Search

Formation Thermodynamics of zeolite oligomers.

This study evaluated zeolite-based sorbents for iodine gas [I

ConspectusWith the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudocompression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus, increases in this working capacity directly translate to a more compact and efficient cooling system. However, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance and therefore has limited applicability. To this end, synthetic metal-organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given the ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host-guest chemistry and the role of framework pore topology. These molecular-level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorbate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. This atomic level understanding of sorbate-sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we have made strides toward engineering designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.

Although traditional commercially available porous carbon-fluorocarbon working pairs have shown promising applicability for adsorption cooling, advancements in engineered carbons may further improve the performance. Moreover, insights into structure-property relationships that target higher sorption capacities within these synthesized carbons may guide such materials' future design. We utilized hierarchically porous carbons (HPCs), synthesized with colossal microporous and mesoporous content characterized by high surface areas (up to 2689 m2/g) and pore volume values (up to 10.31 cm3/g) toward fluorocarbon R134a adsorption. This unique pore topology leads to exceptional R134a uptake, ∼250 wt %, outperforming the highest uptake carbon material to date, Maxsorb III (∼220 wt %). Material characterizations reveal that the outstanding R134a capacity may be attributed to textural properties and oxygen-terminated functional groups more than graphitization of the material. Most importantly, HPCs are efficiently utilized in a two-bed model chiller device, where the performance shows excellent working capacity (105 wt %, ∼2 times the value of reported carbon materials/R134a). Fluorocarbon adsorption on HPCs also displays fast kinetics (equilibrium time: ∼2 min) mainly driven by physical adsorption (Qst: ∼27 kJ/mol), characteristic of swiftly reversible behavior adsorption-desorption behaviors. This work provides a fundamental understanding of the applicability of HPCs/R134a working pair for adsorption cooling.

Transition-metal pentacyanonitrosylferrates, commonly known as nitroprussides, have a long and documented history. Here, we synthesize cobalt and nickel nitroprussides (NPs) in order to probe their use as sorbents for water and fluorocarbon uptake for potential water harvesting and cooling applications. These NPs show stable and reversible equilibrium sorption isotherms at room temperature with peak uptake values of ∼40 wt % for H

ZIF-8 was synthesized in supercritical carbon dioxide (scCO2 ). In situ powder X-ray diffraction, ex situ microscopy, and simulations provide an encompassing view of the formation of ZIF-8 and intermediary ZnO@ZIF-8 composites in this nontraditional solvent. Time-resolved imaging exposed divergent physicochemical reaction pathways from previous studies of the growth of anisotropic ZIF-8 core@shell structures in traditional solvents. Synthetically relevant physiochemical properties of scCO2 were integrated into classical nucleation theory, relating interfacial forces, calculated through DFTB+ based molecular dynamics (MD), with 3D nucleation outcomes. The kinetics of crystallization were examined and displayed a characteristic signature of time- and temperature-dependent mechanisms over the extent of the reaction. Lastly, it is shown that subtle factors, such as the extent of reaction and the size/shape of sacrificial templates can tailor ZIF-8 composition and size, eliciting control over hierarchical porosity in a nonconventional green solvent.

The demand for cheap and convenient xenon storage continues to rise because of its wide spectrum of applications. It is expected that solid-state adsorbents can provide significant advantages over the current isolated stainless-steel tank-based storage technologies. In this context, we investigated metal organic frameworks for use as adsorbents for xenon. Initially, three representative MOFs were synthesized and characterized in terms of Xe storage. The results were used to validate a computational modeling approach, which was later extended to a larger set of materials. The collected results allowed us to rationalize the key parameters (pore volume, surface area, void fraction etc.), which are important for good performance and selection of the best materials for xenon storage.

