Search

A one-pot synthesis of anilines and nitrosobenzenes from phenols has been developed using an ipso-oxidative aromatic substitution ((i)SOAr) process. The products are obtained in good yields under mild and metal-free conditions. The leaving group effect on reactions that proceed through mixed quionone monoketals has also been investigated and a predictive model has been established.

Triazine-based unimolecular initiators are shown to mediate the controlled radical polymerization of several monomer classes, yielding polymers with low dispersities, targeted molecular weights, and active chain ends. We report the modular synthesis of structurally and electronically diverse triazine-based unimolecular initiators and demonstrate their ability to efficiently control the radical polymerization of modified styrene monomers. Copolymerizations of styrene with butyl acrylate or methyl methacrylate were conducted to highlight the monomer family tolerance of this system. Notably, in the case of methyl methacrylate and styrene, up to 90 mol% methyl methacrylate comonomer loadings could be achieved while maintaining a controlled polymerization, allowing the synthesis of a range of block copolymers. This class of triazine-based mediators has the potential to complement current methods of controlled radical polymerization and marks an important milestone in ongoing efforts to develop initiators and mediators with high monomer tolerance that are both metal and sulfur-free.

Heterocyclic compounds have played a significant role in the field of photochromism with applications ranging from energy production, chemical sensing, and molecular actuators to biological systems. While heterocyclic photochromic materials can be of both P-type and T-type, herein we focus on the background, synthesis, properties, and applications of specifically T-type photochromic compounds derived from heterocycles. It is the goal of this chapter to bring greater attention to these emergent architectures in the hopes of further advancing their role in the field.

Continuing developments in the elucidation techniques of complex catalytic processes is of foremost importance to modern synthetic chemistry, and the identification of efficient synthetic techniques relies on precise, reliable, and adaptable methods to dissect the mechanism of a given transformation. Currently, methods of reaction development are grounded upon the systematic modification of specific variables - such as temperature, time, concentration, etc. - to account for and control the dynamic series of coupled equilibria within a catalytic environment. On the other hand, tandem reaction analytical methods that involve the concomitant use of different instruments to probe a reaction can provide time-resolved information regarding active chemical species and facilitate the interrogation and optimization of the system. Herein, we report our study applying tandem in situ ReactIR and HPLC-MS monitoring to the dysprosium(III) triflate-catalyzed aza-Piancatelli rearrangement of 2-furylcarbinols, a reaction that grants access to trans-4,5-disubstituted cyclopentenones - common motifs in important biologically relevant and natural compounds. With a prototype automated sampling apparatus, information was obtained about the intrinsic chemoselectivity of the reaction, and previously unseen intermediates were observed, allowing for a more detailed reaction mechanism to be substantiated. The advantages of applying this type of tandem measurement to study these types of systems are also discussed. (Figure Presented).

Photoredox catalysis is employed to generate highly reactive acylnitroso species from hydroxamic acid derivatives. The conditions are shown to be comparable to a previously developed transition metal aerobic oxidation and are amenable to a range of transformations including Diels-Alder and ene reactions. This unique application of such an approach gives access to temporal and spatial control in nitroso chemistry.

The development of mechanochromic molecules has opened new pathways for the study of localized stress and failure in polymers. Their application as stress or temperature diagnostics, however, requires suitable measurement techniques capable of detecting the force- and temperature-sensitive chemical species with high spatial resolution. Confocal imaging techniques offer excellent spatial resolution but the energy input during these measurements can itself affect the activation state of the mechanochromic species. Here, we present a systematic study of the effects of laser-based imaging on the activation and fluorescence behavior of mechanochromic spiropyran (SP) integrated into poly(methyl acrylate) (PMA) and poly(methyl methacrylate) matrices using a confocal Raman microspectrometer. Localized stress and temperature activation were studied by means of high-rate compressive loading and dynamic fracture. Laser illumination of SP in PMA revealed a strong excitation wavelength- and power-dependence. Suitable correction functions were established and used to account for the observed laser effects. The presented study demonstrates that confocal imaging using conventional Raman spectrometers is a powerful characterization tool for localized stress analysis in mechanochromic polymers, offering quantifiable information on the activation state with high spatial resolution. However, laser-mechanophore interactions must be well understood and effects of laser excitation and exposure times must be taken into consideration when interpreting the obtained results.

It is demonstrated that nitrosocarbonyl hetero-Diels-Alder chemistry is an efficient and versatile reaction that can be applied in macromolecular synthesis. Polyethylene glycol functionalized with a hydroxamic acid moiety undergoes facile coupling with cyclopentadiene-terminated polystyrene, through a copper-catalyzed as well as thermal hetero-Diels-Alder reaction. The mild and orthogonal methods used to carry out this reaction make it an attractive method for the synthesis of block copolymers. The resulting block copolymers were analyzed and characterized using GPC and NMR. The product materials could be subjected to thermal retro [4 + 2] cycloaddition, allowing for the liberation of the individual polymer chains and subsequent recycling of the diene-terminated polymers. © 2014 American Chemical Society.

