Search

We have demonstrated a unique reductive coupling of 4-iodophenyl isocyanide, facilitated by a perimidine-based N-heterocyclic germylene (NHGe), which yields a bis-spirogerma compound featuring simultaneous C-C and C-N bond formation. This reaction, which leads to the oxidation of germanium from +2 to +4, represents a significant departure from previously documented isocyanide-germylene interactions. The product exhibits extensive conjugation across its bicyclic C 4 Ge 2 N 2 framework, conferring distinct photophysical properties, including prominent orange luminescence in both solution and solid states. The photophysical properties are supported by the TD-DFT calculations confirming an n→π* transition. The potential application of this compound in optoelectronic devices, particularly as a hole transport layer in PbS quantum dot solar cells, is also explored, with promising preliminary results., (© 2024 Wiley-VCH GmbH.)

The wide tunability of the energy bandgap of colloidal lead sulfide (PbS) quantum dots (QDs) has uniquely positioned them for the development of single junction and tandem solar cells. While there have been substantial advancements in moderate and narrow bandgap PbS QDs-ideal for single junction solar cells and the bottom cell in tandem solar cells, respectively; progress has been limited in high-bandgap PbS QDs that are ideally suited for the formation of the top cell in tandem solar cells. The development of appropriate high bandgap PbS QDs would be a major advancement toward realizing efficient all-QD tandem solar cells utilizing different sizes of PbS QDs. Here, we report a comprehensive approach encompassing synthetic strategy, ligand engineering, and hole transport layer (HTL) modification to implement high-bandgap PbS QDs into solar cell devices. We achieved a greater degree of size homogeneity in high-bandgap PbS QDs through the use of a growth retarding agent and a partial passivation strategy. By adjusting the ligand polarity, we successfully grow HTL over the QD film to fabricate solar cells. With the aid of an interface modifying layer, we incorporated an organic HTL for the realization of high-performance solar cells. These solar cells exhibited an impressive open-circuit voltage of 0.824 V and a power conversion efficiency of 10.7%, marking a 360% improvement over previous results.

Introduction: Pleural effusion is due to the pathological accumulation of pleural fluid in the pleural space, 25%-30% of which may remain undiagnosed despite the combination of biochemical, microbiological, and pathological tests and closed pleural biopsy. Medical thoracoscopy may help physicians diagnose such cases. We aimed to study the diagnostic yield of medical thoracoscopy in patients with undiagnosed exudative pleural effusion and assess the safety profile of the medical thoracoscopy., Methodology: A cross-sectional descriptive study was conducted on 105 patients with undiagnosed pleural effusion. Medical thoracoscopy was performed using an Olympus semi-rigid thoracoscope (LTF 160 Evis Pleurovideoscope, Japan) as per standard protocol. Multiple pleural biopsies were taken and sent for histopathology examination, NAAT (nucleic acid amplification test), and MGIT (mycobacteria growth indicator tube). Post-procedure, the patients were evaluated for any complications., Results: A total of 105 patients were enrolled in the study. The mean ± SD age was 55.1 ± 13.6 years. Sixty-three (60%) patients were males. The diagnostic utility of medical thoracoscopy was found in 94 (89.5%) patients. The diagnosis of tuberculosis (TB) was made in 34 (32.3%) patients, and 48 (45.7%) patients were diagnosed with malignant pleural effusion. Adenocarcinoma of the lung was the most common malignancy diagnosed (32 patients, 66.6%). Five (5.31%) patients had dual etiology of pleural effusion: tubercular and malignancy. The most common complication was chest pain following the procedure (99.4%). One patient developed pneumomediastinum and was managed conservatively. There were no major adverse events after the procedure., Conclusions: Medical thoracoscopy has a high diagnostic yield and favorable safety profile with minimal complications. Excessive reliance on the level of ADA (adenosine deaminase) may further delay the diagnosis. Dual etiologies like TB coexisting with malignancy should be considered in TB high-burden countries., Competing Interests: Human subjects: Consent was obtained or waived by all participants in this study. Institute Ethics Committee, All India Institute of Medical Sciences, Raipur issued approval AIIMSRPR/IEC/2022/1056. Animal subjects: All authors have confirmed that this study did not involve animal subjects or tissue. Conflicts of interest: In compliance with the ICMJE uniform disclosure form, all authors declare the following: Payment/services info: All authors have declared that no financial support was received from any organization for the submitted work. Financial relationships: All authors have declared that they have no financial relationships at present or within the previous three years with any organizations that might have an interest in the submitted work. Other relationships: All authors have declared that there are no other relationships or activities that could appear to have influenced the submitted work., (Copyright © 2024, Behera et al.)

