS/MS) assay quantifying signature peptides generated from trypsin digestion. The work presented here offers an integrated strategy for qualifying aptamers as an alternative affinity platform for immunoassay reagents that can enable speedy assay development, especially when traditional antibody reagents cannot meet assay requirements.

The 2016 10th Workshop on Recent Issues in Bioanalysis (10th WRIB) took place in Orlando, Florida with participation of close to 700 professionals from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations, and regulatory agencies worldwide. WRIB was once again a weeklong event – A Full Immersion Week of Bioanalysis for PK, Biomarkers and Immunogenicity. As usual, it is specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small and large molecules involving LCMS, hybrid LBA/LCMS, and LBA approaches, with the focus on PK, biomarkers and immunogenicity. This 2016 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. This White Paper is published in 3 parts due to length. This part (Part 3) discusses the recommendations for large molecule bioanalysis using LBA, biomarkers and immunogenicity. Parts 1 (small molecule bioanalysis using LCMS) and Part 2 (Hybrid LBA/LCMS and regulatory inputs from major global health authorities) have been published in the Bioanalysis journal, issues 22 and 23, respectively.

Biological drug products may elicit an antidrug antibody (ADA) response. The current widely used bridging ligand binding assay (LBA) is the gold standard for ADA assessments in drug development, which is a qualitative assay followed by a quasi-quantitative titer analysis but can be prone to interferences from biological matrices, drug targets and circulating drugs. We present our perspectives and findings in exploring a hybrid LBA/LC–MS as an orthogonal bioanalytical tool for clinical immunogenicity assessments. The hybrid LBA/LC–MS is a semiquantitative assay with acceptable specificity, drug tolerance and the capability of multiplexed detection of ADA isotypes. The assay results suggest this technology to be a promising and complementary bioanalytical tool that can provide informative immunogenicity data in drug development.

ND-L02-s0201/BMS-986263 is a lipid nanoparticle (LNP) drug product containing a heat shock protein 47 (HSP47)–specific small interfering ribonucleic acid (siRNA) and being developed for the treatment of liver and idiopathic pulmonary fibrosis. To address immunogenicity-related issues, we developed a robust, fit-for-purpose (FFP) three-tier electrochemiluminescent (ECL) anti-drug antibody (ADA) assay for the detection of antibodies (Abs) generated to surface-exposed components of BMS-986263. The drug was coated directly on plates, and several Abs specific for polyethylene glycol (PEG) and other surface components were tested for use as positive quality controls (QCs). Following selection of a rabbit monoclonal anti-PEG Ab, the assay was optimized, and various method development challenges specific to the modality and pseudo surrogate rabbit control were addressed. Screening, confirmatory, and titer cut points were validated following a statistical evaluation of 41 individual K2EDTA human plasma samples at a minimum required dilution (MRD) of 100. Assay precision, sensitivity, selectivity, drug tolerance, and hook effect were determined for the rabbit Ab prepared in human K2EDTA plasma matrix. The assay was used to interrogate anti-drug Ab (ADA) responses in normal human subjects who were administered 90 mg of the drug intravenously (IV) once every week for 3 weeks in phase I clinical trials. All pre- and post-dose samples were found to be negative for ADA. Based on these results, we concluded that BMS-986263 is not immunogenic. To the best of our knowledge, this work represents the first ADA method developed and reported for an LNP-based drug product.