4-Hydroxycyclopentenones represent a privileged scaffold in chemical synthesis. A dysprosium(III) trifluoromethanesulfonate catalyzed rearrangement of furylcarbinols to 4-hydroxycyclopentenones via a 4π electrocyclization has been developed. The catalytic Piancatelli rearrangement affords a single trans-diastereomer from both aryl and alkyl substituted furylcarbinols.

The acid-catalyzed rearrangement of furylcarbinols is utilized to access 4,5-substituted cyclopentenones. This cascade transformation began with implementing anilines, as an alternative nucleophile to water as used in the Piancatelli rearrangement, and has currently progressed through an intramolecular rearrangement to the use of alcohols as the nucleophile. © Georg Thieme Verlag Stuttgart · New York.

A molecular rearrangement of 5,5-spirocyclic cyclopentenones to 5,6-fused cyclopentenones catalyzed by Amberlyst®15 is described. This work emphasizes the utility of renewable resources, such as furfural, that can be transformed into a variety of valuable products. It also highlights the viability of 5,5-spirocycles as intermediates en route to 5,6-fused cyclopentenones. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The article focuses on the research regarding copper-catalyzed aerobic oxidation of hydroxamic acids which leads to mild ene reaction conducted by professor Javier Read de Alaniz and his colleagues from the University of California (USCB) in Santa Barbara, California. It says that the researchers sought to uncover mild and chemoselective oxidation protocol which could enable acylnitroso compound generation from hydroxamic acids. The processes of the research were explained by professor Javier.

A robust method is described to synthesize degradable copolymers under aqueous miniemulsion conditions using α-lipoic acid as a cheap and scalable building block. Simple formulations of α-lipoic acid (up to 10 mol %), n -butyl acrylate, a surfactant, and a costabilizer generate stable micelles in water with particle sizes <200 nm. The ready availability of these starting materials facilitated performing polymerization reactions at large scales (4 L), yielding 600 g of poly( n -butyl acrylate- stat -α-lipoic acid) latexes that degrade under reducing conditions (250 kg mol -1 → 20 kg mol -1 ). Substitution of α-lipoic acid with ethyl lipoate further improves the solubility of dithiolane derivatives in n -butyl acrylate, resulting in copolymers that degrade to even lower molecular weights after polymerization and reduction. In summary, this convenient and scalable strategy provides access to large quantities of degradable copolymers and particles using cheap and commercially available starting materials.

Photoresponsive hydrogels are an emerging class of stimuli-responsive materials that exhibit changes in physical or chemical properties in response to light. Previous investigations have leveraged photothermal mechanisms to achieve reversible changes in hydrogel friction, although few have focused on photochemical means. To date, the tribological properties of photoswitchable hydrogels ( e.g. , friction and lubrication) have remained underexplored. In this work, we incorporated photoresponsive methoxy-spiropyran-methacrylate monomers (methoxy-SP-MA) into a hydrogel network to form a copolymerized system of poly( N -isopropylacrylamide- co -2-acrylamido-2-methylpropane sulfonic acid- co -methoxy-spiropyran-methacrylate) (p(NIPAAm- co -AMPS- co -SP)). We demonstrated repeatable photoresponsive changes to swelling, friction, and stiffness over three light cycles. Our findings suggest that volume changes driven by the decreased hydrophilicity of the methoxy-SP-MA upon light irradiation are responsible for differences in the mechanical and tribological properties of our photoresponsive hydrogels. Our results could inform future designs of photoswitchable hydrogels for applications ranging from biomedical applications to soft robotics.

Light-responsive liquid crystal elastomers (LCEs) are stimuli-responsive materials that facilitate the conversion of light energy into a mechanical response. In this work, a novel polysiloxane-based LCE with donor-acceptor Stenhouse adduct (DASA) side-chains is synthesized using a late-stage functionalization strategy. It is demonstrated that this approach does not compromise the molecular alignment observed in the traditional Finkelmann method. This easy, single-batch process provides a robust platform to access well-aligned, light-responsive LCE films with thickness ranging from 400 µm to a 14-layer stack that is 5 mm thick. Upon irradiation with low-intensity broadband visible light (100-200 mW cm -2 ), these systems undergo 2D planar actuation and complete bleaching. Conversely, exposure to higher-intensity visible light induces bending followed by contraction (300 mW cm -2 ). These processes are repeatable over several cycles. Finally, it is demonstrated how light intensity and the resulting heat generation influences the photothermal stationary state equilibrium of DASA, thereby controlling its photoresponsive properties. This work establishes the groundwork for advancement of LCE-based actuators beyond thin film and UV-light reliant systems., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