Background: The prevalence of small airway dysfunction (SAD) in patients with chronic obstructive pulmonary disease (COPD) across different ethnicities is poorly understood. This study aimed to estimate the prevalence of SAD in stable COPD patients., Methods: We conducted a cross-sectional study of 196 consecutive stable COPD patients. We measured pre- and post-bronchodilator (BD) lung function and respiratory impedance. The severity of COPD and lung function abnormalities was graded in accordance with the Global Initiative for Chronic Obstructive Lung Disease (GOLD) guidelines. SAD was defined as either difference in whole-breath resistance at 5 and 19 Hz > upper limit of normal or respiratory system reactance at 5 Hz < lower limit of normal., Results: The cohort consisted of 95.9% men, with an average age of 66.3 years. The mean forced expiratory volume 1 second (FEV1) % predicted was 56.4%. The median COPD assessment test (CAT) scores were 14. The prevalence of post-BD SAD across the GOLD grades 1 to 4 was 14.3%, 51.1%, 91%, and 100%, respectively. The post-BD SAD and expiratory flow limitation at tidal breath (EFLT) were present in 62.8% (95% confidence interval [CI], 56.1 to 69.9) and 28.1% (95% CI, 21.9 to 34.2), respectively. COPD patients with SAD had higher CAT scores (15.5 vs. 12.8, p<0.01); poor lung function (FEV1% predicted 46.6% vs. 72.8%, p<0.01); lower diffusion capacity for CO (4.8 mmol/min/kPa vs. 5.6 mmol/min/kPa, p<0.01); hyperinflation (ratio of residual volume to total lung capacity % predicted: 159.7% vs. 129%, p<0.01), and shorter 6-minute walk distance (367.5 m vs. 390 m, p=0.02)., Conclusion: SAD is present across all severities of COPD. The prevalence of SAD increases with disease severity. SAD is associated with poor lung function and higher symptom burden. Severe SAD is indicated by the presence of EFLT.

Over the past few years, two-dimensional transition metal dichalcogenides (2D-TMDC) have attracted huge attention due to their high mobility, high absorbance, and high performance in generating excitons (electron and hole pairs). Especially, 2D molybdenum disulfide (MoS 2 ) has been extensively used in optoelectronic and photovoltaic applications. Due to the low photo-to-dark current ratio ( I photo/dark ) and low speed, pristine MoS 2 -based devices are unsuitable for these applications. So, they need some improvements, i.e. , by adding layers or decorating with materials of complementary majority charges. In this work, we decorated pristine MoS 2 with reduced graphene oxide (rGO) and got improved dark current, I photo/dark , and response time. When we compared the performance of pristine MoS 2 based device and rGO decorated MoS 2 based device, the rGO/MoS 2 -based device showed an improved performance of responsivity of 3.36 A W -1 , along with an I photo/dark of about 154. The heterojunction device exhibited a detectivity of 4.75 × 10 12 Jones, along with a very low response time of 0.184 ms. The stability is also outstanding having the same device performance even after six months.

The data storage requirement in the digital world is increasing day by day with the advancement of the internet of things. In this respect, nonvolatile resistive random-access memory is an option that provides high density and low power data storage capabilities. In this work, zero-dimensional colloidal CdS quantum dots and a polymer composite at an appropriate ratio were used to fabricate a memristive device. Comparison with a pristine CdS quantum dot-based device reveals that a surrounding matrix around the quantum dots is needed for observing memristive behavior. The quantum dots embedded in the polymer matrix device showed extremely stable electrical switching behavior that can be operated for more than 300 cycles and 60 000 seconds. Moreover, the device needs extremely low power to operate at a very high speed. The smooth surface morphology dictates a charge trapping mechanism for the switching phenomenon; however, an interplay between different charge transport mechanisms leads to the fast switching and high on-off ratio of the device.

