Search

Andreas Zenthöfer,1 Judith Ehret,1 Melania Zajac,1 Samuel Kilian,2 Jana Kostunov,1 Peter Rammelsberg,1 Anna-Luisa Klotz1 1University of Heidelberg, Dental School, Department of Prosthodontics, Heidelberg, 69120, Germany; 2University of Heidelberg, Institute of Medical Biometry and Informatics, Heidelberg, 69120, GermanyCorrespondence: Anna-Luisa KlotzUniversity of Heidelberg, Dental School, Department of Prosthodontics, INF 400, Heidelberg, 69120, GermanyTel +49 6221 56-8799Fax +49 6221 56-5371Email anna-luisa.klotz@med.uni-heidelberg.deObjective: To evaluate how changes in oral health and chewing efficiency affect the changes in oral-health-related quality of life (OHRQoL) of nursing-home residents over six months.Methods: The study was conducted in nine nursing homes. Sociodemographic and general data were collected for all eligible individuals (n = 150). Of these, 114 participants (mean age 82.0 [± 9.5] years, 77.2% women) were available for the following tests at baseline and six months later: a comprehensive examination of dental and general health, a two-colour mixing-ability test (to assess chewing efficiency), the Geriatric Oral Health Assessment Index (GOHAI; to evaluate the OHRQoL), and the Mini Mental State Examination (MMSE; to diagnose the presence and severity of dementia). Univariate and multivariate linear regression models were compiled to analyse possible factors affecting OHRQoL.Results: For the final analysis, 108 participants were available. For the study cohort as a whole, a decrease in the number of functional occluding pairs (C: 0.195; p = 0.034) and an increase in dental-treatment needs (C: − 1.968; p = 0.056) had the greatest negative effects on OHRQoL as expressed by the GOHAI score. For denture wearers, a deterioration of denture condition (C: − 2.946; p = 0.003) was the most important predictor for a decline in OHRQoL.Conclusion: A short-term decline in oral health and function affects the OHRQoL of nursing-home residents. The most important dental variables in this regard are the number of functional occluding pairs and dental and denture-related treatment needs.Keywords: chewing-efficiency test, nursing home, OHRQoL, oral health

Andreas Zenthöfer,1 Judith Ehret,1 Melania Zajac,1 Samuel Kilian,2 Peter Rammelsberg,1 Anna-Luisa Klotz1 1University of Heidelberg, Dental School, Department of Prosthodontics, Heidelberg 69120, Germany; 2University of Heidelberg, Institute of Medical Biometry and Informatics, Heidelberg 69120, GermanyCorrespondence: Priv.-Doz. Dr. Anna-Luisa KlotzUniversity of Heidelberg, Dental School, Department of Prosthodontics, INF 400, Heidelberg 69120, GermanyTel + 49 6221 56 8799Fax +49 6221 56-5371Email anna-luisa.klotz@med.uni-heidelberg.deObjective: The aim of this study was to evaluate the effects of dental status and chewing efficiency on the oral-health-related quality of life (OHRQoL) of nursing-home residents.Materials and Methods: The study was conducted in nine nursing homes. All eligible participants were included, and general and medical data, information about nutritional status and their dental and prosthetic status were collected. Chewing efficiency was assessed by means of a two-colour mixing-ability test. The simple count version of the Geriatric Oral Health Assessment Index (SC-GOHAI) was used to evaluate participants’ OHRQoL, and the Mini-Mental State Examination to classify the presence of cognitive impairment. Univariate and multivariate regression models were used to analyse data.Results: The mean age of the participants was 82.1 (± 9.8) years and most participants suffered from at least very mild cognitive impairment. OHRQoL for all participants (n = 143) and denture wearers only (n = 105) was substantially associated with the type of prosthesis, the presence of natural teeth, the number of functional occluding pairs and dental and denture-related (if applicable) treatment needs. Furthermore, in both model’s univariate analysis showed that chewing efficiency also affected OHRQoL. In contrast, multivariate analysis of all participants revealed that only a higher number of functional occluding pairs (C: 0.250; p < 0.001), fewer dental treatment needs (C: − 1.733; p = 0.019) and a better nutritional status (C: − 1.298; p = 0.048) were relevant for better OHRQoL. For denture wearers, a higher number of functional occluding pairs (C: 0.192; p = 0.011), a better denture condition (C: − 2.194; p= 0.003) and a higher body mass index (BMI) (C: 0.145; p = 0.006) were the main variables associated with better OHRQoL among participants.Conclusion: Good oral health and oral function, including chewing efficiency, are associated with a high OHRQoL of nursing-home residents. However, few dental treatment needs, well-fitting dentures without treatment needs and a high number of functional occluding pairs seem to be the principal variables for an acceptable OHRQoL of nursing-home residents.Keywords: chewing efficiency, two-colour chewing-gum test, dental prostheses, OHRQoL, SC-GOHAI, BMI

