Search

Perylenediimide (PDI) compounds with no substituents in their core are widely used as the active units of thin-film organic lasers. Recently, bay-substituted PDIs (b-PDIs) bearing two sterically hindering diphenylphenoxy groups at the 1,7-bay positions have received great attention because they show red-shifted emission with respect to bay-unsubstituted PDIs, while maintaining high photoluminescence (PL) quantum yields and low amplified spontaneous emission (ASE) thresholds even at high doping rates. However, their ASE photostability is relatively low compared to that of state-of-the-art PDIs. Thus, the design of b-PDIs with improved ASE photostability remains a challenge. Here, the synthesis of two b-PDIs with phenyl-type substituents at the imide positions is reported. Complete characterization of their optical properties, including absorption, PL, ASE, and transient spectroscopy, supported also by quantum chemical calculations, is performed with the dyes diluted in either a liquid solvent or a polystyrene film. Film experiments were accomplished at very low doping rates, to resemble the isolated molecule behavior, and also in a range of increasing doping rates, to investigate concentration quenching effects. The reported b-PDIs show improved ASE photostability (3-fold) with respect to b-PDIs with aliphatic-type substituents at the imide positions, whilst they show more propensity toward aggregation. The authors thank the Spanish Ministry of Economy and Competitiveness MINECO and the European Social Funds (project MAT2015-66586-R and FPI fellowship BES-2016-077681), the Ministry of Science and Innovation (MICINN) and the European FEDER funds (CTQ2016-77039-R, PGC2018-099568-B-I00, and PID2019-109200GB-I00, and Unidad de Excelencia María de Maeztu CEX2019-000919-M), and the Generalitat Valenciana (PROMETEO/2020/077 and SEJI/2018/035). J.A. acknowledges the MICINN for the “Ramón-y-Cajal” Fellowship (RyC-2017-23500).

Zigzag edged nanographenes such as peri-acenoacenes are promising materials for organic lasers, but the effects of heteroatom doping on the electronic properties and gain medium performance remain unclear. Herein, the facile synthesis of a new 1,2-oxaborine (BO) doped peri-tetracenotetracene derivative, the bis(1,2-oxaborine)peri-tetracenotetracene (BOTT-Mes), is reported. X-ray crystallographic analysis confirms the BO-doped planar structure and the nonexistence of intermolecular π–π stacking in solid state. Compared with the all-carbon peri-tetracenotetracene derivative (TT-Ar), the BO-doped BOTT-Mes exhibits more disrupted π-conjugation at the BO sites, a lower-lying highest occupied molecular orbital, and a larger energy gap. Due to its rigid skeleton and nonaggregative feature, it displays well-resolved absorption and emission spectra with a small Stokes shift (8 nm) and high photoluminescence quantum yield (80%) when it is dispersed in a polystyrene (PS) thin film. Notably, 1,2-oxaborine doping improves the film amplified spontaneous emission (ASE) performance, with a lower ASE threshold (Eth-ASE = 66 µJ cm–2) as compared to the TT-Ar doped PS film (Eth-ASE = 100 µJ cm–2). Furthermore, a low threshold (22 µJ cm–2) solution-processed distributed feedback laser is fabricated, indicating the feasibility of using BOTT-Mes as gain medium for practical laser applications. J.W. acknowledges financial support from A*STAR Advanced Manufacturing and Engineering grant (A20E5c0089) and National Research Foundation Investigatorship Award (NRF-NRFI05-2019-0005). The group at the University of Alicante acknowledges financial support from the “Ministerio de Ciencia e Innovación” of Spain, European Regional Development Fund and European Social Funds (PID2019-106114GB-I00 and BES-2016-077681) and from the Conselleria de Innovación, Universidades y Sociedad Digital de la Comunidad Valenciana (Grant No. AICO/2021/093).

