Search

Efficient spin injection from epitaxial ferrimagnetic NiFe$_2$O$_4$ thin films into a Pd layer is demonstrated via spin Seebeck effect measurements in the longitudinal geometry. The NiFe$_2$O$_4$ films (60 nm to 1 $\mu$m) are grown by pulsed laser deposition on isostructural spinel MgAl$_2$O$_4$, MgGa$_2$O$_4$, and CoGa$_2$O$_4$ substrates with lattice mismatch varying between 3.2% and 0.2%. For the thinner films ($\leq$ 330 nm), an increase in the spin Seebeck voltage is observed with decreasing lattice mismatch, which correlates well with a decrease in the Gilbert damping parameter as determined from ferromagnetic resonance measurements. High resolution transmission electron microscopy studies indicate substantial decrease of antiphase boundary and interface defects that cause strain-relaxation, i.e., misfit dislocations, in the films with decreasing lattice mismatch. This highlights the importance of reducing structural defects in spinel ferrites for efficient spin injection. It is further shown that angle-dependent spin Seebeck effect measurements provide a qualitative method to probe for in-plane magnetic anisotropies present in the films., Comment: 18 pages, 6 figures

Thin electrodes of magnetic tunnel junctions can show superparamagnetism at surprisingly low temperature. We analysed their thermally induced switching for varying temperature, magnetic and electric field. Although the dwell times follow an Arrhenius law, they are orders of magnitude too small compared to a model of single domain activation. Including entropic effects removes this inconsistency and leads to a magnetic activation volume much smaller than that of the electrode. Comparing data for varying barrier thickness then allows to separate the impact of Zeman energy, spin-transfer-torque and voltage induced anisotropy change on the dwell times. Based on these results, we demonstrate a tuning of the switching rates by combining magnetic and electric fields, which opens a path for their application in noisy neural networks.

The rising field of spin caloritronics focuses on the interactions between spin and heat currents in a magnetic material; the observation of the spin Seebeck effect opened the route to this branch of research. This paper reports the results of a round robin test performed by five partners on a single device highlighting the reproducibility problems related to the measurements of the spin Seebeck coefficient, the quantity that describes the strength of the spin Seebeck effect. This work stimulated the search for more reproducible measurement methods through the analysis of the systematic effects., Comment: PDFLaTeX, 8 pages, 8 figures

The determination of the longitudinal spin Seebeck effect (LSSE) coefficient is currently plagued by a large uncertainty due to the poor reproducibility of the experimental conditions used in its measurement. In this work we present a detailed analysis of two different methods used for the determination of the LSSE coefficient. We have performed LSSE experiments in different laboratories, by using different setups and employing both the temperature difference method and the heat flux method. We found that the lack of reproducibility can be mainly attributed to the thermal contact resistance between the sample and the thermal baths which generate the temperature gradient. Due to the variation of the thermal resistance, we found that the scaling of the LSSE voltage to the heat flux through the sample rather than to the temperature difference across the sample greatly reduces the uncertainty. The characteristics of a single YIG/Pt LSSE device obtained with two different setups was $(1.143\pm0.007)\cdot 10^{-7}$ Vm/W and $(1.101\pm0.015)\cdot 10^{-7}$ Vm/W with the heat flux method and $(2.313\pm0.017)\cdot 10^{-7}$ V/K and $(4.956\pm0.005)\cdot 10^{-7}$ V/K with the temperature difference method. This shows that systematic errors can be considerably reduced with the heat flux method., Comment: PDFLaTeX, 10 pages, 6 figures

We report magnon spin transport in nickel ferrite (NiFe$_2$O$_4$, NFO)/ platinum (Pt) bilayer systems at room temperature. A nonlocal geometry is employed, where the magnons are excited by the spin Hall effect or by the Joule heating induced spin Seebeck effect at the Pt injector, and detected at a certain distance away by the inverse spin Hall effect at the Pt detector. The dependence of the nonlocal magnon spin signals as a function of the magnetic field is closely related to the NFO magnetization behavior. In contrast, we observe that the magnetoresistance measured locally at the Pt injector does not show a clear relation with the average NFO magnetization. We estimate the magnon spin relaxation length to be 3.1 $\pm$ 0.2 $\mu$m in the investigated NFO samples., Comment: 6 pages, 4 figures

