Search

Hypothesis Photoswitchable surfactants are used in the design of many light-responsive colloids and/or self-assemblies. Photo-isomerization enables to control molecular equilibrium, and triggers transient reorganizations with possibly out-of-equilibrium intermediate states that have been overlooked. Here, we address this question by an in depth structural investigation of intermediate lipid-surfactant assemblies that occur during fast isothermal photo-triggered transition in lipid:surfactant mixtures. Experiments The structural parameters of mixed assemblies of azobenzene-containing cationic surfactant (AzoTMA) and dioleoylphosphatidylcholine (DOPC) lipids were studied by light scattering and time-resolved small angle X-ray scattering. Structural and compositional information about the assemblies and unimers in bulk were determined at the photostationary states, as well as at intermediate kinetic states formed during UV or blue light illumination. Findings DOPC:AzoTMA systems form mixed assemblies representative of phospholipid:cationic surfactant mixtures, that evolve from spheroid, to rod-like micelles, and vesicles with increasing DOPC fraction. Transient assemblies detected during the photo-triggered kinetics are similar to the ones found in stationary states. But changes of AzoTMA unimers in bulk can be considerably faster than mass reorganizations of the mixed assemblies, suggesting that out-of-equilibrium conditions are transiently reached. Mass reorganization of the surfactant-enriched assemblies is much faster than in the lipid enriched ones, providing insight into the role of lipids in a slow reorganization of the assemblies.

Buckminsterfullerene (C

The rate of molecular exchange in diblock copolymer micelles is strongly dependent on the chain length of the core-forming insoluble block. Less is known about the influence of the soluble block forming the micellar corona. In this study we present a time-resolved small angle neutron scattering (TR-SANS) study exploring systematically the effect of corona chain length on the dynamics of chain exchange. As a model system we have taken amphiphilic AB diblock copolymers of the type C27H55-poly(ethylene oxide)x (C27–PEOx) with varying x between 4 and 36 kg/mol in aqueous solution in which well-defined spherical micelles with partially crystalline cores are formed. The TR-SANS results show that the chain exchange slows down considerably upon increasing PEO molecular weight, while the characteristic “attempt time” constant, τ0, was found to increase with a power law dependence τ0 ∼ MPEO9/5. The results are in excellent agreement with the Halperin and Alexander model1 and can be attributed to a reduced diffusion...

The modulation of conformational flexibility in antimicrobial peptides (AMPs) has been investigated as a strategy to improve their efficacy against bacterial pathogens while reducing their toxicity. Here, we synthesized a library of helicity-modulated antimicrobial peptoids by the position-specific incorporation of helix-inducing monomers. The peptoids displayed minimal variations in hydrophobicity, which permitted the specific assessment of the effect of conformational differences on antimicrobial activity and selectivity. Among the moderately helical peptoids, the most dramatic increase in selectivity was observed in peptoid 17, providing more than a 20-fold increase compared to fully helical peptoid 1. Peptoid 17 had potent broad-spectrum antimicrobial activity that included clinically isolated multi-drug-resistant pathogens. Compared to pexiganan AMP, 17 showed superior metabolic stability, which could potentially reduce the dosage needed, alleviating toxicity. Dye-uptake assays and high-resolution imaging revealed that the antimicrobial activity of 17 was, as with many AMPs, mainly due to membrane disruption. However, the high selectivity of 17 reflected its unique conformational characteristics, with differential interactions between bacterial and erythrocyte membranes. Our results suggest a way to distinguish different membrane compositions solely by helicity modulation, thereby improving the selectivity toward bacterial cells with the maintenance of potent and broad-spectrum activity.

Vapor–liquid equilibria data of three poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)/water liquid crystals (LCs) with CO2 has been obtained up to 6 bar. The investigated LCs consist of 60% (EO)3(PO)50(EO)3 (Pluronic L81), 70% (EO)8(PO)47(EO)8 (Pluronic L92), and 70% L92-NH2. The maximum CO2 loading of the LCs was 5–13 g CO2/kg sample. Pure L81 and L92 displayed higher absorption of CO2 than the LCs. Rheology measurements revealed that the increasing viscosity of the samples decreases the CO2 loading. Water diffusion in the LCs was qualitatively investigated by nuclear magnetic resonance, confirming that free water and tightly bound water are present in the LCs. 2020 The Author(s). Published with license by Taylor and Francis Group, LLC This is an Open Access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives License (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is properly cited, and is not altered, transformed, or built upon in any way.

RSC Advances 10(58), 35329 - 35340 (2020). doi:10.1039/D0RA07679A, Supramolecular assembly and PEGylation (attachment of a polyethylene glycol polymer chain) of peptides can be an effective strategy to develop antimicrobial peptides with increased stability, antimicrobial efficacy and hemocompatibility. However, how the self-assembly properties and PEGylation affect their lipid membrane interaction is still an unanswered question. In this work, we use state-of-the-art small angle X-ray and neutron scattering (SAXS/SANS) together with neutron reflectometry (NR) to study the membrane interaction of a series of multidomain peptides, with and without PEGylation, known to self-assemble into nanofibers. Our approach allows us to study both how the structure of the peptide and the membrane are affected by the peptide–lipid interactions. When comparing self-assembled peptides with monomeric peptides that are not able to undergo assembly due to shorter chain length, we found that the nanofibers interact more strongly with the membrane. They were found to insert into the core of the membrane as well as to absorb as intact fibres on the surface. Based on the presented results, PEGylation of the multidomain peptides leads to a slight net decrease in the membrane interaction, while the distribution of the peptide at the interface is similar to the non-PEGylated peptides. Based on the structural information, we showed that nanofibers were partially disrupted upon interaction with phospholipid membranes. This is in contrast with the considerable physical stability of the peptide in solution, which is desirable for an extended in vivo circulation time., Published by RSC Publishing, London

