Search

Estimation of accurate soil physical and hydraulic properties are of prime importance for the management of water resources in agriculture-dominant regions. This study introduces a simplified framework for estimating soil physical and hydraulic properties crucial for managing agricultural water resources. The developed framework optimizes soil properties for the Regional Hydrological Extremes Assessment System (RHEAS) to enhance the performance of its core hydrological model, Variable Infiltration Capacity (VIC). These soil properties were optimized using six years (2015–2021) of satellite soil moisture observations from NASA’s Soil Moisture Active Passive (SMAP) mission with a modified Shuffled Complex Evolution (SCE-UA) optimization algorithm. A total of three most sensitive soil properties that control model soil moisture simulations, such as Ksat (Saturated hydraulic conductivity), expt (exponent parameter in Campbell’s equation for hydraulic conductivity), and bd (Bulk density) were optimized for the Lower Mekong River (LMR) basin. To better assess the impact of optimized soil properties, streamflow simulation as well as agricultural drought severity assessment, were estimated using the RHEAS framework’s VIC Routing module and Soil Moisture Deficit Index (SMDI) module, respectively. The streamflow simulation involved four approaches: an initial open-loop setup, one optimized with SMAP soil moisture data (SMAP), another optimized with actual streamflow data (Runoff), and a final one combining the previous two datasets (SMAP_Runoff). Switching from the initial setup to the SMAP-optimized model increased the Nash-Sutcliffe Efficiency (NSE) by 56.4 % and upgrading from the streamflow-optimized to the combined data model raised the NSE by 21.9 %. This showcases the benefits of optimizing soil properties for more accurate simulations. Furthermore, the optimized model accurately represented the severity and extent of historical agricultural droughts, aligning with regional drought reports of LMR basin. This framework offers a valuable tool for hydrological modeling and drought management, particularly in data-scarce and agriculture-intensive regions, informing agricultural water resource management, irrigation decision-making, and food security initiatives within the LMR basin and beyond.

An analysis of a Level-2 (L2) soil moisture record extending from 1 May 2021 to 1 January 2024 derived from Spire, Inc.’s Global Navigation Satellite System Reflectometry (GNSS-R) observatories is presented. The product's sensitivity to large scale soil moisture variability is demonstrated using an example of a 2022 flood in Pakistan. Product consistency among the constellation's multiple satellites is also investigated; no clear evidence of intersatellite biases is observed. Further comparisons are performed with soil moisture datasets from the Soil Moisture Active Passive (SMAP) and Cyclone Global Navigation Satellite System (CYGNSS) missions, from the European Center for Medium-Range Weather Forecasts Reanalysis v5 (ERA5), and from in situ International Soil Moisture Network (ISMN) sites. Although an overall product correlation with SMAP soil moisture of approximately 85$\%$ is determined, per-pixel correlations vary significantly and per-pixel root-mean-square errors (RMSE) can range from 0.02 to 0.09 (cm$^{3}$/cm$^{3}$) depending on land class. The importance of applying the product's quality flags is also demonstrated. The influence of other calibration effects and inland water body contamination on these results is also discussed.

The NASA ISRO synthetic aperture radar (NISAR) mission scheduled for launch in 2024 will provide global L-band radar observations that can be applied to estimate land surface soil moisture. The mission's soil moisture product will be provided at 200-m resolution with a global revisit frequency of 12 days (or 6 days when considering both ascending and descending observations). A time-series ratio algorithm for soil moisture retrieval has been applied to NISAR simulated datasets from airborne UAVSAR measurements in the SMAPVEX12 field campaign. Soil moisture retrieval performance using the algorithm is encouraging, with a correlation coefficient between retrievals and in situ observations greater than 0.7 and an unbiased root-mean-squared Error (RMSE) of 0.05 ${{{\bm{m}}}^3}/{{{\bm{m}}}^3}$. The results suggest that the time-series ratio algorithm will provide soil moisture products that meet an accuracy goal of 0.06 ${{{\bm{m}}}^3}/{{{\bm{m}}}^3}$ unbiased RMSE.

