Search

Background: The MC-Media Pad™ Yeast and Mold (YM) is a ready-to use culture device that combines a test pad coated with medium and water-absorption polymers that is designed for the rapid quantification of yeast and mold in food products. Objective: The MC-Media Pad YM was compared with the U.S. Food and Drug Administration (FDA) Bacteriological Analytical Manual (BAM) for the enumeration of yeast and mold in frozen orange juice concentrate. Methods: The candidate method was evaluated using a paired study design in a multilaboratory collaborative study following the current AOAC Validation Guidelines. Three target contamination levels (low, 10–100 CFU/g; medium, 100–1000 CFU/g; and high 1000–10 000 CFU/g) and an uninoculated control level (0 CFU/g) were evaluated. MC-Media Pad YM devices were enumerated after 48 and 72 h of incubation. Results: Plate count obtained by both methods were log-transformed and the difference of means (including 95% confidence intervals), repeatability SD, and SD were determined for each contamination level. Conclusions: No statistical difference was observed between the MC-Media Pad YM (for both 48 and 72 h) and the FDA BAM for each contamination level. Highlights: The new method offers a convenient alternative to the reference method (FDA BAM) for detection of yeast and mold contamination in food products, yielding reliable and comparable results in 48 h compared to 5 days for the reference method.

Background The MC-Media Pad® Rapid Aerobic Count (RAC) is a ready-to-use culture device combining a test pad coated with medium and water absorption polymers that are designed for the rapid quantification of total aerobic bacteria in food products. Objective The MC-Media Pad RAC was compared to the U.S. Department of Agriculture Food Safety and Inspection Service Microbiology Laboratory Guidebook, Chapter 3.02: Quantitative Analysis of Bacteria in Foods as Sanitary Indicators for raw ground pork and the Standard Methods for the Examination of Dairy Products, Chapter 6: Microbial Count Methods for yogurt drink. Method The candidate method was evaluated against the reference methods using a paired study design in a multi-collaborator study, following the current AOAC INTERNATIONAL Official Methods of AnalysisSM Appendix J guidelines. Three target contamination levels (low, medium, and high) were evaluated. MC-Media Pad RAC devices were enumerated after 24 and 48 h of incubation. Results Plate counts obtained by both methods were log10-transformed and the difference of means (including 95% confidence intervals), repeatability SD, and reproducibility SD were determined for each contamination level. All 95% confidence intervals for mean difference fell easily within ±0.10, the performance requirement being ±0.5. Conclusion The MC-Media Pad RAC (for both 24 and 48 h) and both reference methods for each contamination level were therefore shown to be equivalent, with 97.5% confidence. Highlights The new method offers a convenient alternative to the reference methods for detection of aerobic plate count in food products, yielding reliable and comparable results in 24 or 48 h compared to 48 h for the reference methods.

For nearly a century, conventional microbiological methods have been standard practice for detecting and identifying pathogens in food. Nevertheless, the microbiological safety of food has improved and various rapid methods have been developed to overcome the limitations of conventional methods. Alternative methods are expected to detect low cell numbers, since the presence in food of even a single cell of a pathogenic organism may be infectious. With respect to low population levels, the performance of a detection method is assessed by producing serial dilutions of a pure bacterial suspension to inoculate representative food matrices with highly diluted bacterial cells (fewer than 10 CFU/ml). The accuracy of data obtained by multiple dilution techniques is not certain and does not exclude some colonies arising from clumps of cells. Micromanipulation techniques to capture and isolate single cells from environmental samples were introduced more than 40 years ago. The main limitation of the current micromanipulation technique is still the low recovery rate for the growth of a single cell in culture medium. In this study, we describe a new single cell isolation method and demonstrate that it can be used successfully to grow various types of microorganism from picked individual cells. Tests with Gram-positive and Gram-negative organisms, including cocci, rods, aerobes, anaerobes, yeasts and molds showed growth recovery rates from 60% to 100% after micromanipulation. We also highlight the use of our method to evaluate and challenge the detection limits of standard detection methods in food samples contaminated by a single cell of Salmonella enterica.

