Search

In the last years, the development of nano-formulations for cancer treatment represents one of the major challenges of the scientific research. The prodrug strategy, that combines chemotherapeutic agents with nanocarriers such as halloysite nanotubes (HNTs), is a promising strategy both to improve the biological activity of the drug molecules and to reduce the side effects of drugs. Herein we report the synthesis and characterization of a HNTs prodrug based on 1,2,3-triazole units covalently linked to HNTs external surface, bearing different positively charged moieties, which could present interesting pharmacological activities.

Clay minerals have been used for medical purposes from ancient times. Among them, the halloysite nanotube, an aluminosilicate of the kaolin group, is an emerging nanomaterial which possesses peculiar chemical characteristics. By means of suitable modifications, such as supramolecular functionalization or covalent modifications, it is possible to obtain novel nanomaterials with tunable properties for several applications. In this context the covalent grafting of suitable organic moieties on the external surface or in the halloysite lumen has been exploited to improve the loading and release of several biologically active molecules. The resulting hybrid nanomaterials have been applied as drug carrier and delivery systems, as fillers for hydrogels, in tissue regeneration and in the gene delivery field. Furthermore the loading and release of specific molecules have been also investigated for environmental purposes. This review summarizes the main developments in the halloysite modifications in the last 20 years with a particular attention to the development in the past two years.

LAPONITE® (Lap) clay mineral was successful functionalized by triazole groups in a two steps procedure. First, the Lap edges were modified with 3-azidopropyltrimethoxysilane by traditional heating and microwave irradiation. Microwave irradiation allowed us to obtain high loading onto the Lap edges in lower times compared to those obtained through conventional method. Afterwards, the triazole moieties were obtained by reaction between azido functionalized Lap and propargyl alcohol. The successful functionalization of Lap was proved by thermogravimetric analysis, FT-IR spectroscopy, dynamic light scattering and ζ-potential measurements. Finally, the effects of the surface modification on the gel formation ability of Lap were studied by gelation tests and the morphology of the gel phases was investigated by polarized optical microscopy measurements and diffusion experiments.

Halloysite-cyclodextrin hybrid was employed as carrier for sustained release of clotrimazole for vaginal or buccal treatment of Candidiasis. The nanocarrier was obtained by functionalization of halloysite surface with cyclodextrin moieties by means of microwave irradiation, with the final goal to obtain a scaffold for the covalent linkage of cysteamine hydrochloride. The interaction between clotrimazole and the pristine components, namely cyclodextrin and halloysite, was thoroughly investigated by several techniques such as DSC, TGA, UV–vis spectroscopy and some adsorption studies were, also, carried out. The release of the antifungine molecule was finally investigated in a medium that imitates the physiological conditions.

Clay minerals are considered one of the materials of the 20th century for their peculiar physico-chemical features. Among them, halloysite nanotubes (HNTs) are an emerging nanomaterial with a particular tubular structure that makes them a low cost and valuable alternative to the most common carbon nanotubes. Due to their tubular morphology, HNTs are employed in several fields acting as nanocontainers for different compounds for applications in drug carrier and delivery fields, catalysis, and as filler for polymeric matrices. The modification of HNTs’ surfaces allows to the synthesis of different nanoarchitectures that can improve the mechanical and thermal performance of polymer as well as they can enhance the use for the loading and release of chemicals. In this review, we summarize our recent results on halloysite functionalization, both supramolecular and covalent, and the application aforementioned fields.

Halloysite nanotubes (HNTs), clay minerals belonging to the kaolin groups, are emerging nanomaterials which have attracted the attention of the scientific community due to their interesting features, such as low-cost, availability and biocompatibility. In addition, their large surface area and tubular structure have led to HNTs’ application in different industrial purposes. This review reports a comprehensive overview of the historical background of HNT utilization in the last 20 years. In particular it will focus on the functionalization of the surfaces, both supramolecular and covalent, following applications in several fields, including biomedicine, environmental science and catalysis.

A new design for halloysite nanotube materials was obtained by grafting chemically modified cyclodextrin units onto the nanotube surface. In particular, grafted cyclodextrins were decorated with thiosaccharide pendants, in order to mimic the well-known binding of sugars to proteins and the glyco-cluster effect occurring during cellular recognition events. The obtained materials were characterized by using a combination of varied techniques (FT-IR spectroscopy, thermogravimetric analysis, scanning electron microscopy, dynamic light scattering, turbidimetry), and their potential drug-delivery abilities were tested by studying their interactions with the common naturally occurring anticancer agent curcumin. A suitable model describing the interaction between our materials and curcumin is proposed.

Water contamination is one of the main problems of modern society, and scientific research is continuously involved in identifying solutions able to preserve this valuable source. In this context, we characterized novel ionogels formed by organic salts with different anions. In particular, they show self-strengthening behavior, a quite unusual property for supramolecular gels, and they also exhibit a good load-bearing capacity. These ionogels are able to remove cationic dyes from wastewater. Thanks to their properties, they can be used in different apparatuses like dialysis membranes and as loading in adsorption columns. In the latter case over 95% removal is achieved in less than 10 min. Interestingly, soft materials can be reused for at least 20 cycles, partially regenerated, and reused for further 15 cycles. Comparison with data previously reported in the literature shows that this is a prerogative of this system and this represents not only an improvement but also a warranty of low raw material production after wastewater treatment.