A novel methodology of in-sample calibration curves (ISCC) using multiple isotopologue reaction monitoring (MIRM) of multiple naturally occurring isotopologue transitions of a stable isotopically labeled (SIL) analyte for instant liquid chromatography-tandem mass spectrometry (LC-MS/MS) bioanalysis of biomarkers, biotherapeutics, and small-molecule compounds is proposed and demonstrated for the first time. The theoretical isotopic abundances of the SIL analyte in its MIRM channels can be accurately calculated based on the isotopic distributions of its daughter ion and neutral loss. The isotopic abundances in these MIRM channels can also be accurately measured with a triple quadrupole mass spectrometer. By spiking a known amount of a SIL analyte into each study sample, an ISCC can be established based on the relationship between the calculated theoretical isotopic abundances (analyte concentration equivalents) in the selected MIRM channels of the SIL analyte and the measured MS/MS peak areas in the corresponding MIRM channels in each individual study sample. The analyte concentration of each study sample can then be calculated individually with the ISCC instantly without using an external calibration curve. The MIRM-ISCC-LC-MS/MS methodology was evaluated and demonstrated in this work with the examples of quantitation of a protein biomarker in human and monkey serum processed with immunocapture and trypsin digestion; three surrogate peptides in trypsin-digested human colon tissue homogenates; and a small-molecule drug in human and rat plasma extracted with liquid-liquid extraction. The potential applications of the MIRM-ISCC-LC-MS/MS methodology in quantitative proteomics, clinical laboratories, and other areas are also discussed in this paper. Without the need for using external calibration curves, this novel MIRM-ISCC-LC-MS/MS methodology can provide accurate and reliable bioanalysis in many potential applications, especially for cases where authentic matrices for external calibration curves are not available.

A mechanistic model of the immune response was evaluated for its ability to predict anti-drug antibody (ADA) and their impact on pharmacokinetics (PK) and pharmacodynamics (PD) for a biotherapeutic in a phase 1 clinical trial. Observed ADA incidence ranged from 33 to 67% after single doses and 27–50% after multiple doses. The model captured the single dose incidence well; however, there was overprediction after multiple dosing. The model was updated to include a T-regulatory (Treg) cell mediated tolerance, which reduced the overprediction (relative decrease in predicted incidence rate of 21.5–59.3% across multidose panels) without compromising the single dose predictions (relative decrease in predicted incidence rate of 0.6–13%). The Treg-adjusted model predicted no ADA impact on PK or PD, consistent with the observed data. A prospective phase 2 trial was simulated, including co-medication effects in the form of corticosteroid-induced immunosuppression. Predicted ADA incidences were 0–10%, depending on co-medication dosage. This work demonstrates the utility in applying an integrated, iterative modeling approach to predict ADA during different stages of clinical development.

Most biotherapeutics can elicit immune responses in dosed recipients generating anti-drug antibodies (ADAs). Neutralizing antibodies (NAbs) are a subpopulation of ADAs that can potentially impact patient safety and directly mediate loss of drug efficacy by blocking the biological activity of a therapeutic product. Therefore, NAb detection is an important aspect of immunogenicity assessment, requiring sensitive and reliable methods reflective of the therapeutic mechanism of action (MoA). Both cell-based and non cell-based assays are viable options for NAb assessment. However, the scientific approach for the selection of a suitable assay format (cell-based or non cell-based) for NAb assessment is not currently well defined. In this manuscript, the authors summarize the design and utility of cell-based and non cell-based NAb assays and recommend a NAb assay format selection approach that relies on a combination of three factors. These include (i) the therapeutic MoA, (ii) the evidence of desirable assay performance characteristics, and (iii) risk of immunogenicity. The utility of correlating NAb response with pharmacodynamic data is also discussed. The aim of this paper is to provide a consistent strategy that will guide the selection of scientifically justified assay formats capable of detecting clinically relevant NAbs for biotherapeutics with varying MoAs and diverse complexity.

Background: The bioanalytical strategy for antibody–drug conjugates (ADC) includes multiple integrated measurements of pharmacologically relevant ADC. Methods & results: Three ligand-binding assays were validated for the measurement of total antibody, active ADC and total ADC. Accuracy and precision demonstrate %bias from -8 to 14%, %CV from 3 to 11% and total error from 3 to 21%, with >98% samples meeting incurred sample reanalysis criteria. Each assay met stability, selectivity, dilutional integrity, carry over and specificity criteria with no interference from associated metabolite/impurity. Given the active ADC assay sensitivity to payload, active ADC was used to assess drug to antibody ratio. Discussion & conclusion: Implementation of a microfluidic automated platform enabled high throughput sample analysis of multiple analytes with minimal sample processing.