The deliberate construction of isoreticular eea-metal-organic frameworks (MOFs) (Cu-eea-1, Cu-eea-2 and Cu-eea-3) and rtl-MOFs (Co-rtl-1 and Co-rtl-2) has been accomplished based on the ligand-to-axial pillaring of supermolecular building layers. The use of different metal ions resulted in two types of supermolecular building layers (SBLs): Kagome (kgm) and square lattices (sql) which further interconnect to form anticipated 3D-MOFs. The isoreticular expansion of (3,6)-connected Cu-MOFs has been achieved with desired eea-topology based on kgm building layers. In addition, two (3,6)-connected Co-rtl-MOFs were also successfully constructed based on sql building layers. The Cu-eea-MOFs were shown to act as hydrogen storage materials with appreciable amount of hydrogen uptake abilities. Moreover Cu-eea-MOFs have also exhibited remarkable CO2 capture ability at ambient condition compared to nitrogen and methane, due to the presence of amide functionalities.

The corrosion of glass waste forms for nuclear waste immobilization is a key metric of their performance. Stage III behavior, the delayed acceleration of glass corrosion, remains the aspect of glass corrosion behavior potentially most impactful to long-term performance. Using the addition of various zeolite phases to trigger this effect, the properties of Stage III behavior were evaluated for three high-level waste glass compositions: SRL-202A, SON68, and AFCI. We show that Stage III behavior can occur at temperatures as low as 22 °C, with rate acceleration observed at 90 °C and 70 °C for all studied glasses, and at 40 °C and 22 °C for two of the compositions (SRL-202A and SON68). Using an Arrhenius fit, the activation energy of the process was found to be highly variable, with values between 39 and 68 kJ⋅mol−1. Stage III behavior was triggered for each of the glasses studied by the addition of each of the four zeolites studied (i.e., Na-P1, Na-P2, analcime, and chabazite). The rates of alteration during Stage III varied very little, from 0.0058 to 0.023 g⋅m−2⋅d−1 for the accelerated region immediately following zeolite addition. The acceleration was found to be transient, with the alteration rate decreasing and then accelerating again as the experiments proceeded. The solution composition was evaluated using the strong base/weak acid discriminator developed by Jantzen et al. and it was found that the addition of zeolites can overcome slightly non-optimal solution conditions for zeolite formation to trigger Stage III behavior.

One approach to reduce increasing concentrations of toxic per- and polyfluoroalkyl substances (PFAS) involves the capture of PFAS from aqueous media using porous materials. The use of highly porous, tunable metal organic framework (MOF) materials is appealing for targeted liquid phase sorption. In this work, we demonstrate the excellent capture of perfluorooctanesulfonate (PFOS) using both the chromium and iron analogs of the MIL-101 framework. Experimental characterization of PFOS uptake reveals unique differences in sorption properties between these two analogs, providing key implications for future PFOS sorbent design. Specifically, STEM-EDS and IR spectroscopy show definitive proof of sorption. Furthermore, XPS analysis shows evidence of a strong interaction between sulfur atoms of the polar headgroup of PFOS and the metal center of the framework in addition to the fluorinated nonpolar tail. Additionally, in situ

Dialkylmagnesium compounds (MgR2, R = C2H5, C4H9 etc.,) have drawn considerable interest in recent years due to their role in commercial polymerization reactions. Herein, we report a thorough account on the reaction intermediates involved in the synthesis of di-n-butylmagnesium from anhydrous magnesium chloride and n-butyllithium. Energy-dispersive X-ray spectroscopy (EDX) and powder X-ray diffraction (PXRD) were used to characterize the products formed in transmetalation reaction and it supports that the Schlenk equilibrium between the nBuMgCl and nBu2Mg may be operating during the synthesis of di-n-butylmagnesium from anhydrous magnesium chloride. 1,4-Dioxane was used to shift the Schlenk equilibrium to form soluble 1,4-dioxane adduct of di-n-butylmagnesium and insoluble MgCl2 based product. PXRD was used to study the transformation of 1,4-dioxane adduct of di-n-butylmagnesium to pure di-n-butylmagnesium.