Catalyst-free and reversible step-growth Diels-Alder (DA) polymerization has a wide range of applications in polymer synthesis and is a promising method for fabricating recyclable thermoplastics. The effectiveness of polymerization and depolymerization relies on the chemical building blocks, often utilizing furan as the diene and maleimide as the dienophile. Compared to the traditional diene-dienophile or two-component approach that requires precise stoichiometry, cyclopentadiene (Cp) can serve dual roles via self-dimerization. This internally balanced platform offers a route to access high-molecular-weight polymers and a dynamic handle for polymer recycling, which has yet to be explored. Herein, through a reactivity investigation of different telechelic Cp derivatives, the uncontrolled cross-linking of Cp was addressed, revealing the first successful DA homopolymerization. To demonstrate the generality of our methodology, we synthesized and characterized six Cp homopolymers with backbones derived from common thermoplastics, such as poly(dimethylsiloxane), hydrogenated polybutadiene, and ethylene phthalate. Among these materials, the hydrogenated polybutadiene-Cp analog can be thermally depolymerized ( M n = 68 to 23 kDa) and repolymerized to the parent polymer ( M n = 68 kDa) under solvent- and catalyst-free conditions. This process was repeated over three cycles without intermediate purification, confirming the efficient thermo-selective recyclability. The varied degradable properties of the other four Cp-incorporated thermoplastics were also examined. Overall, this work provides a general methodology for accessing a new class of reversible homopolymers, potentially expanding the design and construction of sustainable thermoplastics.

The crystal structures of two inter-mediates, 4-amino-3,5-di-fluoro-benzo-nitrile, C 7 H 4 F 2 N 2 ( I ), and ethyl 4-amino-3,5-di-fluoro-benzoate, C 9 H 9 F 2 NO 2 ( II ), along with a visible-light-responsive azo-benzene derivative, diethyl 4,4'-(diazene-1,2-di-yl)bis-(3,5-di-fluoro-benzoate), C 18 H 14 F 4 N 2 O 4 ( III ), obtained by four-step synthetic procedure, were studied using single-crystal X-ray diffraction. The mol-ecules of I and II demonstrate the quinoid character of phenyl rings accompanied by the distortion of bond angles related to the presence of fluorine substituents in the 3 and 5 ( ortho ) positions. In the crystals of I and II , the mol-ecules are connected by N-H⋯N, N-H⋯F and N-H⋯O hydrogen bonds, C-H⋯F short contacts, and π-stacking inter-actions. In crystal of III , only stacking inter-actions between the mol-ecules are found., (© Novikov et al. 2024.)

Disordered proteins often undergo a stimuli-responsive, disorder-to-order transition which facilitates dynamic processes that modulate the physiological activities and material properties of cells, such as strength, chemical composition, and reflectance. It remains challenging to gain rapid and spatiotemporal control over such disorder-to-order transitions, which limits the incorporation of these proteins into novel materials. The reflectin protein is a cationic, disordered protein whose assembly is responsible for dynamic color camouflage in cephalopods. Stimuli-responsive control of reflectin's assembly would enable the design of biophotonic materials with tunable color. Herein, a novel, multivalent azobenzene photoswitch is shown to be an effective and non-invasive strategy for co-assembling with reflectin molecules and reversibly controlling assembly size. Photoisomerization between the trans and cis ( E and Z ) photoisomers promotes or reduces Coulombic interactions, respectively, with reflectin proteins to repeatedly cycle the sizes of the photoswitch-reflectin assemblies between 70 nm and 40 nm. The protein assemblies formed with the trans and cis isomers show differences in interaction stoichiometry and secondary structure, which indicate that photoisomerization modulates the photoswitch-protein interactions to change assembly size. Our results highlight the utility of photoswitchable interactions to control reflectin assembly and provide a tunable synthetic platform that can be adapted to the structure, assembly, and function of other disordered proteins., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Fast and programmable transport of droplets on a substrate is desirable in microfluidic, thermal, biomedical, and energy devices. Photoresponsive surfactants are promising candidates to manipulate droplet motion due to their ability to modify interfacial tension and generate "photo-Marangoni" flow under light stimuli. Previous works have demonstrated photo-Marangoni droplet migration in liquid media; however, migration on other substrates, including solid and liquid-infused surfaces (LIS), remains an outstanding challenge. Moreover, models of photo-Marangoni migration are still needed to identify optimal photoswitches and assess the feasibility of new applications. In this work, we demonstrate 2D droplet motion on liquid surfaces and on LIS, as well as rectilinear motion in solid capillary tubes. We synthesize photoswitches based on spiropyran and merocyanine, capable of tension changes of up to 5.5 mN/m across time scales as short as 1.7 s. A millimeter-sized droplet migrates at up to 5.5 mm/s on a liquid, and 0.25 mm/s on LIS. We observe an optimal droplet size for fast migration, which we explain by developing a scaling model. The model also predicts that faster migration is enabled by surfactants that maximize the ratio between the tension change and the photoswitching time. To better understand migration on LIS, we visualize the droplet flow using tracer particles, and we develop corresponding numerical simulations, finding reasonable agreement. The methods and insights demonstrated in this study enable advances for manipulation of droplets for microfluidic, thermal and water harvesting devices., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Shear-recoverable hydrogels based on block copolypeptides with rapid self-recovery hold potential in extrudable and injectable 3D-printing applications. In this work, a series of 3-arm star-shaped block copolypeptides composed of an inner hydrophilic poly(l-glutamate) domain and an outer β-sheet forming domain is synthesized with varying side chains and block lengths. By changing the β-sheet forming domains, hydrogels with diverse microstructures and mechanical properties are prepared and structure-function relationships are determined using scattering and rheological techniques. Differences in the properties of these materials are amplified during direct-ink writing with a strong correlation observed between printability and material chemistry. Significantly, it is observed that non-canonical β-sheet blocks based on phenyl glycine form more stable networks with superior mechanical properties and writability compared to widely used natural amino acid counterparts. The versatile design available through block copolypeptide materials provides a robust platform to access tunable material properties based solely on molecular design. These systems can be exploited in extrusion-based applications such as 3D-printing without the need for additives., (© 2023 Wiley-VCH GmbH.)

