Search

Single-spin asymmetries observed in polarised deep-inelastic scattering are important probes of hadron structure. The Sivers asymmetry has been the focus of much attention in QCD phenomenology and is yet to be understood at the quark level. In this Letter, we present a lattice QCD calculation of the spatial distribution of a colour-Lorentz force acting on the struck quark in a proton. We determine a spin-independent confining force, as well as spin-dependent force distributions with local forces on the order of 3 GeV/fm. These distributions offer a complementary picture of the Sivers asymmetry in transversely polarised deep-inelastic scattering., Comment: 16 pages, 16 figures

Colloidal semiconductor nanocrystals are promising materials for classical and quantum light sources due to their versatile chemistry and efficient photoluminescence (PL) properties. While visible emitters are well-established, the pursuit of excellent (near-)infrared sources continues. One notable candidate in this regard are photoluminescent two-dimensional (2D) PbS nanoplatelets (NPLs) exhibiting excitonic emission at 720 nm (1.7 eV) directly tying to the typical emission range limit of CdSe NPLs. Here, we present the first comprehensive analysis of low-temperature PL from this material class. Ultrathin 2D PbS NPLs exhibit high crystallinity confirmed by scanning transmission electron microscopy, and revealing Moire patterns in overlapping structures. At 4K, we observe unique PL features in single PbS NPLs, including narrow zero-phonon lines with line widths down to 0.6 meV and a linear degree of polarization up to 90%. Time-resolved measurements identify trions as the dominant emission source with a 2.3 ns decay time. Sub-meV spectral diffusion and no immanent blinking over minutes is observed, as well as discrete spectral jumps without memory effects. These findings advance the understanding and underpin the potential of colloidal PbS NPLs for optical and quantum technologies.

We present a determination of the structure functions of the off-forward Compton amplitude $\mathcal{H}_1$ and $\mathcal{E}_1$ from the Feynman-Hellmann method in lattice QCD. At leading twist, these structure functions give access to the generalised parton distributions (GPDs) $H$ and $E$, respectively. This calculation is performed for an unphysical pion mass of $m_{\pi}=412\;\text{MeV}$ and four values of the soft momentum transfer, $t\approx 0, -0.3, -0.6, -1.1\;\text{GeV}^2$, all at a hard momentum scale of $\bar{Q}^2\approx 5\;\text{GeV}^2$. Using these results, we test various methods to determine properties of the real-time scattering amplitudes and GPDs: (1) we fit their Mellin moments, and (2) we use a simple GPD ansatz to reconstruct the entire distribution. Our final results show promising agreement with phenomenology and other lattice results, and highlight specific systematics in need of control., Comment: 20 pages, 14 figures. Minor updates to text. Version to appear in Phys. Rev. D

The dominant contribution to the theoretical uncertainty in the extracted weak parameters of the Standard Model comes from the hadronic uncertainties in the electroweak boxes, i.e. $\gamma-W^\pm/Z$ exchange diagrams. A dispersive analysis relates the box diagrams to the parity-odd structure function, $F_3$, for which the experimental data either do not exist or belong to a separate isospin channel. Therefore a first-principles calculation of $F_3$ is highly desirable. In this contribution, we report on the QCDSF/UKQCD Collaboration's progress in calculating the moments of the $F_3^{\gamma Z}$ structure function from the forward Compton amplitude at the SU(3) symmetric point., Comment: 9 pages, 3 figures. Contribution to the 40th International Symposium on Lattice Field Theory (Lattice 2023) July 31st - August 4th, 2023, Fermi National Accelerator Laboratory, Batavia IL, USA

Constantly informing systems (CIS), that is technical systems that provide us with information over a long period of time, face the challenge of providing us with helpful information. The information base of a human model changes over time but also his mood and his ability to accept information. An information provision strategy should hence take such aspects into account. In this paper, we describe our vision of an approach to aid the design of CIS. We envision using psychological models of the human mind and emotions in an information provision game. Its analysis gives comparative insights into design variants., Comment: In Proceedings FMAS 2023, arXiv:2311.08987