Rapid and sensitive detection and quantification of trace and ultra-trace analytes is critical to environmental remediation, analytical chemistry and defense from chemical and biological contaminants. Though affinity based electrochemical sensors have gained immense popularity, they frequently do not meet the requirements of desired sensitivity and detection limits. Here, we demonstrate a complementary luminescence mode that can significantly enhance sensitivity of impedance or voltammetric electrochemical sensors. Our methodology involves using a redox probe, whose luminescence properties change upon changing the oxidation state. By tailoring the system such that these luminescence changes can be correlated with the capture of target analytes, we are able to significantly lower the detection limit and improve the efficiency of detection compared to the electrochemical modes alone. Our proof-of-concept demonstration, using a model system designed for Ca2+ capture, illustrated that the luminescent mode allowed us to lower the limits of detection by three-orders of magnitude compared to the impedance or voltammetric modes alone without requiring any modification of electrode design or cell configuration. Further, the linear ranges of detection are 10−8 to 10−3 M in the voltammetry mode, 10−8 to 10−5 M in the impedance mode and 2.5 × 10−11 to 10−7 M in the luminescent mode, providing a large range of operational flexibility.

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are human-made chemicals with high chemical resistance and thermal stability. The extremely stable fluoro-carbon (F-C) skeletons enable PFAS molecules can exist stably in nature especially in the water sources for a long time concerning thermal, chemical, and biodegradation. Perfluorooctanoic acid (PFOA) is one of the most dominant environmental contributors, and its half-life in water has been estimated to be longer than 92 years. Therefore, the monitoring of PFOA level in the water source is needed. It is reported that Zirconium (Zr) based metal-organic frameworks (MOFs) have shown considerable affinity to PFOA molecules. In addition, electrochemical impedance spectroscopy (EIS) as a rapid and sensitive detection method (based on measuring the impedance changes at the electrode/solution interface) is perhaps the most frequently used technique in the investigation of affinity-based transducers. In the pursuit of building a highly efficient screening sensor to PFOA molecules. In this work, the application of Zr based MOF in NP-μFEC as a combined sensing platform to PFOA molecules is conducted. Here, the NP-μFEC is our group proposed new impedance sensing platform with enhanced, three-dimensional distributed electric field. To validate the feasibility of Zr based MOF packed NP-μFEC’s sensing performance. The work is conducted with a ranging concentration of PFOA (in 0.1X PBS) from 150 to 10 ng/L. We finally find that the proposed combination of Zr based MOF and NP-μFEC can show an excellent response to the PFOA molecules, which offers a detection limit lower than the established US Environmental Protection Agency (EPA)'s water contamination level (70 ng/L).

Increased levels of nitrate (NO3-) in the environment can be detrimental to human health. Herein, we report a robust, cost-effective, and scalable, hybrid material-based colorimetric/luminescent sensor technology for rapid, selective, sensitive, and interference-free in situ NO3- detection. These hybrid materials are based on a square-planar platinum(II) salt [Pt(tpy)Cl]PF6 (tpy = 2,2';6',2″-terpyridine) supported on mesoporous silica. The platinum salt undergoes a vivid change in color and luminescence upon exposure to aqueous NO3- anions at pH ≤ 0 caused by substitution of the PF6- anions by aqueous NO3-. This change in photophysics of the platinum salt is induced by a rearrangement of its crystal lattice that leads to an extended Pt···Pt···Pt interaction, along with a concomitant change in its electronic structure. Furthermore, incorporating the material into mesoporous silica enhances the surface area and increases the detection sensitivity. A NO3- detection limit of 0.05 mM (3.1 ppm) is achieved, which is sufficiently lower than the ambient water quality limit of 0.16 mM (10 ppm) set by the United States Environmental Protection Agency. The colorimetric/luminescence of the hybrid material is highly selective to aqueous NO3- anions in the presence of other interfering anions, suggesting that this material is a promising candidate for the rapid NO3- detection and quantification in practical samples without separation, concentration, or other pretreatment steps.