It is well-known that lipids constituting the cytoplasmic membrane undergo continuous reorganization to maintain the appropriate composition important for the integrity of the cell. The transport of lipids is controlled by mainly membrane proteins, but also spontaneous lipid transport between leaflets, lipid “flip–flop”, occurs. These processes do not only occur spontaneously under equilibrium, but also promote structural rearrangements, morphological transitions, and growth processes. It has previously been shown that intravesicular lipid “flip–flop” and intervesicular lipid exchange under equilibrium can be deduced indirectly from contrast variation time-resolved small-angle neutron scattering (TR-SANS) where the molecules are “tagged” using hydrogen/deuterium (H/D) substitution. In this work, we show that this technique can be extended to simultaneously detect changes in the growth and the lipid “flip–flop” and exchange rates induced by a peptide additive on lipid vesicles consisting of DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine), d-DMPC (1,2-dimyristoyl-d54-sn-glycero-3-phosphocholine), DMPG (1,2-dimyristoyl-sn-glycero-3-phospho-(1′-rac-glycerol)), and small amounts of DMPE-PEG (1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000]). Changes in the overall size were independently monitored using dynamic light scattering (DLS). We find that the antimicrobial peptide, indolicidin, accelerates lipid transport and additionally induces limited vesicular growth. Moreover, in TR-SANS experiments using partially labeled lipid mixtures to separately study the kinetics of the lipid components, we show that, whereas peptide addition affects both lipids similarly, DMPG exhibits faster kinetics. We find that vesicular growth is mainly associated with peptide-mediated lipid reorganization that only slightly affects the overall exchange kinetics. This is confirmed by a TR-SANS experiment of vesicles preincubated with peptide showing that after pre-equilibration the kinetics are only slightly slower.

The mechanism of action of antimicrobial peptides (AMPs) has been debated over many years, and various models have been proposed. In this work we combine small angle X-ray/neutron scattering (SAXS/SANS) techniques to systematically study the effect of AMPs on the cytoplasmic membrane of

The kinetic pathways for coacervation and micelle formation are still not fully understood. Driven by electrostatic interactions and entropically driven counterion release, complexation of oppositely charged macromolecules leads to the formation of micellar nanostructures. Here we study the coacervation process, from initial formation and growth of stable micelles, on a nanometric length scale using time-resolved small-angle X-ray scattering (TR-SAXS). The micellar coacervates are formed through the complexation of anionic polyelectrolyte poly(sodium 4-styrenesulfonate) (PSSS) and cationic block-copolymer poly(ethylene oxide)-block-poly((vinylbenzyl)trimethylammonium chloride) (PEO-b-PVBTA). Mixing the polyelectrolytes in a stoichiometric 1:1 charge ratio resulted in the formation of stable spherical core-shell micellar-like coacervates consisting of a central core of complexed PSSS and PVBTA with a PEO corona. By use of synchrotron SAXS coupled to a stopped-flow mixing apparatus, the whole formation kinetics of coacervates could be followed in situ from a few milliseconds. The results of a detailed data modeling reveal that the formation of these polyelectrolyte coacervates follows a two-step process: (i) first, metastable large-scale aggregates are formed upon a barrier-free complexation immediately after mixing; (ii) subsequently, the clusters undergo charge equilibration upon chain rearrangement and exchange processes yielding micellar-like aggregates with net neutral charge that are pinched off to yield the final stable micelle-like coacervates. While the initial cluster formation is very fast and completed within the dead time of mixing, the subsequent rearrangement becomes significantly slower with increasing molecular weight of the PVBTA block. Interestingly, the overall kinetic process was essentially concentration independent, indicating that the rearrangement process is mainly accomplished via noncooperative chain rearrangement and chain exchange processes.

Buckminsterfullerene (C-60) has a large potential for biomedical applications. However, the main challenge for the realization of its biomedical application potential is to overcome its extremely low water solubility. One approach is the coformulation with biocompatible water-soluble polymers, such as poly(2-oxazoline)s (PAOx), to form water-soluble C-60 nanoparticles (NPs). However, uniform and defined NPs have only been obtained via a thin film hydration method or using cyclodextrin-functionalized PAOx. Here, we report the mechanochemical preparation of defined and stable C-60:PAOx NPs by the introduction of a simple alkyne group as a polymer end-group. The presence of this alkyne bond is proven to be crucial in the mechanochemical synthesis of stable, defined sub-100 nm C-60:PAOx NPs, with high C-60 content up to 8.9 wt %.

