Search

Exploiting ambipolar electrical conductivity based on graphene field-effect transistors has raised enormous interest for high-frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V-shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities specially in the HF domain. We present, here, new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene-based transistors., Comment: 31 pages, 7 figures

The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future.

With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system which is exposed to many fake hits from the gamma background. A tracking system using RPCs is implemented to clean the fake hits, taking profit of the high muon efficiency of these chambers. This work will present the tracking system configuration, used detector analysis algorithm and results., Comment: 12 pages, 9 figures. Contribution to XVI Workshop on Resistive Plate Chambers and Related Detectors (RPC2022), September 26-30 2022. Submitted to Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

This work presents a small-signal high-frequency (HF) equivalent circuit (EC) to model AC performances of black-phosphorous field-effect transistors (BPFETs). The proposed EC is able to describe correctly both the experimental HF intrinsic and extrinsic figures of merit, as well as S-parameters, from different BPFET technologies. Single- and double-stage radio frequency gain amplifiers, are designed at 2.4 GHz using the experimentally-calibrated small-signal BPFET EC. Results show high-gain high-selective BPFET-based amplifiers.

An experimentally-calibrated carbon nanotube compact transistor model has been used here to design two high-frequency (HF) circuits with two different functionalities each: a phase configurable amplifier (PCA) and a frequency configurable amplifier (FCA). The former design involves an in-phase amplifier and an inverting amplifier while the latter design embraces a frequency doubler as well as a distinct inverting amplifier. The specific functionality selection of each of the two HF circuit designs is enabled mainly by the inherent ambipolar feature at a device level. Furthermore, at a circuit level the matching networks are the same regardless the operation mode. In-phase and inverting amplification are enabled in the PCA by switching the gate-to-source voltage (VGS) from -0.3 V to 0.9 V while the drain-to-source voltage (VDS) remains at 3 V. By designing carefully the matching and stability networks, power gains of 4.5 dB and 6.7 dB at 2.4 GHz for the in-phase and inverting operation mode have been achieved, respectively. The FCA, in its frequency doubler operation mode, exhibits 20 dBc of fundamental-harmonic suppression at 2.4 GHz when an input signal at 1.2 GHz is considered. This frequency doubler functionality is enabled at VGS=0.3 V, whereas at VGS=0.9 V amplification of 4.5 dB is obtained while VDS remains at 3 V in both cases. In both configurable circuits the stabilization and matching networks are the same regardless the bias-chosen operation mode. The circuits performance degradation due to metallic tubes in the device channel is studied as well as the impact of non-ideal inductors in each design. PCA and FCA operation modes are further exploited in high-frequency modulators.

The use of carbon nanotube (CNT) field-effect transistors (FETs) in microwave circuit design requires an appropriate, immediate and efficient description of their performance. This work describes a technique to extract the parameters of an electrical equivalent circuit for CNTFETs. The equivalent circuit is used to model the dynamic and noise performance at low- and high-frequency of different CNTFET technologies, considering extrinsic and intrinsic device parameters as well as the contact resistance. The estimation of the contact resistance at the metal/CNTs interfaces is obtained from a Y-function based extraction method. The noise model includes four noise sources: thermal noise, thermal channel noise, shot channel noise and flicker noise. The proposed model is compared with a compact model calibrated to hysteresis-free experimental data from a high-frequency multi-tube (MT)-CNTFET technology. Additionally, it has been applied to experimental data from another fabricated MT-CNTFET technology. The comparison in both cases shows a good agreement between reference data (simulation and experimental) and results from the proposed model. Low- and high-frequency noise projections of the fabricated reference device are further studied. Noise results from both studied technologies show that shot noise mainly contributes to the total noise due to the presence of Schottky barriers at contacts and along the channel.

In this work, an evaluation of the contact quality of black phosphorus (BP) field-effect transistors (FETs) from different technologies previously reported is performed by means of an efficient and reliable contact resistance extraction methodology based on individual device practical characteristics. A good agreement is achieved between the extracted values with the Y-function method used here and reference values obtained with other methods considering internal values as well as with more expensive methods involving fabricated test structures. The method enables a direct evaluation of different steps in the same technology and it embraces the temperature dependence of the contact characteristics. Channel phenomena have no impact on the extracted contact resistance values. High-frequency performance projections are obtained for fabricated devices based on the extracted contact resistance.

A small-signal equivalent circuit for graphene field-effect transistors is proposed considering the explicit contribution of effects at the metal-graphene interfaces by means of contact resistances. A methodology to separate the contact resistances from intrinsic parameters, obtained by a de-embedding process, and extrinsic parameters of the circuit is considered. The experimental high-frequency performance of three devices from two different GFET technologies is properly described by the proposed small-signal circuit. Some model parameters scale with the device footprint. The correct detachment of contact resistances from the internal transistor enables to assess their impact on the intrinsic cutoff frequency of the studied devices.