The use of clay minerals as catalyst is renowned since ancient times. Among the different clays used for catalytic purposes, halloysite nanotubes (HNTs) represent valuable resources for industrial applications. This special tubular clay possesses high stability and biocompatibility, resistance against organic solvents, and most importantly be available in large amounts at a low cost. Therefore, HNTs can be efficiently used as catalysts themselves or supports for metal nanoparticles in several catalytic processes. This review reports a comprehensive overview of the relevant advances in the use of halloysite in catalysis, focusing the attention on the last five years.

A versatile catalyst based on halloysite and zinc oxide (HNT@ZnO) was prepared, for the first time, starting from ZnO commercial bulk form as Zn precursor source, in a one-pot procedure. This strategy gives the possibility to obtain small ZnO nanoparticles loaded on the HNT surface without the use of inorganic salts which envisage the removal of undesired anions and therefore a calcination process at high temperature. It was found that the presence of halloysite improved the UV–vis spectral absorption ability of ZnO. The hybrid was successful used as photocatalyst for the methylorange and rhodamine B degradation. In addition, after eight consecutive cycles for the methylorange photodegradation, the hybrid did not exhibit significant reduction in its photocatalytic performances confirming its stability. Based on trapping experiments and calculated energy bands we also proposed a photocatalytic mechanism. Furthermore, to evaluate the versatility of the synthetized HNT@ZnO hybrid, we used it as catalyst for biodiesel production from soybean oil, too. Also, in this case, the hybrid showed good catalytic performance and recyclability.

Bioimaging and in vivo imaging are cornerstone technologies in support of biomedical diagnosis. However, in some cases imaging methods have increased cancer risks for patients. Moreover, the most widely used diagnostic medical imaging technique, X-ray imaging, is the largest man-made source of radiation exposure to the general population. Thus, the research of new efficient and less invasive materials for imaging is quite urgent. Supramolecular hydrogels have recently proved to be promising biological carriers to load versatile bioimaging agents for in vitro or in vivo bioimaging, thanks to the ability to undergo reversible swelling and gel–sol transition in response to various physiological stimuli. In addition, the biodegradability and biocompatibility allowed the use of supramolecular gels also for cancer diagnosis, as they can be facilely endocytosed into cells [1]. Remembering the good biological response of some imidazolium derived hydrogels [2], fluorescent imidazolium organic salts, that should own the double function of gelator and bioimaging agent, have been synthesized. New fluorescent hydrogels with interesting physico-chemical properties (rheology, gel-sol temperature transition and optical properties) have been tested for anti-proliferative activity, in vitro bioimaging on cancer cells and controlled release of gelator in physiological medium. Results evidence how these hydrogels can be potentially investigated as new theranostic media for anticancer research

The synthesis of photoluminescent nanomaterials based on halloysite nanotubes is described. The obtained hybrid was characterized by means of TGA, FT-IR, DLS and XPS measurements; in addition its morphology was imaged by TEM and HR-TEM. The HNT hybrid also exhibited photoluminescent properties, both in solution and in the solid state, and white-light emission (0.24, 0.36; CIE coordinates) was observed. This work could be pioneering as a new strategy for manufacturing both LEDs and fluorescent tags based on HNT nanomaterials. © 2018 The Royal Society of Chemistry.

We studied how changing the anion affects the self-assembly of three diimidazolium salts bearing a perylene bisimide spacer. In particular we used [BF 4 − ] and [NTf 2 − ] based salts together with a mixed salt bearing both [I − ] and [BF 4 − ] anions. Thermal as well as concentration and temperature dependent spectroscopic investigations revealed that changing the anion impacts on solid state and solution aggregation, leading to articulate thermotropic behaviors and contrasting solvent effects, respectively. We also studied the electrochemical behavior of the salts to verify if changing the anion alters the redox properties of the salts. Finally, different anions also lead to very different aggregate morphologies, as evidenced by SEM and TEM measurements.

Hybrid diimidazolium-based ionogels were obtained by dispersing nitrogen-doped carbon nanodots (NCNDs) in ionic liquid (IL) solutions and by using dicationic organic salts as gelators. The properties of the NCND-ionogels were studied in terms of thermal stability, mechanical strength, morphology, rheological, and microscopic analyses. Insights into the formation of the hybrid soft material were attained from kinetics of sol-gel phase transition and from estimating the size of the aggregates, obtained from opacity and resonance light-scattering measurements. We demonstrate that, on one hand, NCNDs were able to favor the gel formation both in the presence of gelating and nongelating ILs. On the other hand, the gelatinous matrix retains and, in some cases, improves the properties of NCNDs. The NCND-ionogels showed the typical fluorescence emission of the carbon dots and a notable antiradical activity, with higher efficiency as compared to the single components. The presented hybrid materials hold great promise for topical applications in antioxidant fields.