We are in the process of building complex highly autonomous systems that have build-in beliefs, perceive their environment and exchange information. These systems construct their respective world view and based on it they plan their future manoeuvres, i.e., they choose their actions in order to establish their goals based on their prediction of the possible futures. Usually these systems face an overwhelming flood of information provided by a variety of sources where by far not everything is relevant. The goal of our work is to develop a formal approach to determine what is relevant for a safety critical autonomous system at its current mission, i.e., what information suffices to build an appropriate world view to accomplish its mission goals., Comment: arXiv admin note: text overlap with arXiv:2209.14038

The structure of hadrons relevant for deep-inelastic scattering are completely characterised by the Compton amplitude. A direct calculation of the Compton amplitude in a lattice QCD setup provides a way to accessing the structure functions, circumventing the operator mixing and renormalisation issues of the standard operator product expansion approach. In this contribution, we focus on the QCDSF/UKQCD Collaboration's advances in calculating the forward Compton amplitude via an implementation of the second-order Feynman-Hellmann theorem. We highlight our progress in investigating the moments of nucleon structure functions., Comment: Presented at DIS2023: XXX International Workshop on Deep-Inelastic Scattering and Related Subjects, Michigan State University, USA, 27-31 March 2023. arXiv admin note: substantial text overlap with arXiv:2212.09197, arXiv:2110.01310

The Feynman--Hellmann approach to computing matrix elements in lattice QCD by first adding a perturbing operator to the action is described using the transition matrix and the Dyson expansion formalism. This perturbs the energies in the two-point baryon correlation function, from which the matrix element can be obtained. In particular at leading order in the perturbation we need to diagonalise a matrix of near-degenerate energies. While the method is general for all hadrons, we apply it here to a study of a Sigma to Nucleon baryon transition vector matrix element., Comment: 50 pages. Minor typos fixed. Published version

With increasing requirements for greater precision, it becomes essential to describe the effects of isospin breaking induced by both quark masses and electro-magnetic effects. In this work we perform a lattice analysis of the weak decay constants of the neutral pseudoscalar mesons including such isospin breaking effects, with particular consideration being given to the state mixing of the $\pi^0$, $\eta$ and $\eta^\prime$. We also detail extensions to the non-perturbative RI$^\prime$-MOM renormalization scheme for application to non-degenerate flavour-neutral operators which are permitted to mix, and present initial results. Using flavour-breaking expansions in terms of quark masses and charges we determine the leptonic decay constants for the $\pi^0$ and $\eta$ mesons, demonstrating in principle how precision determinations of all neutral pseudoscalar decay constants could be reached in lattice QCD with QED and strong isospin-breaking accounted for., Comment: 10 pages, 5 figures, analysis of charged mesons has been removed

At the TeV scale, low-energy precision observations of neutron characteristics provide unique probes of novel physics. Precision studies of neutron decay observables are susceptible to beyond the Standard Model (BSM) tensor and scalar interactions, while the neutron electric dipole moment, $d_n$, also has high sensitivity to new BSM CP-violating interactions. To fully utilise the potential of future experimental neutron physics programs, matrix elements of appropriate low-energy effective operators within neutron states must be precisely calculated. We present results from the QCDSF/UKQCD/CSSM collaboration for the isovector charges $g_T,~g_A$ and $g_S$ of the nucleon, $\Sigma$ and $\Xi$ baryons using lattice QCD methods and the Feynman-Hellmann theorem. We use a flavour symmetry breaking method to systematically approach the physical quark mass using ensembles that span five lattice spacings and multiple volumes. We extend this existing flavour breaking expansion to also account for lattice spacing and finite volume effects in order to quantify all systematic uncertainties. Our final estimates of the nucleon isovector charges are $g_T~=~1.010(21)_{\text{stat}}(12)_{\text{sys}},~g_A=1.253(63)_{\text{stat}}(41)_{\text{sys}}$ and $g_S~=~1.08(21)_{\text{stat}}(03)_{\text{sys}}$ renormalised, where appropriate, at $\mu=2~\text{GeV}$ in the $\overline{\text{MS}}$ scheme., Comment: 19 pages, 11 figures, 10 tables

