Search

During a fire event, potentially hazardous chemicals are formed from the combustion of burning materials and are released to the surrounding environment, both via gas and soot particles. The aim of this investigation was to study if firefighting techniques influence the emission of chemicals in gas phase and soot particles. Five full-scale fire tests were extinguished using four different firefighting techniques. A nontarget chemical analysis approach showed that important contaminants in gas and soot separating the different tests were brominated flame retardants (BFRs), organophosphate flame retardants (OPFR), polycyclic aromatic hydrocarbons (PAHs) and linear hydrocarbons. Reproducibility was evaluated by a field replicate test and it was determined that the temperature curve during the event had a bigger impact on the released chemicals than the firefighting technique used. However, despite fire intensity being a confounding factor, multivariate statistics concluded that water mist with additive resulted in less BFR emissions compared to foam extinguishing. The analysis also showed that the conventional spray nozzle method released more PAHs compared with the water mist method. The comprehensive chemical analysis of gas and soot released during fire events was able to show that different firefighting techniques influenced the release of chemicals.

Dust analysis provides a means to assess the degree of exposure of humans in an indoor environment to various contaminant classes such as flame retardants, pesticides and others. There is increasing interest in non-targeted acquisitions using high resolution mass spectrometry (HRMS) to better capture the contaminant profile. However, these studies are confronted with the challenge of assessing confidence in proposed identifications, particularly when authentic standards are not available. Here, we demonstrate the analysis of dust extracts representing various indoor environments (industrial e-waste processing and domestic) for high-abundance environmental contaminants using a data-independent LC-HRMS approach, incorporating ion mobility spectrometry (IMS) to provide additional characterization capability for the complex samples. Twenty-nine xenobiotic compound identifications were made based on both targeted and non-targeted processing approaches using accurate mass precursor and product ion measurement combined with an ion mobility derived collision-cross section (TWCCSN2) determination. Characterization of the repeatability of TWCCSN2 value measurements and their average relative error to compared authentic standards of 0.38% were consistent with various published studies and represent a robust measurement property. TWCCSN2 values were particularly useful in cases where confirmation after the initial dust analysis was performed using a different chromatographic method, due to the gas-phase measurement being unaffected by such changes. Observed compound TWCCSN2 values were then compared to predicted CCSN2 values obtained using two different machine-learning based predictive techniques. Results from one of the predictive programs indicates a promising avenue for use of these models for supporting compound identification in non-targeted analyses.

A single workflow based on three approaches (target, suspected and non-target screening) using liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (LC-QTOF-MS) in data independent acquisition mode (DIA) was developed to assess the presence of emerging pollutants (EPs) in water and sediments from a Mediterranean River Basin. Identification of potential contaminants was based on mass accuracy, isotopic ratio pattern, theoretical fragmentation, and retention time using Waters UNIFI software. In the suspect screening against a library containing 2200 components, 68 contaminants were tentatively identified, 6 of which were confirmed and quantified with analytical standards. Non-target screening (NTS) required additional manual processing and the aid of an on-line database (ChemSpider) to tentatively identify compounds. Eprosartan, an antihypertensive drug not included in the library used for suspected screening, was confirmed and semi-quantified. The identification of Eprosartan proved the workflow to be functional for NTS. Target screening of 171 pesticides and 33 pharmaceuticals and personal care products (PPCPs) including the compounds confirmed using suspect and non target screening achieved monitoring of the most abundant contaminants from the head to the mouth of the Turia basin to establish their spatial distribution. QTOF-MS screening versatility with its high-resolution capability allows for a comprehensive assessment of EPs in the aquatic environment.

Detailed polychlorinated biphenyl (PCB) signatures and chiral Enantiomer Fractions (EFs) of CB-95, CB-136 and CB-149 were measured for 30 workers at a transformer dismantling plant. This was undertaken to identify sources of exposure and investigate changes to the PCB signature and EFs over different exposure periods. Approximately 1.5 g of serum was extracted and PCB signatures were created through analysis by comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (GC×GC-TOFMS) and EFs calculated following analysis by gas chromatography with high resolution mass spectrometry (GC-HRMS). A total of 84 PCBs were identified in the serum samples with concentrations of the 7 indicator PCBs ranging from 11-350 ng g(-1) of serum (1.2-39 μg g(-1) lipid). The PCB signatures were interpreted using principal component analysis (PCA) which was able to distinguish workers with background or recent minimal exposure from those with prolonged occupational exposure. Occupationally exposed individuals had a similar PCB profile to Aroclor A1260. However, individuals with prolonged exposure had depleted proportions of several PCB congeners that are susceptible to metabolism (CB-95, CB-101 and CB-151) and elevated proportions of PCBs that are resistant to metabolism (CB-74, CB-153, CB-138 and CB-180). The results also identified a third group of workers with elevated proportions of CB-28, CB-60, CB-66, CB-74, CB-105 and CB-118 who appeared to have been exposed to an additional source of PCBs. The results show near complete removal of the CB-95 E2 enantiomer in some samples, indicating that bioselective metabolism or preferential excretion of one enantiomer occurs in humans. By considering PCB concentrations along with detailed congener specific signatures it was possible to identify different exposure sources, and gain an insight into both the magnitude and duration of exposure.