To address the recent increase in wildfire severity and incidence, as well as the subsequent financial and physical costs, forest managers and wildland firefighting agencies rely on remotely sensed products for better decision-making and mitigation efforts. To address the remote sensing needs of these agencies, which include high spatial resolution, immunity to atmospheric and solar illumination effects, and day/night capabilities, the use of synthetic aperture radar (SAR) is under investigation for application in current and upcoming systems for all phases of a wildfire. Focusing on the active phase, a method for monitoring wildfire activity is presented based on changes in the radar vegetation index (RVI). L-band backscatter measurements from NASA/JPL’s UAVSAR instrument are used to obtain RVI images on multiple dates during the 2020 Bobcat (located in Southern CA, USA) and Hennessey (located in Northern CA, USA) fires and the 2021 Caldor (located in the Sierra Nevada region of CA, USA) fire. Changes in the RVI between measurement dates of a single fire are then compared to indicators of fire activity such as ancillary GIS-based burn extent perimeters and the Landsat 8-based difference normalized burn ratio (dNBR). An RVI-based wildfire “burn” detector/index is then developed by thresholding the RVI change. A combination of the receiver operating characteristic (ROC) curves and F1 scores for this detector are used to derive change detection thresholds at varying spatial resolutions. Six repeat-track UAVSAR lines over the 2020 fires are used to determine appropriate threshold values, and the performance is subsequently investigated for the 2021 Caldor fire. The results show good performance for the Bobcat and Hennessey fires at 100 m resolution, with optimum probability of detections of 67.89% and 71.98%, F1 scores of 0.6865 and 0.7309, and Matthews correlation coefficients of 0.5863 and 0.6207, respectively, with an overall increase in performance for all metrics as spatial resolution becomes coarser. The results for pixels identified as “burned” compare well with other fire indicators such as soil burn severity, known progression maps, and post-fire agency publications. Good performance is also observed for the Caldor fire where the percentage of pixels identified as burned within the known fire perimeters ranges from 37.87% at ~5 m resolution to 88.02% at 500 m resolution, with a general increase in performance as spatial resolution increases. All detections for Caldor show dense collections of burned pixels within the known perimeters, while pixels identified as burned that lie outside of the know perimeters have a sparse spatial distribution similar to noise that decreases as spatial resolution is degraded. The Caldor results also align well with other fire indicators such as soil burn severity and vegetation disturbance.

Fractional water (FW) correction of satellite microwave brightness temperature (Tb) observations is a prerequisite for accurate soil moisture (SM) mapping over mixed land and water areas. Here, we evaluated the FW impacts on NASA Soil Moisture Active Passive (SMAP) L-band (1.4 GHz) SM retrievals using two water masks including (a) the NASA Terra Moderate Resolution Imaging Spectroradiometer (MODIS) Land Water Mask version 6 (MOD44W) multi-year (2015–2019) water record and (b) the Ocean Discipline Processing System (ODPS) water mask previously used for SMAP global operational Tb and SM processing. The MOD44W and ODPS data were first compared with the European Commission's Joint Research Centre (JRC) Landsat-based water record. MOD44W showed major improvements in land/water classifications relative to the ODPS, with producer accuracy increasing from 50.02% to 95.02%, and user accuracy from 53.93% to 91.73% for water pixels. For assessing the FW impacts on SM retrievals, the same single channel V-polarization (SCA-V) algorithm was applied to SMAP Tb datasets corrected using ODPS and MOD44W water masks separately. MOD44W showed overall greater FW values (mean increase of 0.006) relative to the ODPS, leading to relatively drier SM retrievals (mean decrease: −0.012 m3/m3). Additional comparisons with globally distributed SM measurements confirmed consistently lower SM retrieval biases (mean decrease 0.04 m3/m3) and higher correlations (mean increase 0.06) of the MOD44W-based results relative to those based on the ODPS. Our results revealed non-negligible SM retrieval uncertainty introduced from the underlying ancillary FW data for areas with substantial water presence (e.g. FW>0.01).

Liu et al. used the NASA GRACE/FO missions to show that since 2019, groundwater depletion in California’s Central Valley has accelerated by 31% compared to recent droughts, and has increased by a nearly a factor of 5 compared to the 60-year average.

A thermal hydraulic disaggregation of soil moisture (THySM) algorithm was implemented to downscale NASA's soil moisture active passive (SMAP) enhanced soil moisture (SM) product to 1 km over the continental United States (CONUS). This algorithm was developed by combining thermal inertia theory with a soil hydraulic-based approach that considers fine-scale SM spatial distribution driven by both heat fluxes and hydraulic conductivity in soils. Relative soil wetness values were estimated using land surface temperature and normalized difference vegetation index for the thermal inertia model and using soil properties for the hydraulic model. The relative soil wetness values at 1 km from both models were then combined by using weighting functions whereby the spatial distribution of SM was governed more by thermal fluxes during times of strong heat transport and infiltration during moisture abundant soil conditions. THySM values were evaluated using in situ SM measurements from SMAP Core Validation Sites (CVS), the US Department of Agriculture Soil Climate Analysis Network, and the National Oceanic and Atmospheric Administration Climate Reference Network over CONUS. THySM shows higher accuracy than the SMAP / Sentinel-1 (SPL2SMAP_S) 1 km SM product when compared to in situ measurements. The accuracy of THySM is 0.048 m3/m3 based on unbiased root mean square error (ubRMSE), outperforming SPL2SMAP_S by 0.01–0.02 m3/m3. The ubRMSE of THySM 1 km SM over the SMAP grassland/rangeland-dominated CVS sites is better than 0.04 m3/m3, which meets the SMAP mission SM accuracy requirement applied at 9 and 36 km.

