Search

BACKGROUND RESULTS CONCLUSION Recent shifts in consumer dietary preferences have led to a significant decline in rice consumption in Korea, resulting in surplus rice production. To address this issue, rice flour has been proposed as a substitute for wheat flour. However, the physical, chemical and structural differences between rice and wheat, particularly in grain hardness, pose challenges in using rice flour as an alternative. Understanding the genetic factors that influence rice grain hardness is crucial for improving the milling process and producing high‐quality rice flour suitable for wheat flour substitution.In this study, various grain traits, including length, width, thickness, length‐to‐width ratio and hardness, were measured in a population of brown and milled rice. Quantitative trait locus (QTL) analysis revealed a significant association between grain hardness and thickness, with QTLs for grain hardness mapped on chromosomes 1 and 12 for brown and milled rice, respectively. A total of 20 candidate genes related to grain hardness were identified through QTL analysis. Among them, OsFLOq12 (LOC_Os12g43550) was identified as a key gene influencing grain hardness, which encodes a Ras small GTPase. Phenotypic analysis showed differences in endosperm appearance and particle size between lines with low and high grain hardness.The genetic analysis of OsFLOq12 revealed a single nucleotide polymorphism associated with grain hardness. This study provides valuable insights into the genetic background of grain hardness, offering a foundation for breeding rice varieties optimized for flour production as a viable substitute for wheat flour. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Gluten‐free diets are characterized by lower nutritional quality. The use of green plantain flour in gluten‐free formulations appears as an alternative to overcome this deficiency, considering that green plantains have a relevant content of bioactive compounds, dietary fiber, including resistant starch. The objective of this work was to evaluate the effect of the addition of native and modified by hydrothermal treatment green plantain whole flours in the form of gluten‐free cupcakes. The density, yield, and microstructure of the dough, specific volume (SV), height, crumb analysis, color, texture, and sensory acceptability of the cupcakes were evaluated. Partial replacement (40%) of rice flour by native and modified flours produced darker, redder cupcakes, less yellowish and with less color intensity. Sensory analysis revealed higher acceptance for cupcakes with native and modified flours, compared to the control, for appearance, flavor, texture, aroma, and overall acceptance. The native flour was the most viable option, as the cupcake produced with it showed the best values for hardness and chewiness, without changing elasticity and SV, in addition to superior sensory acceptance than the control and similar to cupcakes with other modified flours. Practical Application: Pursuing to meet the market demand for gluten‐free products, with the cake being one of the most requested products in this market, and taking in account that green banana, from different cultivars, has gained interest for the production of flours. The production of flour and bakery products is of great interest to the food industry, not only because of its flavor and properties but also due to the economic and sustainable viability of producing whole green plantain flour with the potential for application, promoting diversification and innovation in the gluten‐free functional products market. [ABSTRACT FROM AUTHOR]

Plant‐based yogurt alternatives (YAs) are in demand due to the societal prevalence of milk sensitivities and allergies and some consumers abstaining from animal‐derived products. Producing rice flour YAs has considerable potential because rice flour is hypoallergenic, more economical compared to plant milks, and there are no commercial rice‐based YAs. A new higher protein variety of rice was developed, Frontière, which is sold as both brown and white rice. Therefore, the overall goals of this study were (1) to compare physicochemical properties of YAs from Frontière brown (Frontière brown rice flour [FBRF]) and white (Frontière white rice flour [FWRF]) high‐protein rice flours to regular protein level rice flours and (2) to evaluate the sensory quality of Frontière YAs compared to commercial plant‐based oat yogurt. Rice flours were fermented with Streptococcus thermophilus, Lactobacillus delbrueckii subsp. bulgaricus, and Lacticaseibacillus rhamnosus (a probiotic) to produce FBRF‐ and FWRF‐YAs. A consumer study was conducted to compare FBRF‐ and FWRF‐YAs to a commercially available oat‐based YA. Consumers rated the YAs using 9‐point hedonic and just‐about‐right (JAR) scales. Protein, fat, and ash levels were greater, whereas starch levels and peak viscosities were lower for BRFs than for WRFs. The use of BRF resulted in longer fermentation times but higher bacteria counts for YAs. FWRF‐YA was preferred in terms of overall flavor and liking, sweetness, and tartness. Purchase intent (PI) for FWRF‐YA increased 2.6 times after providing a health claim. This research showed that rice flour can be used to produce YAs with probiotic counts above the minimum recommended, which provides added health benefits for consumers. Practical Application: This research provides a possible new use of Frontière high‐protein rice flour to produce plant‐based yogurts. This will help the rice industry by adding value, and those who are vegan, allergic to casein, or lactose‐intolerant will have another option for a plant‐based yogurt. Moreover, the greater levels of probiotic bacteria found in the brown rice flour YAs can potentially provide greater health benefits, making brown rice flour a better choice for making rice‐based YAs. [ABSTRACT FROM AUTHOR]

Summary: This study explored the feasibility of 3D food printing with zucchini puree‐rice flour mixtures, focussing on factors impacting print quality for home‐based applications. The effects of printing variables, including fill ratio (25%, 50%, 75% and 100%) and printing bed temperature (65 °C, 75 °C and 85 °C), were assessed on the print quality of the samples, along with rice flour ratio and a freeze‐thaw step commonly employed by general consumers. Increasing rice flour content enhanced water retention, leading to improved printability in terms of shape retention and dimensional accuracy. Higher printing surface temperatures promoted starch gelation in the initial layers, resulting in better shape retention and improved print scores at moderate rice flour ratios. The highest print quality, determined by dimensional accuracy and visual observations, was achieved with a rice flour puree ratio of 5:10, printed at a 100% infill ratio and 85°C printing bed temperature. While freeze‐thawing the mixtures preserved printability, it weakened the structure, leading to increased syneresis and spreading. Cooking fresh samples at 170 °C for 20 min after printing caused surface cracks, whereas freeze‐thawed samples retained their smooth surface. Further research is needed to optimise printing parameters, considering typical preparation steps that may be applied to vegetable flour mixtures before and after 3D printing. [ABSTRACT FROM AUTHOR]

Summary: Due to their gluten‐free dietary needs, celiac patients cannot find bread with the required texture characteristics. The aim of this study was to evaluate the performance of psyllium powder in the production of rice‐based, gluten‐free bread rolls. In this case, five different bread rolls were produced by adding different proportions (0%, 25%, 50%, 75% and 100%) of psyllium powder combinations to bread dough made with rice flour. Moisture and ash content, colour values, volume, symmetry and uniformity indices, textural properties and sensory properties were taken into consideration. It was observed that the addition of psyllium powder gave the bread rolls a spongy structure and decreased the hardness values. As the amount of psyllium powder in the dough formulation increased, darkening in colour and increase in moisture values were observed. In addition, the bread sample psyllium powder and rice flour ratios (1:1) had the largest volume index value (98.67 mm), while the same product received the highest score in SAW techniques. [ABSTRACT FROM AUTHOR]