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal-organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni-MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO2 . Further 129 Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.

Through solar, wind, or geothermal reallocation sources, heat transformation via adsorption-based systems provides the means to address the high energy global demand from refrigeration and cooling. However, improvements toward a suitable, high performing adsorbent–refrigerant working pair must be made to boost the applicability of such systems. For the first time, a series of mesoporous metal–organic frameworks (MOFs) have been tested for R134a fluorocarbon adsorption for this purpose. Each of the selected MOFs exhibit excellent, reversible R134a adsorption. Among them, NU-1000 provided an exceptional fluorocarbon uptake of ∼170 wt % near saturation, which is among the highest values reported so far for MOFs. Exhibiting appropriate equilibrium isotherm behavior and working capacities as large as 125 wt %, it is evident that mesoporous MOFs—especially those with hierarchical structure—are promising candidates for chiller applications. Such high performance materials provide significant potential for the de...

Alkali-exchanged SSZ-13 adsorbents were investigated for their applicability in separating N2 from CO2 in flue gas streams using a dynamic breakthrough method. In contrast to IAST calculations based on equilibrium isotherms, K+ exchanged SSZ-13 was found to yield the best N2 productivity, comparable to Ni-MOF-74, under dynamic conditions where diffusion properties play a significant role. This was attributed to the selective, partial blockage of access to the chabazite cavities, enhancing the separation potential in a 15/85 CO2/N2 binary gas mixture.

Photo-Fenton process is an efficient way to treat the organic pollutants in wastewater. However, the efficiency is limited by serious leaching of iron ions, separation of spent catalyst from reaction system for facile recycling, acidic reaction environment (pH＜4). Herein, a novel double perovskite photocatalyst La2AlFeO6 with high surface area was developed to counter these issues. By altering complexing agents, iron ion content discrepancy and B’-O-B” varies in La2AlFeO6 led to a high surface Fe3+ ratio and an excellent magnetic property. >98.4% of phenol could be degraded in a wide pH range over La2AlFeO6 because of the high surface Fe3+ ratio and promotion of generated ·OH, ·O2– and 1O2. The excellent magnetic property would contribute to separate catalyst from water, and led the used La2AlFeO6 to be reused after simple deionized water rinsing and air drying without any further treatment or calcination.

With advances in porous carbon synthesis techniques, hierarchically porous carbon (HPC) materials are being utilized as relatively new sorbents for CO2 capture applications. These HPC materials were used as a platform to prepare samples with differing textural properties and morphologies to elucidate structure–property relationships. It was found that high microporous content, rather than overall surface area, was of primary importance for predicting good CO2 capture performance. Two HPC materials were analyzed, each with near identical high surface area (∼2700 m2/g) and colossally high pore volume (∼10 cm3/g), but with different microporous content and pore size distributions, which led to dramatically different CO2 capture performance. Overall, large pore volumes obtained from distinct mesopores were found to significantly impact adsorption performance. From these results, an optimized HPC material was synthesized that achieved a high CO2 capacity of ∼3.7 mmol/g at 25 °C and 1 bar.

Magnesium (Mg) has many useful applications especially in the form of various Mg alloys that can decrease weight while increasing strength compared with common steels. To increase the affordability and minimize environment consequence, a novel catalyzed organo-metathetical (COMET) process was proposed to extract Mg from seawater aiming to achieve a significant reduction in total energy and production cost compared with the melting salt electrolysis method currently adapted by US Mg LLC. A process flow sheet for a reference COMET process was set up using Aspen Plus. The energy consumption, production cost, and CO2 emissions were estimated using the Aspen economic analyzer. Our results showed that it is possible to produce Mg from seawater with a production cost of $2.0/kg-Mg while consuming about 35.6 kWh/kg-Mg and releasing 7.7 kg CO2/kg-Mg. Under the simulated conditions, the reference COMET process maintains a comparable CO2 emission rate, saves about 40% in production cost, and saves about 15% in energy consumption compared with a simplified US Mg process.