The Milliflex® Rapid Microbiology Detection and Enumeration System (RMDS) is an automated platform developed for the rapid detection of microbial contaminants in filterable samples. Based on membrane filtration, adenosine triphosphate bioluminescence and image analysis, RMDS gives microorganism enumeration a detection time reduced by a factor of four compared to plate count. After sample filtration and incubation step, a universal lysis solution and bioluminescence reagent are automatically sprayed across the membrane. The membrane is then analyzed in a detection tower where light emission is captured by a charged coupled device camera. Data collected are treated, directly providing a result in colony-forming units. RMDS sensitivity is one cell and is equivalent to traditional microbiology. Rapid detection of bacteria, mixed bacteria and yeast was performed in various industrial samples. RMDS allowed rapid detection of contaminants in different simple and complex matrices such as water, tea, wine and mammalian cells. PRACTICAL APPLICATIONS The Milliflex® Rapid Microbiology Detection and Enumeration System (RMDS) is used to detect and enumerate microorganisms in filterable samples with time to detection in hours. The easy handling of this detection platform enables its use in all kinds of industries from food and beverage industries to biotechnology or pharmaceutical industries where procedures and method validation are stricter. One application is the use of RMDS for purified water testing and rinsing water. Rapid enumeration of contaminants will improve the quality control analysis of industrial products. Rapid release of samples will result in the optimization of manufacturing and product testing, allowing high throughput and simultaneous analysis during the process.

The role of the AcrAB-TolC pump in macrolide and ketolide susceptibility inEscherichia coliandEnterobacter aerogeneswas studied. Efflux pump inhibitor restored erythromycin, clarithromycin, and telithromycin susceptibilities to multidrug-resistant isolates. No modification of telithromycin accumulation was detected inE. aerogenes acrABortolCderivatives compared to that in the parental strain. Two independent efflux pumps, inhibited by phenylalanine arginine β-naphthylamide, expel macrolides and telithromycin inE. aerogenes.

Two clinical strains of Enterobacter aerogenes that exhibited phenotypes of multiresistance to β-lactam antibiotics, fluoroquinolones, chloramphenicol, tetracycline, and kanamycin were investigated. Both strains showed a porin pattern different from that of a susceptible strain, with a drastic reduction in the amount of the major porin but with an apparently conserved normal structure (size and immunogenicity), together with overproduction of two known outer membrane proteins, OmpX and LamB. In addition, the full-length O-polysaccharide phenotype was replaced by a semirough Ra phenotype. Moreover, in one isolate the intracellular accumulation of chloramphenicol was increased in the presence of the energy uncoupler carbonyl cyanide m -chlorophenylhydrazone, suggesting an energy-dependent efflux of chloramphenicol in this strain. The resistance strategies used by these isolates appear to be similar to that induced by stress in Escherichia coli cells.

We determined the sequence of the entire marRAB operon in Enterobacter aerogenes . It is functionally and structurally analogous to the Escherichia coli operon. The overexpression of E. aerogenes MarA induces a multidrug resistance phenotype in a susceptible strain, demonstrated by a noticeable resistance to various antibiotics, a decrease in immunodetected porins, and active efflux of norfloxacin.

Rapid microbial detection becomes increasingly essential to many companies in pharmaceutical, clinical and in food and beverage areas. Faster microbiological methods are required to contribute to a better control of raw materials as well as finished products. Rapid microbiological methods can also provide a better reactivity throughout the manufacturing process. Implementing rapid technologies would allow companies for cost saving and would speed up products release. Despite clear advantages, traditional methods are still widely used. Current methods require incubation of products in liquid or solid culture media for routinely 2 to 7 days before getting the contamination result. This necessary long incubation time is mainly due to the fact that stressed microorganisms found in complex matrices require several days to grow to visible colonies to be detected. Moreover, this incubation period can be increased up to 14 days in specific application like sterility testing for the release of pharmaceutical compounds. Although these techniques show advantages like simplicity, the use of inexpensive materials and their acceptability to the regulatory authorities, the major drawback is the length of time taken to get microbiological results. Thus, face to the growing demand for rapid detection methods, various alternative technologies have been developed. In the field of rapid microorganisms detection, ATPbioluminescence based on luciferine/luciferase reaction has shown great interest. Indeed, adenosine triphosphate (ATP) is found in all living organisms and is an excellent marker for viability and cellular contamination. Detection of ATP through ATP-luminescence technology is therefore a method of choice to replace traditional method and significantly shorten time to detection without loosing reliability.