Summary: This study investigated the influence of hydrocolloid–flour mixtures on textural, structural, oil absorption and optical characteristics of batter‐coated fried meat. The batter coatings were formulated with corn, wheat and rice flours along with different hydrocolloids (methylcellulose, carboxyl methylcellulose, xanthan gum, locust bean gum, gum arabic). Textural and structural properties were assessed by acoustic‐mechanical and scanning electron microscopy, respectively. Results showed that the addition of hydrocolloids improved crispiness and reduced oil content in fried products. Comparative performances of the hydrocolloids in improving crispiness were in decreasing order as gum arabic > locust bean > xanthan gum > carboxyl methylcellulose > methylcellulose. Textural properties of the hydrocolloids were interwoven with the flour type, where corn flour demonstrating better crispiness than wheat and rice flours. The crispiness of hydrocolloids added batter increased up to seven times than the control samples. The hydrocolloids were found to significantly influence (P ≤ 0.05) the appearance of battered meat formulated with corn and wheat flours. Hydrocolloids showed prominent effect on wheat flour‐based batter in terms of average pore area, whereas highest impact on corn flour regarding the number of pores formed. [ABSTRACT FROM AUTHOR]

Compact food bars have become consumers' first choice as an alternative to unhealthy snacks, meal replacements or quick energy sources before exercise. Considering the increasing need of society for such products, the aim of this research is to investigate the effect of using quinoa flour in raw and processed form (flaked and roasted) and different levels of rice flour (zero, 15 and 30%) on the physicochemical (moisture, fat, protein, ash, carbohydrates, calories, specific volume, color, water activity and texture) and sensory characteristics of compact food bars. The results showed that the processing applied on quinoa, while improving the quality of the product, led to a decrease in moisture, fat and water activity, and an increase in ash and texture hardness, and the samples containing quinoa flour showed the highest amount of protein. In addition, the flaking process decreased carbohydrate and specific volume and roasting increased them and had a significant effect on the color changes of the samples. The results of the sensory analysis of the samples also showed that the processing done on quinoa and increasing the amount of rice flour in the formulation increased the overall acceptance of the product. Finally, the sample produced with quinoa flaked flour and containing 30% of rice flour (8.10% moisture, 5.90% fat, 5.74% protein, 0.78% ash, 79.47% carbohydrates and 393.97 Kcal/100g calories) was chosen as the optimal formula. [ABSTRACT FROM AUTHOR]

Sourdough fermentation is rarely used for gluten-free flatbread (GFFB), a product that is challenging to produce, especially when using high-fiber ingredients that bring nutritional benefits but lead to physical deterioration. The aim of this study was therefore to evaluate the fermentation performance of carob flour (CSPF), proso millet flour (PMF), and proso millet bran (PMB) individually and in combination with Limosilactobacillus fermentum and Kluyveromyces marxianus (LF + KM) and to compare the performance of LF + KM with a commercial starter (LIVENDO® LV1). A mixture design (n = 13) was used to evaluate the fermentation performance of LF + KM (total titratable acidity (TTA); lactobacilli and yeast growth; acetic and lactic acid, fructose, glucose, and saccharose content) at 35 °C for 16 h. The comparison of LF + KM with LV1 fermentation was based on the acidity rate, fermentation quotient, TTA, and finally by determining the physical properties (texture, shape, color) of a rice–corn GFFB in which 10% of flour was supplemented with the sourdoughs. PMB promoted the growth of lactobacilli and the production of organic acids, especially in combination of CSPF and PMF. The optimum flour ratio was 2.4:1:1.2 (PMB:PMF:CSPF). LF + KM shortened the sourdough fermentation time by 2.5 times compared to LV1. The use of LF + KM sourdough reduced the hardness (32%) and chewiness (28%) of the GFFB, while the volume (35%) was increased compared to LV1 sourdough. This study shows the potential of using local alternative flours in sourdough fermentation for the production of GFFB. [ABSTRACT FROM AUTHOR]

This study investigated the quality changes of quick‐frozen wet rice flour before and after freeze‐thaw cycles. As the freeze‐thaw cycle was prolonged, the water mobility of quick‐frozen wet rice flour decreased and the pore size and porosity of the microstructure increased. As a result, the hardness, cooking loss, water absorption, and water precipitation of the rice flour increased, while the sensory score and viscosity decreased. Correlation analysis showed that porosity was positively correlated with the hardness and water absorption of rice flour, and negatively correlated with structural properties such as shearing work and resilience. Water absorption and water precipitation rate were positively related to cooking loss. Thus, moisture migration in rice flour induced microstructural changes to cause alterations in texture, cooking, and sensory properties. Interestingly, quick‐frozen wet rice flour still possessed good texture, cooking, and sensory qualities after two freeze‐thaw cycles. This study laid the foundation for the development of high‐quality quick‐frozen wet rice flour. [ABSTRACT FROM AUTHOR]

Black rice, known for its high anthocyanin and antioxidant content, is native to Asian countries like Japan, China, Thailand, India, and Indonesia. In India, it is primarily grown in Manipur, Assam, and Meghalaya, where it is called Chakhao. Despite its health benefits, black rice remains underutilized in food processing. This study examined the rheological behavior of Chakhao black rice flour blended with wheat flour (BR1, BR2, BR3) using alveograph and mixograph tests. BR3 showed the best baking properties, with a G value of 17.5 and p value of 90 mm H₂O, indicating its suitability for baking, especially cookies. Nutritionally, BR3 cookies were rich in protein (10.4%), fiber (2.91%), and minerals (2.95%). High starch retrogradation limits use in bread and biscuits. BR3 cookies are sensory-acceptable and can be marketed as healthy, functional products. Future research could focus on improving taste while maintaining health benefits. [ABSTRACT FROM AUTHOR]

Copyright of Food & Fermentation Industries is the property of Food & Fermentation Industries and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Near-infrared spectroscopy (NIRS) holds significant promise in detecting food adulteration due to its non-destructive, simple, and user-friendly properties. This study employed NIRS in conjunction with chemometrics to estimate the content of low-price rice flours (Nanjing, Songjing, Jiangxi silk, Yunhui) blended with high-price rice (Wuchang and Thai fragrant). Partial least squares regression (PLSR), support vector regression (SVR), and back-propagation neural network (BPNN) models were deployed to analyze the spectral data of adulterated samples and assess the degree of contamination. Various preprocessing techniques, parameter optimization strategies, and wavelength selection methods were employed to enhance model accuracy. With correlation coefficients exceeding 87%, the BPNN models exhibited high accuracy in estimating adulteration levels in high-price rice. The SPXY-SG-BPNN, SPXY-MMN-BPNN, KS-SNV-BPNN, and SPXY-SG-BPNN models showcased exceptional performance in discerning mixed Wuchang japonica, Thai fragrant indica, and Thai fragrant Yunhui rice. As shown above, NIRS demonstrated its potential as a rapid, non-destructive method for detecting low-price rice in premium rice blends. Future studies should be performed to concentrate on enhancing the models' versatility and practical applicability. [ABSTRACT FROM AUTHOR]

The grinding process is one of the key factors affecting the quality of glutinous rice flour (GRF). As an emerging grinding method, semidry grinding aims to solve the problems of the high yield of wastewater in traditional wet grinding and the high content of damaged starch in dry grinding, in which the water content has a great influence on the quality of GRF. However, semidry grinding has not yet been formally put into production due to limitations such as the long time required to adjust the water content of rice grains. Therefore, this work was carried out to shorten the soaking time of glutinous rice (GR) by hot air pretreatment, and to conduct a systematic and in-depth study of the effect of water content on the quality of GRF, including water distribution, water hydration properties, thermal properties, rheological properties, and microstructure. The results showed that the GRF with higher water content had lower water solubility and higher enthalpy of pasting, which were due to the low content of damaged starch and the high degree of crystallization. The particle size of the GRF became smaller as the interaction between water and starch was enhanced and the GR was softened. In addition, the viscosity and elasticity of the GRF were also improved with an increase in water content. This work provides theoretical guidance for the improvement of semidry grinding to a certain extent. [ABSTRACT FROM AUTHOR]