Donor-acceptor Stenhouse adduct (DASA) photoswitches have gained a lot of attention since their discovery in 2014. Their negative photochromism, visible light absorbance, synthetic tunability, and the large property changes between their photoisomers make them attractive candidates over other commonly used photoswitches for use in materials with responsive or adaptive properties. The development of such materials and their translation into advanced technologies continues to widely impact forefront materials research, and DASAs have thus attracted considerable interest in the field of visible-light responsive molecular switches and dynamic materials. Despite this interest, there have been challenges in understanding their complex behavior in the context of both small molecule studies and materials. Moreover, incorporation of DASAs into polymers can be challenging due to their incompatibility with the conditions for most common polymerization techniques. In this review, therefore, we examine and critically discuss the recent developments and challenges in the field of DASA-containing polymers, aiming at providing a better understanding of the interplay between the properties of both constituents (matrix and photoswitch). The first part summarizes current understanding of DASA design and switching properties. The second section discusses strategies of incorporation of DASAs into polymers, properties of DASA-containing materials, and methods for studying switching of DASAs in materials. We also discuss emerging applications for DASA photoswitches in polymeric materials, ranging from light-responsive drug delivery systems, to photothermal actuators, sensors and photoswitchable surfaces. Last, we summarize the current challenges in the field and venture on the steps required to explore novel systems and expand both the functional properties and the application opportunities of DASA-containing polymers.

Donor-acceptor Stenhouse adducts (DASAs) are an exciting class of photoswitches due to their facile tunability, visible light absorbance, and negative photochromism. While they have shown use in a variety of applications, to date all reported DASA derivatives have low equilibrium and/or poor photoswitching in polar protic solvents, which is vital for moving towards applications in biological systems. We demonstrate a strategy to introduce a substitution on the DASA triene that results in derivatives that are stable and have high dark equilibrium of the open form in polar protic solvents. Decreasing the charge separation of these new derivatives also allows for reversible switching in polar and protic solvents including THF : water mixtures., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Here, we present the synthesis and characterization of statistical and block copolymers containing α-lipoic acid (LA) using reversible addition-fragmentation chain-transfer (RAFT) polymerization. LA, a readily available nutritional supplement, undergoes efficient radical ring-opening copolymerization with vinyl monomers in a controlled manner with predictable molecular weights and low molar-mass dispersities. Because lipoic acid diads present in the resulting copolymers include disulfide bonds, these materials efficiently and rapidly degrade when exposed to mild reducing agents such as tris(2-carboxyethyl)phosphine ( M n = 56 → 3.6 kg mol -1 ). This scalable and versatile polymerization method affords a facile way to synthesize degradable polymers with controlled architectures, molecular weights, and molar-mass dispersities from α-lipoic acid, a commercially available and renewable monomer.