Microbiological contamination of process waters is a current issue for pharmaceutical industries. Traditional methods require several days to obtain results; therefore, rapid microbiological methods are widely requested to shorten time-to-result. Milliflex Quantum was developed for the rapid detection and enumeration of microorganisms in filterable samples. It combines membrane filtration to universal fluorescent staining of viable microorganisms. This new alternative method was validated using European and United States Pharmacopeia definitions, with sterile water and/or sterile water artificially contaminated with microorganisms. The Milliflex Quantum method was demonstrated to be reliable, robust, specific, accurate, and linear over the whole range of assays following these guidelines. The Milliflex Quantum system was challenged to detect natural contaminants in different types of pharmaceutical purified process waters. Milliflex Quantum was demonstrated to detect accurately contaminants 3- to 7-fold faster than traditional membrane filtration method. The staining procedure is nondestructive allowing downstream identification following a positive result. The Milliflex Quantum offers a fast, sensitive, and robust alternative to the compendial membrane filtration method.

Multidrug resistance (MDR) in Enterobacter aerogenes can be mediated by induction of MarA, which is triggered by certain antibiotics and phenolic compounds. In this study, we identified the gene encoding RamA, a 113-amino-acid regulatory protein belonging to the AraC-XylS transcriptional activator family, in the Enterobacter aerogenes ATCC 13048 type strain and in a clinical multiresistant isolate. Overexpression of RamA induced an MDR phenotype in drug-susceptible Escherichia coli JM109 and E. aerogenes ATCC 13048, as demonstrated by 2- to 16-fold-increased resistance to β-lactams, tetracycline, chloramphenicol, and quinolones, a decrease in porin production, and increased production of AcrA, a component of the AcrAB-TolC drug efflux pump. We show that RamA enhances the transcription of the marRAB operon but is also able to induce an MDR phenotype in a mar -deleted strain. We demonstrate here that RamA is a transcriptional activator of the Mar regulon and is also a self-governing activator of the MDR cascade.

Imipenem is often used to treat intensive care unit patients infected by Enterobacter aerogenes, but it is leading to an increasing number of antibiotic resistant strains. Clinical isolates and imipenem resistant variants presented a high level of resistance to beta-lactam antibiotic group and to chemically unrelated drugs. We report here that imipenem selects strains which contain active efflux pumps ejecting various unrelated antibiotics including quinolones, tetracycline, and chloramphenicol. An increase of AcrA, an efflux pump component, was observed in the imipenem resistant variants. The overexpression of marA, involved in the genetic control of membrane permeability via porin and efflux pump expression, indicated the activation of the resistance genetic cascade in imipenem resistant variants.

The resistance phenotype of the clinical isolate of Escherichia coli 1941 was characterized by high-level resistance to penicillins and to combinations amoxicillin-ticarcillin/clavulanate and ampicillin/sulbactam. This resistance was carried by the conjugative plasmid pEC1941 that encoded a beta-lactamase activity. The purified enzyme focused at pI 5.4 and was strongly inhibited in vitro by clavulanic acid (IC50 = 0.09 microM). Nucleotide sequence analysis revealed identity between the plasmid borne blaTEM gene of E. coli 1941 and the blaTEM-1B gene, except for a single C-to-T substitution at position 32 in the promoter region leading to the overlapping promoters Pa and Pb. No alterations in the expression of outer membrane porins OmpC and OmpF have been detected. These findings show that the resistance of E. coli 1941 to the combinations of beta-lactams with beta-lactamase inhibitors is related to high-level production of TEM-1 enzyme expressed from the strong promoters Pa and Pb.

The ompX gene of Enterobacter aerogenes was cloned. Its overexpression induced a decrease in the major porin Omp36 production and consequently a β-lactam resistance was noted. Purified outer membrane protein X (OmpX) was reconstituted into artificial membranes and formed ion channels with a conductance of 20 pS in 1 M NaCl and a cationic selectivity. Both MarA expression and high osmolarity induced a noticeable increase of the OmpX synthesis in the E. aerogenes ATCC 13048 strain. In addition, OmpX synthesis increased under conditions in which the expression of the E. aerogenes major non-specific porins, Omp36 and Omp35, decreased.