The standard method for determining matrix elements in lattice QCD requires the computation of three-point correlation functions. This has the disadvantage of requiring two large time separations: one between the hadron source and operator and the other from the operator to the hadron sink. Here we consider an alternative formalism, based on the Dyson expansion leading to the Feynman-Hellmann theorem, which only requires the computation of two-point correlation functions. Both the cases of degenerate energy levels and quasi-degenerate energy levels which correspond to diagonal and transition matrix elements respectively can be considered in this formalism. As an example numerical results for the Sigma to Nucleon vector transition matrix element are presented., Comment: Proceedings of the 39th International Symposium on Lattice Field Theory, 8-13 August 2022, Bonn, Germany

A highly autonomous system (HAS) has to assess the situation it is in and derive beliefs, based on which, it decides what to do next. The beliefs are not solely based on the observations the HAS has made so far, but also on general insights about the world, in which the HAS operates. These insights have either been built in the HAS during design or are provided by trusted sources during its mission. Although its beliefs may be imprecise and might bear flaws, the HAS will have to extrapolate the possible futures in order to evaluate the consequences of its actions and then take its decisions autonomously. In this paper, we formalize an autonomous decisive system as a system that always chooses actions that it currently believes are the best. We show that it can be checked whether an autonomous decisive system can be built given an application domain, the dynamically changing knowledge base and a list of LTL mission goals. We moreover can synthesize a belief formation for an autonomous decisive system. For the formal characterization, we use a doxastic framework for safety-critical HASs where the belief formation supports the HAS's extrapolation., Comment: In Proceedings FMAS2022 ASYDE2022, arXiv:2209.13181

We present a simultaneous extraction of the moments of $F_2$ and $F_L$ structure functions of the proton for a range of photon virtuality, $Q^2$. This is achieved by computing the forward Compton amplitude on the lattice utilizing the second-order Feynman-Hellmann theorem. Our calculations are performed on configurations with two different lattice spacings and volumes, all at the $SU(3)$ symmetric point. We find the moments of $F_{2}$ and $F_{L}$ in good agreement with experiment. Power corrections turn out to be significant. This is the first time the $Q^2$ dependence of the lowest moment of $F_2$ has been quantified., Comment: 14 pages, 11 figures, 2 tables. Version to appear in PRD

Theoretical predictions of the proton--neutron mass difference and measurements of the proton's charge radius require inputs from the Compton amplitude subtraction function. Model-dependent and non-relativistic calculations of this subtraction function vary significantly, and hence it contributes sizeable uncertainties to the aforementioned physical quantities. We report on the use of Feynman-Hellmann methods in lattice QCD to calculate the subtraction function from first principles. In particular, our initial results show anomalous high-energy behaviour that is at odds with the prediction from the operator product expansion (OPE). Therefore, we investigate the possibility that this unexpected behaviour is due to lattice artifacts, by varying the lattice spacing and volume, and comparing different discretisations of the vector current. Finally, we explore a Feynman-Hellmann implementation that is less sensitive to short-distance contributions and show that the subtraction function's anomalous behaviour can be attributed to these short-distance contributions. As such, this work represents the first steps in achieving a complete understanding of the Compton amplitude subtraction function., Comment: 13 pages, 6 figures. Contribution to the 38th International Symposium on Lattice Field Theory, LATTICE2021 26th-30th July, 2021 Zoom/Gather@Massachusetts Institute of Technology