Anna-Luisa Klotz,1 Melania Zajac,1 Judith Ehret,1 Samuel Kilian,2 Peter Rammelsberg,1 Andreas Zenthöfer1 1University of Heidelberg, Dental School, Department of Prosthetic Dentistry, Heidelberg 69120, Germany; 2University of Heidelberg, Institute of Medical Biometry and Informatics, Heidelberg 69120, GermanyCorrespondence: Anna-Luisa KlotzUniversity of Heidelberg, Im Neuenheimer Feld 400, Heidelberg 69120, GermanyTel +49 6221 566082Fax +49 6221 565371Email anna-luisa.klotz@med.uni-heidelberg.dePurpose: The purpose of this study was to identify how changes to general health might affect the oral health of nursing-home residents over a six-month period.Materials and Methods: The study was conducted in nine nursing homes in Germany. Sociodemographic and general data were collected at baseline and after six months. Complete baseline and follow-up data were available for 114 participants. The Clinical Dementia Rating (CDR) and the Global Deterioration Scale (GDS) were used to identify the presence and, if applicable, severity of dementia among participants. The Apraxia Screen of TULIA (AST) was used to identify motor impairment. A comprehensive dental examination of each participant was also performed. The examination included the documentation of dental and denture status and the number of decayed, missing and filled teeth (DMF-T). In addition, dental and denture hygiene were quantitatively assessed using the Plaque Index (PI) and the Denture Hygiene Index (DHI), respectively. Global dental treatment needs were evaluated by use of the Oral Health Assessment Tool (OHAT). Univariate and multivariate linear regression models were compiled to analyse possible factors affecting the dependent target variables.Results: During the study period, denture hygiene among the study population worsened by an average of 15%. The regression models detected that a more advanced age (in years) was associated with a less pronounced deterioration of denture hygiene as measured by use of the DHI (−0.806 per additional year of age; p = 0.030). Furthermore, an increase in the level of care needed (coefficient (C): −1.948; p = 0.002) and a more poorly graded assessment of general health compared with the value at baseline (C: 1.054; p = 0.026) were both associated with a deterioration of oral health as evaluated by use of the OHAT. In addition to these results, an increase in care needs was also associated with a deterioration of dental health as evaluated by use of the DMF-T (C: 0.966; p = 0.013).Conclusion: In the short term, a deterioration of general health, including an increase in care needs, seems to be the predominant factor associated with a more pronounced deterioration of oral health among nursing-home residents.Keywords: oral health, oral hygiene, caries, older people, nursing home

Anna-Luisa Klotz,1 Alexander Jochen Hassel,1 Johannes Schröder,2,3 Peter Rammelsberg,1 Andreas Zenthöfer1 1Department of Prosthodontics, Dental School, 2Institute of Gerontology, 3Section of Geriatric Psychiatry, University of Heidelberg, Heidelberg, Germany Purpose: The objective of this cross-sectional study was to evaluate the effect of prosthetic status on the oral health-related quality of life (OHRQoL) of nursing home residents with or without dementia.Methods: The study was performed in 14 nursing homes across the federal state of Baden-Württemberg, Germany. All eligible participants were included, and general and medical information and information about their dental and prosthetic statuses were collected. The Geriatric Oral Health Assessment Index (GOHAI) was administered to evaluate OHRQoL. The Mini-Mental State Examination (MMSE) served to classify participants into living or not living with dementia according to the established cutoff value for dementia (MMSE 0.05). The number of teeth (odds ratio [OR]: 2.0), the type of prosthetic status (OR: 6.5), and denture-related treatment needs (OR: 2.4) were the major factors significantly affecting OHRQoL (P