In the production of wood fuel pellets, starch is frequently used as an additive to enhance bonding and durability. This study investigated the effectiveness of four different kinds of starches as additives, each at a concentration of 5% (dry basis), when combined with sawdust from Scots pine (Pinus sylvestris). The starches tested included plain wheat flour, hydrothermally treated wheat starch, wheat starch with amylose-like properties, and nearly pure amylopectin obtained from waxy rice flour. All pellets were produced at a die temperature of 100 °C using a Single Pellet Press, with varying moisture contents of 5%, 8%, 11%, and 14% (wet basis). The pellets were evaluated for compression work, back pressure, physical density, hardness, and moisture content. Additionally, chemical bonding was assessed using FT-IR spectroscopy. Compression energy was found to be influenced by moisture content, irrespective of starch utilization, and it decreased with increasing moisture levels, especially between 5 to 8% (wb). The inclusion of starch led to notably higher pellet hardness, with amylose yielding the hardest pellets, 34±3 kg when the moisture content was 11%. Based on this study, it is recommended to use hydrothermally treated wheat flour, as it consistently produced high-quality pellets. [ABSTRACT FROM AUTHOR]

This study blended five types of beans—florid kidney bean, red adzuki bean, chickpea, black bean, and white kidney bean—with glutinous rice flour (GRF) to create a synergistic heat–moisture treatment (HMT). We investigated the effects of this combination on the digestibility of the glutinous rice mixture and the quality of sweet dumplings. The inclusion of beans, along with HMT, altered the granular morphology, adhesive qualities, thermal characteristics, crystallinity, and protein secondary structure of the blended powders compared to GRF. Notably, the starch granules in the glutinous rice flour with red adzuki bean (R‐GRF) were more complete in morphology, compact in structure, and exhibited higher heat stabilization and crystallinity, with significant changes in protein secondary structure. These modifications resulted in a low expected glycemic index (eGI) value of 52.01. Additionally, the quality assessment of the fast‐frozen sweet dumplings showed that those made with red adzuki bean mixed with glutinous rice flour (R‐SD) had superior texture, reduced cracking, and less water loss compared to those made with GRF (G‐SD), while maintaining similar color and odor to G‐SD. The eGI value of 52.21 for R‐SD also fell within the low eGI range, indicating its potential for developing low‐eGI foods for patients with T2DM and other special populations. [ABSTRACT FROM AUTHOR]

Summary: Gluten‐free rice penne (GFRP) was developed from low amylose rice flour by incorporating egg white protein, soy protein isolate, guar gum and xanthan gum to produce penne with low estimated glycaemic index (eGI). The rheology of rice flour, textural properties, cooking quality, resistant starch (RS) and eGI of GFRP were investigated. Addition of proteins and hydrocolloids increased the storage modulus (G′) and loss modulus (G″). Rice gel with proteins and hydrocolloids formed a stronger and more elastic gel than the control, with highest G′ observed in rice gel with 5% egg white protein and 1% guar gum. Incorporation of proteins and hydrocolloids in GFRP significantly increased firmness, improved cooking quality and increased RS content. The eGI of GFRP added with egg white protein and guar gum reduced from seventy‐one to fifty‐three. Results suggested that the development of low eGI penne was possible by incorporating egg white proteins and guar gum. [ABSTRACT FROM AUTHOR]

Buckwheat is a pseudocereal with a high starch content and compounds of nutritional interest, making it suitable for use in gluten-free baking. A simplex-centroid design was employed to investigate the effects of the mixture components of buckwheat flour, buckwheat starch, and rice flour in nine different proportions. The minimum and maximum limits for the components were 10% and 30% for buckwheat flour, 20% and 40% for buckwheat starch, and 50% and 70% for rice flour, aiming to create diverse gluten-free breads for evaluation. The utilized flours underwent characterization, and their micro- and macronutrient amounts, along with their amino acid compositions, were determined. Specific volume analysis, water loss determination, texture assessment, and sensory evaluations were conducted on the breads. It was observed that the proportion of starch and buckwheat flour directly influenced the specific volume and water loss during product storage. Through sensory analysis, the formulation with the highest acceptance and purchase intention among tasters was identified. Free-choice profiling analysis established the sensory profiles of the developed gluten-free bread formulations. According to tasters, the formulations exhibited characteristics of whole meal bread, noticeable softness, and a homogeneous alveolar distribution. The gluten-free bread was wellreceived by 124 tasters, with a purchase intention rate of 93.55%. [ABSTRACT FROM AUTHOR]

Improving the taste quality of rice porridge in a scientific way is essential to guiding residential and commercial production. This study aimed to determine the impact of konjac glucomannan (KGM) on the taste quality of rice porridge. The obtained results showed that the optimal concentration of KGM added to rice porridge is 1%. This was primarily observed via the reduction in water absorption, swelling power, and iodine blue value, thus increasing the hardness of rice porridge. At the same time, KGM also reduced the free water content and improved the water-holding capacity of rice porridge. Nevertheless, the pasting properties showed that the high viscosity of KGM raised the pasting viscosity of rice flour, thereby enhancing the stickiness of rice porridge with the increase in the KGM concentration. In addition, KGM gave the rice porridge a stronger aroma. Sensory evaluations further confirmed significant improvements in the color, odor, palatability, and overall acceptability of KGM-supplemented rice porridge (p < 0.05). To summarize, adding an appropriate amount of KGM was beneficial in forming a richer flavor and improving the taste quality of rice porridge. The findings offer valuable insights into the scientific processing of rice porridge products. [ABSTRACT FROM AUTHOR]

The present investigation was conducted to analyze the impact of the gamma irradiation dose on the microbiological, structural, and functional properties of buckwheat, cowpea, oat, and brown rice flour. The results showed that as the irradiation dose increased, there was a significant reduction in the total bacterial count (TBC) and the total yeast and mold count (TYMC). Specifically, a decrease of 60.67% was observed in TBC and 63.49% in TYMC compared to unirradiated samples, even at a dose of 5 kGy. In addition, there was a significant increase in the total phenolic content of all flour samples (8% for cowpea to 56.48% for buckwheat) after exposure to irradiation. In particular, buckwheat flour exhibited the highest DPPH inhibition capacity of 79.80% when irradiated at 15 kGy, outperforming the other flour samples. However, the FTIR spectra remained unchanged. The application of irradiation to cereals and legumes has recently been recognized as an innovative method to address the issues caused by insects and pests. Gamma irradiation can be applied to the product after packaging, reducing the risk of cross‐contamination. Additionally, this technique is nonthermal and does not leave any residues. The dietary value, sensory, and other quality parameter characteristics of pseudocereals and cereal‐related products can be preserved by subjecting them to controlled irradiation doses. [ABSTRACT FROM AUTHOR]