We investigate micelles formed by mixtures of n-alkyl-poly(ethylene oxide) block copolymers, Cn-PEO, with different alkyl block lengths in aqueous solution. This model system has previously been used to shed light on the interplay between exchange kinetics and crystallinity in self-assembling systems [König et al., Phys. Rev. Lett., 2019, 122, 078001]. Now we report on the structure and thermodynamics of these micelles by combining results from small-angle X-ray scattering, differential scanning calorimetry and volumetric measurements. We show that mixed micelles are formed despite the fact that length-mismatched n-alkanes of similar weights in bulk tend to demix below the crystallization temperature. Instead, the system exhibits similar properties as single-component micelles but with a modulated melting region. Interestingly, the melting point depression due to self-confinement within the micellar core can be approximately described by a generalized Gibbs-Thomson equation, similar to single-component micelles [Zinn et al. Phys. Rev. Lett., 2014, 113, 238305]. Furthermore, we find a novel scaling law for these micelles where, at least for larger n, the aggregation number scales with the third power of the length of the hydrophobic block, Nagg ∝ n3. Possibly, there might be a cross-over from the conventional Nagg ∝ n2 behaviour around n ≈ 19. However, the reason for such a transition as well as the strong n dependence remains a challenge and requires more theoretical work.

Langmuir 37(20), 6178-6188 (2021). doi:10.1021/acs.langmuir.1c00304, Lipid nanodiscs formed by mixtures of styrene maleic acid (SMA) copolymers and lipid membranes are important tools for studying membrane proteins in many biotechnological applications. However, molecular interactions leading up to their formation are not well understood. Here, we elucidate the nanodisc formation pathways for SMA/lipid vesicle mixtures using small-angle X-ray scattering (SAXS) that allows detailed in situ nanostructural information. SMA copolymer that is initially aggregated in solution inserts its styrene units into the lipid bilayer hydrocarbon region, leading to fractures in the membrane. The initial copolymer���lipid interactions observed in the vesicles are also present in the formed discs, with excess copolymer distributed along the normal of the bilayer. The size and SMA distribution in the resulting discs strongly depend on the temperature, lipid/copolymer ratio, and lipid type. We find that the solubilization limit increases for membranes above the melting point, suggesting that defects in gel-like lipid membranes play a significant role in membrane fracturing and nanodisc formation. These findings provide unique insights into the formation of nanodiscs as well as into the microscopic mechanism of solubilization, which plays an important role in many applications and products ranging from household goods to biotechnology and medicine., Published by ACS Publ., Washington, DC

Self-assembly of amphiphilic polymers into micelles is an archetypical example of a "self-confined" system due to the formation of micellar cores with dimensions of a few nanometers. In this work, we investigate the chain packing and resulting shape of C-n-PEOx micelles with semicrystalline cores using small/wide-angle X-ray scattering (SAXS/WAXS), contrast-variation small-angle neutron scattering (SANS), and nuclear magnetic resonance spectroscopy (NMR). Interestingly, the n-alkyl chains adopt a rotator-like conformation and pack into prolate ellipses (axial ratio epsilon approximate to 0.5) in the "crystalline" region and abruptly arrange into a more spheroidal shape (e approximate to 0.7) above the melting point. We attribute the distorted spherical shape above the melting point to thermal fluctuations and intrinsic rigidity of the n-alkyl blocks. We also find evidence for a thin dehydrated PEO layer (

Antimicrobial peptides have attracted considerable interest as potential new class of antibiotics against multi-drug resistant bacteria. However, their therapeutic potential is limited, in part due to susceptibility towards enzymatic degradation and low bioavailability. Peptoids (oligomers of N-substituted glycines) demonstrate proteolytic stability and better bioavailability than corresponding peptides while in many cases retaining antibacterial activity. In this study, we synthesized a library of 36 peptoids containing fluorine, chlorine, bromine and iodine atoms, which vary by length and level of halogen substitution in position 4 of the phenyl rings. As we observed a clear correlation between halogenation of an inactive model peptoid and its increased antimicrobial activity, we designed chlorinated and brominated analogues of a known peptoid and its shorter counterpart. Short brominated analogues displayed up to 32-fold increase of the activity against S. aureus and 16- to 64-fold against E. coli and P. aeruginosa alongside reduced cytotoxicity. The biological effect of halogens seems to be linked to the relative hydrophobicity and self-assembly properties of the compounds. By small angle X-ray scattering (SAXS) we have demontrated how the self-assembled structures are dependent on the size of the halogen, degree of substitution and length of the peptoid, and correlated these features to their activity.

The shape and size of self‐assembled structures upon local organization of their molecular building blocks are hard to predict in the presence of long‐range interactions. Combining small‐angle X‐ray/neutron scattering data, theoretical modelling, and computer simulations, sodium dodecyl sulfate (SDS), over a broad range of concentrations and ionic strengths, was investigated. Computer simulations indicate that micellar shape changes are associated with different binding of the counterions. By employing a toy model based on point charges on a surface, and comparing it to experiments and simulations, it is demonstrated that the observed morphological changes are caused by symmetry breaking of the irreducible building blocks, with the formation of transient surfactant dimers mediated by the counterions that promote the stabilization of cylindrical instead of spherical micelles. The present model is of general applicability and can be extended to all systems controlled by the presence of mobile charges., Micellar shape changes of sodium dodecyl sulfate are associated with different binding modes of the counterions. Morphological changes are caused by symmetry breaking of the irreducible building blocks, with the formation of transient surfactant dimers mediated by the counterions that promote the stabilization of cylindrical instead of spherical micelles.