We report the synthesis of a dibenzodinaphthocoronene (DBDNC) derivative as a novel nanographene with armchair, zigzag, and fjord edges, which was characterized by NMR and X-ray crystallography as well as infrared (IR) and Raman spectroscopies. Ultrafast transient absorption (TA) spectroscopy revealed the presence of stimulated emission signals at 655 nm and 710 nm with a relatively long lifetime, which resulted in dual amplified spontaneous emission (ASE) bands under ns-pulsed excitation, indicating the promise of DBNDC as a near-infrared (NIR) fluorophore for photonics. Our results provide new insight into the design of nanographene with intriguing optical properties by incorporating fjord edges. This work was financially supported by the Okinawa Institute of Science and Technology Graduate University (OIST), the Max Planck Society, JSPS KAKENHI Grant No. JP19K24686, and the European Union’s Horizon 2020 Research and Innovation program under grant agreement no. 101017821 (LIGHT-CAP). G. M. P thanks Fondazione Cariplo (Grant no. 2018-0979) for financial support. Researchers from the University of Alicante acknowledge support from the Spanish Ministerio de Ciencia e Innovación and the European Union (Next Generation EU) through grant no. PID2020-119124RB-I00; and to the Conselleria de Innovación, Universidades y Sociedad Digital de la Comunidad Valenciana (Grant No. AICO/2021/093).

The molecule N,N′-bis(3-methylphenyl)-N,N′-dyphenylbenzidine (TPD) has been widely used in optoelectronic applications, mainly for its hole-transporting properties, but also for its capability to emit blue light and amplified spontaneous emission, which is important for the development of organic lasers. Here, we report deep-blue-emitting distributed feedback (DFB) lasers based on TPD dispersed in polystyrene (PS), as active media, and dichromated gelatin layers with holographically engraved relief gratings, as laser resonators. The effect of the device architecture (with the resonator located below or on top of the active layer) is investigated with a dye (TPD) that can be doped into PS at higher rates (up to 60 wt%), than with previously used dyes (&lt, 5 wt%). This has enabled changing the index contrast between film and resonator, which has an important effect on the laser performance. With regards to thresholds, both architectures behave similarly for TPD concentrations above 20 wt%, while for lower concentrations, top-layer resonator devices show lower values (around half). Remarkably, the operational durability of top-layer resonator devices is larger (in a factor of around 2), independently of the TPD concentration. This is a consequence of the protection offered by the resonator against dye photo-oxidation when the device is illuminated with pulsed UV light.

High-transparency polymers, called optical polymers (OPs), are used in many thin-film devices, for which the knowledge of film thickness (h) and refractive index (n) is generally required. Spectrophotometry is a cost-effective, simple and fast non-destructive method often used to determine these parameters simultaneously, but its application is limited to films where h > 500 nm. Here, a simple spectrophotometric method is reported to obtain simultaneously the n and h of a sub-micron OP film (down to values of a few tenths of a nm) from its transmission spectrum. The method is valid for any OP where the n dispersion curve follows a two-coefficient Cauchy function and complies with a certain equation involving n at two different wavelengths. Remarkably, such an equation is determined through the analysis of n data for a wide set of commercial OPs, and its general validity is demonstrated. Films of various OPs (pristine or doped with fluorescent compounds), typically used in applications such as thin-film organic lasers, are prepared, and n and h are simultaneously determined with the proposed procedure. The success of the method is confirmed with variable-angle spectroscopic ellipsometry. Spanish Ministry of Economy and Competitivity (MINECO) and European Community (FEDER) through grant no. MAT2015-66586-R.

The search of compounds emitting in the near-infrared (NIR) has been accelerated owing to their use in biomedical and telecommunications applications. In this regard, nanographenes (NGs) are attractive materials adequate for integration with other technologies, which have recently demonstrated amplified spontaneous emission (ASE) and lasing across the visible spectrum. Here, the optical and ASE properties of four-zigzag edged NGs of the [m,n]peri-acenoacene family are reported, whose size is increased through conjugation extension by varying n (from 3 to 5) while keeping m = 2. Results show that such 1D conjugation extension method is more efficient in terms of shifting the photoluminescence (PL) to the infrared (PL at 710 nm in the larger compound, PP-Ar) than through 2D conjugation extension as in previously reported NGs (PL at 676 nm with the largest compound FZ3, with n = 3 and m = 4). Additionally, PP-Ar shows dual-ASE (at 726 and 787 nm), whose origin is elucidated through Raman and transient absorption spectroscopies. These compounds’ potential for red and NIR lasing is demonstrated through the fabrication of distributed feedback lasers with top-layer resonators. This study paves the way towards the development of stable low-cost all-plastic NIR lasers. The authors acknowledge financial support from the “Ministerio de Ciencia, Innovación y Universidades” of Spain, European Regional Development Fund and European Social Funds (MAT2015-66586-R, PDI2019-106114GB-I00, BES-2016-077681, PGC2018-098533-B-100 and RED2018-102815-T). J.C. thanks the Junta de Andalucía of Spain (UMA18FEDERJA057). The authors also thank the Research Central Services (SCAI) of the University of Málaga. F.G. acknowledges the Spanish Government for an FPI grant. G.M.P. thanks Fondazione Cariplo (grant no 2018-0979) for the financial support. J.W. acknowledges the “Agency for Science, Technology and Research of Singapore” for financial support from A*STAR AME grant (A20E5c0089). A.M.R. and F.S. have received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. [816313]).