In a previous study, rice bread was prepared using a combination of rice–wheat mixed flour. To investigate the impact of the partial adoption of extruded rice flour (ERF) on mixed flour (MF) and mixed dough (MD), the effects of adding ERF on the pasting, mixing characteristics, texture, and water retention of the MF and MD were examined by a rapid visco analyzer (RVA), Mixolab, texture profile analysis (TPA), and a low-field nuclear magnetic resonance analyzer (LF-NMR). The PV, TV, BD, FV, and SV of the MF declined as the incorporated amount of ERF increased. There was no significant difference in the PT at the 5–15% addition level (p < 0.05), but it showed an increasing trend at the 20–30% level (p < 0.05). The incorporation of ERF led to a significant increase in the water absorption (WA) of the MD, while the DT, ST, C2, C3, C4, and C5 exhibited a declining trend. The texture analysis revealed a significant decrease in the dough hardness with the addition of ERF, with a 55% reduction in the hardness of the 30% improved mixed dough (IMD), and the cohesiveness increased significantly (p < 0.05). The IMD was mainly composed of weakly bound water. The content of weakly bound water increased with the ERF amount. [ABSTRACT FROM AUTHOR]

The advancement of fungal biocontrol agents depends on replacing cereal grains with low-cost agro-industrial byproducts for their economical mass production and development of stable formulations. We propose an innovative approach to develop a rice flour-based formulation of the beneficial biocontrol agent Trichoderma asperelloides CMAA1584 designed to simulate a micro-bioreactor within the concept of full biorefinery process, affording in situ conidiation, extended shelf-life, and effective control of Sclerotinia sclerotiorum, a devastating pathogen of several dicot agricultural crops worldwide. Rice flour is an inexpensive and underexplored byproduct derived from broken rice after milling, capable of sustaining high yields of conidial production through our optimized fermentation-formulation route. Conidial yield was mainly influenced by nitrogen content (0.1% w/w) added to the rice meal coupled with the fermentor type. Hydrolyzed yeast was the best nitrogen source yielding 2.6 × 109 colony-forming units (CFU)/g within 14 days. Subsequently, GControl, GLecithin, GBreak-Thru, GBentonite, and GOrganic compost+Break-Thru formulations were obtained by extrusion followed by air-drying and further assessed for their potential to induce secondary sporulation in situ, storage stability, and efficacy against Sclerotinia. GControl, GBreak-Thru, GBentonite, and GOrganic compost+Break-Thru stood out with the highest number of CFU after sporulation upon re-hydration on water-agar medium. Shelf-life of formulations GControl and GBentonite remained consistent for > 3 months at ambient temperature, while in GBentonite and GOrganic compost+Break-Thru formulations remained viable for 24 months during refrigerated storage. Formulations exhibited similar efficacy in suppressing the myceliogenic germination of Sclerotinia irrespective of their concentration tested (5 × 104 to 5 × 106 CFU/g of soil), resulting in 79.2 to 93.7% relative inhibition. Noteworthily, all 24-month-old formulations kept under cold storage successfully suppressed sclerotia. This work provides an environmentally friendly bioprocess method using rice flour as the main feedstock to develop waste-free granular formulations of Trichoderma conidia that are effective in suppressing Sclerotinia while also improving biopesticide shelf-life. Key points: • Innovative "bioreactor-in-a-granule" system for T. asperelloides is devised. • Dry granules of aerial conidia remain highly viable for 24 months at 4 °C. • Effective control of white-mold sclerotia via soil application of Trichoderma-based granules. [ABSTRACT FROM AUTHOR]

Rice-based crackers with functional properties were formulated according to Taguchi's L8 design using four variables; flour composite (a0 = rice: wheat flour in 50:50 ratio, a1 = rice: wheat: corn: green gram flour in 50:40:5:5 ratio), dehydrated Moringa oleifera leaves powder (DML) (b0 = 0%, b1 = 1%), dehydrated Spirulina powder (DSP) (c0 = 0%, c1 = 1%), and Syzygium cumini bark decoction (SCBD) (d0 = 0%, d1 = 15%). Of the eight treatment combinations, crackers comprising the treatment of a1b0c0d1 (rice: wheat: corn: green gram flour in 50:40:5:5 ratio, 0% DML, 0% DSP, 15% SCBD) was selected as the most preferred sample with an acceptable sensory profile. Further studies with the crackers from the same treatment combination (a1b0c0d1) demonstrated a significantly high protein and mineral content, total phenolic content and antioxidant activity along with a significantly low carbohydrate content compared to crackers prepared with 50:50 ratio of rice and wheat flour (a0b0c0d0). [ABSTRACT FROM AUTHOR]

The purpose of this study was to investigate the effect of the simultaneous consumption of sumac powder (RhusCoriaria L.) and ferrous sulfate for six weeks on hematologic indices such as ferritin, hemoglobin (Hb), hematocrit (HCT), and mean corpuscular volume (MCV), inflammation (high sensitivity C-reactive protein), oxidative stress (TAC and MDA) and some physical fitness factors in teenage volleyball players with depleted iron stores (serum ferritin less than 40 ng/ml). In a semi-experimental study, 30 girls aged 15–18 years with three to five years of background in volleyball who were at the special level of preparation with low iron stores were screened and randomly divided into three homogeneous groups (iron supplementation, iron supplementation + sumac powder, and placebo). Capsules containing ferrous sulfate with 50 mg of elemental iron, one gram of sumac powder, and one gram of rice flour (placebo) were consumed daily by the subjects until the end of the study. Compared to the other two groups, only the iron group showed a significant increase in ferritin concentration (P = 0.000), anaerobic power of the upper limb (P = 0.04), anaerobic power of the lower limb (P = 0.01), and agility (P = 0.00). None of the three groups showed any significant changes in Hb, Hct and Mcv (P = 0.57, P = 0.36, P = 0.33), hs-C reactive protein (P = 0.06), lactate (P = 0.89), VO2max (P = 0.75) and activity heart rate (P = 0.26). The results showed that sumac powder not only did not improve the effect of iron supplementation, but also had a negative effect on it. [ABSTRACT FROM AUTHOR]

Consumer demand for healthier and more sustainable foods has led to a multitude of innovative food products. The aim of the work was to monitor the physico-chemical quality parameters (color, taste, smell, infestation, granularity, humidity, gluten index, falling number, alveographic properties, ash content, hectoliter mass of wheat) for the raw material: wheat, for the flours resulting from the milling, and for different types of flours and resulting mixtures. The mixtures were made with wheat flour and carob, oats, rice, buckwheat, and coconut flour added in proportions of 5%, 10%, and 20%. Heavy metals (Pb, Cd, Zn, and Cu) were also determined for different types of flour. The metal content was determined by the atomic absorption method using a GBC Avanta PM atomic absorption spectrometer. The detection and quantification limits were evaluated using calibration curves. The degree of coloring of the flours differs depending on the degree of extraction and, therefore, also depends on the amount of ash contained. As for infestation contamination, it was not identified in any of the analyzed flour. Rheological properties indicate the quality of flours. Flour types 480 and 550 recorded exceptional values of the rheological parameters, presenting a deformation energy (W) above 200 10-4J and a curve configuration ratio (P/E) of 1.08. The metal concentrations were between the permissible limits defined by the FDA/WHO. [ABSTRACT FROM AUTHOR]

The assessment of the explosibility and severity characteristics of Bayan coal and Tanito coal was investigated over various concentrations in a 20 L Siwek spherical explosion chamber. The coals tested in this study were also compared with other organic dusts such as palm‐based soap noodle, tea powder, black rice, and rice flour, which were tested using the same explosion chamber and procedures. The severity and explosibility of the coals increase as their concentration increases. The Pmax of Bayan coal (10.15 bar) is higher than that of Tanito coal (7.35 bar). The Kst of Bayan coal (48.04 bar m s−1) is also higher than that of Tanito coal (16.83 bar m s−1). Among all the dusts studied using the same chamber and procedures, palm‐based soap noodle has the highest Pmax at 16 bar, while tea powder has the lowest Pmax at 6.35 bar. The results show that the explosibility and severity of the coals increase as the concentrations increase, and the moisture content, coal ranking, and different types of organic dust have a significant influence on the severity characteristics of dust explosions. [ABSTRACT FROM AUTHOR]