Purpose: In the wake of the coronavirus disease 2019 (COVID-19) pandemic, support in clinical trials by students of human medicine and related disciplines has become of even greater importance than in pre-pandemic times. Documentation in clinical trials adheres to the principles of Good Clinical Practice (GCP), and healthcare professionals involved in the conduct of clinical trials-including students-are obliged to perform documentation in accordance with GCP principles. Unprecedented challenges have arisen with regard to the appropriate training of students as training courses in presence had largely to be suspended due to social-distancing regulations during the heyday of the COVID-19 pandemic. Therefore, novel training formats and self-study training materials for students working in clinical trials are urgently warranted., Methods: To overcome this shortcoming and to define a common quality standard, an interdisciplinary, multiprofessional (physicians, study nurses, medical students), and binational (Germany, The Netherlands) expert panel convened and devised the Students' guide to documentation in clinical trials., Results: Following a brief description of the different roles in clinical trials (e.g., sponsor, (principal) investigator, monitor) and an introduction into the principles of GCP, the documentation of adverse events, concomitant medication, medical history, and quality control are comprehensively discussed. The Guide concludes with a trilingual medical dictionary (English, German, Dutch) and with recommendations of pertinent literature for further reading., Conclusion: Serving both as textbook for self-training and as (quick-) reference work for the daily routine, the Guide has specifically been designed to complement, but not to replace practical training courses for students. While primarily addressed at students of human medicine and related disciplines, the Guide can also be of high relevance and utility to other healthcare professionals involved in the conduct of clinical trials., (© 2022. The Author(s).)

Objective: Veno-venous (V-V) extracorporeal membrane oxygenation (ECMO) is increasingly used to support patients with severe acute respiratory distress syndrome (ARDS). In case of additional cardio-circulatory failure, some experienced centers upgrade the V-V ECMO with an additional arterial return cannula (termed V-VA ECMO). Here we analyzed short- and long-term outcome together with potential predictors of mortality., Design: Multicenter, retrospective analysis between January 2008 and September 2021., Setting: Three tertiary care ECMO centers in Germany (Hannover, Bonn) and Switzerland (Zurich)., Patients: Seventy-three V-V ECMO patients with ARDS and additional acute cardio-circulatory deterioration required an upgrade to V-VA ECMO were included in this study., Measurements and Main Results: Fifty-three patients required an upgrade from V-V to V-VA and 20 patients were directly triple cannulated. Median (Interquartile Range) age was 49 (28-57) years and SOFA score was 14 (12-17) at V-VA ECMO upgrade. Vasoactive-inotropic score decreased from 53 (12-123) at V-VA ECMO upgrade to 9 (3-37) after 24 h of V-VA ECMO support. Weaning from V-VA and V-V ECMO was successful in 47 (64%) and 40 (55%) patients, respectively. Duration of ECMO support was 12 (6-22) days and ICU length of stay was 32 (16-46) days. Overall ICU mortality was 48% and hospital mortality 51%. Two additional patients died after hospital discharge while the remaining patients survived up to two years (with six patients being lost to follow-up). The vast majority of patients was free from higher degree persistent organ dysfunction at follow-up. A SOFA score > 14 and higher lactate concentrations at the day of V-VA upgrade were independent predictors of mortality in the multivariate regression analysis., Conclusion: In this analysis, the use of V-VA ECMO in patients with ARDS and concomitant cardiocirculatory failure was associated with a hospital survival of about 50%, and most of these patients survived up to 2 years. A SOFA score > 14 and elevated lactate levels at the day of V-VA upgrade predict unfavorable outcome., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Erlebach, Wild, Seeliger, Rath, Andermatt, Hofmaenner, Schewe, Ganter, Müller, Putensen, Natanov, Kühn, Bauersachs, Welte, Hoeper, Wendel-Garcia, David, Bode and Stahl.)