Wang-Landau simulations offer the possibility to integrate explicitly over a collective coordinate and stochastically over the remainder of configuration space. We propose to choose the so-called "slow mode", which is responsible for large autocorrelation times and thus critical slowing down, for collective integration. We study this proposal for the Ising model and the linear-log-relaxation (LLR) method as simulation algorithm. We firstly demonstrate super critical slowing down in a phase with spontaneously broken symmetry and for the heatbath algorithms, for which autocorrelation times grow exponentially with system size. By contrast, using the magnetisation as collective coordinate, we present evidence that super critical slowing down is absent. We still observe a polynomial increase of the autocorrelation time with volume (critical slowing down), which is however reduced by orders of magnitude when compared to local update techniques., Comment: Author accepted version for publication in Physical Review E, 15 pages, 15 figures

We compute the renormalisation factors of the quark mass and wave function using IMOM (Interpolating MOMenta) schemes. The framework is the Rome-Southampton non-renormalisation method, but the momentum transfer in the quark bilinears is not restricted to zero or to the symmetric point. We study the scale dependence, infrared contamination and lattice artefacts for different values of this momentum transfer and for two different kinds of projectors. For the numerical simulations, we use data generated by the RBC-UKQCD collaborations, with $N_f = 2+1$ flavours of Domain-Wall fermions, and inverse lattice spacing of $1.79 $ and $2.38$ GeV., Comment: Talk presented at the 38th International Symposium on Lattice Field Theory, LATTICE2021 26th-30th July, 2021 Zoom/Gather@Massachusetts Institute of Technology

We report on the use of Feynman-Hellmann techniques to calculate the off-forward Compton amplitude (OFCA) in lattice QCD. At leading-twist, the Euclidean OFCA is parameterised by the Mellin moments of generalised parton distributions (GPDs). Hence we extract GPD moments for two values of the soft momentum transfer, $t=-1.10, -2.20\;\text{GeV}^2$ and zero-skewness kinematics at an unphysical pion mass of $m_{\pi}\approx 470\;\text{MeV}$. This includes the first determination of the $n=4$ moments., Comment: 9 pages, 3 figures

Lattice QCD calculations of the nucleon electromagnetic form factors are of interest at both the high and low momentum transfer regions. For high momentum transfers especially there are open questions which require more intense study, such as the potential zero crossing in the proton's electric form factor. We will present recent progress from the QCDSF/UKQCD/CSSM collaboration on the calculation of these form factors using the Feynman-Hellmann method in lattice QCD. The Feynman-Hellmann method allows for greater control over excited states which we take advantage of by going to high values of the momentum transfer. In this proceeding we present results of the form factors up to $6 \textrm{GeV}^{2}$, using $N_{f}=2+1$ flavour fermions for three different pion masses in the range 310-470 $\textrm{MeV}$. The results are extrapolated to the physical pion mass through the use of a flavour breaking expansion., Comment: 10 pages, 7 figures, proceeding for the 38th International Symposium on Lattice Field Theory (Lattice 2021), 26-30 Jul 2021, Zoom/Gather@MIT, USA

We present updates from QCDSF/UKQCD/CSSM on the $SU(3)_f$ breaking in $B$ meson decay constants. The $b$-quarks are generated with an anisotropic clover-improved action, and are tuned to match properties of the physical $B$ and $B^*$ mesons. Configurations are generated with $\overline{m}=(1/3)(2m_l+m_s)$ kept constant to control symmetry breaking effects. Various sources of systematic uncertainty will be discussed, including those from continuum extrapolations and extrapolations to the physical point. We also present new efforts to calculate $f_B$ and $f_{B_s}$ using weighted averages across multiple time fitting regions. The use of an automated weighted averaging technique over multiple fitting ranges allows for timely tuning of the $b$-quark and reduces the impact of systematic errors from fitting range biases in calculations of $f_B$ and $f_{B_s}$, Comment: 15 pages, 7 figures, proceedings for The 38th International Symposium on Lattice Field Theory, LATTICE2021, 26th-30th July, 2021, Zoom/Gather@Massachusetts Institute of Technology

