Search

The virgin copper electrode has limited application due to its wear and mechanical properties using Electrical Discharge Machined (EDMed) on Inconel 718 superalloys. In order to enhance the performance of copper electrodes, in this work, Ion Nitriding (IN), Surface Hardening by Laser (LSH) and Hybrid Process (IN+LSH) are performed on copper electrodes to reduce the electrode wear in frontal and lateral. The electrode wear in the frontal and lateral of virgin copper electrode is processed and studied using EDM with varying pulse durations, current and Silicon Carbide (SiC) mixed EDM oil. The surface hardness in virgin and processed electrodes is also investigated. Overall analysis found that the hybrid technique produced a 59% higher hardness than that of virgin copper. The hardness in the EDMed surface was higher than that of the processed copper surface. A 1000μs pulse duration, 2 A current and 15 g/l SiC powder mixing EDM oil produced a low frontal wear in both virgin and processed copper electrodes. The electrode wear was reduced by 30% for frontal and 76% for lateral using a hybrid method. [ABSTRACT FROM AUTHOR]

The effect of Fe on the martensitic transitions, magnetic and inverse magnetocaloric effect in Ni47Mn40-xFexIn13 ribbons (x = 1, 2, 3, and 5) has been investigated. All the ribbon compositions under study have shown the presence of austenite phase at room temperature. The variation of martensitic transition with the increase in Fe-content is non-monotonic. The thermal hysteresis of the martensitic transition increased with the increase in Fe-content. The martensitic transitions shifted to lower temperatures in the presence of high magnetic fields. A maximum magnetic entropy change (ΔSM) of 50 Jkg-1K-1 has been achieved in the Ni47Mn38Fe2In13 (x = 1) ribbon at 282 K for an applied field of 5 T. [ABSTRACT FROM AUTHOR]