We study the underlying chemical, electronic and magnetic properties of a number of magnetite based thin films. The main focus is placed onto NiO/Fe$_3$O$_4$(001) bilayers grown on MgO(001) and Nb-SrTiO$_3$(001) substrates. We compare the results with those obtained on pure Fe$_3$O$_4$(001) thin films. It is found that the magnetite layers are oxidized and Fe$^{3+}$ dominates at the surfaces due to maghemite ($\gamma$-Fe$_2$O$_3$) formation, which decreases with increasing magnetite layer thickness. From a layer thickness of around 20 nm on the cationic distribution is close to that of stoichiometric Fe$_3$O$_4$. At the interface between NiO and Fe$_3$O$_4$ we find the Ni to be in a divalent valence state, with unambiguous spectral features in the Ni 2p core level x-ray photoelectron spectra typical for NiO. The formation of a significant NiFe$_2$O$_4$ interlayer can be excluded by means of XMCD. Magneto optical Kerr effect measurements reveal significant higher coercive fields compared to magnetite thin films grown on MgO(001), and a 45$^{\circ}$ rotated magnetic easy axis. We discuss the spin magnetic moments of the magnetite layers and find that the moment increases with increasing thin film thickness. At low thickness the NiO/Fe$_3$O$_4$ films grown on Nb-SrTiO$_3$ exhibits a significantly decreased spin magnetic moments. A thickness of 20 nm or above leads to spin magnetic moments close to that of bulk magnetite.

The switching of the magnetization configurations of giant magnetoresistance multilayer stacks not only changes the electric and thermal conductivities, but also the thermopower. We study the magnetotransport and the magneto-thermoelectric properties of Co/Cu multilayer devices in a lateral thermal gradient. We derive values of the Seebeck coefficient, the thermoelectric figure of merit, and the thermoelectric power factor. The Seebeck coefficient reaches values up to -18 microvolt/K at room temperature and shows a magnetic field dependence up to 28.6 % upon spin reversal. In combination with thermal conductivity data of the same Co/Cu stack, we find a spin dependence of the thermoelectric figure of merit of up to 65 %. Furthermore, a spin dependence of the power factor of up to 110 % is derived., Comment: 15 pages, 3 figures

Transverse magneto-thermoelectric effects are studied in permalloy thin films grown on MgO and GaAs substrates and compared to those grown on suspended SiN membranes. The transverse voltage along platinum strips patterned on top of the permalloy films is measured vs. the external magnetic field as a function of angle and temperature gradient. After the identification of the contribution of the planar and anomalous Nernst effects, we find an upper limit for the transverse spin Seebeck effect, which is several orders of magnitude smaller than previously reported.

We report on room temperature low frequency noise due to magnetic inhomogeneities/domain walls (MI/DWs) in elliptic submicron FeCoB/MgO/FeCoB magnetic tunnel junctions with an area between 0.0245 and 0.0675{\mu}m2. In the smaller area junctions we found an unexpected random telegraph noise (RTN1), deeply in the parallel state, possibly due to stray field induced MI/DWs in the hard layer. The second noise source (RTN2) is observed in the antiparallel state for the largest junctions. Strong asymmetry of RTN2 and of related resistance steps with current indicate spin torque acting on the MI/DWs in the soft layer at current densities below 5x10^5 A/cm2., Comment: 12 pages, 4 figures

We investigate the spin-dependent Seebeck coefficient and the tunneling magneto thermopower of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJ) in the presence of thermal gradients across the MTJ. Thermal gradients are generated by an electric heater on top of the nanopillars. The thermo power voltage across the MTJ is found to scale linearly with the heating power and reveals similar field dependence as the tunnel magnetoresistance. The amplitude of the thermal gradient is derived from calibration measurements in combination with finite element simulations of the heat flux. Based on this, large spin-dependent Seebeck coefficients of the order of (240 \pm 110) \muV/K are derived. From additional measurements on MTJs after dielectric breakdown, a tunneling magneto thermopower up to 90% can be derived for 1.5 nm MgO based MTJ nanopillars.

The anomalous Hall effect (AHE) in the Heusler compounds Co$_{2}$FeSi and Co$_{2}$FeAl is studied in dependence of the annealing temperature to achieve a general comprehension of its origin. We have demonstrated that the crystal quality affected by annealing processes is a significant control parameter to tune the electrical resistivity $\rho_{xx}$ as well as the anomalous Hall resistivity $\rho_{ahe}$. Analyzing the scaling behavior of $\rho_{ahe}$ in terms of $\rho_{xx}$ points to a temperature-dependent skew scattering as the dominant mechanism in both Heusler compounds.