Halloysite (HNT) is a promising natural nanosized tubular clay mineral that has many important uses in different industrial fields. It is naturally occurring, biocompatible, and available in thousands of tons at low cost. As a consequence of a hollow cavity, HNT is mainly used as nanocontainer for the controlled release of several chemicals. Chemical modification of both surfaces (inner lumen and outer surface) is a strategy to tune the nanotube's properties. Specifically, chemical modification of HNT surfaces generates a nanoarchitecture with targeted affinity through outer surface functionalization and drug transport ability from functionalization of the nanotube lumen. The primary focus of this review is the research of modified halloysite nanotubes and their applications in biological and medical fields.

Insights are provided into the properties of molecular gels formed by diimidazolium salts both in “normal” solvents and ionic liquids. These materials can be interesting for applications in green and sustainable chemistry in which ionic liquids play a significant role, like catalysis and energy. In particular, two positional isomers of a diimidazolium cation have been examined with a wide range of anions for their ability to form gel phases. In particular, di-, tri-, and tetravalent anions bearing aliphatic or aromatic spacers were paired with the divalent cations. The properties of the organo- and ionogels formed have been analyzed by means of several different techniques, including calorimetry, rheology, resonance light scattering, UV/Vis absorption, polarizing optical microscopy, and powder X-ray diffraction measurements. The investigations performed enabled us to obtain a wide range of conductive materials characterized by a high thermal stability and a low corrosiveness of the gelator (organogels) or of both gelator and solvent (ionogels). The information gained should be useful in the broader quest to identify and promote their applications.

Hybrid materials based on halloysite nanotubes (HNT) and cucurbit[8]uril (CB[8]) were prepared with the aim to obtain efficient nanosponges towards hydrocarbons both in liquid and vapor phases. The loading on both HNT surfaces and the hybrid morphology were evidenced by FTIR spectroscopy, thermogravimetric analysis and scanning electron microscopy. In order to highlight the interactions in the hybrid 13C {1H} CP-MAS NMR experiments were performed. The aqueous colloidal stability of HNT/CB[8] was highlighted through ζ potential and dynamic light scattering measurements. The HNT/CB[8] composite was employed as nanosponge to capture aromatic oils in aqueous phase as evidenced by fluorescence emission spectra of pyrene. These results were correlated with the adsorption capacity of the hybrid toward toluene in vapor phase. This paper provides an efficient way to prepare a biocompatible hybrid material that could be used as a potential multi-pockets nano-container for decontamination of polluted water and/or air.

A thermo-responsive polymer such as poly(N-isopropylacrylamide) (PNIPAAM) was covalently grafted on the external surface of halloysite nanotubes (HNTs) by means of microwave irradiation. This nanomaterial was used as a support and stabilizer for palladium nanoparticles. The obtained HNT–PNIPAAM/PdNPs was characterized by means of TGA, SEM, EDS and TEM analyses. The palladium content of the catalyst was estimated to be 0.4 wt%. The stability of the catalytic material at different temperatures (below and above the PNIPAAM lower critical solution temperature) was tested in the Suzuki reaction under microwave irradiation. In addition, TEM analysis after five consecutive runs was performed. The catalyst showed a good catalytic activity toward the Suzuki cross-coupling reaction between phenylboronic acid and several aryl halides in aqueous media under microwave irradiation and low palladium loading (0.016 mol%, 8 mg of Pd). Turnover numbers (TONs) and frequencies (TOFs) up to 6250 and 37 500 h1, respectively, were reached. The catalyst was easily separated from the reaction mixture by centrifugation and reused for five consecutive cycles with a small drop in its catalytic activity.

Searching for new fluorescent organic salts to be used in biomedical and electrochemical field, we conjugated properties of imidazolium salts with the ones of naphthalene diimide core and we obtained some N,N′-bis-(1-alkyl-3-propylimidazolium)naphthalene diimide diiodides. We took into account alkyl chains going from hexyl to dodecyl, as well as hydrogenated and fluorinated alkyl tails. After determination of their thermal behaviour by differential scanning calorimetry, concentration-, and temperature-dependent spectroscopic studies (UV-vis and fluorescence) were performed evidencing the occurrence of isodesmic and enthalpy-driven self-assembly processes. Properties of aggregates were also investigated in the solid state by fluorescence spectroscopy and scanning electron microscopy (SEM). Information obtained evidenced the formation of H-aggregates that are organized in spherical or disk-like structures.