In August 2020, soil moisture active passive (SMAP) released a new version of its soil moisture and vegetation optical depth (VOD) retrieval products. In this article, we review the methodology followed by the SMAP regularized dual-channel retrieval algorithm. We show that the new implementation generates SM retrievals that not only satisfy the SMAP accuracy requirements, but also show a performance comparable to the single-channel algorithm that uses the V polarized brightness temperature. Due to a lack of in situ measurements we cannot evaluate the accuracy of the VOD. In this article, we show analyses with the intention of providing an understanding of the VOD product. We compare the VOD results with those from SMOS. We also study the relation of the SMAP VOD with two vegetation parameters: tree height and biomass.

The National Aeronautics and Space Administration Soil Moisture Active Passive (SMAP) mission has been validating its soil moisture (SM) products since the start of data production on March 31, 2015. Prior to launch, the mission defined a set of criteria for core validation sites (CVS) that enable the testing of the key mission SM accuracy requirement (unbiased root-mean-square error 3/m3). The validation approach also includes other (“sparse network”) in situ SM measurements, satellite SM products, model-based SM products, and field experiments. Over the past six years, the SMAP SM products have been analyzed with respect to these reference data, and the analysis approaches themselves have been scrutinized in an effort to best understand the products’ performance. Validation of the most recent SMAP Level 2 and 3 SM retrieval products (R17000) shows that the L-band (1.4 GHz) radiometer-based SM record continues to meet mission requirements. The products are generally consistent with SM retrievals from the European Space Agency Soil Moisture Ocean Salinity mission, although there are differences in some regions. The high-resolution (3-km) SM retrieval product, generated by combining Copernicus Sentinel-1 data with SMAP observations, performs within expectations. Currently, however, there is limited availability of 3-km CVS data to support extensive validation at this spatial scale. The most recent (version 5) SMAP Level 4 SM data assimilation product providing surface and root-zone SM with complete spatio–temporal coverage at 9-km resolution also meets performance requirements. The SMAP SM validation program will continue throughout the mission life; future plans include expanding it to forested and high-latitude regions.

Abstract Representation of irrigation in Earth System Models has advanced over the past decade, yet large uncertainties persist in the effective simulation of irrigation practices, particularly over locations where the on‐ground practices and climate impacts are less reliably known. Here we investigate the utility of assimilating remotely sensed vegetation data for improving irrigation water use and associated fluxes within a land surface model. We show that assimilating optical sensor‐based leaf area index estimates significantly improves the simulation of irrigation water use when compared to the USGS ground reports. For heavily irrigated areas, assimilation improves the evaporative fluxes and gross primary production (GPP) simulations, with the median correlation increasing by 0.1–1.1 and 0.3–0.6, respectively, as compared to the reference datasets. Further, bias improvements in the range of 14–35 mm mo−1 and 10–82 g m−2 mo−1 are obtained in evaporative fluxes and GPP as a result of incorporating vegetation constraints, respectively. These results demonstrate that the use of remotely sensed vegetation data is an effective, observation‐informed, globally applicable approach for simulating irrigation and characterizing its impacts on water and carbon states.

Soil moisture is an essential parameter to understand crop conditions throughout the growing season. Collecting soil moisture data by field observation is labor-intensive, especially when attempting to obtain Conterminous United States (CONUS) geographic coverage. In addition, using soil moisture for assessing current and future crop conditions is best realized by combining soil moisture estimates with concurrent observations of crop conditions. However, until recently, this capability has not been available to the public. In this paper, we present an interoperable data service application system, the Crop Condition and Soil Moisture Analytics (Crop-CASMA) system, that facilitates the retrieval, analysis, visualization, and sharing of soil moisture data for the CONUS. This system delivers a variety of satellite remote sensing based data products that are derived from Soil Moisture Active Passive (SMAP) Level-4 data and SMAP Thermal Hydraulic disaggregation of Soil Moisture (THySM) data, as well as vegetation index data derived from Moderate Resolution Imaging Spectroradiometer (MODIS) observations. To make services interoperable and reusable, all data products are disseminated via Open Geospatial Consortium (OGC) Web Map Service (WMS) and Web Coverage Service (WCS) interface standards. Additionally, a suite of geoprocessing operations, such as geospatial statistics, time-series profile generation, PDF map production, and image composition, has been implemented in the OGC Web Processing Service (WPS) interface standard. The implementation shows the proposed web service system can significantly simplify the mapping and quantitative analysis of soil moisture and crop condition over U.S. cropland. In addition, it is interoperable with GIS software and has been successfully integrated with web-based applications.