Andreas Zenthöfer,1 Inga Meyer-Kühling,2,3 Anna-Luisa Hufeland,1 Johannes Schröder,2,3 Tomas Cabrera,1 Dominik Baumgart,1 Peter Rammelsberg,1 Alexander J Hassel1 1Department of Prosthetic Dentistry, University of Heidelberg, 2Institute of Gerontology, University of Heidelberg, 3Section of Geriatric Psychiatry, Center of Psychiatry, University of Heidelberg, Heidelberg, Germany Aim: The aim of this study was to evaluate the effectiveness of carers’ education on improvements in oral health and denture hygiene of care-dependent and cognitively impaired older people in nursing homes compared to those without intervention. Methods: A total of 219 seniors living in 14 nursing homes in southwest Germany (intervention: n=144; control: n=75) were enrolled in this study. For each participant, Plaque Control Record (PCR), Gingival Bleeding Index (GBI), Denture Hygiene Index (DHI) and Community Periodontal Index of Treatment Needs (CPITN) were assessed at baseline and six months following the interventions. In addition, demographic parameters such as age, sex, chronic diseases, permanent medications, level of dependency and cognitive state were recorded. In the intervention homes, education for caregivers was provided and ultrasound baths for denture cleaning were implemented. Changes in the dental target variables PCR, GBI, CPITN and DHI during the six-month study period were compared between subjects in the intervention and the control groups as well as between subjects with and without dementia. Additionally, multivariate models were compiled for each dental index to evaluate possible confounders. Results: In the intervention group, PCR and DHI significantly improved during the study period (P0.05). Conclusion: Carers’ education improves oral health of people in nursing homes over a clinically relevant period of time. Implementation of ultrasound baths is a simple and effective measure to improve denture hygiene of both institutionalized elderly people and seniors with dementia and in severe need of care. From a clinical standpoint, it is noteworthy that the respective interventions can be easily implemented in everyday care routine. Keywords: oral health, intervention, older people, nursing home, longitudinal

Andreas Zenthöfer, Peter Rammelsberg, Tomas Cabrera, Alexander Jochen Hassel Department of Prosthodontics, Dental School, University of Heidelberg, Heidelberg, Germany Abstract: To determine relationships between the need for dental treatments of institutionalized elderly people and cognitive impairment and the general level of care needed. Two hundred and sixty-eight residents of long-term care facilities in Germany were included in this study. Age, sex, diseases, number of frequently taken drugs, and location of the long-term care facility of the participants were recorded. For each participant, the need for care was assessed by use of the Barthel index (BI). Cognitive impairment was evaluated by use of the mini-mental state examination (MMSE). To assess dental treatment needs, the revised oral assessment guide (ROAG) was applied for different oral health conditions, which were rated “healthy” or “treatment needed”. Spearman correlations were performed to evaluate associations between BI and MMSE and dental treatment needs. Statistical analysis revealed significant associations of BI (P

The efficacy of retainers is a pivotal concern in orthodontic care. This study examined the biomechanical behaviour of retainers, particularly the influence of retainer stiffness and tooth resilience on force transmission and stress distribution. To do this, a finite element model was created of the lower jaw from the left to the right canine with a retainer attached on the oral side. Three levels of tooth resilience and variable retainer bending stiffness (influenced by retainer type, retainer diameter, and retainer material) were simulated. Applying axial or oblique (45° tilt) loads on a central incisor, the force transmission increased from 2% to 65% with increasing tooth resilience and retainer stiffness. Additionally, a smaller retainer diameter reduced the uniformity of the stress distribution in the bonding interfaces, causing concentrated stress peaks within a small field of the bonding area. An increase in retainer stiffness and in tooth resilience as well as a more oblique load direction all lead to higher overall stress in the adhesive bonding area associated with a higher risk of retainer bonding failure. Therefore, it might be recommended to avoid the use of retainers that are excessively stiff, especially in cases with high tooth resilience.

Objectives: To evaluate the effect of different cement types on the incidence of failure and loss of retention of zirconia and metal‐ceramic single crowns (SCs) cemented on implant abutments. Methods: We placed 567 implant‐supported SCs in 358 patients and retrospectively evaluated long‐term retention for up to 12.8 years. The frameworks were made from metal alloy (n = 307) or zirconia (n = 260). SCs were cemented with permanent (glass‐ionomer cement; n = 376) or semipermanent cement (zinc oxide non‐eugenol cement; n = 191) on standardized (n = 446) or customized (n = 121) abutments. Kaplan–Meier curves were used to calculate the incidence of decementation. Differences between survival curves were assessed with log‐rank tests. Cox‐regression analysis was performed to evaluate multiple risk factors. Results: Of the 567 SCs, 22 failed because of technical complications and four because of implant loss. Loss of retention was observed in 50 SCs. Analysis revealed a 7% probability of loss of retention for zirconia and 16% for metal‐ceramic SCs after 10 years (p =.011). After 5 years, loss of retention was higher for standardized abutments than for customized abutments (p =.014). The probability of loss of retention was higher with semipermanent than with permanent cement (p =.001). Cox‐regression analysis revealed semipermanent cement as the only significant risk factor for SC failure (p =.026). Conclusions: In contrast to semipermanent cement, permanent cement provides acceptable long‐term retention of cemented implant‐supported SCs. These possible positive effects of customized abutments have to be controlled with larger sample sizes. [ABSTRACT FROM AUTHOR]