Mixed cyclodextrin–calixarene nanosponges were used to prepare some composites with the well known polyphenolic bioactive compounds quercetin and silibinin. The composites were characterized by means of different techniques (UV-vis, FT-IR, microcalorimetry, thermogravimetry), in order to assess their loading and thermal stability. The kinetics of release of the bioactive molecules into aqueous solution were studied at two different pH values (1.0, 6.4), which mimic typical physiological conditions. Finally the possible antiproliferative effects in vitro were assayed towards three triple negative breast cancer cell lines (SUM 149, SUM 159 and MDA-MB-23). Our results point out the role assumed by the triazole linkers, present in the nanosponge network, in affecting both the adsorption abilities of the materials towards the bioactive molecules, and the antiproliferative activity of the composites. This work puts forward an efficient strategy to prepare nanosponge based nanocarriers with three different cavities that could encapsulate two or more drug molecules with different physico-chemical properties.

The catalytic ability of some functionalised diimidazolium ionic liquids was tested using the Michael addition of malononitrile to t-chalcone as probe reaction. Diimidazolium salts characterized by the presence of 1-(1-imidazolylmethyl)-3,5-di-[1-(3-octylimidazolylmethyl)]benzene cation and differing in the anion structure were used. Both mono- and dianions were employed and among these some chiral anions generally used as organocatalysts were taken into account. Data collected were analysed both as function of ionic liquids structure and basicity, evaluated using the Hammett basicity function. Although the use of chiral anions did not allow performing a stereochemical control of the reaction, data collected demonstrate the high catalytic ability of the functionalised salts. Indeed, high conversions and yields were obtained under mild conditions and in significantly shorter reaction times with respect to the ones so far reported for this reaction.

Environmental friendly halloysite-dicationic triazolium salts (second generation) obtained by subsequent click reactions of a diyne derivative in the presence of 2-azidopropyl-modified halloysite nanotubes, were used as supports for palladium catalyst. Thanks to the high triazolium loading (25%) these materials were able to support higher amount of the metal than that on the monocationic derivative (first generation). Such materials were characterized by thermogravimetric analysis, FT-IR spectroscopy and SEM investigations. The new catalytic system was employed in the ligand free Suzuki cross-coupling under microwave irradiation. A set of solvent, time and% loading of palladium was screened. The palladium catalyst displayed good activity allowing the synthesis of several biphenyl in high yields working with only 0.1 mol% of palladium loading at 120 °C in water, for an irradiation time of 10 min. The second generation catalyst, also, showed good recyclability without any loss in activity and negligible palladium leaching that are significant improvements over the first generation triazolium catalyst.

Silver nanoparticles stabilized by means of poly -(6- N , N -dimethyl-propylenediamino)-(6-deoxy)-β-cyclodextrin were synthesized, characterized by different techniques (UV–vis spectroscopy, Dynamic Light Scattering, High Resolution Transmission Electron Microscopy, Fourier-transform IR Spectroscopy) and used as catalysts for the reduction of various nitrobenzene derivatives with sodium borohydride. The nanocomposites obtained appear to have an organized structure, with a metal core surrounded by a layer-structured coating shell. Kinetic data, rationalized in terms of a modified Langmuir–Hinshelwood model, evidenced a non-linear dependence of the reaction rate on the concentration of the catalyst. This was explained on the grounds of the catalytic activity of differently covered catalyst areas. Careful analysis of kinetic data, in particular the effect of the para substituent on the nitroarene structure and the trends of the induction period observed at the beginning of the reaction, provided with interesting insights on the reaction course, and brought us to critically reconsider several mechanistic ideas reported in previous literature.

The grafting of poly(N-isopropylacrylamide) (PNIPAAM) onto the halloysite external surface is proposed in order to obtain a novel thermoresponsive drug carrier for curcumin delivery. The new nanomaterial is characterized by means of FT-IR spectroscopy, thermogravimetric analysis, and SEM investigations. A high density of polymer chain was achieved at the nanoparticle surface. The PNIPAAM dehydration phenomenon was observed in water above 32 °C that is nearly coincident with the lower critical solution temperature for the polymer. The colloidal stability as well as the wettability of the obtained nanomaterial may be triggered by temperature stimuli. In vitro tests simulating the gastro-intestinal transit demonstrated that the proposed delivery system allows a targeted release of curcumin, preventing its degradation in an acidic medium. We synthesized a new hybrid nanoparticle that is very promising for several applications due to the copresence of a biocompatible region, to the temperature response, and to the hollow cavity, which can load active species.

Diimidazolium-based organic salts, bearing peptides or amino acids as anions have been synthesised and tested for their gelling ability in biocompatible solvents. These low molecular weight salts were successfully used as gelators in phosphate buffered saline (PBS) solution and ionic liquids. Then, the properties of the obtained soft materials were analysed in terms of melting temperature and gel strength as accounted for by rheological investigations. The gel-phase formation was studied by using UV/Vis and resonance light scattering measurements, whereas the morphology of the soft materials was analysed by using polarised optical microscopy and scanning electron microscopy. To get information about the organisation of the gelator in the gelatinous matrix, X-ray diffraction measurements were performed both on the neat gelators and their gels. The results collected show that the properties of the gel phases, like the thermal stability, the self-repairing ability, the resistance to flow as well as the morphology, are dependent on the nature of the anion. Furthermore, bioassays revealed that the obtained diimidazolium organic salts possessed antimicrobial activity, against gram-negative and gram-positive tester strains. In particular and noteworthy, the diimidazolium organic salts exert a bactericidal capability, which was retained even if they are included in the gel phase. Thus, a novel kind of bioactive soft material was obtained that could be fruitfully employed as a non-covalent coating exerting antibacterial capability.