We study the tunneling magneto thermo power (TMTP) in CoFeB/MgO/CoFeB magnetic tunnel junction nanopillars. Thermal gradients across the junctions are generated by a micropatterned electric heater line. Thermo power voltages up to a few tens of \muV between the top and bottom contact of the nanopillars are measured which scale linearly with the applied heating power and hence with the applied temperature gradient. The thermo power signal varies by up to 10 \muV upon reversal of the relative magnetic configuration of the two CoFeB layers from parallel to antiparallel. This signal change corresponds to a large spin-dependent Seebeck coefficient of the order of 100 \muV/K and a large TMTP change of the tunnel junction of up to 90%., Comment: Revised version containing additional data and analyis. 13 pages, 3 figures

We systematically measured the DC voltage V_ISH induced by spin pumping together with the inverse spin Hall effect in ferromagnet/platinum bilayer films. In all our samples, comprising ferromagnetic 3d transition metals, Heusler compounds, ferrite spinel oxides, and magnetic semiconductors, V_ISH invariably has the same polarity. V_ISH furthermore scales with the magnetization precession cone angle with a universal prefactor, irrespective of the magnetic properties, the charge carrier transport mechanism or type. These findings quantitatively corroborate the present theoretical understanding of spin pumping in combination with the inverse spin Hall effect.

Here we demonstrate that both, tunnel magneto resistance (TMR) and resistive switching (RS), can be observed simultaneously in nano-scale magnetic tunnel junctions. The devices show bipolar RS of 6 % and TMR ratios of about 100 %. For each magnetic state, multiple resistive sates are created depending on the bias history which provides a method for multi-bit data storage and logic. The electronic transport measurements are discussed in the framework of a memristive system. Differently prepared MgO barriers are compared to gain insight into the switching mechanism.

Magnetic tunnel junctions for spin-transfer torque switching were prepared to investigate the dielectric breakdown. The breakdown occurs typically at voltages not much higher than the switching voltages, a bottleneck for the implementation of spin-transfer torque Magnetic Random Access Memory. Intact and broken tunnel junctions are characterized by transport measurements and then prepared for transmission electron microscopy and energy dispersive x-ray spectrometry by focussed ion beam. The comparison to our previous model of the electric breakdown for thicker MgO tunnel barriers reveals significant differences arising from the high current densities.

MgO based magnetic tunnel junctions are prepared to investigate the dielectric breakdown of the tunnel barrier. The breakdown is directly visualized by transmission electron microscopy measurements. The broken tunnel junctions are prepared for the microscopy measurements by focussed ion beam out of the junctions characterized by transport investigations. Consequently, a direct comparison of transport behavior and structure of the intact and broken junctions is obtained. Compared to earlier findings in Alumina based junctions, the MgO barrier shows much more microscopic pinholes after breakdown. This can be explained within a simple model assuming a relationship between the current density at the breakdown and the rate of pinhole formation.

We explore the fundamental time limit of ultra fast spin torque induced magnetization reversal of a magnetic memory cell. Spin torque precession during a spin torque current pulse and free precessional magnetization ringing after spin torque pulse excitation is detected by time resolved magneto transport. Adapting the duration of the spin torque excitation pulse to the spin torque precession period allows suppression of the magnetization ringing and thus coherent control of the final orientation of the magnetization. In the presence of a hard axis bias field such coherent control enables an optimum ultra fast, quasi ballistic spin torque magnetization reversal by a single precessional turn directly from the initial to the reversed equilibrium state., Comment: 13 pages 3 Figures

A combination of experimental techniques, e.g. vector-MOKE magnetometry, Kerr microscopy and polarized neutron reflectometry, was applied to study the field induced evolution of the magnetization distribution over a periodic pattern of alternating exchange bias stripes. The lateral structure is imprinted into a continuous ferromagnetic/antiferromagnetic exchange-bias bi-layer via laterally selective exposure to He-ion irradiation in an applied field. This creates an alternating frozen-in interfacial exchange bias field competing with the external field in the course of the re-magnetization. It was found that in a magnetic field applied at an angle with respect to the exchange bias axis parallel to the stripes the re-magnetization process proceeds via a variety of different stages. They include coherent rotation of magnetization towards the exchange bias axis, precipitation of small random (ripple) domains, formation of a stripe-like alternation of the magnetization, and development of a state in which the magnetization forms large hyper-domains comprising a number of stripes. Each of those magnetic states is quantitatively characterized via the comprehensive analysis of data on specular and off-specular polarized neutron reflectivity. The results are discussed within a phenomenological model containing a few parameters which can readily be controlled by designing systems with a desired configuration of magnetic moments of micro- and nano-elements., Comment: 11 pages, 7 figures

The knowledge of chemical and magnetic conditions at the Co40Fe40B20 / MgO interface is important to interpret the strong annealing temperature dependence of tunnel magnetoresistance of Co-Fe-B / MgO / Co-Fe-B magnetic tunnel junctions, which increases with annealing temperature from 20% after annealing at 200C up to a maximum value of 112% after annealing at 350C. While the well defined nearest neighbor ordering indicating crystallinity of the MgO barrier does not change by the annealing, a small amount of interfacial Fe-O at the lower Co-Fe-B / MgO interface is found in the as grown samples, which is completely reduced after annealing at 275C. This is accompanied by a simultaneous increase of the Fe magnetic moment and the tunnel magnetoresistance. However, the TMR of the MgO based junctions increases further for higher annealing temperature which can not be caused by Fe-O reduction. The occurrence of an x-ray absorption near-edge structure above the Fe and Co L-edges after annealing at 350C indicates the recrystallization of the Co-Fe-B electrode. This is prerequisite for coherent tunneling and has been suggested to be responsible for the further increase of the TMR above 275C. Simultaneously, the B concentration in the Co-Fe-B decreases with increasing annealing temperature, at least some of the B diffuses towards or into the MgO barrier and forms a B2O3 oxide.