Passive microwave remote sensing of soil moisture (SM) requires a physically based dielectric model that quantitatively converts the volumetric SM into the soil bulk dielectric constant. Mironov 2009 is the dielectric model used in the operational SM retrieval algorithms of the NASA Soil Moisture Active Passive (SMAP) and the ESA Soil Moisture and Ocean Salinity (SMOS) missions. However, Mironov 2009 suffers a challenge in deriving SM over organic soils, as it does not account for the impact of soil organic matter (SOM) on the soil bulk dielectric constant. To this end, we presented a comparative performance analysis of nine advanced soil dielectric models over organic soil in Alaska, four of which incorporate SOM. In the framework of the SMAP single-channel algorithm at vertical polarization (SCA-V), SM retrievals from different dielectric models were derived using an iterative optimization scheme. The skills of the different dielectric models over organic soils were reflected by the performance of their respective SM retrievals, which was measured by four conventional statistical metrics, calculated by comparing satellite-based SM time series with in-situ benchmarks. Overall, SM retrievals of organic-soil-based dielectric models tended to overestimate, while those from mineral-soil-based models displayed dry biases. All the models showed comparable values of unbiased root-mean-square error (ubRMSE) and Pearson Correlation (R), but Mironov 2019 exhibited a slight but consistent edge over the others. An integrated consideration of the model inputs, the physical basis, and the validated accuracy indicated that the separate use of Mironov 2009 and Mironov 2019 in the SMAP SCA-V for mineral soils (SOM <15%) and organic soils (SOM ≥15%) would be the preferred option.

A soil moisture (SM) disaggregation algorithm based on thermal inertia (TI) theory was implemented to downscale the soil moisture active passive (SMAP) enhanced product (SPL2SMP$\_$E) from 9 to 1 km over the continental United States. The algorithm applies land surface temperature and normalized difference vegetation index from moderate resolution imaging spectroradiometer (MODIS) at higher spatial resolution to estimate relative soil wetness within a coarse SMAP grid-this MODIS-derived relative wetness is then used to produce the downscaled SMAP SM. Results from the algorithm were evaluated in terms of their spatio-temporal coverage and accuracy using in situ measurements from SMAP core validation sites (CVS), the U.S. Department of Agriculture Soil Climate Analysis Network (SCAN), and the National Oceanic and Atmospheric Administration Climate Reference Network (CRN). Results were also compared with the baseline SPL2SMP$\_$E and the SMAP/Sentinel-1 (SPL2SMAP$\_$S) 1 km product. Overall, the unbiased root-mean-square error (ubRMSE) of the disaggregated SM at the CVS using the TI approach is approximately 0.04 $\text{m}^3/\text{m}^3$, which is the SMAP mission requirement for the baseline products. The TI approach outperforms the SMAP/Sentinel SL2SMAP$\_$S 1 km product by approximately 0.02 $\text{m}^3/\text{m}^3$. Over the agriculture/crop areas from SCAN and CRN sparse network stations, the TI approach exhibits better ubRMSE compared to SPL2SMP$\_$E and SPL2SMAP$\_$S by about 0.01 and 0.02 $\text{m}^3/\text{m}^3$, indicating its advantage in these areas. However, a drawback of this approach is that there are data gaps due to cloud cover as optical sensors cannot have a clear view of the land surface.

Microwave radiometry has provided valuable spaceborne observations of Earth's geophysical properties for decades. The recent SMOS, Aquarius, and SMAP satellites have demonstrated the value of measurements at 1400 MHz for observing surface soil moisture, sea surface salinity, sea ice thickness, soil freeze/thaw state, and other geophysical variables. However, the information obtained is limited by penetration through the subsurface at 1400 MHz and by a reduced sensitivity to surface salinity in cold or wind-roughened waters. Recent airborne experiments have shown the potential of brightness temperature measurements from 500–1400 MHz to address these limitations by enabling sensing of soil moisture and sea ice thickness to greater depths, sensing of temperature deep within ice sheets, improved sensing of sea salinity in cold waters, and enhanced sensitivity to soil moisture under vegetation canopies. However, the absence of significant spectrum reserved for passive microwave measurements in the 500–1400 MHz band requires both an opportunistic sensing strategy and systems for reducing the impact of radio-frequency interference. Here, we summarize the potential advantages and applications of 500–1400 MHz microwave radiometry for Earth observation and review recent experiments and demonstrations of these concepts. We also describe the remaining questions and challenges to be addressed in advancing to future spaceborne operation of this technology along with recommendations for future research activities.