Completely veneered zirconia ceramic (ZC) fixed partial dentures (FPDs) have been reported to have a higher incidence of ceramic chipping than the standard metal-ceramic FPDs. However, data from comparative long-term studies are sparse. The purpose of this retrospective study was to compare the long-term survival, chipping-free survival, and success of ceramic-veneered high noble metal alloy (HN), base metal alloy (cobalt-chromium alloy) (CC), and ZC FPDs and to isolate risk factors for the incidence of failure, veneer chipping, and overall complications. Data from 289 study participants (58.7% women; mean age, 57.97 ±11.51 years) provided with a total of 400 FPDs comprising 197 (49.3%) HN FPDs, 121 (30.3%) CC FPDs, and 82 (20.5%) ZC FPDs fabricated from presintered 3 mol% yttria-stabilized zirconia (mean time of service, 6.85 ±3.25 years) were evaluated. Of these, 278 (69.5%) FPDs were provided by dentists and 122 (30.5%) by dental students. Five- and 10-year survival, chipping-free survival, and success rates were calculated using the Kaplan–Meier method and compared with the log-rank test. Risk factors were assessed using Cox regression analysis. The study was exploratory, so all P values were considered exploratory and descriptive. The 5- and 10-year survival rates were 94.7% and 77.8% for HN, 93.7% and 81.2% for CC, and 92.9% and 53.3% for ZC FPDs, respectively, indicating no clear difference in survival among the framework materials. The 5- and 10-year chipping-free rates were 94.1% and 82.8% for HN, 96.1% and 78.9% for CC, and 82.6% and 62.2% for ZC FPDs, respectively, indicating a difference between HN and ZC, and CC and ZC restorations. The 5- and 10-year success rates were 83.7% and 55.3% for HN, 86.5% and 51.4% for CC, and 68.9% and 30.2% for ZC FPDs, respectively, indicating a difference between HN and ZC, and CC and ZC restorations. The Cox regression model indicated framework material as an influencing risk factor for success, and this influence persisted when chipping was investigated. Compared with zirconia, the use of a metal alloy reduced the risk of chipping or the occurrence of complications by up to one-third. All FPDs showed high 5-year survival rates and acceptable 10-year survival rates with no strong differences among the materials. Higher success and chipping-free rates were observed for both HN and CC restorations compared with ZC restorations. Metal frameworks had a lower risk for complications or veneer chipping than zirconia frameworks. [ABSTRACT FROM AUTHOR]