A new efficient and solvent-free method for the synthesis of anhydrous MgCl2 from its hexahydrate is presented. Fluidized dehydration of MgCl2·6H2O feedstock at 200 °C in a porous bed reactor yields MgCl2·nH2O (0 < n < 1), which has a similar diffraction pattern as activated MgCl2. The MgCl2·nH2O is then ammoniated directly using liquefied NH3 in the absence of solvent to form MgCl2·6NH3. Calcination of the hexammoniate complex at 300 °C then yields anhydrous MgCl2. Both dehydration and deammoniation were thoroughly studied using in situ as well as ex situ characterization techniques. Specifically, a detailed understanding of the dehydration process was monitored by in situ PXRD and in situ FTIR techniques where formation of salt with nH2O (n = 4, 2, 1

Organic Rankine cycle (ORC) systems have attracted interest for more than three decades due to advantages in operation at lower working temperature, low maintenance requirements, and relative simplicity (fewer components). In theory, these advantages should make ORC technology more economically attractive for the small and medium power scales (10 kW to 10 MW). Unfortunately, the theoretical promise of ORC systems for power generation has been realized at only a relatively small fraction of the potential market. Although there are a number of reasons for the low utilization of ORC technology, the root cause is directly tied to the relatively low heat-to-power conversion efficiency (2 to 7% typically) and high cost of specially designed expander–generator equipment that is up to 60% of total system cost [1]. The resulting high cost of the power produced just does not make economic sense except in very specialized situations where on-site power is needed but unavailable (at any cost) or where local generation costs are well above regional averages. The overarching objective of the work presented here is to break this paradigm by developing and demonstrating a new harmonic adsorption recuperative power cycle (HARP) system that offers 40% more efficient power generation as compared with a standard ORC system and estimated electric power production costs at very competitive rates below $0.10/kWh.

The rapid growth in the global energy demand for space cooling requires the development of more efficient environmental chillers for which adsorption-based cooling systems can be utilized. Here, in this contribution, we explore sorbents for chiller use via a pore-engineering concept to construct analogs of the 1-dimensional pore metal-organic framework MOF-74 by using elongated organic linkers and stereochemistry control. The prepared pore-engineered MOFs show remarkable equilibrium adsorption of the selected fluorocarbon refrigerant that is translated to a modeled adsorption-based refrigeration cycle. To probe molecular level interactions at the origin of these unique adsorption properties for this series of Ni-MOFs, we combined in situ synchrotron X-ray powder diffraction, neutron powder diffraction, X-ray absorption spectroscopy, calorimetry, Fourier transform infrared techniques, and molecular simulations. Our results reveal the coordination of fluorine (of CH2F in R134a) to the nickel(II) open metal centers at low pressures for each Ni-MOF analog and provide insight into the pore filling mechanism for the full range of the adsorption isotherms. The newly designed Ni-TPM demonstrates exceptional R134a adsorption uptake compared to its parent microporous Ni-MOF-74 due to larger engineered pore size/volume. The application of this adsorption performance toward established chiller conditions yields a working capacity increase for Ni-TPM of about 400% from that of Ni-MOF-74, which combined with kinetics directly correlates to both a higher coefficient of performance and a higher average cooling capacity generated in a modeled chiller.