Progress in quantum dot (QD)-based solar cells has been underpinned by the improvements in surface passivation and advancements in device engineering. Acute control over the surface properties is crucial to restrict the formation of in-gap trap states and improve the QD coupling in achieving conducting QD films. In this report, we demonstrate a solution-phase hybrid passivation strategy, which is beneficial in removing detrimental hydroxyl traps and improving the coupling between QDs by reducing the interdot distance. Advancement in surface passivation is translated to the long carrier lifetime, higher carrier mobility, and superior protection toward degradations in QD solids. The performance of solar cell devices is increased by 26% to reach an efficiency of 10.6%, compared to the state-of-the-art lead halide passivated solar cells. The improvement in solar cell performance is supported by the reduction of trap states and an 80 nm increase in thickness of the light-absorbing QD layer.

The broad tunability of the energy band gap through size control makes colloidal quantum dots (QDs) promising for the development of photovoltaic devices. Large-size lead sulfide (PbS) QDs, exhibiting a narrow energy band gap, are particularly interesting as they can be used to augment perovskite and c-Si solar cells due to their complementary NIR absorption. However, their complex surface chemistry makes them difficult to process for the development of solar cells. The shape of the QDs transformed from octahedron to cuboctahedron as their size increases, a phenomenon guided by surface energy minimization. As a result, the surface properties change drastically for large-size QDs, which exhibit nonpolar (200) facets and polar (111) facets, as opposed to only (111) facets in small-size QDs. Recent advancements in solution-phase surface passivation strategies, used for the development of high-performance solar cells using the small size and wide band gap QDs, failed to translate a similar enhancement in the case of large-size and narrow band gap QDs. Here, we report a hybrid passivation strategy for large-size and narrow band gap QDs to passivate both (111) and (200) facets, respectively, using inorganic lead triiodide (PbI 3 - ) and organic 3-chloro-1-propanethiol (CPT). By employing charge balance calculation, we identified the desired narrow band gap for QDs to complement the perovskite and c-Si absorption. The distinct choice of the organic ligand CPT enhances the colloidal stability of QDs in the solution phase and improves surface passivation to stop QD fusion in solid films. Photophysical properties show narrower excitonic and emission peaks and a reduction in the Stokes shift. Hybrid passivation leads to a 94% increase in the power conversion efficiency of solar cells and a 74% increase in the external quantum efficiency at the excitonic peak.

Aims: Radiotherapy is predominantly used as one of the treatment modalities to treat local tumor in colorectal cancer (CRC). Hindrance in disease treatment can be attributed to radio-tolerance of cancer stem cells (CSCs) subsistence in the tumor. Understanding the radio-resistant property of CSCs might help in the accomplishment of targeted radiotherapy treatment and increased disease-free survival. Telomeric RAP1 contributes in modulation of various transcription factors leading to aberrant cell proliferation and tumor cell migration. Therefore, we investigated the role of RAP1 in maintaining resistance phenotype and acquired stemness in radio-resistant cells. Main methods: Characterization of HCT116 derived radio-resistant cell (HCT116RR) was performed by cell survival and DNA damage profiling. RAP1 silenced cells were investigated for DNA damage and expression of CSC markers through western blotting and Real-time PCR post-irradiation. Molecular docking and co-immunoprecipitation study were performed to investigate RAP1 and KLF4 interaction followed by RAP1 protein status profiling in CRC patient. Key findings: We established radio-resistant cells, which showed tolerance to radiotherapy and elevated expression of CSC markers along with RAP1. RAP1 silencing showed enhanced DNA damage and reduced expression of CSC markers post-irradiation. We observed strong physical interaction between RAP1 and KLF4 protein. Furthermore, higher RAP1 expression was observed in the tumor of CRC patients. Dataset analysis also revealed that high expression of RAP1 expression is associated with poor prognosis. Significance: We conclude that higher expression of RAP1 implicates its possible role in promoting radio-resistance in CRC cells by modulating DNA damage and CSC phenotype.

Tunable-band-gap colloidal QDs are a potential building block to harvest the wide-energy solar spectrum. The solution-phase surface passivation with lead halide-based halometallate ligands has remarkably simplified the processing of quantum dots (QDs) and enabled the proficient use of materials for the development of solar cells. It is, however, shown that the hallometalate ligand passivated QD ink allows the formation of thick crystalline shell layer, which limits the carrier transport of the QD solids. Organic thiols have long been used to develop QD solar cells using the solid-state ligand exchange approach. However, their use is limited in solution-phase passivation due to poor dispersity of thiol-treated QDs in common solvents. In this report, a joint passivation strategy using thiol and halometallate ligand is developed to prepare the QD ink. The mutually passivated QDs show a 50% reduction in shell thickness, reduced trap density, and improved monodispersity in their solid films. These improvements lead to a 4 times increase in carrier mobility and doubling of the diffusion length, which enable the carrier extraction from a much thicker absorbing layer. The photovoltaic devices show a high efficiency of 10.3% and reduced hysteresis effect. The improvement in surface passivation leads to reduced oxygen doping and improved ambient stability of the solar cells.