Increased nighttime respiratory losses decrease the amount of photoassimilates available for plant growth and yield. We hypothesized that the increased respiratory carbon loss under high night temperatures (HNT) could be compensated for by increased photosynthesis during the day following HNT exposure. Two rice genotypes, Vandana (HNT-sensitive) and Nagina 22 (HNT-tolerant), were exposed to HNT (4 °C above the control) from flowering to physiological maturity. They were assessed for alterations in the carbon balance of the source (flag leaf) and its subsequent impact on grain filling dynamics and the quality of spatially differentiated sinks (superior and inferior spikelets). Both genotypes exhibited significantly higher night respiration rates. However, only Nagina 22 compensated for the high respiration rates with an increased photosynthetic rate, resulting in a steady production of total dry matter under HNT. Nagina 22 also recorded a higher grain-filling rate, particularly at 5 and 10 d after flowering, with 1.5- and 4.0-fold increases in the translocation of 14C sugars to the superior and inferior spikelets, respectively. The ratio of photosynthetic rate to respiratory rate on a leaf area basis was negatively correlated with spikelet sterility, resulting in a higher filled spikelet number and grain weight per plant, particularly for inferior grains in Nagina 22. Grain quality parameters such as head rice recovery, high-density grains, and gelatinization temperature were maintained in Nagina 22. An increase in the rheological properties of rice flour starch in Nagina 22 under HNT indicated the stability of starch and its ability to reorganize during the cooling process of product formation. Thus, our study showed that sink adjustments between superior and inferior spikelets favored the growth of inferior spikelets, which helped to offset the reduction in grain weight under HNT in the tolerant genotype Nagina 22. [ABSTRACT FROM AUTHOR]

Copyright of Science & Technology of Cereals, Oils & Foods is the property of Science & Technology of Cereals, Oils & Foods Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Carao honey is a potential functional ingredient that can generate added value to food products enriched by reducing waste. In many countries, carao has been utilized for therapeutic purposes since this type of plant extract can inhibit the growth against the most common dermatophytes, a pathogenic fungus that grows on the skin, mucous membranes, hair, nails, feathers, and other body surfaces, causing ringworm and related diseases. The physicochemical characteristics of the cookies were also investigated, which included aW, proximate analysis, hardness, and color. A sensory study was carried out to determine the rejection threshold, acceptability, purchase intent, and general taste of 90 consumers. The gluten-free cookies were prepared with carao honey as a partial substitute for rice flour in different percentages (0%, 2.5%, 5%, and 10%). The carao honey proximate composition, rheological properties, and pasting properties were analyzed. It was emphasized that incorporating carao honey into cookies improves the ingredient's sustainability. The impact of carao on the physicochemical and sensory properties of cookies was evident in color, flavor, and smell. According to the results, only samples with 2.5% carao were accepted regarding flavor and smell. Overall, liking scores, age, and flavor were the most significant predictors of purchase intent. The information given to panelists did not significantly (p < 0.05) influence liking scores only for cookies. According to physicochemical analysis, carao honey flour was high in carbohydrates (88%). The incorporation of carao produced cookies with darker colors and a softer texture. The study demonstrated that carao flour could be included to produce sensorial accepted cookies at a 2.5% addition level as an alternative in the food industry that benefits from environmental sustainability and, at the nutritional level, improves the availability of nutrients, mainly sugars and proteins. [ABSTRACT FROM AUTHOR]

Fagao is one of China's traditional gluten-free staple foods made with rice or corn flour. Corn Fagao prepared by co-fermentation with sourdough and yeast exhibits better quality and less staling compared to traditional yeast-fermented Fagao. The physicochemical properties of corn Fagao batter during sourdough–yeast co-fermentation were investigated. The results showed that compared with yeast fermentation, the gas production and viscosity of the batter increased with co-fermentation. The co-fermented batter showed a higher hydrolysis of starch and less amylose content. The integrity of starch granules in the co-fermented batter was damaged more seriously, and the crystallinity and short-range ordered structure were less than in the yeast-fermented batter, even though the crystal structure type of starch did not obviously change. The peak viscosity, minimum viscosity, final viscosity, decay value, and recovery value of the corn batter were reduced by co-fermentation, which improved the thermal stability of the batter and slowed down the aging. Co-fermentation also resulted in a more pronounced reduction in protein subunit content than yeast fermentation. The changes in the physicochemical properties of the corn Fagao batter help explain the improvement in quality of corn Fagao made from the co-fermentation method and may provide theoretical references for co-fermentation with sourdough and yeast to other gluten-free foods. [ABSTRACT FROM AUTHOR]

Weizmannia coagulans is increasingly employed in food processing owing to its health benefits. Our previous research developed Oolong tea-fortified rice noodles with unique flavor and potent antioxidant activity; however, their texture still requires improvement. In this study, Oolong tea-fortified rice noodles were fermented using W. coagulans PR06 at inoculation amounts of 1%, 3%, and 5% (v/v), and assessed for cooking quality, texture, and starch digestibility. The results indicated that fermentation with 3% and 5% W. coagulans PR06 altered the amylopectin length distribution in the rice noodles and increased the degree of starch short-range order. Furthermore, the fermentation process increased the storage modulus (G′) and loss modulus (G″) values, decreased the tan δ value, and strengthened the interactions among tea polyphenols, proteins, and starch in the rice flour gel. Consequently, this process increased the hardness and chewiness of the rice noodles, decreased their broken strip rate and cooking loss, and significantly reduced their in vitro starch digestibility. Overall, fermentation with W. coagulans PR06 markedly improved the texture and cooking quality of Oolong tea-fortified rice noodles while effectively delaying starch digestion. This study highlights the potential application of W. coagulans PR06 in developing diverse and functional rice noodle products. [ABSTRACT FROM AUTHOR]

Modernization has led to a large convenience food market, and the demand for freeze-dried (FD) soup products is increasing in the Republic of Korea. FD soup products are easy to eat without cooking and can be stored for long periods. However, it is often difficult to ensure sensory satisfaction after rehydration of FD soup products; in particular, the ingredients are not evenly dispersed. Therefore, a stable dispersion or reconstitution of the FD soup products is required after rehydration. Here, the effects of high-speed shearing homogenization on the physical properties of a carbohydrate-binder mixture comprising maltodextrin, potato starch, and rice flour were investigated during hydrothermal gelatinization. To find a suitable treatment condition, different homogenization eras, speeds, and concentrations of the binder mixture were considered; in particular, the homogenization eras were set by considering the hydrothermal property of the binder mixture profiled using differential scanning calorimetry. The viscosity of the binder mixture and the compression strength and microstructure of the FD binder block, including the dispersion stability after rehydration, were evaluated. The quality of the FD binder block was improved by homogenization above 5000 rpm when the core temperature of the binder mixture reached approximately To at 14.5–21.8% concentrations. The improved FD binder block exhibited a fine surface and tiny porous microstructure compared with the control (with continuous agitation at 250 rpm). The control block was divided into two phases, whereas the improved block maintained the initial dispersion stability at 50 °C for 1 h. These results are expected to be referenced for the purpose of improving the quality of the FD soup products. [ABSTRACT FROM AUTHOR]