The abundance of novel metal-organic framework (MOF) materials continues to increase as more applications are discovered for these highly porous, well-ordered crystalline structures. The simplicity of constituents allows for the design of new MOFs with virtue of functionality and pore topology toward target adsorbates. However, the fundamental understanding of how these frameworks evolve during nucleation and growth is mostly limited to speculation from simulation studies. In this effort, we utilize a unique vacuum compatible system for analysis at the liquid vacuum interface (SALVI) microfluidic interface to analyze the formation and evolution of the benchmark MOF-74 framework using time-of-flight secondary ion mass spectrometry (ToF-SIMS). Principal component analysis of the SIMS mass spectra, together with ex situ electron microscopy, powder X-ray diffractometry, and porosimetry, provides new insights into the structural growth, metal-oxide cluster formation, and aging process of Zn-MOF-74. Samples collected over a range of synthesis times and analyzed closely with in situ ToF-SIMS, transmission electron microscopy, and gas adsorption studies verify the developing pore structure during the aging process.

The improvement in adsorption/desorption of hydrofluorocarbons has implications for many heat transformation applications such as cooling, refrigeration, heat pumps, power generation, etc. The lack of chlorine in hydrofluorocarbons minimizes the lasting environmental damage to the ozone, with R134a (1,1,1,2-tetrafluoroethane) being used as the primary industrial alternative to commonly used Freon-12. The efficacy of novel adsorbents used in conjunction with R134a requires a deeper understanding of the host-guest chemical interaction. Metal-organic frameworks (MOFs) represent a newer class of adsorbent materials with significant industrial potential given their high surface area, porosity, stability, and tunability. In this work, we studied two benchmark MOFs, a microporous Ni-MOF-74 and mesoporous Cr-MIL-101. We employed a combined experimental and simulation approach to study the adsorption of R134a to better understand host-guest interactions using equilibrium isotherms, enthalpy of adsorption, Henry’s coefficients, and radial distribution functions. The overall uptake was shown to be exceptionally high for Cr-MIL-101, >140 wt% near saturation while >50 wt% at very low partial pressures. For both MOFs, simulation data suggest that metal sites provide preferable adsorption sites for fluorocarbon based on favorable C-F ··· M+ interactions between negatively charged fluorine atoms of R134a and positively charged metal atoms of the MOF framework.

The deliberate construction of isoreticular eea-metal-organic frameworks (MOFs) (Cu-eea-1, Cu-eea-2 and Cu-eea-3) and rtl-MOFs (Co-rtl-1 and Co-rtl-2) has been accomplished based on the ligand-to-axial pillaring of supermolecular building layers. The use of different metal ions resulted in two types of supermolecular building layers (SBLs): Kagome (kgm) and square lattices (sql) which further interconnect to form anticipated 3D-MOFs. The isoreticular expansion of (3,6)-connected Cu-MOFs has been achieved with desired eea-topology based on kgm building layers. In addition, two (3,6)-connected Co-rtl-MOFs were also successfully constructed based on sql building layers. The Cu-eea-MOFs were shown to act as hydrogen storage materials with appreciable amount of hydrogen uptake abilities. Moreover Cu-eea-MOFs have also exhibited remarkable CO

Mononuclear and dinuclear copper species were synthesized at the nodes of an NU-1000 metal-organic framework (MOF) via cation exchange and subsequent oxidation at 200 °C in oxygen. Copper-exchanged MOFs are active for selectively converting methane to methanol at 150-200 °C. At 150 °C and 1 bar methane, approximately a third of the copper centers are involved in converting methane to methanol. Methanol productivity increased by 3-4-fold and selectivity increased from 70% to 90% by increasing the methane pressure from 1 to 40 bar. Density functional theory showed that reaction pathways on various copper sites are able to convert methane to methanol, the copper oxyl sites with much lower free energies of activation. Combining studies of the stoichiometric activity with characterization by in situ X-ray absorption spectroscopy and density functional theory, we conclude that dehydrated dinuclear copper oxyl sites formed after activation at 200 °C are responsible for the activity.

