Search

Quantum low-density parity-check (QLDPC) codes have been proven to achieve higher minimum distances at higher code rates than surface codes. However, this family of codes imposes stringent latency requirements and poor performance under iterative decoding, especially when the variable degree is low. In this work, we improve both the error correction performance and decoding latency of variable degree-3 (dv-3) QLDPC codes under iterative decoding. Firstly, we perform a detailed analysis of the structure of a well-known family of QLDPC codes, i.e., hypergraph product-based codes. Then, we propose a decoding approach that stems from the knowledge of harmful configurations apparent in these codes. Our decoding scheme is based on applying a modified version of bit flipping (BF) decoding, namely two-bit bit flipping (TBF) decoding, which adds more degrees of freedom to BF decoding. The granularity offered by TBF decoding helps us design sets of decoders that operate in parallel and can collectively decode error patterns appearing in harmful configurations of the code, thus addressing both the latency and performance requirements. Finally, simulation results demonstrate that the proposed decoding scheme surpasses other iterative decoding approaches for various dv-3 QLDPC codes., Comment: 13 pages, 12 figures

Quantum low-density parity-check (qLDPC) codes can achieve high encoding rates and good code distance scaling, providing a promising route to low-overhead fault-tolerant quantum computing. However, the long-range connectivity required to implement such codes makes their physical realization challenging. Here, we propose a hardware-efficient scheme to perform fault-tolerant quantum computation with high-rate qLDPC codes on reconfigurable atom arrays, directly compatible with recently demonstrated experimental capabilities. Our approach utilizes the product structure inherent in many qLDPC codes to implement the non-local syndrome extraction circuit via atom rearrangement, resulting in effectively constant overhead in practically relevant regimes. We prove the fault tolerance of these protocols, perform circuit-level simulations of memory and logical operations with these codes, and find that our qLDPC-based architecture starts to outperform the surface code with as few as several hundred physical qubits at a realistic physical error rate of $10^{-3}$. We further find that less than 3000 physical qubits are sufficient to obtain over an order of magnitude qubit savings compared to the surface code, and quantum algorithms involving thousands of logical qubits can be performed using less than $10^5$ physical qubits. Our work paves the way for explorations of low-overhead quantum computing with qLDPC codes at a practical scale, based on current experimental technologies.

Best and practical watermarking schemes for copyright protection of 3D meshes are required to be blind and robust to attacks and errors. In this paper, we present the latest developments in 3D blind watermarking with a special emphasis on our Ordered Statistics Vertex Extraction and Tracing Algorithm (OSVETA) algorithm and its improvements. OSVETA is based on a combination of quantization index modulation (QIM) and error correction coding using novel ways for judicial selection of mesh vertices which are stable under mesh simplification, and the technique we propose in this paper offers a systematic method for vertex selection based on neural networks replacing a heuristic approach in the OSVETA. The Neuro-OSVETA enables a more precise mesh geometry estimation and better curvature and topological feature estimation. These enhancements result in a more accurate identification of stable vertices resulting in significant reduction of deletion probability., Comment: 10 pages, 5 figures

Recent constructions of quantum low-density parity-check (QLDPC) codes provide optimal scaling of the number of logical qubits and the minimum distance in terms of the code length, thereby opening the door to fault-tolerant quantum systems with minimal resource overhead. However, the hardware path from nearest-neighbor-connection-based topological codes to long-range-interaction-demanding QLDPC codes is a challenging one. Given the practical difficulty in building a monolithic architecture for quantum computers based on optimal QLDPC codes, it is worth considering a distributed implementation of such codes over a network of interconnected quantum processors. In such a setting, all syndrome measurements and logical operations must be performed using high-fidelity shared entangled states between the processing nodes. Since probabilistic many-to-1 distillation schemes for purifying entanglement are inefficient, we investigate quantum error correction based entanglement purification in this work. Specifically, we employ QLDPC codes to distill GHZ states, as the resulting high-fidelity logical GHZ states can interact directly with the code used to perform distributed quantum computing (DQC), e.g. for fault-tolerant Steane syndrome extraction. This protocol is applicable beyond DQC since entanglement purification is a quintessential task of any quantum network. We use the min-sum algorithm (MSA) based iterative decoder for distilling $3$-qubit GHZ states using a rate $0.118$ family of lifted product QLDPC codes and obtain an input threshold of $\approx 0.7974$ under i.i.d. single-qubit depolarizing noise. This represents the best threshold for a yield of $0.118$ for any GHZ purification protocol. Our results apply to larger size GHZ states as well, where we extend our technical result about a measurement property of $3$-qubit GHZ states to construct a scalable GHZ purification protocol., Comment: Final accepted version in Quantum; includes a new algorithm to generate logical Pauli operators for stabilizer codes; our software is available at: https://github.com/nrenga/ghz_distillation_qec/tree/main/qldpc-ghz_protocol_II and https://zenodo.org/record/8284903. arXiv admin note: substantial text overlap with arXiv:2109.06248

Quantum errors are primarily detected and corrected using the measurement of syndrome information which itself is an unreliable step in practical error correction implementations. Typically, such faulty or noisy syndrome measurements are modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this "soft" or analog information without the conventional discretization step to benefit the iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the syndrome-soft information to successfully correct both data and syndrome errors simultaneously, without repeated measurements. We demonstrate the advantages of extracting the soft information from the syndrome in our improved decoders, not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families, but also for faster convergence of iterative decoders. In particular, the new BP decoder with noisy syndrome performs as good as the standard BP decoder under ideal syndrome., Comment: 7 pages, 5 figures, IEEEtran-double column format