Purpose: Radiation therapy is an integral part of current treatment modality for colorectal cancer. Recent studies have revealed the presence of cancer stem-like cells (CSCs) population, in different tumors are responsible for therapeutic resistance and disease relapse, including colorectal cancer with poorer survival rate. Hence, characterization of the effect of Ionizing Radiation (IR) in colorectal cancer may serve to explain possible mechanisms. Material and methods: Parental HCT116 and HCT-15 cells and derived colonospheres were irradiated and dose was optimized based on cell survival assay and cell cycle analysis. DNA damage response (DDR) was elucidated by γH2AX foci formation, COMET assay, and ATM, p-ATM, ERCC1 expression post-treatment. The expression level of developmental marker (β-catenin), CSC markers (CD44, KLF4) and telomeric components (TRF2, RAP1, hTERT) were evaluated. Results: We observed cell survival was more in colonospheres post-irradiation and also exhibited decreased γH2AX foci, olive tail moment, increased ERCC1, and p-ATM expression than its parental counterpart which corresponds to efficient DDR. Differential expression of developmental marker, CSC markers, and telomeric components were observed after irradiation. Conclusion: This study highlighted the presence of CSC phenotype in colonospheres having increased DNA repair capacity. Differential expression of developmental marker, CSC markers and telomeric components between parental and colonospheres may contribute in radio-resistance property of CSCs.

Several pioneering work have established that apart from genetic alterations, epigenetic modifications contribute significantly in tumor progression. Remarkable role of EZH2 in cancer highlights the importance of identifying its targets. Although much emphasis has been placed in recent years in designing drugs and inhibitors targeting EZH2, less effort has been given in exploring its existing targets that will help in understanding the oncogenic role of EZH2 in turn which may provide a more stringent method of targeting EZH2. In the present study, we validated six direct targets of EZH2 that are GPNMB, PMEPA1, CoL5A1, VGLL4, POMT2 and SUMF1 associated with cancer related pathways. Upon EZH2 knockdown, more than two fold increase in the target gene expression was evident. CHIP-qPCR performed in both MCF-7 and MDA-MDA-231 confirmed the in-vivo binding of EZH2 on its identified target. Thirty invasive breast carcinoma cases with their adjacent normal tissues were included in the study. Immunohistochemistry in primary breast tumor tissue array showed tumor dependent expression of EZH2. Array of MERAV expression database revealed the strength of association of EZH2 with its target genes. Real time PCR performed with RNA extracted from breast tumor tissues further authenticated the existing negative correlation between EZH2 and its target genes. Pearson correlation coefficient & statistical significance computed using the matrix provided in the database strengthened the negative correlation between identified target genes and EZH2. KM plotter analysis showed improved relapse-free survival with increased expression of PMEPA1, POMT2, VGLL4 and SUMF1 in breast cancer patients indicating their therapeutic potential. While investigating the relevance of these target genes, different mutations of them were found in breast cancer patients. Seeking the clinical relevance of our study, following our recent publication that reports the role of EZH2 in nicotine-mediated breast cancer development and progression, we observed significant reduced expression of SUMF1 in breast cancer patient samples with smoking history in comparison to never-smoked patient samples.

