Search

This paper explores the idea of using redirective reconfigurable intelligent surfaces (RedRIS) to overcome many of the challenges associated with the conventional reflective RIS. We develop a framework for jointly optimizing the switching matrix of the lens-type RedRIS ports along with the active precoding matrix at the base station (BS) and the receive scaling factor. A joint non-convex optimization problem is formulated under the minimum mean-square error (MMSE) criterion with the aim to maximize the spectral efficiency of each user. In the single-cell scenario, the optimum active precoding matrix at the multi-antenna BS and the receive scaling factor are found in closed-form by applying Lagrange optimization, while the optimal switching matrix of the lens-type RedRIS is obtained by means of a newly developed alternating optimization algorithm. We then extend the framework to the multi-cell scenario with single-antenna base stations that are aided by the same lens-type RedRIS. We further present two methods for reducing the number of effective connections of the RedRIS ports that result in appreciable overhead savings while enhancing the robustness of the system. The proposed RedRIS-based schemes are gauged against conventional reflective RIS-aided systems under both perfect and imperfect channel state information (CSI). The simulation results show the superiority of the proposed schemes in terms of overall throughput while incurring much less control overhead.

This paper introduces a novel approach of utilizing the reconfigurable intelligent surface (RIS) for joint data modulation and signal beamforming in a multi-user downlink cellular network by leveraging the idea of backscatter communication. We present a general framework in which the RIS, referred to as modulating intelligent surface (MIS) in this paper, is used to: i) beamform the signals for a set of users whose data modulation is already performed by the base station (BS), and at the same time, ii) embed the data of a different set of users by passively modulating the deliberately sent carrier signals from the BS to the RIS. To maximize each user's spectral efficiency, a joint non-convex optimization problem is formulated under the sum minimum mean-square error (MMSE) criterion. Alternating optimization is used to divide the original joint problem into two tasks of: i) separately optimizing the MIS phase-shifts for passive beamforming along with data embedding for the BS- and MIS-served users, respectively, and ii) jointly optimizing the active precoder and the receive scaling factor for the BS- and MIS-served users, respectively. While the solution to the latter joint problem is found in closed-form using traditional optimization techniques, the optimal phase-shifts at the MIS are obtained by deriving the appropriate optimization-oriented vector approximate message passing (OOVAMP) algorithm. Moreover, the original joint problem is solved under both ideal and practical constraints on the MIS phase shifts, namely, the unimodular constraint and assuming each MIS element to be terminated by a variable reactive load. The proposed MIS-assisted scheme is compared against state-of-the-art RIS-assisted wireless communication schemes and simulation results reveal that it brings substantial improvements in terms of system throughput while supporting a much higher number of users.

This paper tackles the problem of joint active and passive beamforming optimization for an intelligent reflective surface (IRS)-assisted multi-user downlink multiple-input multiple-output (MIMO) communication system. We aim to maximize spectral efficiency of the users by minimizing the mean square error (MSE) of the received symbol. For this, a joint optimization problem is formulated under the minimum mean square error (MMSE) criterion. First, block coordinate descent (BCD) is used to decouple the joint optimization into two sub-optimization problems to separately find the optimal active precoder at the base station (BS) and the optimal matrix of phase shifters for the IRS. While the MMSE active precoder is obtained in a closed form, the optimal phase shifters are found iteratively using a modified version (also introduced in this paper) of the vector approximate message passing (VAMP) algorithm. We solve the joint optimization problem for two different models for IRS phase shifts. First, we determine the optimal phase matrix under a unimodular constraint on the reflection coefficients, and then under the constraint when the IRS reflection coefficients are modeled by a reactive load, thereby validating the robustness of the proposed solution. Numerical results are presented to illustrate the performance of the proposed method using multiple channel configurations. The results validate the superiority of the proposed solution as it achieves higher throughput compared to state-of-the-art techniques.

As the ravages caused by COVID-19 pandemic are becoming inevitable with every moment, monitoring and understanding of transmission and fatality rate has become even more paramount for containing its spread. The key purpose of this analysis is to report the real-time effective reproduction rate ($R_t$ ) and case fatality rates (CFR) of COVID-19 in South Asia region. Data for this study are extracted from JHU CSSE COVID-19 Data source up to July 31, 2020. $R_t$ is estimated using exponential growth and time-dependent methods. R0 package in R-language is employed to estimate $R_t$ by fitting the existing epidemic curve. Case fatality rate is estimated by using Naive and Kaplan-Meier methods. Owing to exponential increase in cases of COVID-19, the pandemic will ensue in India, Maldives and in Nepal as $R_t$ was estimated greater than 1 for these countries. Although case fatality rates are found lesser as compared to other highly affected regions in the world, strict monitoring of deaths for better health facilities and care of patients is emphasized. More regional level cooperation and efforts are the need of time to minimize the detrimental effects of the virus.