Mixtures of amphiphilic polymers and surfactants are used in a wide range of applications, e.g., pharmaceuticals, detergents, cosmetics, and drug delivery systems. Still, many questions remain on how the structure and, in particular, the kinetics of block copolymer micelles are affected in the presence of surfactants and what controls the solubilization kinetics. In this work, we have studied the stability and solubilization kinetics of block copolymer micelles upon the addition of the surfactant sodium dodecyl sulfate (SDS) using small-angle X-ray/neutron scattering. The ability of the surfactant to dissolve polymer micelles or form mixed micelles has been investigated using two types of amphiphilic polymers, poly-(ethylene-alt-propylene)-poly(ethylene oxide) (PEP1-PEO20) and n-alkyl-functionalized PEO (C-28-PEOS). The exchange kinetics of C-28-PEOS micelles are in the order of hours, while PEP1-PEO20 micelles are known to be frozen on a practical timescale. In this work, we show that the addition of SDS to PEP1-PEO20 provides virtually no solubilization, even after an extended period of time. However, upon adding SDS to C-28-PEOS micelles, we observe micellar dissolution and formation of mixed micelles occurring on the timescale of hours. Using a coexistence model of mixed and neat micelles, the SAXS data were analyzed to provide detailed structural parameters over time. First, we observe a fast fragmentation/fission step followed by a slow reorganization process. The latter process is essentially independent of concentration at low volume fraction but is greatly accelerated at larger concentrations. This might indicate a crossover from a predominance of molecular exchange to fusion/fission processes.

Telechelic polymers contain two chain ends that are able to promote self-assembly into "flowerlike" or interconnected micellar structures. Here, we investigate the molecular exchange kinetics of such micelles using time-resolved small-angle neutron scattering. We show that the activation energies of monofunctional and telechelic chain exchange are identical. This demonstrates that the two chain ends are not simultaneously released in a single event. Instead, the results show that, contrary to regular micelles, the kinetics occurs in a multistep process involving a collision-induced single-molecule exchange mechanism where the exchange rate is directly proportional to the polymer concentration. We show that this novel mechanism can be quantitatively explained by a simple kinetic model.

Silver linden flowers contain different pectins (PSI-PSIII) with immunomodulating properties. PSI is a low-esterified pectic polysaccharide with predominant homogalacturonan region, followed by rhamnogalacturonan I (RGI) with arabinogalactan II and RGII (traces) domains. PSII and PSIII are unusual glucuronidated RGI polymers. PSIII is a unique high molecular weight RGI, having almost completely O-3 glucuronidated GalA units with >30% O-3 acetylation at the Rha units. Linden pectins induced reactive oxygen species (ROS) and NO generation from non-stimulated whole blood phagocytes and macrophages, resp., but suppressed OZP-(opsonized zymosan particles)-activated ROS generation, LPS-induced iNOS expression and NO production. This dual mode of action suggests their anti-inflammatory activity, which is known for silver linden extracts. PSI expressed the highest complement fixation and macrophage-stimulating activities and was active on intestinal Peyer's patch cells. PSIII was active on non-stimulated neutrophils, as it induced s2-integrin expression, revealing that acetylated and highly glucuronidated RGI exhibits immunomodulating properties via phagocytes.

We study the self-assembly of mixtures of n-alkyl mono- and difunctionalized poly(ethylene oxide) (PEO) chains in the dilute concentration regime. The monofunctional PEOs were prepared by living anionic polymerization with varying n-alkyl length (n = 14, 16, 22, 28) and constant PEO molecular weight of 5 kg/mol. The difunctional materials were obtained through end-to-end coupling of two of the monofunctionalized PEOs via their terminal hydroxyl groups. The chosen synthetic pathway yields well-defined model compounds with narrow molecular weight distribution and complete end-group functionalization. By using both small-angle neutron scattering (SANS) and dynamic light scattering (DLS) combined with theoretical data modeling, we have systematically investigated both the global and inner structure of the self-assembled micellar structures. For short n-alkyl chain-ends, we find a formation of clustered micelles with a finite size whereas, intriguingly, at longer n-alkyls, we observe a crossover to flowerlike ...

A series of well-defined methoxy-poly(ethylene glycol)-block-polylactic acid (mPEG-b-PLA) diblock copolymers were successfully synthesized, characterized and used for the construction of anticancer nanoparticle delivery system. Nanoparticles (NPs) based on these polymers were prepared by employing the nanoprecipitation method, and they were non-covalently loaded with curcumin, curcumin-bortezomib model or curcumin-bortezomib complex (curc-BTZ). Both curcumin and bortezomib are rather hydrophobic and poorly water-soluble potent anticancer drugs with synergic effects forming together a pH-sensitive complex, stable at pH of blood plasma, yet hydrolytically labile at mildly acidic milieu typical for endosomes and interstitial space in solid tumors. PEG-Curcumin-loaded and curc-BTZ-loaded NPs with 100–150 nm size showed the maximum cellular uptake by HeLa, MCF-7 and MDA-MB 231 cells after 3 h. The NPs were located in the cytoplasm of the cells but not inside the nucleus. Bare NPs did not induce any cytotoxicity in the same cell lines in in vitro experiments, even at very high concentrations (up to 800 µg/mL). NPs containing curcumin were cytotoxic with an IC50 of 25 µg/mL, which corresponds to 2.5 µg/mL of loaded curcumin. These results show that the efficacy of curcumin is significantly enhanced when using the NPs as carriers. The efficiency was further augmented through the complexation of BTZ with curcumin. When using free curc-BTZ-complex, MCF-7 cells were more sensitive to the free complex 18.8 nM (IC50) than MDA-MB-231 cells 122.4 nM (IC50). Nanoparticle formulations with these drugs caused significant cytotoxicity with 7.5 nM (IC50) and 59.2 nM (IC50) after 24 h of the treatment.

