Search

This comprehensive review explores recent catalyst advancements for the hydrodeoxygenation (HDO) of aromatic oxygenates derived from lignin, with a specific focus on the selective production of valuable aromatics under moderate reaction conditions. It addresses critical challenges in bio-crude oil upgrading, encompassing issues related to catalyst deactivation from coking, methods to mitigate deactivation, and techniques for catalyst regeneration. The study investigates various oxygenates found in bio-crude oil, such as phenol, guaiacol, anisole, and catechol, elucidating their conversion pathways during HDO. The review emphasizes the paramount importance of selectively generating arenes by directly cleaving C–O bonds while avoiding unwanted ring hydrogenation pathways. A comparative analysis of different bio-crude oil upgrading processes underscores the need to enhance biofuel quality for practical applications. Additionally, the review focuses on catalyst design for HDO. It compares six major catalyst categories, including metal sulfides, transition metals, metal phosphides, nitrides, carbides, and oxides, to provide insights for efficient bio-crude oil upgrading toward sustainable and eco-friendly energy alternatives.

Biodiesel is a promising sustainable alternative to non-renewable petrodiesel. In this work, oils extracted from microalgae are used for biodiesel production. To simplify the process, the extraction of the oils and their reaction are made to take place simultaneously in one step. Immobilized lipase was used as the catalyst, and supercritical CO2 (SC-CO2) was used as an extraction solvent and reaction medium. The use of SC-CO2 allows easy separation of the products and leaves the leftover biomass uncontaminated, allowing it to be utilized in food and pharmaceutical applications. The effects of temperature (35–50 °C), reaction time (2-6 h), and methanol:oil (M:O) molar ratio (8:1–16:1) on biodiesel yield were investigated. Within 6 h, the maximum biodiesel production yield was found to be 19.3% at a temperature of 35 °C and at an M:O molar ratio of 8:1. The results hold promise in simplifying the microalgae-to-biodiesel production process. Keywords: Biodiesel, Microalgae, Supercritical CO2, Extraction, Transesterification

Wastewater treatment plants (WWTPs) are one of the most energy-intensive industries. Every stage of wastewater treatment consumes energy, which is the primary contributor to WWTP costs. Adsorbents and process optimization are critical for energy savings. The removal of dyes from industrial wastewater by adsorption using commercially available adsorbents is inefficient. Metal–organic frameworks (MOFs) have outstanding properties that can improve separation performance over current commercial adsorbents, and thus, these materials represent a milestone in improving dye removal in water treatment methods. In this work, three types of metal–organic frameworks (Fe-BTC, Cu-BTC, and ZIF-8) have been investigated as prospective adsorbents for methyl orange removal from water in batch setups. The results showed that at 15 mg/L MO initial concentration and 100 mg dosage, Fe-BTC had the highest removal efficiency of 91%, followed by ZIF-8 (63%), and finally Cu-BTC (35%), which exhibited structural damage due to its instability in water. Fe-BTC maintained consistent adsorption capacity over a wide range of pH values. Furthermore, a 23 full factorial design analysis was implemented to evaluate the conditions for maximum MO-removal efficiency. The main effects, interaction effects, analysis of variance (ANOVA), and the Pareto chart were reported. The statistical analysis demonstrated that the MOF type was the most significant factor, followed by dosage and initial concentration. The analysis indicated that the type of MOF and dosage had a positive effect on the removal efficiency, while the initial concentration had a negative effect. The two-way and three-way interactions were also found to be significant.

Biodiesel is a promising candidate for sustainable and renewable energy and extensive research is being conducted worldwide to optimize its production process. The employed catalyst is an important parameter in biodiesel production. Metal–organic frameworks (MOFs), which are a set of highly porous materials comprising coordinated bonds between metals and organic ligands, have recently been proposed as catalysts. MOFs exhibit high tunability, possess high crystallinity and surface area, and their order can vary from the atomic to the microscale level. However, their catalytic sites are confined inside their porous structure, limiting their accessibility for biodiesel production. Modification of MOF structure by immobilizing enzymes or ionic liquids (ILs) could be a solution to this challenge and can lead to better performance and provide catalytic systems with higher activities. This review compiles the recent advances in catalytic transesterification for biodiesel production using enzymes or ILs. The available literature clearly indicates that MOFs are the most suitable immobilization supports, leading to higher biodiesel production without affecting the catalytic activity while increasing the catalyst stability and reusability in several cycles.