The ability of cells to reorganize in response to external stimuli is important in areas ranging from morphogenesis to tissue engineering. While nematic order is common in biological tissues, it typically only extends to small regions of cells interacting via steric repulsion. On isotropic substrates, elongated cells can co-align due to steric effects, forming ordered but randomly oriented finite-size domains. However, we have discovered that flat substrates with nematic order can induce global nematic alignment of dense, spindle-like cells, thereby influencing cell organization and collective motion and driving alignment on the scale of the entire tissue. Remarkably, single cells are not sensitive to the substrate's anisotropy. Rather, the emergence of global nematic order is a collective phenomenon that requires both steric effects and molecular-scale anisotropy of the substrate. To quantify the rich set of behaviours afforded by this system, we analyse velocity, positional and orientational correlations for several thousand cells over days. The establishment of global order is facilitated by enhanced cell division along the substrate's nematic axis, and associated extensile stresses that restructure the cells' actomyosin networks. Our work provides a new understanding of the dynamics of cellular remodelling and organization among weakly interacting cells.

Spatiotemporally functionalized hydrogels have exciting applications in tissue engineering, but their preparation often relies on radical-based strategies that can be deleterious in biological settings. Herein, the computationally guided design, synthesis, and application of a water-soluble cyclopentadienone-norbornadiene (CPD-NBD) adduct is disclosed as a diene photocage for radical-free Diels-Alder photopatterning. We show that this scalable CPD-NBD derivative is readily incorporated into hydrogel formulations, providing gels that can be patterned with dienophiles upon 365 nm uncaging of cyclopentadiene. Patterning is first visualized through conjugation of cyanine dyes, then biological utility is highlighted by patterning peptides to direct cellular adhesion. Finally, the ease of use and versatility of this CPD-NBD derivative is demonstrated by direct incorporation into a commercial 3D printing resin to enable the photopatterning of structurally complex, printed hydrogels., (© 2023 Wiley-VCH GmbH.)

Surface-aligned liquid-crystal networks (LCNs) offer a solution for developing functional materials capable of performing a range of tasks, including actuation, shape memory, and surfaces patterning. Here we show that Diels-Alder cycloaddition can be used to prepare the backbone of planar aligned LCNs under mild ambient conditions without the addition of additives or UV irradiation. The mechanical properties of the networks have robust viscoelastic modulus and stiffness with a reversible local free volume change upon physical aging. This study shows new opportunities to design surface-aligned LCNs based on additive free step-growth Diels-Alder polymerization and enables the potential to incorporate a wider range of photochromic materials into LCNs.

Aligned liquid crystal polymers are materials of interest for electronic, optic, biological and soft robotic applications. The manufacturing and processing of these materials have been widely explored with mechanical alignment establishing itself as a preferred method due to its ease of use and widespread applicability. However, the fundamental chemistry behind the required two-step polymerization for mechanical alignment has limitations in both fabrication and substrate compatibility. In this work we introduce a new protection-deprotection approach utilizing a two-stage Diels-Alder cyclopentadiene-maleimide step-growth polymerization to enable mild yet efficient, fast, controlled, reproducible and user-friendly polymerizations, broadening the scope of liquid crystal systems. Thorough characterization of the films by DSC, DMA, POM and WAXD show the successful synthesis of a uniaxially aligned liquid crystal network with thermomechanical actuation abilities., (© 2022 Wiley-VCH GmbH.)

Hydrogels hold much promise for 3D printing of functional living materials; however, challenges remain in tailoring mechanical robustness as well as biological performance. In addressing this challenge, the modular synthesis of functional hydrogels from 3-arm diblock copolypeptide stars composed of an inner poly(l-glutamate) domain and outer poly(l-tyrosine) or poly(l-valine) blocks is described. Physical crosslinking due to ß-sheet assembly of these star block copolymers gives mechanical stability during extrusion printing and the selective incorporation of methacrylate units allows for subsequent photocrosslinking to occur under biocompatible conditions. This permits direct ink writing (DIW) printing of bacteria-based mixtures leading to 3D objects with high fidelity and excellent bacterial viability. The tunable stiffness of different copolypeptide networks enables control over proliferation and colony formation for embedded Escherichia coli bacteria as demonstrated via isopropyl ß-d-1-thiogalactopyranoside (IPTG) induction of green fluorescent protein (GFP) expression. This translation of molecular structure to network properties highlights the versatility of these polypeptide hydrogel systems with the combination of writable structures and biological activity illustrating the future potential of these 3D-printed biocomposites., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Triboelectric nanogenerators (TENGs) have received significant attention for next-generation wearable electronics due to their simple device structure and low cost. Although the performance of TENGs is intimately tied to compressibility effects in the charge-generating layer, achieving high compressibility with conventional elastomers is challenging because molecular entanglements place a lower bound on the softness of cross-linked networks. Here, we demonstrate that bottlebrush elastomers are efficient charge-generating layers that improve the output performance of TENGs, including voltage, current, and surface potential, by minimizing entanglements and decreasing the compressive modulus ( E ). For example, a cross-linked bottlebrush with poly(dimethylsiloxane) side chains yielded TENGs with an output voltage (120 V) more than two times larger than a linear PDMS network (55 V). In conclusion, this study highlights the advantage of designing new charge-generating layers with improved compressibility to enhance TENG performance.