The broad range of applications of synchrotron and neutron scattering in the investigation of soft condensed matter is reviewed. Appropriate combinations of these techniques allow probing the structure and dynamics of these complex systems from sub-nm to micron size scales and picoseconds to seconds and longer time ranges. Applications include a myriad of systems such as polymers, colloids, surfactants, phospholipids, biological macromolecules and functional materials both in bulk and at interfaces. Most studies are performed in situ under the real thermodynamic state of the given system and large ensemble averaged information is readily obtained. The new generations of synchrotron and neutron sources open possibilities for investigating more complex soft matter systems in hitherto unexplored dynamical states.

We have developed a biodegradable, biocompatible system for the delivery of the antituberculotic antibiotic rifampicin with a built-in drug release and nanoparticle degradation fluorescence sensor. Polymer nanoparticles based on poly(ethylene oxide) monomethyl ether- block -poly(e-caprolactone) were noncovalently loaded with rifampicin, a combination that, to best of our knowledge, was not previously described in the literature, which showed significant benefits. The nanoparticles contain a Forster resonance energy transfer (FRET) system that allows real-time assessment of drug release not only in vitro , but also in living macrophages where the mycobacteria typically reside as hard-to-kill intracellular parasites. The fluorophore also enables in situ monitoring of the enzymatic nanoparticle degradation in the macrophages. We show that the nanoparticles are efficiently taken up by macrophages, where they are very quickly associated with the lysosomal compartment. After drug release, the nanoparticles in the cmacrophages are enzymatically degraded, with half-life 88 ± 11 min.

The naturally occurring peptide indolicidin from bovine neutrophils exhibits strong biological activity against a broad spectrum of microorganisms. This is believed to arise from selective interactions with the negatively charged cytoplasmic lipid membrane found in bacteria. We have investigated the peptide interaction with supported lipid model membranes using a combination of complementary surface sensitive techniques: neutron reflectometry (NR), atomic force microscopy (AFM), and quartz crystal microbalance with dissipation monitoring (QCM-D). The data are compared with small-angle X-ray scattering (SAXS) results obtained with lipid vesicle/peptide solutions. The peptide membrane interaction is shown to be significantly concentration dependent. At low concentrations, the peptide inserts at the outer leaflet in the interface between the headgroup and tail core. Insertion of the peptide results in a slight decrease in the lipid packing order of the bilayer, although not sufficient to cause membrane thinning. By increasing the indolicidin concentration well above the physiologically relevant conditions, a deeper penetration of the peptide into the bilayer and subsequent lipid removal take place, resulting in a slight membrane thinning. The results suggest that indolicidin induces lipid removal and that mixed indolicidin-lipid patches form on top of the supported lipid bilayers. Based on the work presented using model membranes, indolicidin seems to act through the interfacial activity model rather than through the formation of stable pores.

The increasing emergence of multi-drug resistant bacteria is a serious threat to public health worldwide. Antimicrobial peptides have attracted attention as potential antibiotics since they are present in all multicellular organisms and act as a first line of defence against invading pathogens. We have previously identified a small all-d antimicrobial octapeptide amide kk(1-nal)fk(1-nal)k(nle)-NH2 (D2D) with promising antimicrobial activity. In this work, we have performed a structure-activity relationship study of D2D based on 36 analogues aimed at discovering which elements are important for antimicrobial activity and toxicity. These modifications include an alanine scan, probing variation of hydrophobicity at lys5 and lys7, manipulation of amphipathicity, N-and C-termini deletions and lys-arg substitutions. We found that the hydrophobic residues in position 3 (1-nal), 4 (phe), 6 (1-nal) and 8 (nle) are important for antimicrobial activity and to a lesser extent cationic lysine residues in position 1, 2, 5 and 7. Our best analogue 5, showed MICs of 4 &micro, g/mL against A. baumannii, E. coli, P. aeruginosa and S. aureus with a hemolytic activity of 47% against red blood cells. Furthermore, compound 5 kills bacteria in a concentration-dependent manner as shown by time-kill kinetics. Circular dichroism (CD) spectra of D2D and compounds 1&ndash, 8 showed that they likely fold into &alpha, helical secondary structure. Small angle x-ray scattering (SAXS) experiments showed that a random unstructured polymer-like chains model could explain D2D and compounds 1, 3, 4, 6 and 8. Solution structure of compound 5 can be described with a nanotube structure model, compound 7 can be described with a filament-like structure model, while compound 2 can be described with both models. Lipid interaction probed by small angle X-ray scattering (SAXS) showed that a higher amount of compound 5 (~50&ndash, 60%) inserts into the bilayer compared to D2D (~30&ndash, 50%). D2D still remains the lead compound, however compound 5 is an interesting antimicrobial peptide for further investigations due to its nanotube structure and minor improvement to antimicrobial activity compared to D2D.