Herein, we demonstrate for the first time matrix-free deposition of two dimensional (2D) MoS 2 nanosheets as an efficient hole transport layer (HTL) for colloidal lead sulfide (PbS) quantum dot (QD) solar cells. We have developed all-solution-processed n-p-p + architecture solar cells where ZnO nanoparticles were used as an n-type window layer, a PbS QD layer acted as a light absorbing p-type layer and 2D-MoS 2 nanosheets acted as a p + -type hole transport layer. The MoS 2 nanosheets allow better interface with the PbS QD layers. The incorporation of the MoS 2 hole transport layer leads to superior fill factor, higher open circuit voltage and better performance in colloidal PbS QD solar cells. These results show that one layer of MoS 2 nanosheets improves the power conversion efficiency of the device from 0.92% for a hole transport material free device to 2.48%. The present work reveals the development of 2D-MoS 2 nanosheets as a new hole transport layer for the fabrication of cost-effective, durable and efficient colloidal PbS quantum dot solar cells., Competing Interests: All authors declare no conflicts of interest., (This journal is © The Royal Society of Chemistry.)

Colloidal quantum dots (QDs) have emerged as promising materials to harness panchromatic solar light, owing to their size-tunable optoelectronic properties. Advancements in surface passivation strategy and processing technique have contributed immensely to their developments in photovoltaic applications. Recently, surface passivation using halometallate ligands was shown to form a protective shell layer, which reduced the structural and energetic disorder in the QD solid. Here, we report lead sulfide (PbS) QDs coupled to an oriented two-dimensionally (2D) confined crystalline matrix by using a halometallate ligand. The QDs undergo surface reconstruction during the ligand treatment process, which leads to change in their shape, size, and axis length. We show that the 2D matrix is a combination of two distinct crystalline layers consisting of a crystalline Pb-amine complex and a 2D perovskite layer. The thickness of the matrix layer is modulated further by adjusting counter cations, which results in the enhancement in charge carrier mobility, carrier recombination lifetime, and diffusion length in the QD solid. 2D passivated QDs are implemented to fabricate photovoltaic devices with high power conversion efficiency of 9.1%.

The solution-processed quantum dot (QD) solar cell technology has seen significant advancements in recent past to emerge as a potential contender for the next generation photovoltaic technology. In the development of high performance QD solar cell, the surface ligand chemistry has played the important role in controlling the doping type and doping density of QD solids. For instance, lead sulfide (PbS) QDs which is at the forefront of QD solar cell technology, can be made n-type or p-type respectively by using iodine or thiol as the surfactant. The advancements in surface ligand chemistry enable the formation of p-n homojunction of PbS QDs layers to attain high solar cell performances. It is shown here, however, that poor Fermi level alignment of thiol passivated p-type PbS QD hole transport layer with the n-type PbS QD light absorbing layer has rendered the photovoltaic devices from realizing their full potential. Here we develop a control surface oxidation technique using facile ultraviolet ozone treatment to increase the p-doping density in a controlled fashion for the thiol passivated PbS QD layer. This subtle surface modification tunes the Fermi energy level of the hole transport layer to deeper values to facilitate the carrier extraction and voltage generation in photovoltaic devices. In photovoltaic devices, the ultraviolet ozone treatment resulted in the average gain of 18% in the power conversion efficiency with the highest recorded efficiency of 8.98%., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Background: Orphan nuclear receptors ERRα, ERRβ and ERRγ that belong to NR3B or type IV nuclear receptor family are well studied for their role in breast cancer pathophysiology. Their homology with the canonical estrogen receptor dictates their possible contributing role in mammary gland development and disease. Although function and regulation of ERRα, ERRγ and less about ERRβ is reported, role of histone methylation in their altered expression in cancer cells is not studied. Transcriptional activity of nuclear receptors depends on co-regulatory proteins. The present study for the first time gives an insight into regulation of estrogen-related receptors by histone methylation specifically through methyltransferase EZH2 in breast cancer., Methods: Expression of ERRα, ERRβ, ERRγ and EZH2 was assessed by immunohistochemistry in four identical tissue array slides that were prepared as per the protocol. The array slides were stained with ERRα, ERRβ, ERRγ and EZH2 simultaneously. Array data was correlated with expression in MERAV expression dataset. Pearson correlation coeficient r was calculated from the partial matrix expression values available at MERAV database to study the strength of association between EZH2 and three orphan nuclear receptors under study. By western blot and real time PCR, their correlated expression was studied in breast cancer cell lines MCF-7, MDA-MB-231, T47D and MDA-MB-453 including normal breast epithelial MCF-10A cells at both protein and RNA level. Regulation of ERRα, ERRβ, ERRγ by EZH2 was further investigated upon overexpression and silencing of EZH2. The interaction between ERRs and EZH2 was validated in vivo by CHIP-qPCR., Results: We found a negative correlation between estrogen-related receptors and Enhancer of Zeste Homolog 2, a global repressor gene. Immunohistochemistry in primary breast tumors of different grades showed a correlated expression of estrogen-related receptors and EZH2. Their correlated expression was further validated using online MERAV expression dataset where a negative correlation of variable strengths was observed in breast cancer. Ectopic expression of EZH2 in low EZH2-expressing normal breast epithelial cells abrogated their expression and at the same time, its silencing enhanced the expression of estrogen-related receptors in cancerous cells. Global occupancy of EZH2 on ERRα and ERRβ was observed in-vivo., Conclusion: Our findings identify EZH2 as a relevant coregulator for estrogen-related receptors in breast carcinoma.