Aim: A ligand-binding assay (LBA) was used to measure exposure of PRM-151, the recombinant form of human pentraxin-2 (PTX-2), a complex pentamer with multiple binding partners. However, the assay showed a lack of dose-dependent exposure in select preclinical species and it could not differentiate the infused PRM-151 from the endogenous PTX-2 in nonhuman primates. Materials & methods: Instead of assessing interference from its multiple binding partners, which could be time consuming and laborious, a LC–MS assay avoid of these interference was implemented to measure ‘total’ drug without the use of immunoaffinity capture reagents. Results & Conclusion: The resultant LC–MS data confirmed the original data and the lack of dose-dependent exposure is now understood to be due to the multiple and diverse targets and functions and resultant complex biodistribution rather than an assay artifact.

The 2017 11th Workshop on Recent Issues in Bioanalysis took place in Los Angeles/Universal City, California, on 3–7 April 2017 with participation of close to 750 professionals from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5-day, week-long event – a full immersion week of bioanalysis, biomarkers and immunogenicity. As usual, it was specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small- and large-molecule analysis involving LC–MS, hybrid ligand-binding assay (LBA)/LC–MS and LBA approaches. This 2017 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2017 edition of this comprehensive White Paper has been divided into three parts for editorial reasons. This publication (Part 3) covers the recommendations for large-molecule bioanalysis, biomarkers and immunogenicity using LBA. Part 1 (LC–MS for small molecules, peptides and small molecule biomarkers) and Part 2 (hybrid LBA/LC–MS for biotherapeutics and regulatory agencies’ inputs) are published in volume 9 of Bioanalysis, issues 22 and 23 (2017), respectively.

Background: Polyethylene glycol (PEG) is a polymer that can be conjugated with therapeutic proteins. Monitoring anti-PEG antibodies in human subjects may be required as part of immunogenicity assessment. The lack of well-characterized anti-PEG reagents have limited our understanding of anti-PEG humoral response. Results: Antibodies reactive to PEG were engineered with a human IgG1 Fc. Surface plasmon resonance and plate-based methods demonstrated that their binding was dependent on molecular weight (MW) of PEG. Specificity experiments using chemical analogs identified their specificity. Conclusion: Affinity, specificity and MW of PEG are critical characteristics that impact interactions of anti-PEG antibodies with PEG. These attributes especially MW of PEG and the assay formats may impact the ability to detect anti-PEG antibodies.

Background: The bioanalytical strategy for antibody–drug conjugates (ADC) includes numerous measurements integrally designed to provide comprehensive characterization of PK, PD and immunogenicity. This manuscript describes the utilization of reagents specifically tailored to an ADC with a microtubule polymerization inhibitor payload and cathepsin B cleavable linker. Methods: The PK strategy includes the evaluation of physiological levels of total antibody, active ADC, total ADC, antibody-conjugated payload and unconjugated payload. These data are evaluated in the context of target and antidrug antibody levels to elucidate bioactive ADC. Results & conclusion: Herein, we discuss how this strategy has been applied and present our preliminary observations. Continuously evolving to meet pipeline demands, the integrated bioanalytical data will provide critical insights into the exposure–response relationship.

Bioanalytical data from early human studies conducted in normal volunteers are often used for building pharmacokinetic/pharmacodynamic models that can predict outcomes of future studies in diseased patients. Thus, it is important to develop and validate reliable and accurate bioanalytical assays that instill confidence that the intended therapeutic species (total or free) are being measured. Assays quantifying the free therapeutic species, the partially bound (for multivalent therapeutics) and unbound species, require much more characterization than assays that quantify the total therapeutic species. We have developed an immunoassay to measure free BMS-962476, an Adnectin protein therapeutic against soluble proprotein convertase subtilisin kexin (PCSK)-9, and performed an in-depth characterization of the accuracy of this assay with the assistance of modeling. The experimental data correlates with modeled data within 15% at all clinically relevant levels of PCSK9 in normal and diseased populations.

