Search

The use of thermal energy storage (TES) contributes to the ongoing process of integrating various types of energy resources in order to achieve cleaner, more flexible, and more sustainable energy use. Numerical modelling of hot storage packed bed storage systems has been conducted in this paper in order to investigate the optimum design of the hot storage system. In this paper, the effect of varying design parameters, including the diameter of the packed bed, the storage material, the void fraction, and the aspect ratio of the packed bed, on storage performance was investigated. COMSOL Multiphysics 5.6 software has been used to design, simulate, and validate an axisymmetric model, which was then applied to evaluate the performance of the storage system based on the total energy stored, the heat transfer efficiency, and the capacity factor. In this paper, a novel-packed bed was proposed based on the parametric analysis. This involved a 0.2 void fraction, 4 mm porous media particle diameter, and Magnesia as the optimum storage material with air as the heat transfer fluid. [ABSTRACT FROM AUTHOR]

Substantial breakthroughs in renewable energy have been made in order to reduce energy-induced climate change. Yet our reliance on these sources is still insufficient. The UK's objective of attaining net-zero emissions by 2050 is highly dependent on shifting to an electrical system that exclusively relies on zero-carbon generation. This entails integrating renewable energy sources, along with other low-carbon sources such as nuclear power, into the energy mix. However, the primary barrier to incorporating additional renewable energy sources into the grid is their intermittent and volatile nature. Therefore, there is a pressing need to stabilise the generation of renewables and manage this volatility by enhancing the balancing mechanism between microgrids and the national grid. This paper examines previous research on microgrids and smart grids, specifically from a supply chain perspective. It has been observed that the majority of the current literature focuses on documenting selfish microgrids that strive to optimise performance at the microgrid level. However, there is an alternative approach that draws inspiration from the field of supply chain management. Consequently, it is possible to enhance a microgrid's performance within the broader system that it belongs to by reconsidering the timing and location of storage utilisation. [ABSTRACT FROM AUTHOR]

Blood is a shear-thinning non-Newtonian fluid in which the viscosity reduces with the shear rate. When simulating arterial flow, it is well established that the non-Newtonian nature is important in the smallest vessels; however, there is no consistent view as to whether it is required in larger arteries, such as the carotid. Here, we investigate the importance of incorporating a non-Newtonian model when applying a plaque deposition model which is based on near-wall local haemodynamic markers: the time-averaged near wall velocity and the ratio of the oscillatory shear index to the wall shear stress. In both cases the plaque deposition was similar between the Newtonian and non-Newtonian simulations, with the observed differences being no more significant than the differences between the selected markers. More significant differences were observed in the haemodynamic properties in the stenosed region, the most significant being that lower levels of near-wall reverse flow were observed for a non-Newtonian fluid. [ABSTRACT FROM AUTHOR]

In recent years, liquid air energy storage (LAES) has gained prominence as an alternative to existing large-scale electrical energy storage solutions such as compressed air (CAES) and pumped hydro energy storage (PHES), especially in the context of medium-to-long-term storage. LAES offers a high volumetric energy density, surpassing the geographical constraints that hinder current mature energy storage technologies. The basic principle of LAES involves liquefying and storing air to be utilized later for electricity generation. Although the liquefaction of air has been studied for many years, the concept of using LAES "cryogenics" as an energy storage method was initially proposed in 1977 and has recently gained renewed attention. With the growing need for alternative energy storage methods, researchers have increasingly explored the potential of cryogenic media, leading to the development of the first LAES pilot plant and a growing body of research on LAES systems. However, one notable drawback of LAES is its relatively low round-trip efficiency, estimated to be around 50–60% for large-scale systems. However, due to its thermo-mechanical nature, LAES offers versatility and can be easily integrated with other thermal energy systems or energy sources across a wide range of applications. Most of the existing literature on LAES focuses on thermodynamic and economic analyses, examining various LAES configurations, and there is a clear lack of experimental studies in this field. This paper aims to conduct a comprehensive review of LAES technology, with a focus on the performance enhancement of these systems. Future perspectives indicate that hybrid LAES solutions, incorporating efficient waste energy recovery sections, hold the most promise for enhancing the tech-no-economic performance of standalone LAES systems. [ABSTRACT FROM AUTHOR]