A rational synthetic method that produces monodisperse and air-stable metal sulfide colloidal quantum dots (CQDs) in organic nonpolar solvents using octyl dithiocarbamic acid (C 8 DTCA) as a sulfur source, is reported. The fast decomposition of metal-C 8 DTCA complexes in presence of primary amines is exploited to achieve this purpose. This novel technique is generic and can be applied to prepare diverse CQDs, like CdS, MnS, ZnS, SnS, and In 2 S 3 , including more useful and in-demand PbS CQDs and plasmonic nanocrystals of Cu 2 S. Based on several control reactions, it is postulated that the reaction involves the in situ formation of a metal-C 8 DTCA complex, which then reacts in situ with oleylamine at slightly elevated temperature to decompose into metal sulfide CQDs at a controlled rate, leading to the formation of the materials with good optical characteristics. Controlled sulfur precursor's reactivity and stoichiometric reaction between C 8 DTCA and metal salts affords high conversion yield and large-scale production of monodisperse CQDs. Tunable and desired crystal size could be achieved by controlling the precursor reactivity by changing the reaction temperature and reagent ratios. Finally, the photovoltaic devices fabricated from PbS CQDs displayed a power conversion efficiency of 4.64% that is comparable with the reported values of devices prepared with PbS CQDs synthesized by the standard methods.

Surface chemistry plays a crucial role in determining the electronic properties of quantum dot solids and may well be the key to mitigate loss processes involved in quantum dot solar cells. Surface ligands help to maintain the shape and size of the individual dots in solid films, to preserve the clean energy band gap of the individual particles and to control charge carrier conduction across solid films, in turn regulating their performance in photovoltaic applications. In this report, we show that the changes in size, shape and functional groups of small chain organic ligands enable us to modulate mobility, dielectric constant and carrier doping density of lead sulfide quantum dot solids. Furthermore, we correlate these results with performance, stability and recombination processes in the respective photovoltaic devices. Our results highlight the critical role of surface chemistry in the electronic properties of quantum dots. The role of the size, functionality and the surface coverage of the ligands in determining charge transport properties and the stability of quantum dot solids have been discussed. Our findings, when applied in designing new ligands with higher mobility and improved passivation of quantum dot solids, can have important implications for the development of high-performance quantum dot solar cells.

RNA imaging probes help us investigate how transport and dynamics of RNA contribute to subcellular RNA localization or regulation of gene expression. Out of the plethora of strategies that have been developed to image RNA in living cells, genetically encoded probes are interesting because they can be produced by the cellular machinery and do not require transfection of the cell. These probes can be grouped into fluorophore-binding aptamers and RNA-binding proteins fused to whole or split fluorescent proteins. In this review, we highlight recent developments in the field of genetically encoded probes for RNA imaging and discuss the strengths and limitations of the different approaches., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Ribonucleoprotein (RNP) complexes are widespread in nature and play crucial roles in gene regulation, RNA processing, and translation. Novel technologies, such as CRISPR-mediated genome engineering, stress the potential of RNP complexes to carry out complex tasks in molecular biology. Here we report a bottom-up approach for the programmable self-assembly of RNP complexes. The building blocks for RNP complex formation are RNAs and Pumilio proteins that can bind to RNA sequence-specifically. Correct RNP assembly triggers protein complementation of a tripartite GFP, thereby resulting in up to 25-fold increased fluorescence, and is strictly dependent on the correct RNA sequences. Our results indicate that Pumilio and guide RNAs are suitable building blocks for the correct self-assembly of RNP complexes consisting of up to six different components. Self-assembling RNP complexes might prove useful for complex biotechnological applications in RNA sensing, imaging, or processing., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