Pyrroloindolines bearing a C3-N linkage comprise the core of many biologically active natural products, but many methods toward their synthesis are limited by the sterics or electronics of the product. We report a single electron-based approach for the synthesis of this scaffold and demonstrate high-yielding aminations, regardless of electronic or steric demands. The transformation uses copper wire and isopropanol to promote the reaction. The broad synthetic utility of this heterogeneous copper-catalyzed approach to access pyrroloindolines, diketopiperazine, furoindoline, and (+)-asperazine is included, along with experiments to provide insight into the mechanism of this new process.

The ability of molecular photoswitches to convert on/off responses into large macroscale property change is fundamental to light-responsive materials. However, moving beyond simple binary responses necessitates the introduction of new elements that control the chemistry of the photoswitching process at the molecular scale. To achieve this goal, we designed, synthesized and developed a single photochrome, based on a modified donor-acceptor Stenhouse adduct (DASA), capable of independently addressing multiple molecular states. The multi-stage photoswitch enables complex switching phenomena. To demonstrate this, we show spatial control of the transformation of a three-stage photoswitch by tuning the population of intermediates along the multi-step reaction pathway of the DASAs without interfering with either the first or final stage. This allows for a photonic three-stage logic gate where the secondary wavelength solely negates the input of the primary wavelength. These results provide a new strategy to move beyond traditional on/off binary photochromic systems and enable the design of future molecular logic systems., (© 2022. The Author(s), under exclusive licence to Springer Nature Limited.)

An important but often overlooked feature of Diels-Alder (DA) cycloadditions is the ability for DA adducts to undergo mechanically induced cycloreversion when placed under force. Herein, we demonstrate that the commonly employed DA cycloaddition between furan and maleimide to crosslink hydrogels results in slow gelation kinetics and "mechanolabile" crosslinks that relate to reduced material strength. Through rational computational design, "mechanoresistant" DA adducts were identified by constrained geometries simulate external force models and employed to enhance failure strength of crosslinked hydrogels. Additionally, utilization of a cyclopentadiene derivative, spiro[2.4]hepta-4,6-diene, provided mechanoresistant DA adducts and rapid gelation in minutes at room temperature. This study illustrates that strategic molecular-level design of DA crosslinks can provide biocompatible materials with improved processing, mechanical durability, lifetime, and utility.

The development of noninvasive and robust strategies for manipulation of droplets and bubbles is crucial in applications such as boiling and condensation, electrocatalysis, and microfluidics. In this work, we realize the swift departure of droplets and bubbles from solid substrates by introducing photoresponsive surfactants and applying asymmetric illumination, thereby inducing a "photo-Marangoni" lift force. Experiments show that a pinned toluene droplet can depart the substrate in only 0.38 s upon illumination, and the volume of an air bubble at departure is reduced by 20%, indicating significantly faster departure. These benefits can be achieved with moderate light intensities and dilute surfactant concentrations, without specially fabricated substrates, which greatly facilitates practical applications. Simulations suggest that the net departure force includes contributions from viscous stresses directly caused by the Marangoni flow, as well as from pressure buildup due to flow stagnation at the contact line. The manipulation scheme proposed here shows potential for applications requiring droplet and bubble removal from working surfaces., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

DFT calculations were used to find an optimal substitution site on the triene backbone of a donor-acceptor Stenhouse adduct photoswitch to tune the equillibrium and switching kinetics of DASA without modifying the donor and acceptor groups. Using this approach we demonstrate a new means to tuning DASA based photoswitches by increasing the energy of the closed form relative to the open form. To highlight the potential of this approach a new DASA derivative bearing a methyl substituent on the 5-position of the triene was synthesized and the effect of this substitution was studied using 1 H NMR spectroscopy, time-dependent UV-Vis and solvatochromic analysis. The new DASA derivative shows a higher dark equillibrium, favoring the open form, and drastically faster thermal recovery than the unsubstituted derivative with the same donor and acceptor.