Molecular exchange processes are important equilibration and transport mechanisms in both synthetic and biological self-assembled systems such as micelles, vesicles, and membranes. Still, these processes are not entirely understood, in particular the effect of crystallinity and the interplay between cooperative melting processes and chain exchange. Here we focus on a set of simple polymer micelles formed by binary mixtures of poly(ethylene oxide)-mono-$n$-alkyl-ethers (${\mathrm{C}}_{n}\text{\ensuremath{-}}\mathrm{PEO}5$) which allows the melting point to be tuned over a wide range. We show that the melting transition is cooperative in the confined 4--5 nm micellar core, whereas the exchange process is widely decoupled and unimeric in nature. As confirmed by differential scanning calorimetry, the total activation energy for ejecting a molecule out of the micellar core below the melting point is the sum of the enthalpy of fusion and the corresponding activation energy in the melt state. This suggests that a ``local, single-chain melting process'' preludes the molecular diffusion out of the micelle during chain exchange.

Telechelic polymers, that is, hydrophilic polymers with hydrophobic end-groups, spontaneously form hydrogels consisting of interconnected micelles. Here we investigate the relation between the microscopic dynamics determining the connectivity, that is, the lifetime of the physical bonds and the resulting rheological properties. This is achieved by quantitatively relating the chain exchange kinetics measured by time-resolved small-angle neutron scattering (TR-SANS) and the mechanical response obtained from linear oscillatory shear measurements. The results show that the characteristic relaxation time obtained from rheology coincides exactly with TR-SANS at intermediate concentrations. The activation energy, Ea, is concentration-independent and remain exactly the same as for TR-SANS. Upon crossing the melting point, a discrete change in activation energy is observed showing the contribution from the enthalpy of fusion to the release/debridging process. The results clearly show that the mechanical response a...

Transformations between different micellar morphologies in solution induced by changes in composition, salt, or temperature are well-known phenomena; however, the understanding of the associated kinetic pathways is still limited. Especially for mixed surfactant systems, the micelles can take a very wide range of structures, depending on the surfactant packing parameter and other thermodynamic conditions. Synchrotron-based small-angle X-ray scattering (SAXS) in combination with fast mixing using a stopped-flow apparatus can give direct access to the structural kinetics on a millisecond time scale. Here, this approach is used to study the formation of cylindrical micelles after mixing two solutions with globular micelles of the nonionic surfactant dodecyl maltoside (DDM) and the anionic surfactant sodium dodecyl sulfate (SDS), respectively. Two separate processes were identified: (i) a transition in micellar shell structure, interpreted as exchange of surfactant molecules resulting in mixed globular micelles, and subsequently, (ii) fusion into larger, cylindrical structures.

Amphiphilic peptide-polymer conjugates have the ability to form stable nanoscale micelles, which show great promise for drug delivery and other applications. A recent design has utilized the end-conjugation of alkyl chains to 3-helix coiled coils to achieve amphiphilicity, combined with the side-chain conjugation of polyethylene glycol (PEG) to tune micelle size through entropic confinement forces. Here we investigate this phenomenon in depth, using coarse-grained dissipative particle dynamics (DPD) simulations in an explicit solvent and micelle theory. We analyze the conformations of PEG chains conjugated to three different positions on 3-helix bundle peptides to ascertain the degree of confinement upon assembly, as well as the ordering of the subunits making up the micelle. We discover that the micelle size and stability is dictated by a competition between the entropy of PEG chain conformations in the assembled state, as well as intermolecular cross-interactions among PEG chains that promote cohesion between neighboring conjugates. Our analyses build on the role of PEG molecular weight and conjugation site and lead to computational phase diagrams that can be used to design 3-helix micelles. This work opens pathways for the design of multifunctional micelles with tunable size, shape and stability.

Synthesis of novel host-guest functionalized polymers is presented along with structural characterization using small-angle X-ray scattering (SAXS) of the resulting nanoparticles. Mono-6-deoxy-mono-6-azidoβCD (N 3 βCD) was grafted onto alkyne-functionalized pullulan via the “click” reaction copper(I)-catalyzed azide alkyne cycloaddition (CuAAC) and an adamantane-modified dextran was prepared via the same strategy. Characterization of the polymers was carried out using nuclear magnetic resonance (NMR) spectroscopy, gel filtration chromatography (GFC), isothermal titration calorimetry (ITC) and SAXS. Nanoparticles were created via host-guest interactions between the well-defined βCD-pullulans and adamantane-modified dextran. Characterization was carried out using dynamic light scattering (DLS) and SAXS, which revealed spherical particles in the sub-100 nm range. The studies shed light on the importance of molecular structure and host-guest ratio on crucial properties such as particle size, size distribution, porosity and stability towards aggregation.

Using small angle X-ray and neutron scattering (SAXS/SANS) and detailed theoretical modelling we have elucidated the structure of the antimicrobial peptide, indolicidin, and the interaction with model lipid membranes of different anionic lipid compositions mimicking typical charge densities found in the cytoplasmic membrane of bacteria. First, we show that indolicidin displays a predominantly disordered, random chain conformation in solution with a small fraction (≈1%) of fiber-like nanostructures that are not dissolved at higher temperatures. The peptide is shown to strongly interact with the membranes at all charge densities without significantly perturbing the lipid bilayer structure. Instead, the results show that indolicidin inserts into the outer leaflet of the lipid vesicles causing a reduced local order of the lipid packing. This result is supported by an observed change in the melting point of the lipids upon addition of the peptide, as seen by differential scanning calorimetry experiments. The peptide does not to our observation affect the thickness of the membrane or form distinct structural pores in the membrane at physiologically relevant concentrations as has been previously suggested as an important mode of action. Finally, using sophisticated contrast variation SANS, we show that the peptide does not affect the random lateral distribution of anionic lipids in the membrane. Together, these results demonstrate that the structural aspects of the mode of action of antimicrobial peptides can be elucidated in detail using SAS techniques with liposomes as model systems.