Scan path length and the presence of edentulous alveolar ridge sections have a negative influence on scanning accuracy. How different artificial landmarks combined with an adapted scanning method affect accuracy is unclear. The purpose of this in vitro study was to determine the influence of 2 different artificial landmarks combined with an adapted scanning method on the scanning accuracy of a partially edentulous maxillary model. The model simulated a maxilla with 6 prepared teeth to accommodate a complete arch fixed partial denture. Five ceramic precision balls (ball center P 1 –P 5), distributed buccally to the dental arch, were used to detect the dimensional and angular changes between the reference model and the intraoral scans. One intraoral scanner (Primescan) was used to make 30 scans each with either the scanning strategy recommended by the manufacturer (M) or with an adapted scanning strategy and the use of a bar (B) or 4 plates (P) as artificial landmarks in the dorsal palate. Data were statistically analyzed using a generalized least squares regression model (α=.05). Scanning with artificial landmarks reduced the maximum absolute distance deviations (M: 249 μm, B: 190 μm, P: 238 μm) and the maximum angle deviations (M: 0.31 degrees, B: 0.28 degrees, P: 0.26 degrees). Vertical distance deviations were improved by 10 to 50% with the use of artificial landmarks. Absolute mean distance deviations were significantly lower for group M (P <.001). In contrast, with artificial landmarks, mean angle (P <.001) and mean vertical distance deviations (P <.014) improved significantly. Scanning with artificial landmarks in the dorsal palate combined with an adapted scanning method improved the scanning accuracy and reliability of vertical distance deviations. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate fit and retention of cobalt–chromium removable partial denture (RPD) frameworks fabricated with selective laser melting (SLM). Methods: Three types of framework for clasp-retained RPDs were virtually designed and fabricated using SLM (n = 30). For comparison, 30 additional frameworks were produced using conventional lost-wax casting. A biomechanical model was created, incorporating extracted teeth mounted on flexible metal posts. Using this model, horizontal constraint forces resulting from a misfit were measured using strain gauges, while vertical forces were not recorded. The constraint force components and resultant forces were determined for all abutment teeth, and the maximum retention force during RPD removal from the model was also assessed. For statistical evaluation, the two fabrication methods were analyzed by calculating the means and standard deviations. Results: The average horizontal constraint forces showed similar values for both fabrication methods (SLM: 3.5 ± 1.0 N, casting: 3.4 ± 1.6 N). The overall scatter of data for cast RPDs was greater compared to those fabricated using SLM, indicating a better reproducibility of the SLM process. With regard to retention, the intended retention force of 5–10 N per abutment tooth was not attained in one of the cast groups, while it was consistently achieved in all SLM groups. Conclusions: This in vitro study found that SLM is a promising option for the manufacture of cobalt–chromium RPD frameworks in terms of fit and retention.

Abstract Background To assess changes in apical bone height/bone gain over up to 8 years after implant placement combined with simultaneous internal sinus-floor elevation (ISFE) without use of graft. Methods 217 implants were placed in combination with graft-free ISFE and successfully healed in the posterior maxilla of 138 patients. Radiographs after surgery across an evaluation time of up to 8 years were analyzed. Changes in apical and marginal bone height related to the implants were measured. Differences in bone height over the study period were evaluated by use of Wilcoxon tests. To identify possible influencing factors on apical bone gain and marginal bone loss, backward linear regression variable selections and linear mixed regression models were performed. Results At the apical aspects of the implants, significant mean vertical bone gain of 2.4 mm (mesial) and 2.6 mm (distal) was observed after 6 months (p

Abstract Background To evaluate early failure and possible risk factors for failure of dental implants placed under practice-based conditions. Methods To clarify the research question, anonymized data from 106 patients with 186 dental implants were analyzed. The presence of sucessful healing (yes/no) at the time of incorporation of the final prosthesis was assessed. Mixed models were compiled for each target variable to enable estimation of the effects of patient-related and implant-related conditions on the risk of early implant failure. Results Nine out of 186 implants (4.8%) placed in 106 participants failed before incorporation of the final prosthesis. The use of shorter implants (

The accuracy of fit of fixed partial dentures is directly dependent on the accuracy of a digital scan. However, the influence of scan-path length on scanning accuracy is unclear. The purpose of this in vitro study was to evaluate how scan-path length influenced the scanning accuracy of a completely dentate or partially edentulous maxilla captured by 3 intraoral scanners: Omnicam AC (OC), TRIOS 4 (TR), and Primescan (PS). Each intraoral scanner was used to make 30 scans each of the 2 clinical scenarios (completely dentate and partially edentulous) simulated with a reference model. The partially edentulous model simulated a maxilla with 6 prepared teeth to support a complete arch fixed partial denture. The missing teeth were then added to create a completely dentate model. The prepared teeth were later used to determine distance, angular, and tooth-axis deviations between the reference model (digitized with high precision before the tests) and the intraoral scans. Data were statistically analyzed by using a linear model or, if not applicable, a type II ANOVA (α=.05). Distance deviations increased linearly as the scan-path length increased. In contrast, angular and tooth-axis deviations did not increase linearly. All types of deviation differed depending on the scanning system used. Regarding the 90% quantile values, total distance deviations related to scan-path length amounted to 1.31 μm/mm (OC), 1.00 μm/mm (PS), and 1.45 μm/mm (TR) for the completely dentate maxilla and 1.10 μm/mm (OC), 1.46 μm/mm (PS), and 1.40 μm/mm (TR) for the partially edentulous maxilla. Distance deviations became larger as the scan-path length increased. [ABSTRACT FROM AUTHOR]