Cationic conjugated oligoelectrolytes (COEs) are a class of compounds that can be tailored to achieve relevant in vitro antimicrobial properties with relatively low cytotoxicity against mammalian cells. Three distyrylbenzene-based COEs were designed containing amide functional groups on the side chains. Their properties were compared to two representative COEs with only quaternary ammonium groups. The optimal compound, COE2-3C-C3-Apropyl, has an antimicrobial efficacy against Escherichia coli with an MIC=2 μg mL -1 , even in the presence of human serum albumin low cytotoxicity (IC 50 =740 μg mL -1 ) and minimal hemolytic activity. Moreover, we find that amide groups increase interactions between COEs and a bacterial lipid mimic based on calcein leakage assay and allow COEs to readily permeabilize the cytoplasmic membrane of E. coli. These findings suggest that hydrogen bond forming moieties can be further applied in the molecular design of antimicrobial COEs to further improve their selectivity towards bacteria., (© 2022 The Authors. Published by Wiley-VCH GmbH.)

Photosurfactants have shown considerable promise for enabling stimuli-responsive control of the properties and motion of fluid interfaces. Recently, a number of photoswitch chemistries have emerged to tailor the photoresponsive properties of photosurfactants. However, systematic studies investigating how photoresponsive surfactant behavior depends on the photochemical and photophysical properties of the switch remain scarce. In this work, we develop synthetic schemes and surfactant designs to produce a well-controlled library of photosurfactants to comparatively assess the behavior of photoswitch chemistry on interfacial behavior. We employ photoinduced spreading of droplets at fluid interfaces as a model for such studies. We show that although photosurfactant response is largely guided by expected trends with changes in polarity of the photoswitch, interfacial behavior also depends nontrivially and sometimes counter-intuitively on the kinetics and mechanisms of photoswitching, particularly at the interface of two solvents, as well as on complex interactions with other surfactants. Understanding these complexities enables the design of new photosurfactant systems and their optimization toward responsive functions including triggered spreading, dewetting, and destabilization of droplets on solid and fluid surfaces.

A new Diels-Alder (DA)-based photopatterning platform is presented, which exploits the irreversible, light-induced decarbonylation and subsequent cleavage of cyclopentadienone-norbornadiene (CPD-NBD) adducts. A series of CPD-NBD adducts have been prepared and systematically studied toward the use in a polymeric material photopatterning platform. By incorporating an optimized CPD-NBD adduct into polymer networks, it is demonstrated that cyclopentadiene may be unveiled upon 365 nm irradiation and subsequently clicked to a variety of maleimides with spatial control under mild reaction conditions and with fast kinetics. Unlike currently available photoinduced Diels-Alder reactions that rely on trapping transient, photocaged dienes, this platform introduces a persistent, yet highly reactive diene after irradiation, enabling the use of photosensitive species such as cyanine dyes to be patterned. To highlight the potential use of this platform in a variety of material applications, we demonstrate two proof-of-concepts: patterned conjugation of multiple dyes into a polyacrylate network and preprogrammed ligation of streptavidin into poly(ethylene glycol) hydrogels.

As the scope of additive manufacturing broadens, interest has developed in 3D-printed objects that are derived from recyclable resins with chemical and mechanical tunability. Dynamic covalent bonds have the potential to not only increase the sustainability of 3D-printed objects, but also serve as reactive sites for postprinting derivatization. In this study, we use boronate esters as a key building block for the development of catalyst-free, 3D-printing resins with the ability to undergo room-temperature exchange at the cross-linking sites. The orthogonality of boronate esters is exploited in fast-curing, oxygen-tolerant thiol-ene resins in which the dynamic character of 3D-printed objects can be modulated by the addition of a static, covalent cross-linker with no room-temperature bond exchange. This allows the mechanical properties of printed parts to be varied between those of a traditional thermoset and a vitrimer. Objects printed with a hybrid dynamic/static resin exhibit a balance of structural stability (residual stress = 18%) and rapid exchange (characteristic relaxation time = 7 s), allowing for interfacial welding and postprinting functionalization. Modulation of the cross-linking density postprinting is enabled by selective hydrolysis of the boronate esters to generate networks with swelling capacities tunable from 1.3 to 3.3.

We introduce a novel grafting-through polymerization strategy to synthesize dynamic bottlebrush polymers and elastomers in one step using light to construct a disulfide-containing backbone. The key starting material-α-lipoic acid (LA)-is commercially available, inexpensive, and biocompatible. When installed on the chain end(s) of poly(dimethylsiloxane) (PDMS), the cyclic disulfide unit derived from LA polymerizes under ultraviolet (UV) light in ambient conditions. Significantly, no additives such as initiator, solvent, or catalyst are required for efficient gelation. Formulations that include bis-LA-functionalized cross-linker yield bottlebrush elastomers with high gel fractions (83-98%) and tunable, supersoft shear moduli in the ∼20-200 kPa range. An added advantage of these materials is the dynamic disulfide bonds along each bottlebrush backbone, which allow for light-mediated self-healing and on-demand chemical degradation. These results highlight the potential of simple and scalable synthetic routes to generate unique bottlebrush polymers and elastomers based on PDMS.