Acceleration of the shelf life of glutinous rice flour can be determined using the moisture sorption isotherm method with a critical moisture content approach using the Guggenheim-Anderson-deBoer (GAB) model. This research was to determine the prediction of the shelf life of glutinous rice flour in different storage conditions based on moisture sorption isotherm using the GAB model. The stages of the research included determining the parameters of product damage, selecting the packaging, determining the storage condition (temperature 30℃ with humidity of 75%, 85%, and 90%), determining the time and frequency of sampling, data analysis, and prediction of product shelf life. The results showed that the ISA curve of glutinous rice flour had a sigmoid shape (type II). The GAB model accurately described the isotherm sorption characteristics of glutinous rice flour with a Mean Relative Determination of 4.06%. The slope was 0.21 with an R2 value of 0.9835. Generally, the shelf life of glutinous rice flour decreased due to the increasing of storage humidity. The prediction of the shelf life of glutinous rice flour with an initial moisture content of 11.30% and a critical moisture content of 16% with the storage humidity of 75%, 85%, and 90% were 133 days, 71 days dan 56 days, respectively. This research is expected to provide information about the shelf life of glutinous rice flour needed for product distribution and storage purposes.

To reveal the effects of milling methods on the physicochemical properties of rice flour and the qualities of fresh rice noodles, the rice was treated by dry, semi-dry, and wet milling methods and the resultant products were utilized to produce fresh rice noodles. The basic chemical components, the damaged starch rate, the size distribution, the morphology, the solubility and swelling power, and the pasting properties of the rice flour, as well as the texture, cooking, and sensory qualities of fresh rice noodles, were investigated. The obtained results suggested that the rice flour produced by drying methods with a 300 mesh had the highest damaged starch rate (17.55%) and solubility, smallest particle size, peak viscosity, final viscosity, and setback viscosity. By contrast, the rice flour produced from wet milling methods showed the lowest damaged starch rate (2.87%) and solubility, and the highest peak viscosity, final viscosity, and setback viscosity. Increasing the moisture content during the semi-dry milling treatment, the damaged starch rate of the rice flour decreased from 4.49% to 3.55%, and similar trend was observed for particle size distribution and solubility. Scanning electron microscopy suggested that the lower damaged starch rate, the more intact structure of the rice flour. The fresh rice noodles made from wet milling flour showed the best cooking qualities, and the cooking qualities of semi-dry milled flour-made and semi-soaking milled flour-made fresh noodles were close to those of wet milled flour-made fresh rice noodles while the rice flour produced from dry milled method was not suitable for making fresh rice noodles. The semi-dry and semi-soaking milled rice flour can replace the wet milled rice flour for the preparation of rice noodles during the practical production process. The findings in this study may assist the revolution for the traditional production of rice noodles.

Aim: Rice, one of the most widely consumed staple foods globally, relies on amylose content for its quality, impacting cooking, digestibility, and health properties. Conventional amylose determination methods are time-consuming and involve complex chemical treatments. Thus, there is growing interest in rapid, non-destructive techniques for food quality control. This study explores the potential of laser photoacoustic spectroscopy (LPAS) for predicting amylose content in rice flour. Methods: Certified rice flour standards of varying amylose levels have been analyzed using a quantum-cascade LPAS system. Preliminary analysis utilized Fourier transform infrared/attenuated total reflectance (FTIR/ATR) to identify rice starch spectral features in the IR region. Multivariate data tools like principal component analysis (PCA) and partial least squares (PLS) regression have been combined with LPAS measurements to extract information from the complex spectral data set and to demonstrate the ability of the system to predict their amylose content. Results: LPAS spectra, recorded between 7.0–11.0 μm, displayed two broad bands, showing a linear increase in signal with amylose content, especially notable in the specific fingerprint region within 8.5–10.0 μm. The prominent peak at 9.3 μm exhibited a high linear correlation with amylose levels (R2 > 0.99). PCA effectively differentiated rice flour samples, while PLS accurately predicted amylose content. The difference between predicted and actual amylose is significantly less than the statistical error of the measurement. Conclusions: LPAS combined with chemometric analysis emerges as a promising non-destructive method for rapidly assessing rice amylose content, potentially supplementing or replacing current standard methods. Its advantages, limitations, and future prospects in rice quality analysis are discussed, highlighting its role in preliminary screening.

BACKGROUND: The objective of this experiment was to investigate the role of endogenous proteins and lipids in the structural and physicochemical properties of starch in heat‐moisture treatment (HMT) rice flour and to reveal their effect on starch digestibility under heat. RESULTS: The findings indicate that, in the absence of endogenous proteins and lipids acting as a physical barrier, especially proteins, the interaction between rice flour and endogenous proteins and lipids diminished. This reduction led to fewer starch–protein inclusion complexes and starch–lipid complexes, altering the granule aggregation structure of rice flour. It resulted in a decrease in particle size, an increase in agglomeration between starch granules, and more surface cracking on rice granules. Under HMT conditions with a moisture content of 30%, slight gelatinization of the starch granules occurred, contributing to an increased starch hydrolysis rate. In addition, the elevated thermal energy effect of HMT enhanced interactions between starch molecular chains. These resulted in a decrease in crystallinity, short‐range ordering, and the content of double‐helix structure within starch granules. These structural transformations led to higher pasting temperatures, improved hot and cold paste stability, and a decrease in peak viscosity, breakdown, setback, and enthalpy of pasting of the starch granules. CONCLUSION: The combined analysis of microstructure, physicochemical properties, and in vitro digestion characteristics has enabled us to further enhance our understanding of the interaction mechanisms between endogenous proteins, lipids, and starches during HMT. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Summary: Modification of rice flour by microwave and its effect on bread making performance was evaluated. Rice flour having two different water content (20% and 30%) were exposed to different level of microwave power (600 W, 700 W and 800 W) with 8 min treatment time to assess its influence on amylose content, thermal properties, morphological structure, functional and crystalline structural that affect bread quality. Microwave‐treated rice flour at 600 W showed notable increment in amylose content of 1.03 folds (for both 20% and 30% water content) as compared to untreated rice flour. The microwave treatment destroyed the amorphous region of the rice flour starch, whereas starch crystal structure was slightly increased after treatment. Rice flour maintained its thermal stability even after exposure to high radiation of microwave. The treated rice flour exhibited starch granules with more voids on its surface, indicating the exudation of amylose at higher temperature. The major effect of microwave treatment was observed on the bread for rice flour treated at 800 W with higher specific volume, increase in gas cells pores, softer crumb, low hardness and delayed staling as compared to untreated rice flour. The microwave‐assisted treatment shows a significant potential in improving the rice flour quality led to increase the quality of bread. [ABSTRACT FROM AUTHOR]

BACKGROUND: High‐temperature (HT) stress significantly affects the quality of rice (Oryza sativa L.), although the underlying the mechanism remains unknown. Therefore, in the present study, we assessed protein components, amino acids, mineral element levels, starch biosynthesis enzyme activity and gene expression of two heat‐sensitive and two heat‐tolerant genotypes under HT treatment during early (from 1 to 10 days, T1) and mid‐filling (from 11 to 20 days, T2) after anthesis. RESULTS: Except for one cultivar, most rice varieties exhibited increased levels of amylose, chalky degree and protein content, along with elevated cracked grains and pasting temperatures and, consequently, suppressed amino acid levels under HT stress. HT treatment also increased protein components, macro‐ (Mg, K, P and S) and microelements (Cu, Zn, and Mo) in the rice flour. Both HT treatments reduced the activity of ADP‐glucose pyrophosphate, ground‐bound starch synthase, as well as the relative ratio of amylose to total starch, at the same time increasing starch branch enzyme activity. The expression levels of OsAGPL2, OsSSS1 and OsSBE1 in all varieties exhibited the same trends as enzyme activity under HT treatment. CONCLUSION: High temperatures negatively affected rice quality during grain filling, which is related to heat tolerance and grain shape. Altered enzymatic activity is crucial to compensate for the lowered enzyme quality under heat stress. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