Quantum error correction has recently been shown to benefit greatly from specific physical encodings of the code qubits. In particular, several researchers have considered the individual code qubits being encoded with the continuous variable GottesmanKitaev-Preskill (GKP) code, and then imposed an outer discrete-variable code such as the surface code on these GKP qubits. Under such a concatenation scheme, the analog information from the inner GKP error correction improves the noise threshold of the outer code. However, the surface code has vanishing rate and demands a lot of resources with growing distance. In this work, we concatenate the GKP code with generic quantum low-density parity-check (QLDPC) codes and demonstrate a natural way to exploit the GKP analog information in iterative decoding algorithms. We first show the noise thresholds for two lifted product QLDPC code families, and then show the improvements of noise thresholds when the iterative decoder - a hardware-friendly min-sum algorithm (MSA) - utilizes the GKP analog information. We also show that, when the GKP analog information is combined with a sequential update schedule for MSA, the scheme surpasses the well-known CSS Hamming bound for these code families. Furthermore, we observe that the GKP analog information helps the iterative decoder in escaping harmful trapping sets in the Tanner graph of the QLDPC code, thereby eliminating or significantly lowering the error floor of the logical error rate curves. Finally, we discuss new fundamental and practical questions that arise from this work on channel capacity under GKP analog information, and on improving decoder design and analysis., Comment: Revised version - Accepted for publication in Quantum. Two column format, 24 pages and 10 figures. Added QC-QLDPC codes used for simulations in Appendix

Entanglement distillation is a well-studied problem in quantum information, where one typically starts with $n$ noisy Bell pairs and distills $k$ Bell pairs of higher fidelity. While distilling Bell pairs is the canonical setting, it is important to study the distillation of multipartite entangled states because these can be useful for realizing distributed algorithms on quantum networks. In this paper, we study the distillation of GHZ states using quantum error correcting codes (QECCs). Using the stabilizer formalism, we begin by explaining the QECC-based Bell pair distillation protocol in arXiv:0708.3699, which relies particularly on the transpose symmetry between Alice's and Bob's qubits in Bell states. Extending this idea, we show that, given $n$ GHZ states, performing a matrix on Alice's qubits is equivalent to performing a "stretched" version of the transpose of the matrix on the qubits of Bob and Charlie. We call this mapping to the stretched version of the matrix the GHZ-map, and show that it is an algebra homomorphism. Using this property, we show that Alice projecting her qubits onto an $[[n,k]]$ stabilizer code implies the simultaneous projection of Bob's and Charlie's qubits onto an induced $[[2n,k]]$ stabilizer code. Guided by this insight, we develop a GHZ distillation protocol based on local operations and classical communication that uses any stabilizer code. Inspired by stabilizer measurements on GHZ states, we also develop a new algorithm to generate logical Pauli operators of any stabilizer code and use it in the protocol. Since quantum codes with finite rate and almost linear minimum distance have recently been discovered, this paper paves the way for high-rate high-output-fidelity GHZ distillation. We provide simulation results on the $5$-qubit perfect code to emphasize the importance of the placement of a certain local Clifford operation in the protocol., Comment: Main paper: 19 pages, single column, IEEEtran class, 3 figures, 2 tables (protocol examples), 3 pseudo-codes. Implementation online: https://github.com/nrenga/ghz_distillation_qec. Comments welcome!

Decoder diversity is a powerful error correction framework in which a collection of decoders collaboratively correct a set of error patterns otherwise uncorrectable by any individual decoder. In this paper, we propose a new approach to design the decoder diversity of finite alphabet iterative decoders (FAIDs) for Low-Density Parity Check (LDPC) codes over the binary symmetric channel (BSC), for the purpose of lowering the error floor while guaranteeing the waterfall performance. The proposed decoder diversity is achieved by training a recurrent quantized neural network (RQNN) to learn/design FAIDs. We demonstrated for the first time that a machine-learned decoder can surpass in performance a man-made decoder of the same complexity. As RQNNs can model a broad class of FAIDs, they are capable of learning an arbitrary FAID. To provide sufficient knowledge of the error floor to the RQNN, the training sets are constructed by sampling from the set of most problematic error patterns - trapping sets. In contrast to the existing methods that use the cross-entropy function as the loss function, we introduce a frame-error-rate (FER) based loss function to train the RQNN with the objective of correcting specific error patterns rather than reducing the bit error rate (BER). The examples and simulation results show that the RQNN-aided decoder diversity increases the error correction capability of LDPC codes and lowers the error floor., Comment: 7 pages, 3 figures, 3 tables. A shorter version is submitted to the International Symposium on Topics in Coding, 2021

Iterative decoders for finite length quantum low-density parity-check (QLDPC) codes are attractive because their hardware complexity scales only linearly with the number of physical qubits. However, they are impacted by short cycles, detrimental graphical configurations known as trapping sets (TSs) present in a code graph as well as symmetric degeneracy of errors. These factors significantly degrade the decoder decoding probability performance and cause so-called error floor. In this paper, we establish a systematic methodology by which one can identify and classify quantum trapping sets (QTSs) according to their topological structure and decoder used. The conventional definition of a TS from classical error correction is generalized to address the syndrome decoding scenario for QLDPC codes. We show that the knowledge of QTSs can be used to design better QLDPC codes and decoders. Frame error rate improvements of two orders of magnitude in the error floor regime are demonstrated for some practical finite-length QLDPC codes without requiring any post-processing., Comment: Revised version - 19 pages, 12 figures - Accepted for publication in Quantum