Abstract Microwave remote sensing technology has been applied to produce soil moisture (SM) retrievals on a global scale for various studies and applications. However, due to the limitations of current technology, the native spatial resolution of currently available passive microwave SM products is on the order of tens of kilometers, and this resolution cannot be used to characterize SM variability on a regional scale. To overcome this limitation, a downscaling algorithm based on the thermal inertia theory–derived relationship between SM and temperature difference was developed using outputs from the Global Land Data Assimilation System–Noah Land Surface Model and the land long‐term data record–Advanced Very High Resolution Radiometer normalized difference vegetation index (NDVI) dataset and applied to the Aqua Moderate Resolution Imaging Spectroradiometer land surface temperature/NDVI data to produce a downscaled 1‐km Soil Moisture Active Passive (SMAP) radiometer daily SM product, respectively, at 6:00 a.m. and 6:00 p.m. on a global scale from 2015 to 2020. The evaluation results reveal that the downscaling model performs better in the middle or low latitudes than in high latitudes. It also performs better in warm months than in cold months. The in situ SM observations from dense networks around the world were used to validate the 1‐km and enhanced 9‐km SMAP SM data. The validation metrics indicated that both the 1‐km and 9‐km SM data have overall overestimation trends, and the unbiased RMSE (0.063 m3 m–3 on average), mean absolute error (0.052 m3 m–3 on average), and spatial standard deviation (0.025 m3 m–3 on average) of the 1 km data are generally more accurate than the metrics of the 9‐km SM data, which indicates that the downscaled data provide reliable observed SM information.

Signals of opportunity (SoOp) reflectometry (SoOp-R) is a maturing field for geophysical remote sensing as evidenced by the growing number of airborne and spaceborne experiments. As this approach receives more attention, it is worth analyzing SoOp-R's capabilities to retrieve subsurface soil moisture (SM) by leveraging communication and navigation satellite transmitters. In this research, the Cramer-Rao lower bound (CRLB) is used to identify the effects of variable SoOp-R parameters on the best achievable estimation error for root-zone soil moisture (RZSM). This study investigates the use of multiple frequency, polarization, and incidence angle measurement configurations on a two-layered dielectric profile. The results also detail the effects of variable SM conditions on the capability of SoOp-R systems to predict subsurface SM. The most prevalent observation is the importance of using at least two frequencies to limit uncertainties from subsurface SM estimates. If at least two frequencies are used, the CRLB of a profile is retrievable within the root-zone depending on the surface SM content as well as the number of independent measurements of the profile. For a depth of 30 cm, it is observed that a CRLB corresponding to 4% RZSM estimation accuracy is achievable with as few as two dual-frequency-based SoOp-R measurements. For this depth, increasing number of measurements provided by polarization and incidence angle allow for sensing of increasingly wet SM profile structures. This study, overall, details a methodology by which SoOp-R receiver system can be designed to achieve a desired CRLB using a tradeoff study between the available measurements and SM profile.

Regional quantification of energy and water balance fluxes depends inevitably on the estimation of surface and rootzone soil moisture. The simulation of soil moisture depends on the soil retention characteristics, which are difficult to estimate at a regional scale. Thus, the present study proposes a new method to estimate high-resolution Soil Hydraulic Parameters (SHPs) which in turn help to provide high-resolution (spatial and temporal) rootzone soil moisture (RZSM) products. The study is divided into three phases—(I) involves the estimation of finer surface soil moisture (1 km) from the coarse resolution satellite soil moisture. The algorithm utilizes MODIS 1 km Land Surface Temperature (LST) and 1 km Normalized difference vegetation Index (NDVI) for downscaling 25 km C-band derived soil moisture from AMSR-2 to 1 km surface soil moisture product. At one of the test sites, soil moisture is continuously monitored at 5, 20, and 50 cm depth, while at 44 test sites data were collected randomly for validation. The temporal and spatial correlation for the downscaled product was 70% and 83%, respectively. (II) In the second phase, downscaled soil moisture product is utilized to inversely estimate the SHPs for the van Genuchten model (1980) at 1 km resolution. The numerical experiments were conducted to understand the impact of homogeneous SHPs as compared to the three-layered parameterization of the soil profile. It was seen that the SHPs estimated using the downscaled soil moisture (I-d experiment) performed with similar efficiency as compared to SHPs estimated from the in-situ soil moisture data (I-b experiment) in simulating the soil moisture. The normalized root mean square error (nRMSE) for the two treatments was 0.37 and 0.34, respectively. It was also noted that nRMSE for the treatment with the utilization of default SHPs (I-a) and AMSR-2 soil moisture (I-c) were found to be 0.50 and 0.43, respectively. (III) Finally, the derived SHPs were used to simulate both surface soil moisture and RZSM. The final product, RZSM which is the daily 1 km product also showed a nearly 80% correlation at the test site. The estimated SHPs are seen to improve the mean NSE from 0.10 (I-a experiment) to 0.50 (I-d experiment) for the surface soil moisture simulation. The mean nRMSE for the same was found to improve from 0.50 to 0.31.