In this study, 10–40% of oat-beta-glucan (OBG), soluble soybean polysaccharide (SSPS), and konjac glucomannan (KGM) were separately supplemented to rice flour (RF) to evaluate the effect of three soluble dietary fibers (SDF) on the cooking properties and eating quality, as well as in vitro digestibility of rice noodles (RNs). The digestive properties results suggested the addition of 20% KGM and 40% SSPS to RF significantly increased resistant starch (RS) and they were a low GI food. Textural properties analysis exhibited the addition of three SDF gave rise to a decrease in hardness (28,883–77,023 Pa), and this hardness met the production standards for RNs. The cooking and sensory quality analysis suggested SSPS had the most significant effect and KGM/OBG had little effect, particularly, 20% KGM improved the water absorption rate of RNs. The chroma results showed KGM had less influence on the L*, a*, and b* of RNs. These indicated that the addition of 20% KGM to RF provided a dietary reference for diabetic patients. [ABSTRACT FROM AUTHOR]

Rice flour (RF), a common rice product, has become an increasingly sought out ingredient for its blend flavor and gluten-free nature. However, the high concentration of native starch (> 80%) represents a technological challenge for its incorporation into food formulations, especially due to its low solubility, which may limit its food industry applications. This study shows the enzymatic hydrolysis of rice flour starch followed by optimized spray drying using protein-rich drying carriers (rice protein concentrate RPC, soy protein isolate SPI) to produce a novel, enhanced hydrolyzed rice-derived ingredient (HRI). For this, white RF suspension (25% w/v) was treated with α-amylase (70 °C, 30 min) and amyloglucosidase (50 °C, 30 min) to produce a hydrolyzed solution that was spray dried using a 33 Box-Behnken design to maximize solids recovery (%) and sugars recovery (%). Optimal conditions (10°Bx, 13.4% w/v carrier addition and 35.5:64.5% SPI:RPC) led to high solids (63.4%) and sugar recoveries (82.6%), indicative of an efficient spray drying process. Spray dried HRI showed low water activity (0.187 ± 0.001) and enhanced functional properties compared to unprocessed RF, including increased solubility (54.07 ± 0.85%), higher flowability and emulsifying attributes. Overall, we show a successful production protocol using industrially friendly techniques to obtain a novel rice-derived ingredient for food applications. These advancements pave the way for developing high-performance, stable rice starch-derived ingredients, driving innovation and expanding opportunities in food formulation and processing. [ABSTRACT FROM AUTHOR]

The article presents the research on the development of bread technology from gluten-free composite mixtures: No. 1 from a mixture of rice and flax flour (70: 30), No. 2 from flax and corn flour (50: 50) and No. 3 from pumpkin and corn flour (50: 50). A sociological survey conducted has shown that potential consumers are interested in expanding the line of gluten-free food products in the Saratov region. The following technological parameters for the production of gluten-free bread were determined: proofing time – 100 minutes, chamber temperature 35°С and relative air humidity 40%. The bread was baked for 9 minutes at 200°С and 35 minutes at 180°С with a relative humidity in the working chamber of 40%. Physicochemical studies showed that the moisture content in three samples of gluten-free bread was 1.17 times higher than the norm (46.0) compared to the control. In turn, the acidity of the sample crumb was in the range of 5.5–7.2 degrees, respectively, which exceeded the norm. The crumb porosity of the developed samples was 65.22–68.03%, respectively, while less than 68% was explained by the use of gluten-free mixtures, which were unable to form an elastic elastic frame in the products. The developed gluten-free bread contained QMAFAnM, coliform bacteria, Staphylococcus aureus, bacteria of the genus Proteus, mold fungi and pathogenic microorganisms, including Salmonella, and complies with TR CU 021/2011.As a result of the research, sample No. 3 was selected from pumpkin and corn flour (50: 50), which had high performance in terms of overall physicochemical and organoleptic characteristics. The selected sample had dimensional stability, pleasant taste, aroma and baked crumb.

A recipe of snacks based on flour composite mixtures has been developed and scientifically substantiated with the aim of extending an assortment of flour snack products belonging to the category of specialized products. These snacks are intended for consumers adhering to the health nutrition principles and, first of all, for patients with celiac disease. Gluten-free types of flour fortified with the asafoetida spice are used in the recipe. Preliminary studies demonstrated that the formulation with a ratio of 60% rice flour, 20% pea flour and 20% chickpea flour had the highest biological value among six variants of flour mixtures. Using the mass-spectrometry method, a wide spectrum of aromatic substances belonging to different classes of organic compounds was revealed in the composition of the asafoetida spice, including aliphatic alcohols, oxo-compounds, aliphatic and aromatic carboxylic acids, esters, terpenes, phenol derivatives, heterocyclic aromatic compounds (derivatives of furan and thiophene). They have a wide spectrum of action: determine taste and aroma, show the antioxidant properties, and prevent fat rancidification. The investigations showed that addition of 0.2% of asafetida to the flour mixture not only increased the oxidative stability of snacks (induction period increased by 1.5 times), but also reduced the content of lipids. This was achieved due to a decrease in fat absorption during deep-fat frying (approximately by 1.5 times). As a result, the caloric content of the product reduced by 6.8% compared to the control, the oxidation processes were retarded and the shelf-life of snacks was extended. The results of the organoleptic assessment show that gluten-free snacks with the addition of asafetida are significantly superior to the control sample. The total score of snacks with asafetida was 24 points compared to 19 points given to the control sample. They had the most harmonious appearance, color, taste, and odor according to the profilogram of organoleptic indicators among products such as gluten-free snacks based on flour composite mixtures without additives (control), with addition of dietary fibers, with addition of the asafoetida spice and dietary fibers.

Abstract Gluten-free and gum-free breads were developed, with the focus on the impact of raw materials (rice grain or flour) and processing conditions (pre-hydration and mixing time). The evaluation of bread quality primarily involved after the measurement of specific volume (BV), alveolar area (AA), and crumb hardness both before and storage. BV varied within 1.99–2.97 ml/g for rice bread and 2.14–2.26 ml/g for flour bread, with control (containing xanthan gum) values of 2.65 and 3.11 ml/g for rice and flour bread, respectively. An increase in AA was observed (rice: 0.5–1.9 mm2 and flour: 0.76–2.0 mm2) compared to controls with gum (rice: 0.36 and flour: 1.41 mm2). Pre-hydration of ingredients and reduced mixing time improved bread quality: volume of bread from hydrated rice and 4 min of mixing time was comparable to that of gum control. Although the aging process, measured by hardness, was faster than in gum-containing bread, process conditions were identified that delayed aging. This information is essential and valuable for future research.