Donor-acceptor Stenhouse adducts (DASAs) are visible-light-responsive photoswitches with a variety of emerging applications in photoresponsive materials. Their two-step modular synthesis, centered on the nucleophilic ring opening of an activated furan, makes DASAs readily accessible. However, the use of less reactive donors or acceptors renders the process slow and low yielding, which has limited their development. We demonstrate here that 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) promotes the ring-opening reaction and stabilizes the open isomer, allowing greatly reduced reaction times and increased yields for known derivatives. In addition, it provides access to previously unattainable DASA-based photoswitches and DASA-polymer conjugates. The role of HFIP and the photochromic properties of a set of new DASAs is probed using a combination of 1 H NMR and UV/Vis spectroscopy. The use of sterically hindered, electron-poor amines enabled the dark equilibrium to be decoupled from closed-isomer half-lives for the first time., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The effects of solution-state dielectric and intermolecular interactions on the degree of charge separation provide a route to understanding the switching properties and concentration dependence of donor-acceptor Stenhouse adducts (DASAs). Through solvatochromic analysis of the open-form DASA in conjunction with X-ray diffraction and computational theory, we have analyzed the ionic character of a series of DASAs. First- and third-generation architectures lead to a higher zwitterionic resonance contribution of the open form and a zwitterionic closed form, whereas the second-generation architecture possesses a less charge-separated open form and neutral closed form. This can be correlated with equilibrium control and photoswitching solvent compatibility. As a result of the high contribution of the zwitterionic resonance forms of first- and third-generation DASAs, we were able to control their switching kinetics by means of ion concentration, whereas second-generation DASAs were less affected. Importantly, these results show how the previously reported concentration dependence of DASAs is not universal, and that DASAs with a more hybrid structure in the open form can achieve photoswitching at high concentrations., (© 2020 Wiley-VCH GmbH.)

Polymers that are elastic while supporting charge transport are desirable for flexible and soft electronics. Many polymers with bulky and conjugated redox-active pendant units have high glass transition temperatures ( T g ) in their neutral form that will not lead to elasticity at room temperature. Their behavior in charged form in the solid state without an electrolyte has not been extensively studied. Here, the design strategy of polymeric ionic liquid where two weakly interacting ionic groups are used to maintain a low T g is shown to lead to flexible redox active polymers. The use of a flexible ethylene backbone and redox-active phenothiazine (PTZ)-based pendant group resulted in polymers with relatively low T g that are electrically conductive. PTZ that was N-substituted with 2-(2-ethoxyethoxy)ethoxy)ethyl was found to promote solubility of the polymer and lower the T g of the neutral polymer by ∼150 °C relative to that of the T g of a variant without the N-substituent. Doping with trifluoromethanesulfonimide leads to an electrically conductive polymer without significantly increasing the T g . Physical characterization by UV-vis-NIR spectroscopy, electron spin resonance spectroscopy, and impedance spectroscopy verified that the molecular design leads to an efficient charge hopping between the PTZ groups.

Self-healing polymer electrolytes are reported with light-switchable conductivity based on dynamic N -donor ligand-containing diarylethene (DAE) and multivalent Ni 2+ metal-ion coordination. Specifically, a polystyrene polymer grafted with poly(ethylene glycol- r -DAE)acrylate copolymer side chains was effectively cross-linked with nickel(II) bis(trifluoromethanesulfonimide) (Ni(TFSI) 2 ) salts to form a dynamic network capable of self-healing with fast exchange kinetics under mild conditions. Furthermore, as a photoswitching compound, the DAE undergoes a reversible structural and electronic rearrangement that changes the binding strength of the DAE-Ni 2+ complex under irradiation. This can be observed in the DAE-containing polymer electrolyte where irradiation with UV light triggers an increase in the resistance of solid films, which can be recovered with subsequent visible light irradiation. The increase in resistance under UV light irradiation indicates a decrease in ion mobility after photoswitching, which is consistent with the stronger binding strength of ring-closed DAE isomers with Ni 2+ . 1 H- 15 N heteronuclear multiple-bond correlation nuclear magnetic resonance (HMBC NMR) spectroscopy, continuous wave electron paramagnetic resonance (cw EPR) spectroscopy, and density functional theory (DFT) calculations confirm the increase in binding strength between ring-closed DAE with metals. Rheological and in situ ion conductivity measurements show that these polymer electrolytes efficiently heal to recover their mechanical properties and ion conductivity after damage, illustrating potential applications in smart electronics.