Biological therapeutics can induce an undesirable immune response resulting in the formation of anti-drug antibodies (ADA), including neutralizing antibodies (NAbs). Functional (usually cell-based) NAb assays are preferred to determine NAb presence in patient serum, but are often subject to interferences from numerous serum factors, such as growth factors and disease-related cytokines. Many functional cell-based NAb assays are essentially drug concentration assays that imply the presence of NAbs by the detection of small changes in functional drug concentration. Any drug contained in the test sample will increase the total amount of drug in the assay, thus reducing the sensitivity of NAb detection. Biotin-drug Extraction with Acid Dissociation (BEAD) has been successfully applied to extract ADA, thereby removing drug and other interfering factors from human serum samples. However, to date there has been no report to estimate the residual drug level after BEAD treatment when the drug itself is a human monoclonal antibody; mainly due to the limitation of traditional ligand-binding assays. Here we describe a universal BEAD optimization procedure for human monoclonal antibody (mAb) drugs by using a LC-MS/MS method to simultaneously measure drug (a mutant human IgG4), NAb positive control (a mouse IgG), and endogenous human IgGs as an indicator of nonspecific carry-over in the BEAD eluate. This is the first report demonstrating that residual human mAb drug level in clinical sample can be measured after BEAD pre-treatment, which is critical for further BEAD procedure optimization and downstream immunogenicity testing.

The 2014 8th Workshop on Recent Issues in Bioanalysis (8th WRIB), a 5-day full immersion in the evolving field of bioanalysis, took place in Universal City, California, USA. Close to 500 professionals from pharmaceutical and biopharmaceutical companies, contract research organizations and regulatory agencies worldwide convened to share, review, discuss and agree on approaches to address current issues of interest in bioanalysis. The topics covered included both small and large molecules, and involved LCMS, hybrid LBA/LCMS, LBA approaches and immunogenicity. From the prolific discussions held during the workshop, specific recommendations are presented in this 2014 White Paper. As with the previous years’ editions, this paper acts as a practical tool to help the bioanalytical community continue advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2014 edition of this comprehensive White Paper has been divided into three parts for editorial reasons. This publication (Part 3) covers the recommendations for Large molecules bioanalysis using LBA and Immunogenicity. Part 1 (Small molecules bioanalysis using LCMS) and Part 2 (Hybrid LBA/LCMS, Electronic Laboratory Notebook and Regulatory Agencies' Input) were published in the Bioanalysis issues 6(22) and 6(23), respectively.

We developed a homogeneous bridging anti-drug antibody (ADA) assay on an electro chemiluminescent immunoassay (ECLIA) platform to support the immunogenicity evaluation of a dimeric domain antibody (dAb) therapeutic in clinical studies. During method development we evaluated the impact of different types of acid at various pH levels on polyclonal and monoclonal ADA controls of differing affinities and on/off rates. The data shows for the first time that acids of different pH can have a differential effect on ADA of various affinities and this in turn impacts assay sensitivity and drug tolerance as defined by these surrogate controls. Acid treatment led to a reduction in signal of intermediate and low affinity ADA, but not high affinity or polyclonal ADA. We also found that acid pretreatment is a requisite for dissociation of drug bound high affinity ADA, but not for low affinity ADA-drug complexes. Although we were unable to identify an acid that would allow a 100% retrieval of ADA signal post-treatment, use of glycine pH3.0 enabled the detection of low, intermediate and high affinity antibodies (Abs) to various extents. Following optimization, the ADA assay method was validated for clinical sample analysis. Consistencies within various parameters of the clinical data such as dose dependent increases in ADA rates and titers were observed, indicating a reliable ADA method. Pre- and post-treatment ADA negative or positive clinical samples without detectable drug were reanalyzed in the absence of acid treatment or presence of added exogenous drug respectively to further assess the effectiveness of the final acid treatment procedure. The overall ADA results indicate that assay conditions developed and validated based on surrogate controls sufficed to provide a reliable clinical data set. The effect of low pH acid treatment on possible pre-existing ADA or soluble multimeric target in normal human serum was also evaluated, and preliminary data indicate that acid type and pH also affect drug-specific signal differentially in individual samples. The results presented here represent the most extensive analyses to date on acid treatment of a wide range of ADA affinities to explore sensitivity and drug tolerance issues. They have led to a refinement of our current best practices for ADA method development and provide a depth of data to interrogate low pH mediated immune complex dissociation.