Halloysite nanotubes (HNTs) are clay minerals with a hollow nanotubular structure. There is growing interest in these nanomaterials, due to their biocompatibility, potential applications and availability. The surface chemistry of HNTs is versatile for the targeted chemical modification of the inner lumen and outer surface. Functionalized halloysite constitutes a valuable support for metal nanoparticles, promoting catalytic applications with tunable properties. The peculiar tubular shape of HNTs favors the dispersion and surface availability of the supported metal nanoparticles that are active in the catalytic path. Moreover, the presence of an empty lumen opens new perspectives for the production of nanoarchitectures with synergistic catalytic effects, due to the increase in local concentrations and confinement. The main focus of this review is the research on modified halloysite nanotubes for the preparation of valuable supports for metal nanoparticles and their applications in catalytic processes.

Diimidazolium and dipyrrolidinium organic salts were tested for their ability to gel both organic solvents and ionic liquids. Organic salts containing 1-(1-imidazolylmethyl)-3,5-di-(3'-octylimidazolylmethyl)-benzene and 1-(N-pyrrolidylmethyl)-3,5-di-(N,N-octylpyrrolidylmethyl)-benzene cations were used. In addition to the simple bromide anion, also dianions having a naphthalene core such as 1,5- and 2,6-naphthalenedisulfonate and 2,6-naphthalenedicarboxylate were taken into account. Gelation tests demonstrated that organic salts used were able to harden ionic liquids. The materials obtained were investigated for their thermal stability and also for electric conductivity properties using micro-DSC and dielectric spectroscopy. Furthermore, the opacity of some gel phases was monitored using UV-vis measurements. To obtain information about the gelation mechanism, gel phase formation was studied as a function of time by means of resonance light scattering investigation. Finally, the ability of materials to respond to external stimuli such as magnetic stirring or ultrasound irradiation was also analyzed. Data collected show that different relationships exist among the gelator and the ionic liquid structure, determining the properties of materials and their possible applications.

Nine functionalized dicationic ionic liquids were used to study the base catalyzed mononuclear rearrangement of (Z)-phenylhydrazone of 3-benzoyl-5-phenyl-1,2,4-oxadiazole into the corresponding triazole at 363 K. Ionic liquids were characterized by the presence of 1-(1-imidazolylmethyl)-3,5-di[1-(3'-octylimidazolylmethyl)]benzene cation, bearing on the structure a neutral imidazole unit as basic functionality. Besides anions generally used for monocationic ionic liquids, such as [Br(-)], [BF4(-)], and [NTf2(-)], also dianions having a rigid aromatic spacer such as 1,4-benzenedicarboxylate, 2,6-naphthalenedicarboxylate, and 1,5- and 2,6-naphthalenedisulfonate were taken into account. Furthermore, to have information about the effect deriving from the spacer rigidity also dianions such as 1,4-butanedicarboxylate and 1,6-hexanedicarboxylate were used. The basic strength of dicationic ionic liquids was determined using the Hammett indicator method. Data collected gave evidence that the outcome of the target reaction was affected by the nature of interactions operating between cation and anion of the ionic liquid used. Quite interestingly, solvent systems used had a good recyclability. Indeed, in some cases, they were reused for four cycles without significant loss in yield.

The conversion of carbohydrates into 5-hydroxymethylfurfural (5-HMF) has been studied in binary mixtures of ionic liquids (ILs), using strongly acidic resin Amberlyst 15 as the catalyst. In particular, both mono- and disaccharides, such as fructose, glucose and sucrose have been investigated. Considering the favorable effect exerted by chloride-based ionic liquids in the dissolution of carbohydrates, we used binary mixtures of 1-butyl-3-methylimidazolium chloride ([bmim][Cl]) with [bmim + ] based ionic liquids differing in size, shape and coordination ability of the anion ([bmim][BF 4 ], [bmim][N(CF 3 SO 2 ) 2 ], [bmim][N(CN) 2 ], [bmim][SbF 6 ] and [bmim][CF 3 SO 3 ]). Carbohydrate conversion in [bmim][BF 4 ]/[bmim][Cl] binary mixtures, has been studied under both magnetic stirring and ultrasound (US) activation. The catalytic system used led to the formation of 5-hydroxymethylfurfural in good yield under mild conditions. A significant influence of IL binary mixture composition on the outcome of the target processes was evidenced. Improvements in both reaction time and temperature have been observed, under US activation.