More-efficient charge collection and suppressed trap recombination in colloidal quantum dot (CQD) solar cells is achieved by means of a bulk nano-heterojunction (BNH) structure, in which p-type and n-type materials are blended on the nanometer scale. The improved performance of the BNH devices, compared with that of bilayer devices, is displayed in higher photocurrents and higher open-circuit voltages (resulting from a trap passivation mechanism)., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A simple approach is demonstrated to combine a light trapping scheme and a conductive substrate for solution processed solar cells. By means of soft lithography, a new light-trapping architecture can be integrated as the bottom electrode for emerging thin-film solar-cell technologies without added costs, fully compatible with low-temperature processes, and yielding an enhancement in the photocurrent without altering the rest of the electrical performance of the device., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Short fuses: RNA can be detected sequence specifically by using two RNA binding proteins fused to short strands derived from GFP and an additional large GFP fragment. The tetramolecular system has a high signal-to-noise ratio, discriminates between closely related RNA, and works in RNA preparations as well as E. coli cell lysate., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Colloidal quantum dots have emerged as a material platform for low-cost high-performance optoelectronics. At the heart of optoelectronic devices lies the formation of a junction, which requires the intimate contact of n-type and p-type semiconductors. Doping in bulk semiconductors has been largely deployed for many decades, yet electronically active doping in quantum dots has remained a challenge and the demonstration of robust functional optoelectronic devices had thus far been elusive. Here we report an optoelectronic device, a quantum dot homojunction solar cell, based on heterovalent cation substitution. We used PbS quantum dots as a reference material, which is a p-type semiconductor, and we employed Bi-doping to transform it into an n-type semiconductor. We then combined the two layers into a homojunction device operating as a solar cell robustly under ambient air conditions with power conversion efficiency of 2.7%.

In many fields such as data mining, machine learning, pattern recognition and signal processing, data sets containing huge number of features are often involved. Feature selection is an essential data preprocessing technique for such high-dimensional data classification tasks. Traditional dimensionality reduction approach falls into two categories: Feature Extraction (FE) and Feature Selection (FS). Principal component analysis is an unsupervised linear FE method for projecting high-dimensional data into a low-dimensional space with minimum loss of information. It discovers the directions of maximal variances in the data. The Rough set approach to feature selection is used to discover the data dependencies and reduction in the number of attributes contained in a data set using the data alone, requiring no additional information. For selecting discriminative features from principal components, the Rough set theory can be applied jointly with PCA, which guarantees that the selected principal components will be the most adequate for classification. We call this method Rough PCA. The proposed method is successfully applied for choosing the principal features and then applying the Upper and Lower Approximations to find the reduced set of features from a gene expression data.

A new method has been achieved to form a Cu:benzoquinone derivative (DDQ) charge-transfer complex by the photoexcitation of [Cu(DDQ)2(CH 3COO)2] ( 1) that has been synthesized by the reaction of DDQ and hydrated cupric acetate in acetonitrile. Photoexcitation of coordinated complex 1 leads to the formation of charge-transfer complex Cu2+(DDQ(.-)2 ( 2). The charge transfer complex 2, when spun on solid substrates, forms nanowires. Sandwich structures of 2 exhibit electrical bistability associated with memory phenomenon. Read-only and random-access memory phenomena are evidenced in nanowires of 2 providing a route to attend the issues pertaining to the addressibility of organic memory devices.

Fluorescein sodium, which does not exhibit electrical bistability in thin films, can be switched to a high conducting state by the introduction of carbon nanotubes as channels for carrier transport. Thin films based on fluorescein sodium/carbon nanotubes display memory switching phenomenon among a low conducting state and several high conducting states. Read-only and random-access memory applications between the states resulted in multilevel memory in these systems. Results in thin films and in a monolayer (deposited via layer-by-layer assembly) show that instead of different molecular conformers, multilevel conducting states arise from the different density of high conducting fluorescein molecules.