Search

Human exposure to Volatile Organic Compounds (VOCs) and their presence in indoor and working environments is recognized as a serious health risk, causing impairments of varying severities. Different detecting systems able to monitor VOCs are available in the market; however, they have significant limitations for both sensitivity and chemical discrimination capability. During the last years we studied systematically the use of Fourier Transform Infrared (FTIR) spectroscopy as an alternative, powerful tool for quantifying VOCs in air. We calibrated the method for a set of compounds (styrene, acetone, ethanol and isopropanol) by using both laboratory and portable infrared spectrometers. The aim was to develop a new, and highly sensitive sensor system for VOCs monitoring. In this paper, we improved the setup performance, testing the feasibility of using a multipass cell with the aim of extending the sensitivity of our system down to the part per million (ppm) level. Considering that multipass cells are now also available for portable instruments, this study opens the road for the design of new high-resolution devices for environmental monitoring. [ABSTRACT FROM AUTHOR]

In this work, we address the kinetics of dehydrogenation occurring at high temperatures (HT) in riebeckite, a sodic amphibole with the ideal composition Na 2 Fe 2 3 + Fe 3 2 + Si 8 O 22 (OH) 2. ${\rm{N}}{{\rm{a}}_2}{\rm{Fe}}_2^{3 + }{\rm{Fe}}_3^{2 + }{\rm{S}}{{\rm{i}}_8}{{\rm{O}}_{22}}{({\rm{OH}})_2}.$ We performed isothermal experiments on both powders and single-crystals up to 560 °C and monitored the O-H stretching signal by Fourier transform infrared (FTIR) spectroscopy. Single-crystals show an initial increase in IR absorption intensity due to increasing vibrational amplitudes of the O-H bond stretching, not observed for powders. The OH-intensities vs. time were fitted using the formalism for first-order reactions. The calculated activation energies for H+ diffusion in riebeckite are 159 ± 15 kJ/mol for powders and 216 ± 20 kJ/mol for single crystals, respectively. The exponential factor m in the Avrami-Erofeev equation obtained for crystals ranges between 1.02 and 1.31, suggesting that, unlike powders, the dehydration process in crystals is not a purely first-order reaction. This implies that a second energy barrier must be considered, i.e., diffusion of H+ through the crystal. FTIR imaging showed that H+ diffusion occurs mainly perpendicular to the silicate double-chain. Our results confirm that the release of H+ from riebeckite occurs after the irreversible Fe2+-to-Fe3+ exchange, thus at temperatures >550 °C. To be effective, the process needs the presence of external oxygen that, by interacting with H+ at the crystal surface, triggers the release of H2O molecules. This implies that oxidizing conditions are required for the amphibole to be an efficient water source at depth. [ABSTRACT FROM AUTHOR]

The new mineral species braccoite, ideally NaMn2+5 [Si5AsO17(OH)](OH), has been discovered in the Valletta mine dumps, in Maira Valley, Cuneo province, Piedmont, Italy. Its origin is probably related to the reaction between ore minerals and hydrothermal fluids. It occurs as subhedral crystals in brown-red coloured thin masses, with a pale-yellow streak and vitreous to resinous lustre. Braccoite is associated with tiragalloite, for which new data are provided, as well as gamagarite, hematite, manganberzeliite, palenzonaite, quartz, saneroite, tokyoite, unidentified Mn oxides, organic compounds, and Mn arsenates and silicates under study. Braccoite is biaxial positive with refractive indices α = 1.749(1), β = 1.750(1), γ = 1.760(1). It is triclinic, space group P1̄ , with a = 9.7354(4), b = 9.9572(3), c = 9.0657(3) Å, α = 92̄691(2), β = 117.057(4), γ = 105.323(3)°, V = 740.37(4) Å3 and Z = 2. Its calculated density is 3.56 g/cm3. The ten strongest diffraction lines of the observed powder X-ray diffraction (XRD) pattern are [d in Å, (I), (hkl)]: 3.055 (69)(22̄1), 3.042 (43)(102), 3.012 (65)(32̄1̄ ), 2.985 (55)(23̄1̄ ), 2.825 (100)(213̄), 2.708 (92)(220), 2.627 (43)(23̄2̄), 2.381 (58)(41̄1̄ ), 2.226 (25)(214̄) and 1.680 (433̄)(36). Chemical analyses by wavelength-dispersive spectroscopy electron microprobe gave (wt.%): Na2O 4.06, CaO 0.05, MnO 41.76, MgO 0.96, Al2O3 0.04, CuO 0.02, SiO2 39.73, As2O5 6.87, V2O5 1.43, SO3 0.01 and F 0.04. H2O 2.20 was calculated on the basis of 2OH groups p.f.u. Raman spectroscopy confirmed the presence of (SiO4)4-, (AsO4)3- and OH groups. The empirical formula, calculated on the basis of Σ cations-(Na,K) = 11 p.f.u., in agreement with the results of the crystal structure, is Na1.06(Mn2+4.46Mn3+0.32Mg0.19V3+0.01Al0.01Ca0.01)[Si5(As0.48Si0.37V5+0.15)O17(OH)](OH0.98F0.02); the simplified formula is Na(Mn,Mg,Al,Ca)5[Si5(As,V,Si)O17(OH)](OH,F). Single-crystal XRD allowed the structure to be solved by direct methods and revealed that braccoite is the As-dominant analogue of saneroite. The structure model was refined on the basis of 4389 observed reflections to R1 = 3.47%. Braccoite is named in honour of Dr Roberto Bracco (b. 1959), a systematic minerals collector with a special interest in manganese minerals. The new mineral was approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA 2013-093). [ABSTRACT FROM AUTHOR]