Increasing the use of conventional plastics causes environmental problems. Producing biodegradable films from biodegradable sources might help overcome these problems. Brewer rice, a by-product in rice processing, can be potentially converted into rice flour for biodegradable film production. Ultrasonic and chemical modification can enhance the mechanical properties of the rice flour biodegradable film. This study aims to produce a biodegradable film using rice flour with different levels of amylose through conventional and ultrasonic acetylation. The rice flour was mixed and diluted with distilled water and placed in an ultrasonic bath for 15 minutes at 40 kHz agitation. The mixture was then acetylated using acetic acid. The modified rice flour was then mixed with glycerol and dried to form a biodegradable film. The produced biodegradable films were then characterized for their morphological structure, chemical composition, and crystallinity properties. Results show that ultrasonication and acetylation enhanced the elongation at the break until 2.5 times higher than the conventional process (without modification) and improved hydrophobicity. These results suggest that ultrasonication and acetylation improved biodegradable film properties, making it a potential for biodegradable packaging materials and coatings.

The study aimed to develop gluten-free Riceberry rice pasta supplemented with cricket powder using a twin-screw extruder, contributing valuable knowledge to increasing the nutritional value of pasta through sustainable practices, nutritional enhancement, and novel ingredients. The D-optimal mixture design, an effective statistical tool for optimizing formulation, was used to determine the optimal proportions of Riceberry rice flour (RF, 75-90%), cricket powder (CP, 5-20%), and xanthan gum (XG, 1-5%). The results showed that all predictive models were statistically significant with satisfactory coefficients of determination (R² ≥ 0.75), and exhibited a non-significant lack of fit. The contour plot demonstrated that pasta with high RF, XG, and low CP contents had the lowest L* and highest a* values. The incorporation of XG increased firmness, while an increase in CP led to higher protein and fat contents in the pasta. A decrease in RF resulted in reduced total phenolic content (TPC), anthocyanin content (ATC), and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) scavenging activity (AOA). The sensory evaluation scores of the pasta, in terms of the texture attribute and overall acceptance, decreased as the proportion of XG increased. The optimization analysis showed that the highest desirability was achieved with RF, CP, and XG at 84.10, 14.45, and 1.45%, respectively. The optimally desirable product had the following properties: L* at 22.60, a* at 4.80, b* at 4.78, firmness at 3.41 N, protein content at 12.57%, fat content at 4.68%, TPC at 360.13 mg GAE/100 g dw, ATC at 476.24 mg C3G/100 g dw, AOA at 25.10 mg TE/100 g dw, texture rating at 7.40, and overall acceptance rating at 7.01. This study highlights the potential of cricket powder as a protein source in gluten-free Riceberry rice pasta. It offers insights into the effects of ingredients on pasta quality and facilitates the development of nutritious and appealing gluten-free pasta. [ABSTRACT FROM AUTHOR]

In this research, the rice grains are soaked in different alkalizing agents (Na2CO3, K2CO3, and NaOH) with a pH of 12 to investigate the influence of traditional alkali processing methods on the physicochemical and processing characteristics of the resultant rice flour. Further, the microstructure, crystalline structure, molecular structure, pasting properties, thermal properties, and rheological properties of the rice flour are analyzed. Soaking the rice in Na2CO3 solution and K2CO3 solution elevates the apparent amylose content in the rice flour, increases relative crystallinity, promotes the degradation of starch molecular chain, and enhances the rice flour's ability to endure stress and heat. The gelatinization enthalpy of Na2CO3‐treated rice flour and K2CO3‐treated rice flour increases, while the viscosity indices of paste gel decrease. The use of alkaline salts during steeping helps mitigate short‐term retrogradation in rice products. However, in comparison to these alkaline salts, NaOH solution with the same pH has minimal impact on the surface and longitudinal section morphology structure of starch–protein in rice grain, pasting properties, thermal properties, and rheological properties of rice flour due to its lower Na+ concentration. This indicates that NaOH solution with the same pH value cannot replace alkaline salt solutions in traditional alkali processing techniques. [ABSTRACT FROM AUTHOR]

This study investigated the potential utilization of milk thistle seed protein (MTP) isolates in gluten-free muffins to enhance the protein quantity and technological attributes. MTP was employed to partially substitute a blend including equal amounts of rice flour and corn starch (RCS) at 3%, 6%, 9%, and 12%. The study encompassed a rheological assessment of muffin batters and physicochemical, textural, and sensory analyses of the muffins. The consistency coefficient (K) of muffin batters exhibited an increase with the incorporation of MTP, with all batters demonstrating shear-thinning behavior (n < 1). The dough samples exhibited solid-like characteristics attributed to G′ > G″, indicative of their viscoelastic nature. The storage modulus (G′) and loss modulus (G″) escalated with higher levels of MTP, suggesting an overall enhancement in dough viscoelasticity. The muffin containing wheat flour displayed the lowest hardness value, followed by MTP-added muffins at ratios of 12% and 9%. Additionally, MTP-added muffins exhibited greater springiness values than control samples without MTP (C2). However, the oxidative stability of MTP-added muffins was lower than the wheat control muffin (C1) and gluten-free control muffin. The protein content in muffins increased with MTP addition, reaching parity with wheat flour muffins at 6% MTP replacement. Sensory analysis revealed that substituting RCS with up to 6% MTP did not significantly alter the overall quality (p > 0.05), whereas higher MTP levels (9% and 12%) led to a decline in sensory attributes. Incorporating MTP at up to 6% yielded protein-enriched muffins with sensory characteristics comparable to the wheat flour muffin (C1). Furthermore, higher MTP additions (9% and 12%) conferred more favorable textural properties than the C2 muffin. However, the oxidative stability of the control muffins was found to be higher than that of MTP-added muffins. This study suggested that MTP could be a potential ingredient to increase the protein amount and specific volume of gluten-free muffins and to improve textural attributes such as springiness and hardness. [ABSTRACT FROM AUTHOR]

Black glutinous rice flour (BGRF) had the potential to be used as a wheat substitute to increase the health-promoting nutritional value of pasta products. The purpose of this study was to investigate the possibility of using BGRF as an alternative to wheat flour in the production of pasta to improve its nutritional value. The research explored the physical, chemical, sensory properties, and consumer acceptance of pasta formulations with 0%, 20%, 40%, and 60% BGRF substitution. The findings revealed that pigmentation of BGRF contributed to increased phenolic compounds and antioxidant properties, which impacted physical and chemical properties of the pasta. The results indicated that a 40% substitution of BGRF was well-liked by consumers, while a 60% substitution led to decreased acceptance. The physical properties of uncooked pasta (UC-PAS) and cooked pasta (CK-PAS), such as moisture content and color values, were significantly influenced by the percentage of BGRF substitution. Specifically, the moisture content of UC-PAS decreased with higher BGRF substitution, resulting in changes in color values. These changes included an increase in redness, as well as a decrease in lightness and yellowness. Additionally, the pigmentation of BGRF contributed to increased phenolic compounds and antioxidant properties, which affected physical and chemical properties of the pasta. The pasta’s cooking quality, including cooking time (CKT), cooking loss (CKL), and cooking yield (CKY), also showed significant differences with varying percentages of BGRF substitution. Furthermore, the proximate composition indicated that the percentages of ash, protein, fat, and fiber increased as the proportion of BGRF increased, with pasta containing 60% BGRF demonstrating the highest values for these properties. All these findings provide evidence that BGRF substitution had a significant positive impact on the physical, chemical, and sensory properties of pasta. For example, the pasta had better antioxidant properties and was well-accepted by consumers. The potential for enhancing the nutritional profile of pasta products by substituting wheat flour with BGRF is noteworthy. [ABSTRACT FROM AUTHOR]