Natural proteins self-assemble into highly-ordered nanoscaled architectures to perform specific functions. The intricate functions of proteins have provided great impetus for researchers to develop strategies for designing and engineering synthetic nanostructures as protein mimics. Compared to the success in engineering fibrous protein mimetics, the design of discrete globular protein-like nanostructures has been challenging mainly due to the lack of precise control over geometric packing and intermolecular interactions among synthetic building blocks. In this contribution, we report an effective strategy to construct shape-specific nanostructures based on the self-assembly of chimeric peptides consisting of a coiled coil dimer and a collagen triple helix folding motif. Under salt-free conditions, we showed spontaneous self-assembly of the chimeric peptides into monodisperse, trigonal bipyramidal-like nanoparticles with precise control over the stoichiometry of two folding motifs and the geometrical arrangements relative to one another. Three coiled coil dimers are interdigitated on the equatorial plane while the two collagen triple helices are located in the axial position, perpendicular to the coiled coil plane. A detailed molecular model was proposed and further validated by small angle X-ray scattering experiments and molecular dynamics (MD) simulation. The results from this study indicated that the molecular folding of each motif within the chimeric peptides and their geometric packing played important roles in the formation of discrete protein-like nanoparticles. The peptide design and self-assembly mechanism may open up new routes for the construction of highly organized, discrete self-assembling protein-like nanostructures with greater levels of control over assembly accuracy.

Hybrid poly(ethylene glycol)-co-peptide hydrogels are a versatile platform for bone regeneration. For the use as injectable scaffolds, a good understanding of reaction kinetics and physical properties is vital. However, these factors have not yet been comprehensively illuminated. We show that gelation time can be effectively controlled by pH without affecting the elasticity of the formed hydrogels. Maleimide functionalised PEG gels at lower pH and produces more densely cross-linked networks than vinylsulfone functionalised PEG. Both form non-ideal networks. The elastic moduli on the order of a few kPa are in good agreement with the structural characterisation. Primary human osteoblasts cultured in proximity to bulk gels were not adversely affected in vitro. The results demonstrate that hybrid PEG-peptide hydrogels can be tailored to the requirements of in situ gelation. Attributed to their increased structural properties and a higher tolerance towards low pH, maleimide functionalised hydrogels might provide a better alternative for injectable applications.

The micellization behavior of a temperature and pH responsive pentablock terpolymer, poly(2-(N,N-diethylamino)ethylmethacrylate)-block-poly(N-isopropylacrylamide)-block-poly(ethylene glycol)-block-poly(N-isopropylacrylamide)-block-poly(2-(N,N-diethylamino)ethylmethacrylate, abbreviated as PDEAEMAx-b-PNIPAAMy-b-PEGz-b-PNIPAAMy-b-PDEAEMAx, was studied. Two variants of the polymer, with difference in block lengths, were examined using light scattering and small angle neutron scattering (SANS) as the main tools, with the aim of following nanostructural changes in the system with varying temperature and pH. With a sufficiently long PDEAEMA block, micelles of overall sizes around 50 nm and with a PDEAEMA-rich corona are formed at room temperature and at low pH. A change to a system with a PDEAEMA-rich core can be obtained via a jump in pH from 3 to 9. An increase in temperature will, at low pH, lead to formation of micelles also for the polymer with a short PDEAEMA block, with a transition around 42 °C. If the temperature increase is instead performed at pH 9, the transition to compact PDEAEMA-core micelles occurs at a slightly lower temperature (39 °C). This difference is attributed to the increased hydrophobic character for a system with deprotonated PDEAEMA-blocks.

We present a systematic investigation of a novel series of star polymers consisting of arms made up from poly(N-isopropylacrylamide)-b-poly(2-acrylamido-2-methylpropanesulfonate) (PNIPAAM-block-PAMPS) block copolymers. The polymers were synthesized as a 3-arm and 2-arm (i.e., a tetrablock copolymer) using a “core-first” method and a sequential atomic transfer radical polymerization (ATRP) protocol. Using asymmetric flow field-flow fractionation (AFFFF), Zetasizer, and small-angle X-ray scattering (SAXS), the phase behavior and nanostructure of the system in dilute solutions are studied in detail. While AFFFF equipped with a light scattering and refractive index detectors provides distribution of molecular weight and overall sizes in solution, we use SAXS combined with theoretical modeling to elucidate the inter- and intramolecular interactions of the star polymers. In particular, by employing a detailed model for a star-diblock copolymer assuming Gaussian chain statistics, we extract the chain conformatio...