A major objective of lattice QCD is the computation of hadronic matrix elements. The standard method is to use three-point and four-point correlation functions. An alternative approach, requiring only the computation of two-point correlation functions is to use the Feynman-Hellmann theorem. In this talk we develop this method up to second order in perturbation theory, in a context appropriate for lattice QCD. This encompasses the Compton Amplitude (which forms the basis for deep inelastic scattering) and hadron scattering. Some numerical results are presented showing results indicating what this approach might achieve., Comment: Proceedings contribution to the XXXIII International (Online) Workshop on High Energy Physics "Hard Problems of Hadron Physics: Non-Perturbative QCD & Related Quests", November 8-12, 2021

Hadronic matrix elements evaluated on the lattice can be converted to a continuum scheme such as $\MSbar$ using intermediate non-perturbative renormalisation schemes. Discretisation effects on the lattice and convergence of the continuum perturbation theory are both scheme dependent and we explore this dependence in the framework of the Rome-Southampton method for generalised kinematics. In particular, we implement several non-exceptional {\em interpolating} momentum schemes, where the momentum transfer is {\em not} restricted to the symmetric point defined in RI/SMOM. Using flavour non-singlet quark bilinears, we compute the renormalisation factors of the quark mass and wave function for $N_f=3$ flavours of dynamical quarks. We investigate the perturbative and non-perturbative scale-dependencies. Our numerical results are obtained from lattice simulations performed with Domain-Wall fermions, based on ensembles generated by RBC-UKQCD collaborations; we use two different lattice spacings $1/a \sim 1.79 $ and $2.38$ GeV. We also give the numerical values for the relevant anomalous dimensions and matching coefficients at next-to-next-to-leading order.

Lattice calculations of hadronic observables are aggravated by short-distance fluctuations. The gradient flow, which can be viewed as a particular realisation of the coarse-graining step of momentum space RG transformations, proves a powerful tool for evolving the lattice gauge field to successively longer length scales for any initial coupling. Already at small flow times we find the signal-to-noise ratio of two- and three-point functions significantly enhanced and the projection onto the ground state largely improved, while the effect on the hadronic observables considered here to be negligible. A further benefit is that far fewer conjugate gradient iterations are needed for the Wilson-Dirac inverter to converge. Additionally, we find the renormalisation constants of quark bilinears to be significantly closer to unity., Comment: 8 pages, 6 figures. Contribution to the 38th International Symposium on Lattice Field Theory, LATTICE2021 26th-30th July, 2021 Zoom/Gather@Massachusetts Institute of Technology

The nucleon tensor charge, $g_T$, is an important quantity in the search for beyond the Standard Model tensor interactions in neutron and nuclear $\beta$-decays as well as the contribution of the quark electric dipole moment (EDM) to the neutron EDM. We present results from the QCDSF/UKQCD/CSSM collaboration for the tensor charge, $g_T$, using lattice QCD methods and the Feynman-Hellmann theorem. We use a flavour symmetry breaking method to systematically approach the physical quark mass using ensembles that span three lattice spacings., Comment: 10 pages, 4 figures, proceeding for the 38th International Symposium on Lattice Field Theory (Lattice 2021), 26-30 Jul 2021, Zoom/Gather@MIT, USA

Using an SU(3)-flavour symmetry breaking expansion between the strange and light quark masses, we determine how this constrains the extrapolation of baryon octet matrix elements and form factors. In particular we can construct certain combinations, which fan out from the symmetric point (when all the quark masses are degenerate) to the point where the light and strange quarks take their physical values. As a further example we consider the vector amplitude at zero momentum transfer for flavour changing currents., Comment: 8 pages, proceedings for The 38th International Symposium on Lattice Field Theory, LATTICE2021, 26th-30th July, 2021, Zoom/Gather@Massachusetts Institute of Technology