The spectral overlap between stimulated emission (SE) and absorption from dark states (i.e. charges and triplets) especially in the near-infrared (NIR), represents one of the most effective gain loss channel in organic semiconductors. Recently, bottom-up synthesis of atomically precise graphene nanostructures, or nanographenes (NGs), has opened a new route for the development of environmentally and chemically stable materials with optical gain properties. However, also in this case, the interplay between gain and absorption losses has hindered the attainment of efficient lasing action in the NIR. Here, we demonstrate that the introduction of two fluoranthene imide groups to the NG core leads to a more red-shifted emission than the precursor NG molecule (685 vs. 615 nm) and also with a larger Stokes (45 nm vs. 2 nm, 1026 cm-1 vs. 53 cm-1, respectively). Photophysical results indicate that, besides the minimisation of ground state absorption losses, such substitution permits to suppress the detrimental excited state absorption in the NIR, which likely arises from a dark state with charge-transfer character. This has enabled NIR lasing (720 nm) from all-solution processed distributed feedback devices with one order of magnitude lower thresholds than those of previously reported NIR-emitting NGs. This study represents an advance in the field of NGs and, in general, organic semiconductors photonics, towards the development of cheap and stable NIR lasers. G.M.P. thanks Fondazione Cariplo for financial support (grant n° 2018-0979). R.M.M., P.G.B., J.M.V., J.A.Q. and M.A.D.G. acknowledge funding from the Spanish Ministry of Economy and Competitiveness (MINECO), the European Regional Development Fund (FEDER) and European Social Funds (ESF; grant n° MAT2015-66586-R and FPI fellowship BES-2016-077681). Q.C., K.M. and A.N. are grateful for the financial support by the Max Planck Society and the ANR-DFG NLE Grant GRANAO by DFG 431450789. K.M. acknowledges a fellowship from Gutenberg Research College, Johannes Gutenberg University Mainz. R.K. and A.N. appreciate the support by the Okinawa Institute of Science and Technology Graduate University. Y.I. and A.N acknowledge financial support from the Japan Society of Promotion Science Program for Advancing Strategic International Networks to Accelerate the Circulation of Talented Researchers.

The efficient synthesis and electronic properties of two large‐size cove‐edged nanographenes (NGs), CN1 and CN2, are presented. X‐ray crystallographic analysis reveals a contorted backbone for both molecules owing to the steric repulsion at the inner cove position. Noticeably, the dominant structures of these molecules contain four (for CN1) or six (for CN2) localized C=C double bonds embedded in nine (for CN1) or twelve (for CN2) aromatic sextet rings according to Clar's formula, which is supported by bond length analysis and theoretical (NICS, ACID) calculations. Furthermore, Raman spectra exhibit a band associated with the longitudinal CC stretching mode of olefinic double bonds. Owing to the existence of the additional olefinic bonds, both compounds show a small band gap (1.84 eV for CN1 and 1.37 eV for CN2). They also display moderate fluorescence quantum yield (35 % for CN1 and 50 % for CN2) owing to the contorted geometry, which can suppress aggregation in solution. J.W. acknowleges financial support from the MOE Tier 3 programme (MOE2014-T3-1-004) and NRF Investigatorship (NRF-NRFI05-2019-0005). J.C. acknowledges MINECO and Junta de Andalucía of Spain projects (PGC2018-098533-BI00 and UMA18FEDERJA057). M.A.D.-G. and R.M.-M. thank support from MINECO through the research project MAT2015-66586-R and the FPI fellowship (no. BES-2016-077681), respectively.