Two polystyrene-supported and six homogeneous MacMillan imidazolidinone catalysts were prepared and tested for the asymmetric α-alkylation of propanal with benzodithiolylium tetrafluoroborate. The chiral imidazolidinone was linked to polystyrene through the N-3 atom or through the phenyl ring and their catalytic activity was compared with that of their unsupported precursors. This comparison has allowed us to find an unsupported catalyst that displays high catalytic activity down to 5 or 2 mol % at room temperature with a high level of enantioselectivity also when used with hexanal and 3-phenylpropanal. In addition, one of the heterogeneous materials was revealed to be highly recyclable for at least eight cycles with no loss in efficiency working at the same levels of activity and enantioselectivity as the unsupported counterpart.

During recent years growing interest has been devoted to the synthesis and applications of polycationic organic salts. Among them, di- and tricationic organic salts can be considered the natural evolution of monocationic ones. These last have given rise to the large class of ionic liquids. In the cases of di- and tricationic organic salts, the potential to change their structural features simply by varying the properties either of the charged heads or of the spacers separating them provides the opportunity to obtain materials suitable for different applications. This review article highlights recent progress in the study of the properties of di- and tricationic organic salts, as well as in some of their uses as solvent systems, receptors for anion recognition, ionic liquid crystals, low-molecular-weight gelators, additives for dye-sensitized solar cells, and so on.

A new catalytic system based on modified halloysite nanotubes was employed in the Suzuki reaction under microwave irradiation. A set of solvents, times and bases was screened and the best experimental conditions were obtained when the reactions were carried out for 10 min in water–ethanol at 120 °C in presence of K2CO3 as base. Good recyclability was observed. The new catalytic system was employed using either 1 mol% or 0.1 mol%. The palladium catalyst displayed good activity, allowing the synthesis of several biphenyl compounds in high yield working with only 0.1 mol% palladium loading. The application of microwave irradiation decreased the reaction time and also improved conversion with respect to traditional heating. Copyright © 2014 John Wiley & Sons, Ltd.

Hyper-reticulated co-polymers jointly formed by cyclodextrin and calixarene units, which can be considered as a new class of nanosponges, were easily obtained by means of a click chemistry approach. In particular, we succeeded in preparing our materials by exploiting the copper-catalyzed 1,3-dipolar cycloaddition (CuAAC) reaction between heptakis-(6-deoxy)-(6-azido)-beta-cyclodextrin and (5,11,17,23-tetra-tert-butyl)-(25,26,27,28-tetra-propargyloxy)-calix-[4]-arene, mixed in different proportions. These materials were fully characterized by means of combined FT-IR, thermogravimetric, C-13 {H-1} CP-MAS NMR and nitrogen adsorption/desorption techniques. In particular, C-13 {H-1} CP-MAS spectra allowed us to perform a quantitative analysis of the co-polymers obtained. Tests on their possible sequestering abilities towards some organic molecules, in particular nitroarenes and commercial dyes chosen as suitable pollutants or drug models, were successfully carried out. Results obtained point out that absorption abilities seem affected by polymer composition and porosity as well.

The anion recognition ability of the dicationic imidazolium salt 3,3′-di-n-octyl-1,1′- (1,3-phenylenedimethylene)diimidazolium 1,5-naphthalenedisulfonate ([m-Xyl-(oim)2][1,5-NDS]) was investigated in acetonitrile solution by means of proton NMR titrations. A wide range of anions, comprising simple inorganic ions, halides, and mono- and dicarboxylates was taken into account. The study showed that this receptor binds carboxylate anions more strongly than halides. Moreover [m- Xyl-(oim)2][1,5-NDS] displays selectivity for di- over monocarboxylate anions. The complex stability was mainly affected by the anion basicity in the presence of monocarboxylates, whereas the flexibility of the alkyl chain linking the two carboxylate moieties appeared to play a major role in the presence of dicarboxylate anions.

Biocompatible Ag nanocomposites were prepared by photoreduction of ammoniacal silver acetate in the presence of a polyaminocyclodextrin, namely the poly-{6-[3-(2-(3-aminopropylamino)-ethylamino)-propylamino]}-(6-deoxy)-b-CD (amCD, figure 1). The obtained Ag-amCD systems, which possess an oniontype structure [1] with a metal core surrounded by several layers of the capping agent, were characterized by means of various complementary techniques. In particular, FT-IR spectroscopy confirmed the presence of the amCD scaffold in the composite, and evidenced a partial oxidative degradation of the polyamine branches,due to the fact that these groups function as sacrificial reducing agents in the photoinduced process of formation of the Ag metal core. TEM and SAED micrographs evidenced that the Ag cores possess a relatively low polydispersity and a significantly crystalline character.Then, in consideration of the well-known antimicrobial activityof nanosized silver, our Ag-amCD systems were assayed for antibacterial activity, quantified as the minimal concentration inhibiting at least the 90% of bacterial growth (MIC90), using Escherichia coli and Kocuria rhizophila as Gram-negative and Gram-positive tester strains. This analysis revealed 5 and 1 μg/ml as MIC90 values against E. coli and K. rhizophila; respectively. In addition, thanks to their peculiar features, the systems function as potential supramolecular drug carriers, effectively able to bind the b-lactam antibiotic Ampicillin (amp, figure 2) as demonstrated by polarimetric measurements. Antimicrobial assays reveals a five-fold improved activity of Ag-amCD-amp probablydue to synergistic action of Agnanoparticles and amp. This studyprovides insights on the attractive possibility to use an environmentally-friendly methodology to produce bioactive supramolecular systemstobeemployedaspowerful andtunableantimicrobial agents. [1] M. Russo, F. Armetta, S. Riela, D. Chillura Martino, P. Lo Meo, R. Noto J. Mol. Cat. A 408 (2015) 250-261.