We report on tunnelling magnetoresistance (TMR), current-voltage (IV) characteristics and low frequency noise in epitaxially grown Fe(110)/MgO(111)/Fe(110) magnetic tunnel junctions (MTJs) with dimensions from 2x2 to 20x20 um2. The evaluated MgO energy barrier (0.50+/-0.08 eV), the barrier width (13.1+/-0.5 angstrom) as well as the resistance times area product (7+/-1 Mohmsum2) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. The noise power, though exhibiting large variation, was observed to be roughly anticorrelated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behaviour could be related to an interplay between the magnetic state and the local barrier defects structure of the epitaxial MTJs, Comment: 9 pages and 3 figures

The temperature dependence of saturation and spin-flop fields for artificial ferrimagnets (AFi) based on antiparallel coupled CoFeB/Ru/CoFeB trilayers has been investigated in a temperature range between 80K and 600K. The results presented in this paper are relevant for magnetic devices using this system, e.g. magnetic-random access memory based on spin-flop switching. In good accordance to the theory, the saturation field Hsat behaves like Hsat ~ H_0 (T/T_0)/sinh(T/T_0) with a characteristic temperature of T_0 = 150K. Within this model, the Fermi velocity for the Ru layer is of the order of 10^5m/s, therefore, explaining the strong variation of the coupling strength with the temperature in Ru based AFi. Furthermore, a strong uniaxial anisotropy of K_u = 2x10^3 J/m^3 with a small angular distribution of the anisotropy axes is observed for the AFi trilayers based on amorphous CoFeB alloys., Comment: 4 pages, 4 figures, accepted for publication in Europhys. Lett

This work reports on the thermal stability of two amorphous CoFeB layers coupled antiferromagnetically via a thin Ru interlayer. The saturation field of the artificial ferrimagnet which is determined by the coupling, J, is almost independent on the annealing temperature up to more than 300 degree C. An annealing at more than 325 degree C significantly increases the coercivity, Hc, indicating the onset of crystallization., Comment: 4 pages, 3 figures

This work reports on the magnetic reversal of sub-micrometer sized elements consisting of an CoFeB/Ru/CoFeB artificial ferrimagnet (AFi). The elements were patterned into ellipses having a width of approximately 250 to 270nm and a varying aspect ratio between 1.3 and 8. The coercivity was found to decrease with an increasing imbalance of the magnetic moment of the two antiferromagnetically coupled layers and is therefore strongly affected by an increase of effective anisotropy due to the antiferromagnetic coupling of the two layers. With respect to a single layer of amorphous CoFeB, patterned in comparable elements, the AFi has an increased coercivity. Switching asteroids comparable to single layers were only observed for samples with a high net moment., Comment: 5 pages, 6 figures, accepted for publication in J. Appl. Phys

This work reports on the magnetic interlayer coupling between two amorphous CoFeB layers, separated by a thin Ru spacer. We observe an antiferromagnetic coupling which oscillates as a function of the Ru thickness x, with the second antiferromagnetic maximum found for x=1.0 to 1.1 nm. We have studied the switching of a CoFeB/Ru/CoFeB trilayer for a Ru thickness of 1.1 nm and found that the coercivity depends on the net magnetic moment, i.e. the thickness difference of the two CoFeB layers. The antiferromagnetic coupling is almost independent on the annealing temperatures up to 300 degree C while an annealing at 350 degree C reduces the coupling and increases the coercivity, indicating the onset of crystallization. Used as a soft electrode in a magnetic tunnel junction, a high tunneling magnetoresistance of about 50%, a well defined plateau and a rectangular switching behavior is achieved., Comment: 3 pages, 3 figures

The conductance and tunnel magneto-resistance (TMR) of the double barrier magnetic tunnel junction with spin-valve sandwich (F/P/F) inserted between two insulating barrier, are theoretically investigated. It is shown, that resonant tunnelling, due to the quantum well states of the electron confined between two barriers, sharply depends on the mutual orientation of the magnetizations of ferromagnetic layers F. The calculated optimistic value of TMR exceeds 2000% ., Comment: 3 pages, 4 figures