Chemically synthesized zigzag-edged nanographenes (NG) have recently demonstrated great success as the active laser units in solution-processed organic distributed feedback (DFB) lasers. Here, we report the first observation of dual amplified spontaneous emission (ASE) from a large-size NG derivative (with 12 benzenoid rings) dispersed in a polystyrene film. ASE is observed simultaneously at the 685 and 739 nm wavelengths, which correspond to different transitions of the photoluminescence spectrum. Ultrafast pump-probe spectroscopy has been used to ascertain the underlying photophysical processes taking place in the films. DFB lasers, based on these materials and top-layer nanostructured polymeric resonators (i.e., one or two-dimensional surface relief gratings), have been fabricated and characterized. Lasers emitting close to either one of the two possible ASE wavelengths, or simultaneously at both of them, have been prepared by proper selection of the resonator parameters. The Alicante team was funded by Spanish Government (MINECO) and European Community (FEDER), grant number MAT2015-66586-R. The researcher R.M-M was funded by a MINECO FPI fellowship (No. BES-2016-077681). The Singapore team was funded by the NRF Investigatorship programme (NRF-NRFI05-2019-0005). The Milan team has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 816313). G.M.P. acknowledges funding from Fondazione Cariplo, grant No. 2018-0979. C.D. and S.S. acknowledge funding from ERC Starting Grant SOLENALGAE (No. 679814).

The chemical synthesis of nanographene molecules constitutes the bottom-up approach toward graphene, simultaneously providing rational chemical design, structure-property control and exploitation of their semiconducting and luminescence properties. Here, we report nanographene-based lasers from three zigzag-edged polycyclic aromatics. The devices consist of a passive polymer film hosting the nanographenes and a top-layer polymeric distributed feedback resonator. Both the active material and the laser resonator are processed from solution, key for the purpose of obtaining low-cost devices with mechanical flexibility. The prepared lasers show narrow linewidth (, Chemically synthesized graphene nanosheets offer device design flexibility and improved optoelectronic performance. Here, the authors report solution-processed distributed feedback lasers with graphene nanosheets as active media having linewidths

Perylenediimide (PDI) dyes dispersed in polymer films have demonstrated great success as active materials in thin-film organic lasers (TFOLs). The type of matrix used to host the dye and the dye doping rate are both crucial parameters to optimize laser performance. This work reports the study of two soluble PDIs, the comercial derivative perylene orange (PDI-O) emitting at around 580 nm, and a new dye (b-PDI-A) with substituents at the 1,7 bay positions of the PDI core emitting at around 620 nm, dispersed at different doping levels (up to 8 and 50 wt %, for PDI-O and b-PDI-A, respectively) in two widely used polymers for optoelectronics, polystyrene (PS) and poly(methyl methacrylate) (PMMA). The main goal is to determine which of these two polymers, and at which dye concentration, provides the best results for their use in TFOLs. The assessment of the active materials has been carried out through the analysis of their absorption, photoluminescence, and amplified spontaneous emission (ASE) properties. Their capability to form high-quality optical waveguides has also been studied by determining gain coefficients and waveguide losses. Results have shown that for both types of PDI derivatives PS is better than PMMA at any concentration, which means larger photoluminescence efficiency, lower ASE thresholds, longer ASE operational lifetimes, larger gain, and lower propagation waveguide losses. In addition, the onset concentration at which dye aggregation becomes significant as to negatively affect the optical properties is lower in PMMA than in PS; thus, the larger the blending ratio, the larger the superiority of PS with respect to PMMA is. Financial support from Spanish Ministerio de Economía y Competitividad (MINECO) and the European FEDER funds through Grants MAT2015-66586-R and CTQ2016-77039-R (AEI/FEDER, UE) is gratefully acknowledged. R.M-M is supported by a MINECO FPI contract (no. BES-2016-077681). M.A.D-G acknowledges support from the University of Alicante and to the Spanish Ministry of Education (grant no. PR2015-00390) to perform a sabbatical stay at UCSB.

Latest advances from our research group towards improving the performance of solution-processed distributed feedback lasers will be discussed. They include advances on the laser material and the resonator and their application as optical sensors.