An array of diimidazolium salts has been synthesized and used to investigate their anti-microbial and anti-proliferative activities. In particular, salts based on the 3,30-di-n-alkyl-1,10-(1,n-phenylenedimethylene)- diimidazolium cation and differing in the alkyl chain length on the imidazolium ion, the isomeric substitution on the aromatic spacer and in the anion nature were used. The anti-proliferative activity was evaluated against cervical (HeLa), colon adenocarcinoma (HT-29) and breast (SKBR3) cancer cell lines. In the latter case, also a morphological assessment after treatment with salts was performed. All salts were tested for their hemolytic activity against human erythrocytes. On the other hand, the anti-microbial activity was investigated using both Gram-negative (Escherichia coli) and Gram-positive (Kokuria rhizophila, Staphilococcus aureus and Bacillus subtilis) strains. On the whole, the data collected demonstrate that biological activity is the result of the combined action of both cation and anion structures. In general, the cation hydrophobicity plays the most significant role with structural features of the anion becoming more relevant in the presence of a shorter alkyl chain on the cationic head.

Inorganic-organic nanosponge hybrids based on halloysite clay and organic cyclodextrin derivatives (HNT-CDs) were developed by means of microwave irradiations in solvent-free conditions. The HNT-CDs nanomaterials characterized by FT-IR, TGA, BET, TEM, SEM, DLS, and zeta-potential have showed a hyper-reticulated network which possesses both HNT and cyclodextrin peculiarities. The new HNT-CDs nanosponge hybrids were employed as nanoadsorbents, first choosing Rhodamine B as the dye model, and furthermore for the removal of some cationic and anionic dyes, under different pH values (1.0, 4.54, and 7.4). The collected results showed that the pH solution as well as the electrostatic interactions affect the adsorption process. Factors controlling the adsorption process were discussed. The experimental adsorption equilibrium and kinetic data were best described by the Freundlich isotherm model. Excellent adsorption efficiency for cationic dyes were observed with respect to anionic ones. The results suggest that HNT-CDs nanosponge hybrids are a good nanoadsorbent for selective adsorption of cationic dyes with respect to the anionic ones from aqueous solutions.

L’allosite (HNT) è un interessante materiale argilloso allumino-silicato naturale, non tossico e biocompatibile, con la caratteristica forma tubolare cava dotata di parziale carica positiva interna e negativa esterna.Combinando le peculiarità di un composto organico con le proprietà di un materiale inorganico, è possibile ottenere sistemi ibridi organici–inorganici con interessanti proprietà e vasti campi di applicazione. Sono un esempio delle “nanospugne” capaci di adsorbire efficacemente potenziali inquinanti. In questo contesto sono stati preparati, dei materiali ibridi “spugna” costituiti da unità ciclodestriniche e allosite e ancora un sistema ibrido HNT-Cucurbit[8]uril. Il primo possiede una struttura altamente ramificata e mostra interessanti capacità di assorbimento di coloranti organici con proprietà modulabili in funzione di pH e temperatura, il secondo è stato dimostrato possedere una spiccata attività di adsorbimento di toluene e pirene.

Long chain phosphate esters bearing at least one or two aryl groups have been synthesized and used for the preparation of stable multi-walled carbon nanotube (MWCNT) hybrids. The non-covalent interaction ester/MWCNT has been investigated by several techniques (SEM, UV-vis, 31P-NMR, RAMAN). The used phosphate ester derivatives demonstrated the ability to produce an excellent dispersion of MWCNT in CHCl3. The obtained dispersions showed a great stability from one to at least three weeks in the range of concentration considered. Thermal analysis showed an increase in the decomposition temperature for the hybrids with respect to pristine MWCNT.