Many biotherapeutics currently in development have complex mechanisms of action and contain more than one domain, each with a specific role or function. Examples include antibody-drug conjugates (ADC), PEGylated, fusion proteins and bi-specific antibodies. As with any biotherapeutic molecule, a multi-domain biotherapeutic (MDB) can elicit immune responses resulting in the production of specific anti-drug antibodies (ADA) when administered to patients. As it is beneficial to align industry standards for evaluating immunogenicity of MDBs, this paper highlights pertinent immunogenicity risk factors and describes steps involved in the design of a testing strategy to detect and characterize binding (non-neutralizing and neutralizing, NAb) ADAs. In a common tier based approach, samples identified as ADA screen positive are confirmed for the binding specificity of the antibodies to the drug molecule via a confirmatory assay. The confirmation of specificity is generally considered as a critical step of the tier based approach in overall ADA response evaluation. Further characterization of domain specificity of polyclonal anti-MDB ADA response may be required based on the analysis of molecule specific risk factors. A risk based approach in evaluating the presence of NAbs for MDB is discussed in this article. Analysis of domain-specific neutralizing antibody reactivity should be based on the risk assessment as well as the information learned during binding ADA evaluation. Situations where additional characterization of NAb specificity is possible and justified are discussed. Case studies demonstrating applicability of the risk factor based approach are presented. In general, the presence of a domain with high immunogenicity risk or presence of a domain with high endogenous protein homology may result in an overall high immunogenicity risk level for the entire MDB and can benefit from domain specificity characterization of immune response. For low immunogenicity risk MDBs, domain specificity characterization could be re-considered at later clinical phases based on the need to explain specific clinical observations. Inclusion of domain specificity characterization in early phase clinical studies for MDBs with limited clinical immunogenicity experience may be considered to help understand its value in later clinical development. It is beneficial and is recommended to have a well-defined plan for the characterization of ADA domain specificity and data analysis prior to the initiation of sample testing. Overall, best practices for immunogenicity evaluation of complex MDBs are discussed.

The Global Bioanalysis Consortium (GBC) set up an international team to explore the impact of immunogenicity on pharmacokinetic (PK) assessments. The intent of this paper is to define the field and propose best practices when developing PK assays for biotherapeutics. We focus on the impact of anti-drug antibodies (ADA) on the performance of PK assay leading to the impact on the reported drug concentration and exposure. The manuscript describes strategies to assess whether the observed change in the drug concentration is due to the ADA impact on drug clearance rates or is a consequence of ADA interference in the bioanalytical method applied to measure drug concentration. This paper provides the bioanalytical scientist guidance for developing ADA-tolerant PK methods. It is essential that the data generated in the PK, ADA, pharmacodynamic and efficacy/toxicity evaluations are viewed together. Therefore, the extent for the investigation of the PK sensitivity to the presence of ADA should be driven by the project needs and risk based.

Background: With a rapid increase in the number of novel biotherapeutic programs in the pipelines, efficient development of ligand-binding assays for PK and PD studies in the early discovery stage has become more important than ever. Methodology: A four-step process was evaluated to quickly develop multiple ‘fit-for-purpose’ Gyrolab® ligand-binding assays in parallel. It covered the following four steps: reagent labeling, reagent screening, assay optimization; and, assay qualification. Results: Eight assays for two programs were developed and qualified in less than 2 weeks. These assays met the specifications of sufficient sensitivity with LLOQ between 2 and 50 ng/ml, %CV