The rapid, sensitive, and selective detection of target analytes using electrochemical sensors is challenging. ESSENCE, a new Electrochemical Sensor that uses a Shear-Enhanced, flow-through Nanoporous Capacitive Electrode, overcomes current electrochemical sensors' response limitations, selectivity, and sensitivity limitations. ESSENCE is a microfluidic channel packed with transducer material sandwiched by a top and bottom microelectrode. The room-temperature instrument less integration process allows the switch of the transducer materials to make up the porous electrode without modifying the electrode architecture or device protocol. ESSENCE can be used to detect both biomolecules and small molecules by simply changing the packed transducer material. Electron microscopy results confirm the high porosity. In conjunction with the non-planar interdigitated electrode, the packed transducer material results in a flow-through porous electrode. Electron microscopy results confirm the high porosity. The enhanced shear forces and increased convective fluxes disrupt the electric double layer's (EDL) diffusive process in ESSENCE. This disruption migrates the EDL to high MHz frequency allowing the capture signal to be measured at around 100 kHz, significantly improving device timing (rapid detection) with a low signal-to-noise ratio. The device's unique architecture allows us multiple configuration modes for measuring the impedance signal. This allows us to use highly conductive materials like carbon nanotubes. We show that by combining single-walled carbon nanotubes as transducer material with appropriate capture probes, NP-μIDE has high selectivity and sensitivity for DNA (fM sensitivity, selective against non-target DNA), breast cancer biomarker proteins (p53, pg/L sensitivity, selective against non-target HER2).

In the last decade, magnetic nanoparticles (MNPs), especially superparamagnetic iron oxide nanoparticles (SPIONs), have immensely promoted the advancement of diagnostics and theranostics in the biomedical field. The unique properties of the SPIONs-core and the functional gold (Au)-shell together (SPIONS/Au core/shell or CS) have a wide range of biomedical applications including, but not limited to, magnetic resonance imaging (MRI), dual modality MRI/computed tomography (CT), photo-induced and magnetic fluid hyperthermia (MFH), drug delivery, biosensors, and bio-separation. Researchers have made much effort to develop synthesis strategies for size control and surface modifications to achieve the desired properties of these CSs for applications in in vitro and in vivo studies. This review highlights recent developments in the synthesis and biomedical applications of SPIONs/Au CSs, including γ-Fe2O3/Au (maghemite), Fe3O4/Au (magnetite), and MFe2O4/Au (M = divalent metal ions) in the past seven years. More importantly, current trends of SPIONs/Au in relation to the biochemical industry are surveyed. Finally, we outline the developmental needs of SPIONs/Au from the perspective of material synthesis and their novel applications in disease diagnosis and treatment in the near future.

Metal-organic frameworks (MOFs) have recently attracted enormous interest over the past few years in energy storage and gas separation, yet there have been few reports for adsorption cooling applications. Adsorption cooling technology is an established alternative to mechanical vapor compression refrigeration systems and is an excellent alternative in industrial environments where waste heat is available. We explored the use of MOFs that have very high mass loading and relatively low heats of adsorption, with certain combinations of refrigerants to demonstrate a new type of highly efficient adsorption chiller. Computational fluid dynamics combined with a system level lumped-parameter model have been used to project size and performance for chillers with a cooling capacity ranging from a few kW to several thousand kW. These systems rely on stacked micro/mini-scale architectures to enhance heat and mass transfer. Recent computational studies of an adsorption chiller based on MOFs suggests that a the...

Designing zeolites with tunable physicochemical properties can substantially impact their performance in commercial applications, such as adsorption, separations, catalysis, and drug delivery. Zeolite synthesis typically requires an organic structure-directing agent to produce crystals with specific pore topology. Attempts to remove organics from syntheses to achieve commercially viable methods of preparing zeolites often lead to the formation of impurities. Herein, we present organic-free syntheses of two polymorphs of the small-pore zeolite P (GIS), P1 and P2. Using a combination of adsorption measurements and density functional theory calculations, we show that GIS polymorphs are selective adsorbents for H2 O relative to other light gases (e.g., H2 , N2 , CO2 ). Our findings refute prior theoretical studies postulating that GIS-type zeolites are excellent materials for CO2 separation/sequestration. We also show that P2 is significantly more thermally stable than P1, which broadens the operating conditions for GIS-type zeolites in commercial applications and opens new avenues for exploring their potential use in processes such as catalysis.