A capability for mapping meter-level resolution soil moisture with frequent temporal sampling over large regions is essential for quantifying local-scale environmental heterogeneity and eco-hydrologic behavior. However, available surface soil moisture (SSM) products generally involve much coarser grain sizes ranging from 30 m to several 10 s of kilometers. Hence, a new method is proposed to estimate 3-m resolution SSM using a combination of multi-sensor fusion, machine-learning (ML), and Cumulative Distribution Function (CDF) matching approaches. This method established favorable SSM correspondence between 3-m pixels and overlying 9-km grid cells from overlapping Planet SuperDove (PSD) observations and NASA Soil Moisture Active-Passive (SMAP) mission products. The resulting 3-m SSM predictions showed improved accuracy by reducing absolute bias and RMSE by ~0.01 cm3/cm3 over the original SMAP data in relation to in situ soil moisture measurements for the Australian Yanco region while preserving the high sampling frequency (1–3 day global revisit) and sensitivity to surface wetness (R 0.865) from SMAP. Heterogeneous soil moisture distributions varying with vegetation biomass gradients and irrigation regimes were generally captured within a selected study area. Further algorithm refinement and implementation for regional applications will allow for improvement in water resources management, precision agriculture, and disaster forecasts and responses.

Abstract Ground observations are critical in the validation of soil water content (SWC) estimates from both satellites and land surface models. Portable SWC sensors provide useful information to determine the amount of SWC in the topsoil layer for various applications; however, these probes are not accurate without site‐specific correction. In the present study, we examined and compared six different types of portable electromagnetic (EM) SWC sensors, including multiple sensors made by the same manufacturers, for a total of 16 EM‐based SWC probes equipped with portable data loggers. All SWC probes met the target accuracy after onsite correction—the RMSD was

Prior soil moisture data assimilation (DA) efforts to incorporate human management features such as agricultural irrigation has only shown limited success. This is partly due to the fact that observational rescaling approaches for bias correction used in soil moisture DA systems are less effective when unmodeled processes such as irrigation are the dominant source of systematic biases. In this article, we demonstrate an alternative approach, i.e. anomaly correction for overcoming this limitation. Unlike the rescaling approaches, the proposed method does not scale remote sensing soil moisture retrievals to the model climatology, but it extracts the temporal variability information from the retrievals. The study demonstrates this approach through the assimilation of soil moisture retrievals from the Soil Moisture Active Passive mission into the Noah land surface model. The results demonstrate that DA using the anomaly correction method can better capture the effect of irrigation on soil moisture in agricultural areas while providing comparable performance to the DA integrations using rescaling approaches in non-irrigated areas. These findings emphasize the need to reduce inconsistencies between remote sensing and the models so that assimilation methods can employ information from remote sensing more directly to develop representations of unmodeled processes such as irrigation.

Understanding the human water footprint and its impact on the hydrological cycle is essential to inform water management under climate change. Despite efforts in estimating irrigation water withdrawals in earth system models, uncertainties and discrepancies exist within and across modeling systems conditioned by model structure, irrigation parameterization, and the choice of input datasets. Achieving model reliability could be much more challenging for data-sparse regions, given limited access to ground truth for parameterization and validation. Here, we demonstrate the potential of utilizing remotely sensed vegetation and soil moisture observations in constraining irrigation estimation in the Noah-MP land surface model. Results indicate that the two constraints together can effectively reduce model sensitivity to the choice of irrigation parameterization by 7%–43%. It also improves the characterization of the spatial patterns of irrigation and its impact on evapotranspiration and surface soil moisture by correcting for vegetation conditions and irrigation timing. This study highlights the importance of utilizing remotely sensed soil moisture and vegetation measurements in detecting irrigation signals and correcting for vegetation growth. Integrating the two remote sensing datasets into the model provides an effective and less feature engineered approach to constraining the uncertainty of irrigation modeling. Such strategies can be potentially transferred to other modeling systems and applied to regions across the globe.