A dual drug-loaded HNT–CD glycocluster delivery system based on halloysite nanotubes and carbohydrate functionalized cyclodextrin was developed by a green protocol using solvent-free microwave irradiation. The nanohybrid was employed for concurrent load and release of silibinin and curcumin. The new delivery system was characterized by means of TGA, FT-IR spectroscopy, SEM and DLS. These techniques confirm the successful loading of the two drugs in the system. SEM and DLS measurements highlighted that the nanomaterial preserves a tubular structure with an average hydrodynamic radius of ca. 200 nm. The release of the drugs from the HNT glycocluster was investigated by means of UV-vis spectroscopy at two different pH values simulanting the typical physiological conditions of either gastric or intestinal fluids. Enzyme-linked lectin assays (ELLA) demonstrated that highly mannoside–cyclodextrins HNT entities display high affinity towards mannose selective ConA lectin. Biological assays showed that the new drug delivery system exhibits anti-proliferative activity against the investigated cell lines. Fluorescence microscopy confirmed ELLA results and it showed a high propensity of this drug delivery system to cross cell membranes and to penetrate into the cell nucleus. The results revealed that the synthesized multicavity system is a material of suitable size and nanoarchitecture to transport drugs into living cells. Spanish Ministerio de Economia y Competitividad (SAF2013-44021-R)

The growing interest in the properties and applications of ionic liquids has recently led to research into the possibility of using their binary mixtures. This work reports on the effects of binary mixtures of ionic liquids on the outcome of organic reactions such as the mononuclear rearrangement of heterocycles and the solvatochromic behavior of Nile Red. Binary mixtures formed by ionic liquids differing in the structure of the cation and the anion are taken into account. In particular, ionic liquids such as 1-benzyl-3- butylimidazolium bis(trifluoromethanesulfonyl)imide, 1-(2,3,4,5,6- pentafluorobenzyl)-3-butylimidazolium bis(trifluoromethanesulfonyl)imide, and 1-benzyl-3-butylimidazolium tetrafluoroborate, are studied. To achieve a deep understanding of the properties of ionic-liquid binary mixtures, their three-dimensional organization was analyzed by a combination of resonance light scattering, UV/Vis spectroscopy, and 1H and 19F NMR spectroscopy. Data collected herein evidence that the most significant changes in the ionic lattice structure, and consequently the most pronounced effects exerted as solvent media, occur when the studied system involves a blend of different anions. Mixing two ionic liquids (ILs) affects the outcome of reactions such as mononuclear rearrangement of a heterocycle (MRH) and solvatochromism of Nile Red. Greater changes in the ionic lattice are found when an IL mixture contains different anions.

Asymmetric organocatalysis is now recognized as the third pillar of asymmetric synthesis. Recent years have witnessed increasing interest towards the use of highly active and stereoselective organocatalysts. This critical review documents the advances in the development of chiral organocatalysts which are systematically used in ≤3 mol% loading in all the sub-areas of the field, namely aminocatalysis, Brønsted acids and bases, Lewis acids and bases, hydrogen bond-mediated catalysis, phase transfer and N-heterocyclic carbene catalyses (194 references).

The combined effect of ultrasounds and ionic liquids was used to perform the synthesis of aryl azides by nucleophilic aromatic substitution in ionic liquid/[1-butyl-3-methylimidazolium][N 3 ] binary mixtures. The ultrasounds efficiency was analyzed as a function of the substrate and of the ionic liquid structure. In the first case, both 6π and 10π electrons aryl halides were considered. As far as the ionic liquid structure is concerned, both aromatic and aliphatic ionic liquids were taken into account. Among aromatic cations, the effects due to different ability in giving hydrogen bond or π–π interactions were considered. The use of a geminal ionic liquid having an aromatic spacer was examined too. On the whole, collected data evidence an activating effect on the target reaction by the combined use of ultrasounds and ionic liquids. The structural order degree of the ionic liquid seems to be the main factor affecting the ultrasounds efficiency. Furthermore, the effects due to changes in the anion structure seem to be more significant than those due to changes in the cation structure.

Three different resin-supported catalysts have been prepared by using the well established post-modification approach by means of thiol-ene coupling reaction. Two catalysts were tested for the first time in the asymmetric α-selenenylation of propanal, while the third catalyst was used in the Michael addition reaction. While the preliminary results are not encouraging in the case of supported Jorgensen’ catalyst, interesting data have been collected with both for the supported MacMillan and prolyl-prolinol catalysts. In fact, these catalysts displayed good activity and selectivity. A reversed enantioselectivity in the α-selenenylation was observed by changing the polarity of the solvent. Finally, these materials were easily recovered, and used four and five times, respectively.

The reaction between an excess of 1,4-bis(3-vinylimidazolium-1-yl) bromide and a mercaptopropyl-modified amorphous silica gel or ordered mesoporous silica SBA-15 in the presence of azobisisobutyronitrile (AIBN) afforded new materials, which have a high loading of imidazolium moieties. These materials, which contain a highly cross-linked polymeric network, have been denoted as multi-layered, covalently supported ionic liquid phase (mlc-SILP) and have been used as support for palladium catalysts containing a high loading of the metal (10 wt%). Such materials were characterized by several techniques (13C magic angle spinning nuclear magnetic resonance, the Brunauer–Emmett–Teller technique, small-angle X-ray scattering, X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy). The presence of a homogeneous distribution of palladium nanoparticles was established. The palladium catalysts displayed good activity allowing the synthesis of several biphenyl compounds in high yields working with only 0.1 mol% of palladium loading at mild temperatures (room temperature or 50 °C) in ethanol/water. Reactions carried out on a 10-mmol scale required only 10 mg of catalysts. Good recyclability was observed.