Gas-consuming electroreduction reactions (GERs), including carbon dioxide reduction reaction, two-electrons oxygen reduction reaction, and nitrogen reduction reaction, are viewed as promising clean and renewable approaches for the sustainable chemicals synthesized from a gas reduction in aqueous mediate, solving the energy and environmental crisis from over-dependent of the fossil fuels. However, due to sluggish kinetics and adsorption linear scaling relations, GERs showcase unfavorable activity, selectivity, and stability, impeding their scale-up application. Over the past few years, tremendous efforts have been made to boost electrocatalyst performance via imposing strain engineering on the linear scaling relations breakup and introducing strain engineered interface to accelerate kinetics. In this review, we summarize the fundamentals and applications of strain engineering-based strategies for boosting electrocatalytic performance in typical GERs. In detailed, the fundamentals of GERs, strain engineering, and linear scaling relations are firstly provided. Furthermore, the impacts of strain engineering on the breaks of linear scaling relations and the corresponding process control mechanism are presented. Moreover, the strain strategies and its application for the individual GERs are highlighted. Additionally, apart from polishing the performance of intrinsic active sites, the progress of gas mass diffusion and charge transfer enhanced by constructing superhydrophobiciltiy/superaerophilicity solid/liquid/gas interfaces, is also needed to be presented. Finally, we discuss guidelines for future opportunities and challenges of strain engineering for boosting electrocatalytic performance. Collectively, we hope that this review will offer a fine control strategy for electrocatalytic performance and clearly illustrate the in-depth mechanism for the catalytic process under the role of strain engineering. Furthermore, many anticipations of such inspirations could extend to synchronized control of multistep elementary competitive reaction in the sustainable production of emerging clean energy and environmental remediation communities.

Alkali-exchanged SSZ-13 adsorbents were investigated for their applicability in separating N

Chabazite SSZ-13 samples with varying silica content (Si/Al from 5 to ∼20) were synthesized under both stirring and static conditions to obtain materials with changing particle size and morphology and thoroughly analysed using various characterization techniques. The role of particle size and chemical compositions in CO2 and N2 adsorption measurements was investigated. The Si/Al ratio played a major role in CO2 adsorption; Al-rich SSZ-13 demonstrated a higher CO2 uptake than an Al-poor material. This was attributed to the high density of active charged species in the chabazite cage. The particle size also played a role in the sorption capacities; smaller particles, obtained under stirring conditions, showed enhanced CO2 uptake compared to larger particles of similar chemical composition. This was associated with a higher contribution of micropores containing active sites for CO2 adsorption.

Zeolite HOU-2 (LTA type) is prepared with the highest silica content (Si/Al = 2.1) reported for Na-LTA zeolites without the use of an organic structure-directing agent. The rational design of Si-rich zeolites has the potential to improve their thermal stability for applications in catalysis, gas storage, and selective separations.

A flexible metal-organic framework constructed from a flexible linker is shown to possess the capability of separating mixtures of polar compounds (propanol isomers) by exploiting the differences in the saturation capacities of the constituents. Transient breakthrough simulations show that these sorption-based separations are in favor of the component with higher saturation capacity.

Metal–organic frameworks (MOFs) have shown promising behavior for adsorption cooling applications. Using organic ligands with 1, 2, and 3 phenylene rings, we construct moisture-stable Ni-MOF-74 members with adjustable pore apertures, which exhibit excellent sorption capabilities toward water and fluorocarbon R134a. To our knowledge, this is the first report of adsorption isotherms of fluorocarbon R134a in MOFs. The adsorption patterns for these materials differ significantly and are attributed to variances in their hydrophobic/hydrophilic pore character associated with differences in pore size.