Search

This paper reports on the efficiency of fabric-reinforced cementitious matrix (FRCM) in enhancing the flexural capacity and deformational characteristics of RC beams. In the main experimental part of the paper, 12 RC beams, 2,500 mm long, 150 mm wide, and 260 mm deep, were fabricated. The beams had two different steel reinforcement ratios, namely, sρD12=0.72% and sρD16=1.27%, representing typical underreinforced beam sections. The strengthened beams utilized two FRCM types, carbon and polyparaphenylene benzobisoxazole (PBO) FRCM systems. In the second part of the work, tensile material characterization tests were performed on the FRCM coupons to determine the tensile characteristics of the FRCM composites. The beams were tested in flexure under four-point loading until failure. Two beams without FRCM strengthening were used as a benchmark. Six beams were externally strengthened using one, two, and three layers of carbon FRCM system. Four beams were strengthened with one and two layers of PBO FRCM system. Test results showed that the flexural capacity of the strengthened beams increased by 77% for the carbon FRCM system (three layers) and to 27% for the PBO FRCM system (two layers) over that of their benchmark (unstrengthened) beams. [ABSTRACT FROM AUTHOR]

This paper presents the test results of a study on the bond behavior of basalt fiber-reinforced polymer (BFRP) bars to concrete. Thirty six concrete cylinders reinforced with BFRP bars and twelve cylinders reinforced with glass fiber-reinforced polymer (GFRP) bars were tested in direct pullout conditions. Test parameters included the FRP material (basalt and glass), the bar diameter, and the bar embedment length in concrete. Bond-slip curves of BFRP and GFRP bars revealed similar trends. BFRP bars developed average bond strength 75% of that of GFRP bars. All BFRP specimens failed in a pullout mode of failure along the interfacial surface between the outer layer of the bar and the subsequent core layers. The influence of various parameters on the overall bond performance of BFRP bars is analyzed and discussed. The well-known BPE and modified-BPE analytical models were calibrated to describe the bond-slip relationships of the bars. Test results demonstrate the promise of using the BFRP bars as an alternative to the GFRP bars in reinforcing concrete elements. [ABSTRACT FROM AUTHOR]