Nanoparticles, 10-30 nm in size, have shown great prospects as nanocarriers for drug delivery. We designed amphiphiles based on 3-helix peptide-PEG conjugate forming 15 nm micelles (defined as "3-helix micelles") with good in vivo stability. Here, we investigated the effect of the site of PEG conjugation on the kinetic stability and showed that the conjugation site affects the PEG chain conformation and the overall molecular architecture of the subunit. Compared to the original design where the PEG chain is located in the middle of the 3-helix bundle, micelle kinetic stability was reduced when the PEG chain was attached near the N-terminus (t(1/2) = 35 h) but was enhanced when the PEG chain was attached near the C-terminus (t(1/2) = 80 h). Quantitative structural and kinetic analysis suggest that the kinetic stability was largely dictated by the combined effects of entropic repulsion associated with PEG chain conformation and the geometric packing of the trimeric subunits. The modular design approach coupled with a variety of well-defined protein stucture and functional polymers will significantly expand the utility of these materials as nanocarriers to meet current demands in nanomedine.

The association properties of aqueous solutions of the anionic thermo-responsive triblock terpolymer n-octadecyl-poly(ethylene glycol)-block-poly(N-isopropyl acrylamide)-block-poly(2-acrylamido-2-methyl-1-propanesulfonic sodium), abbreviated as C18-PEG10-b-PNIPAAM54-b-PAMPS10, have been studied as a function of temperature and salinity. This polymer exhibits a lower critical solution temperature (LCST) owing to its PNIPAAM block, and the presence of charges at the end of the chain influences the interaction properties. The effect of ionic strength was examined in detail by means of turbidimetry, zeta-sizer, dynamic light scattering, densitometry, and small angle neutron scattering (SANS). A temperature increase was seen to promote the formation of large aggregates in this system, with a strong dependency on the ionic strength of the solution. Increasing the ionic strength was found to give a large and controllable decrease in the cloud point (CP) due to screening of the electrostatic interactions. The hydrodynamic radius was found to drop significantly upon the addition of salt. At temperatures above CP, the intermicellar clusters observed by dynamic light scattering were found to contract. Furthermore, zeta-potential measurements demonstrated that charges were forced out towards the surface of the micellar structures with increasing temperature due to the strong dehydration effect of the associating PNIPAAM blocks.

Despite over a century of modern surfactant science, the kinetic pathways of morphological transitions in micellar systems are still not well understood. This is mainly as a result of the lack of sufficiently fast methods that can capture the structural changes of such transitions. Herein, a simple surfac- tant system consisting of sodium dodecyl sulfate (SDS) in aqueous NaCl solutions is investigated. Combining synchro- tron radiation small-angle X-ray scattering (SAXS) with fast stopped-flow mixing schemes allows monitoring the process where polymer-like micelles are formed from globular micelles when the salt concentration is suddenly increased. The results show that "worm-like" micelles are formed by fusion of globular micelles and short cylinders in a fashion that bears similarities to a step-like polymerization process.

We report here a facile approach to prepare filamentous supramolecular peptide–drug conjugates with precise drug/carrier stoichiometry, nearly 100% loading efficiency and exceptional anti-cancer drug efficacy for chemotherapy.

Here we present an extensive small-angle neutron scattering (SANS) structural characterization of micelles formed by poly(ethylene oxide)-mono-n-alkyl ethers (Cn–PEOx) in dilute aqueous solution. Chemically, Cn–PEOx can be considered as a hybrid between a low-molecular weight surfactant and an amphiphilic block copolymer. The present system, prepared through anionic polymerization techniques, is better defined than other commercially available polymers and allows a very precise and systematic testing of the theoretical predictions from thermodynamical models. The equilibrium micellar properties were elaborated by systematically varying the n-alkyl chain length (n) at constant PEO molecular weight or increasing the soluble block size (x), respectively. The structure was reminiscent of typical spherical star-like micelles i.e. a constant core density profile, [similar]r0, and a diffuse corona density profile, [similar]r−4/3. Through a careful quantitative analysis of the scattering data, it is found that the aggregation number, Nagg initially rapidly decreases with increasing PEO length until it becomes independent at higher PEO molecular weight as expected for star-like micelles. On the other hand, the dependency on the n-alkyl length is significantly stronger than that expected from the theories for star-like block copolymer micelles, Nagg [similar] n2 similar to what is expected for surfactant micelles. Hence the observed aggregation behavior suggests that the Cn–PEOx micelles exhibit a behavior that can be considered as a hybrid between low-molecular weight surfactant micelles and diblock copolymer micelles.

Here we present an in situ study of the nonequilibrium cylinder-to-sphere morphological transition kinetics on the millisecond range in a model block copolymer micelle system revealing the underlying mechanism and pathways of the process. By employing the stopped-flow mixing technique, the system was rapidly brought (≈100 μs) deep into the instability region, and the kinetics was followed on the time scale of milliseconds using both time-resolved small-angle neutron and X-ray scattering (TR-SANS and TR-SAXS, respectively). Due to the difference in contrast and resolution, SAXS and SANS provide unique complementary information. Our analysis shows that the morphological transition is characterized by a single rate constant indicating a two-state model where the transition proceeds through direct decomposition (fragmentation) of the cylinders without any transient intermediate structures. The cylindrical segments formed in the disintegration process subsequently grow into spherical micelles possibly through the molecular exchange mechanism until near equilibrium micelles are formed. The observation of a two-step kinetic mechanism, fluctuation-induced fragmentation and ″ripening″ processes, provides unique insight into the nonequilibrium behavior of block copolymer micelles in dilute solutions.