Inland open water bodies often pose a systematic error source in the passive remote sensing retrievals of soil moisture. Water temperature is a necessary variable used to compute water emissions that is required to be subtracted from satellite observation to yield actual emissions from the land portion, which in turn generates accurate soil moisture retrievals. Therefore, overestimation of soil moisture can often be corrected using concurrent water temperature data in the overall mitigation procedure. In recent years, several data sets of lake water temperature have become available, but their specifications and accuracy have rarely been investigated in the context of passive soil moisture remote sensing on a global scale. For this reason, three lake temperature products were evaluated against in-situ measurements from 2007 to 2011. The data sets include the lake surface water temperature (LSWT) from Global Observatory of Lake Responses to Environmental Change (GloboLakes), the Copernicus Global Land Operations Cryosphere and Water (C-GLOPS), as well as the lake mix-layer temperature (LMLT) from the European Centers for Medium-Range Weather Forecast (ECMWF) ERA5 Land Reanalysis. GloboLakes, C-GLOPS, and ERA5 Land have overall comparable performance with Pearson correlations (R) of 0.87, 0.92 and 0.88 in comparison with in-situ measurements. LSWT products exhibit negative median biases of −0.27 K (GloboLakes) and −0.31 K (C-GLOPS), whereas the median bias of LMLT is 1.56 K. When mapped from their respective native resolutions to a common 9 km Equal-Area Scalable Earth (EASE) Grid 2.0 projection, similar relative performance was observed. LMLT and LSWT data are closer in performance over the 9 km grid cells that exhibit a small range of lake cover fractions (0.05–0.5). Despite comparable relative performance, ERA5 Land shows great advantages in spatial coverage and temporal resolution. In summary, an integrated evaluation on data accuracy, long-term availability, global coverage, temporal resolution, and regular forward processing with modest data latency led us to conclude that LMLT from the ERA5 Land Reanalysis product represents the most optimal path for use in the development of a long-term soil moisture product.

A multilayer module is incorporated into the Signals of Opportunity (SoOp) Coherent Bistatic Scattering model (SCoBi) for determining the reflections and propagation of electric fields within a series of multilayer dielectric slabs. This module can be used in conjunction with other SCoBi components to simulate complex, bistatic simulation schemes that include features such as surface roughness, vegetation, antenna effects, and multilayer soil moisture interactions on reflected signals. This paper introduces the physics underlying the multilayer module and utilizes it to perform a simulation study of the response of SoOp-R measurements with respect to subsurface soil moisture parameters. For a frequency range of 100–2400 MHz, it is seen that the SoOp-R response to a single dielectric slab is mostly frequency insensitive; however, the SoOp-R response to multilayer dielectric slabs will vary between frequencies. The relationship between SoOp-R reflectivity and the contributing depth is visualized, and the results show that SoOp-R measurements can display sensitivity to soil moisture below the penetration depth. By simulation of simple soil moisture profiles with different wetting and drying gradients, the dielectric contrast between layers is shown to be the greatest contributing factor to subsurface soil moisture sensitivity. Overall, it is observed that different frequencies can sense different areas of a soil moisture profile, and this behavior can enable subsurface soil moisture data products from SoOp-R observations.

Near real-time precipitation is essential to many applications. In Africa, the lack of dense rain-gauge networks and ground weather radars makes the use of satellite precipitation products unavoidable. Despite major progresses in estimating precipitation rate from remote sensing measurements over the past decades, satellite precipitation products still suffer from quantitative uncertainties and biases compared to ground data. Consequently, almost all precipitation products are provided in two modes: a real-time mode (also called early-run or raw product) and a corrected mode (also called final-run, adjusted or post-processed product) in which ground precipitation measurements are integrated in algorithms to correct for bias, generally at a monthly timescale. This paper describes a new methodology to provide a near-real-time precipitation product based on satellite precipitation and soil moisture measurements. Recent studies have shown that soil moisture intrinsically contains information on past precipitation and can be used to correct precipitation uncertainties. The PrISM (Precipitation inferred from Soil Moisture) methodology is presented and its performance is assessed for five in situ rainfall measurement networks located in Africa in semi-arid to wet areas: Niger, Benin, Burkina Faso, Central Africa, and East Africa. Results show that the use of SMOS (Soil Moisture and Ocean Salinity) satellite soil moisture measurements in the PrISM algorithm most often improves the real-time satellite precipitation products, and provides results comparable to existing adjusted products, such as TRMM (Tropical Rainfall Measuring Mission), GPCC (Global Precipitation Climatology Centre) and IMERG (Integrated Multi-satellitE Retrievals for GPM), which are available a few weeks or months after their detection.