All biotherapeutics have the potential to induce an immune response. This immunological response is complex and, in addition to antibody formation, involves T cell activation and innate immune responses that could contribute to adverse effects. Integrated immunogenicity data analysis is crucial to understanding the possible clinical consequences of anti-drug antibody (ADA) responses. Because patient- and product-related factors can influence the immunogenicity of a therapeutic protein, a risk-based approach is recommended and followed by most drug developers to provide insight over the potential harm of unwanted ADA responses. This paper examines mitigation strategies currently implemented and novel under investigation approaches used by drug developers. The review describes immunomodulatory regimens used in the clinic to mitigate deleterious ADA responses to replacement therapies for deficiency syndromes, such as hemophilia A and B, and high risk classical infantile Pompe patients (e.g., cyclophosphamide, methotrexate, rituximab); novel in silico and in vitro prediction tools used to select candidates based on their immunogenicity potential (e.g., anti-CD52 antibody primary sequence and IFN beta-1a formulation); in vitro generation of tolerogenic antigen-presenting cells (APCs) to reduce ADA responses to factor VIII and IX in murine models of hemophilia; and selection of novel delivery systems to reduce in vivo ADA responses to highly immunogenic biotherapeutics (e.g., asparaginase). We conclude that mitigation strategies should be considered early in development for biotherapeutics based on our knowledge of existing clinical data for biotherapeutics and the immune response involved in the generation of these ADAs.

The Gyrolab™ xP is a microfluidic platform for conducting ligand binding assays (LBAs) and is recognized for its utility in discovery bioanalysis. However, few reports have focused on the technology for regulated bioanalysis. This technology has the advantage of low reagent consumption, low sample volume, and automated ligand binding methods. To improve bioanalysis testing timelines and increase the speed at which biotherapeutics are delivered to patients, we evaluated the technology for its potential to deliver high-quality data at reduced testing timelines for regulated bioanalysis. Six LBA methods were validated to support bioanalysis for GLP toxicokinetic or clinical pharmacokinetic studies. Validation, sample analysis, and method transfer are described. In total, approximately 4000 samples have been tested for regulated bioanalysis to support 6 GLP toxicology studies and approximately 1000 samples to support 2 clinical studies. Gyrolab™ xP had high run pass rates (≥83%) and high incurred sample reanalysis (ISR) pass rates (>94%). The maximum total error observed across all QC levels for a given assay was

The 2015 9th Workshop on Recent Issues in Bioanalysis (9th WRIB) took place in Miami, Florida with participation of 600 professionals from pharmaceutical and biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5 day, week-long event – A Full Immersion Bioanalytical Week – specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest in bioanalysis. The topics covered included both small and large molecules, and involved LCMS, hybrid LBA/LCMS and LBA approaches, including the focus on biomarkers and immunogenicity. This 2015 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2015 edition of this comprehensive White Paper has been divided into three parts. Part 3 discusses the recommendations for large molecule bioanalysis using LBA, biomarkers and immunogenicity. Part 1 (small molecule bioanalysis using LCMS) and Part 2 (hybrid LBA/LCMS and regulatory inputs from major global health authorities) have been published in volume 7, issues 22 and 23 of Bioanalysis, respectively.

We have developed and fully validated a fast and simple LC-MS/MS assay to quantitate a therapeutic protein BMS-A in cynomolgus monkey serum. Prior to trypsin digestion, a recently reported sample pretreatment method was applied to remove more than 95% of the total serum albumin and denature the proteins in the serum sample. The pretreatment procedure simplified the biological sample prior to digestion, improved digestion efficiency and reproducibility, and did not require reduction and alkylation. The denatured proteins were then digested with trypsin at 60 °C for 30 min and the tryptic peptides were chromatographically separated on an Acquity CSH column (2.1 mm × 50 mm, 1.7 μm) using gradient elution. One surrogate peptide was used for quantitation and another surrogate peptide was selected for confirmation. Two corresponding stable isotope labeled peptides were used to compensate variations during LC-MS detection. The linear analytical range of the assay was 0.50-500 μg/mL. The accuracy (%Dev) was within ± 5.4% and the total assay variation (%CV) was less than 12.0% for sample analysis. The validated method demonstrated good accuracy and precision and the application of the innovative albumin removal sample pretreatment method improved both assay sensitivity and robustness. The assay has been applied to a cynomolgus monkey toxicology study and the serum sample concentration data were in good agreement with data generated using a quantitative ligand-binding assay (LBA). The use of a confirmatory peptide, in addition to the quantitation peptide, ensured the integrity of the drug concentrations measured by the method.