Remotely sensed soil moisture retrieved by the Soil Moisture Active and Passive (SMAP) sensor is currently provided at a 9-km grid resolution. Although valuable, some applications in weather, agriculture, ecology, and watershed hydrology require soil moisture at a higher spatial resolution. In this study, a passive microwave soil moisture downscaling algorithm based on thermal inertia theory was improved for use with SMAP and applied to a data set collected at a field experiment. This algorithm utilizes a normalized difference vegetation index (NDVI) modulated relationship between daytime soil moisture and daily temperature change modeled using output variables from the land surface model of the North American Land Data Assimilation System (NLDAS) and remote sensing data from the Moderate-Resolution Imaging Spectroradiometer (MODIS) and Advanced Very High Resolution Radiometer (AVHRR). The reference component of the algorithm was developed at the NLDAS grid size (12.5 km) to downscale the SMAP Level 3 radiometer-based 9-km soil moisture to 1 km. The downscaled results were validated using data acquired in Soil Moisture Active Passive Validation Experiment 2015 (SMAPVEX15) that included in situ soil moisture and Passive Active L-band System (PALS) airborne instrument observations. The resulting downscaled SMAP estimates better characterize soil moisture spatial and temporal variability and have better overall validation metrics than the original SMAP soil moisture estimates. Additionally, the overall accuracy of the downscaled SMAP soil moisture is comparable to the PALS high spatial resolution soil moisture retrievals. The method demonstrated in this study downscales satellite soil moisture to produce a 1-km product that is not site specific and could be applied to other regions of the world using the publicly available NLDAS/Global Land Data Assimilation System data.

Soil moisture ocean salinity (SMOS) mission has been providing L-band multiangular brightness temperature observations at a global scale since its launch in November 2009 and has performed well in the retrieval of soil moisture. The multiple incidence angle observations also allow for the retrieval of additional parameters beyond soil moisture, but these are not obtained at fixed values and the resolution and accuracy change with the grid locations over SMOS snapshot images. Radio-frequency interference (RFI) issues and aliasing at lower look angles increase the uncertainty of observations and thereby affect the soil moisture retrieval that utilizes observations at specific angles. In this study, we proposed a two-step regression approach that uses a mixed objective function based on SMOS L1c data products to refine characteristics of multiangular observations. The approach was found to be robust by validation using simulations from a radiative transfer model, and valuable in improving soil moisture estimates from SMOS. In addition, refined brightness temperatures were analyzed over three external targets: Antarctic ice sheet, Amazon rainforest, and Sahara desert, by comparing with WindSat observations. These results provide insights for selecting and utilizing external targets as part of the upcoming soil moisture active passive (SMAP) mission.

Soil moisture (SM) applications in terrestrial hydrology require higher spatial resolution soil moisture products than those provided by passive microwave remote sensing instruments (grid resolution of 9 km or larger). In this investigation, an innovative algorithm that uses visible/infrared remote sensing observations to downscale Advanced Microwave Scanning Radiometer 2 (AMSR2) coarse spatial resolution SM products was developed and implemented for use with data provided by the Advanced Microwave Scanning Radiometer 2 (AMSR2). The method is based on using the Normalized Difference Vegetation Index (NDVI) modulated relationships between day/night SM and temperature change at corresponding times. Land surface model output variables from the North America Land Data Assimilation System (NLDAS), remote sensing data from the Moderate-Resolution Imaging Spectroradiometer (MODIS), and Advanced Very High Resolution Radiometer (AVHRR) were used in this methodology. The functional relationships developed using NLDAS data at a grid resolution of 12.5 km were applied to downscale AMSR2 JAXA (Japan Aerospace Exploration Agency) SM product (25 km) using MODIS land surface temperature (LST) and NDVI observations (1 km) to produce the 1 km SM estimates. The downscaled SM estimates were validated by comparing them with ISMN (International Soil Moisture Network) in situ SM in the Black Bear–Red Rock watershed, central Oklahoma between 2015–2017. The overall statistical variables of the downscaled AMSR2 SM validation R2, slope, RMSE and bias, demonstrate good accuracy. The downscaled SM better characterized the spatial and temporal variability of SM at watershed scales than the original SM product.