Search

Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) was designed to study high-energy cosmic rays up to PeV and recorded data from August 22nd, 2017 to February 12th, 2019 on the ISS. In this analysis, the Silicon Charge Detector (SCD), CALorimeter (CAL), and Top and Bottom Counting Detectors (TCD/BCD) are used. The SCD is composed of four layers and provides the measurement of cosmic-ray charges with a resolution of $\sim$0.2e. The CAL comprises 20 interleaved tungsten plates and scintillators, measures the incident cosmic-ray particles' energies, and provides a high energy trigger. The TCD/BCDs consist of photodiode arrays and plastic scintillators and provide a low-energy trigger. In this analysis, the SCD top layer is used for charge determination. Here, we present the heavy nuclei analysis using the ISS-CREAM instrument.

One of the consequences of having a high-density calorimeter as part of an experiment is a large number of secondary shower particles generated in the calorimeter -- some of which scatter back up towards the charge measurement devices. This so-called "backscatter effect" can interfere severely with accurate charge measurement of the primary nucleus, especially at high energies, as the number of backscattered particles increases with the incident energy. In this analysis, we study the effect of backscattered particles on particle identification by simulating the ISS-CREAM instrument model detector response using the GEANT3 simulation package [1] with the FLUKA hadronic model [2]. Our study shows the importance of the fine segmentation of charge detectors above the calorimeter. It can minimize backscattered particle contamination in the same charge detector segment as the incident particle to avoid its charge misidentification. We present simulation results regarding charge measurements, including the tracking resolution, backscattering effects, and charge determination efficiency.

The Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) experiment successfully recorded the data for about 539 days from August 2017 to February 2019. In this talk, we report the measurement of the cosmic-ray proton energy spectrum from the ISS-CREAM experiment in the energy range of 2.5 TeV - 650 TeV. For the analysis, we used the silicon charge detector (SCD) placed at the top of the ISS-CREAM payload to identify the incoming cosmic-ray charge. The SCD is finely segmented to minimize charge misidentification due to backscatter effects. The four-layer SCD consists of 10,752 silicon pixels, each of which is 1.37×1.57×0.05 cm^3 in size. The calorimeter (CAL) consists of 20 layers of tungsten/scintillating fibers preceded by carbon targets. It provided cosmic-ray tracking, energy determination, and the high-energy trigger. The Top and Bottom Counting detectors (T/BCD) are above and below the CAL, respectively, and provided the low energy trigger. Each T/BCD is composed of an array of 20×20 photodiodes on plastic scintillators. The measured proton spectral index of 2.67±0.02 between 2.5 and 12.5 TeV is consistent with prior CREAM measurements. The spectrum softens above∼10 TeV consistent with the bump-like structure as reported by CREAM-I+III, DAMPE, and NUCLEON, but ISS-CREAM extends measurements to higher energies than those prior measurement

International audience; Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) experi-ment is designed to study the composition and energy spectra of cosmic-ray particles from 10^12 to 10^15 eV. ISS-CREAM was launched and deployed to the ISS in August 2017. The ISS-CREAM payload employs a Silicon Charge Detector for charge measurements, Top and Bot-tom Counting Detector for electron-hadron separation and a low-energy trigger, a Boronated Scintillator Detector for additional electron-hadron separation, and a Calorimeter (CAL) for en-ergy measurements and a high-energy trigger. The CAL is constructed of 20 layers of tungsten plates interleaved with scintillating fiber ribbons read out by hybrid-photodiodes (HPDs) and densified carbon targets. Each CAL layer is made of 3.5 mm (1 X_0) thick tungsten plates alter-nating with fifty 0.5 mm thick and 1 cm wide scintillating fiber ribbons. Consecutive layers of fiber ribbons are installed orthogonal to each other. Energy deposition in the CAL determines the particle energy and provides tracking information to determine which segment(s) of the charge detectors to use for the charge measurement. Tracking for showers is accomplished by extrapolating each shower axis back to the charge detectors. The performance of the ISS-CREAM CAL during flight is presented.

International audience; Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) is an experiment for studying the origin, acceleration, and propagation mechanisms of high-energy cosmic rays. The ISS-CREAM instrument was launched on the 14th of August 2017 to the ISS aboard the SpaceX-12 Dragon spacecraft. The Top and Bottom Counting Detectors (TCD/BCD) are parts of the ISS-CREAM instrument and designed for studying electron and gamma-ray physics. The TCD/BCD each consist of an array of 20 × 20 photodiodes on a plastic scintillator. The TCD/BCD can separate electrons from protons by using the difference between the shapes of electromagnetic and hadronic showers in the high energy region. The Boosted Decision Tree (BDT) method, which is a deep learning method, is used in this separation study. We will present results of the electron/proton separation study and rejection power in various energy ranges.

International audience; The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) is designed and built to measure the elemental energy spectra of cosmic-ray particles (1 ≤ Z ≤ 26) and electrons. It measures the energy of incident cosmic rays from 10^12 to 10^15 eV. ISS-CREAM was launched and deployed to the ISS in August 2017. The Science Operations Center (SOC) at the University of Maryland has been operating the payload on the Interna-tional Space Station (ISS) in coordination with the Payload Operations Integration Center (POIC) at NASA’s Marshall Space Flight Center. The SOC has been responsible for sending commands to and receiving data from the Science Flight Computer (SFC) on board ISS-CREAM. The ISS-CREAM data taking program interfaces with the POIC using the Telescience Resources Kit through the Software Toolkit for Ethernet Lab-Like Architecture developed by the Boeing Company. The command uplink and data downlink have been through the Track-ing and Data Relay Satellite System. We present the ISS-CREAM flight operations including ISS communications, SFC performance, etc.

International audience; Cosmic Ray Energetics and Mass for the International Space Station (ISS-CREAM) is designed to directly measure the energy spectra of high-energy cosmic rays, encompassing proton to iron nuclei, over the energy range from 1012 to 1015 eV [1]. The capability to measure an extended energy range enables us to probe the origin and acceleration mechanisms of cosmic rays. The ISS-CREAM instrument is configured with the balloon-borne CREAM calorimeter (CAL) for energy measurements and four layers of a finely segmented Silicon Charge Detector (SCD) for charge measurements. In addition, two new compact detectors have been developed for electron/proton separation: Top and Bottom scintillator-based counting detectors (TCD/BCD) and a boronated scintillator detector (BSD). Simulations use the GEANT3 package [2] with the FLUKA hadronic model [3]. An isotropic event generator was developed for the ISS-CREAM geometry with particles incident from the upper hemisphere. We will present simulation results regarding ISS-CREAM performance, including trigger rates, energy resolution, energy response, tracking resolution, charge efficiency, etc.

International audience; The Cosmic Ray Energetics And Mass (CREAM) instrument on the International Space Station (ISS) is an experiment to study origin, propagation, acceleration and elemental composition of cosmic rays. The Top Counting Detector (TCD) and Bottom Counting Detector (BCD) are parts of the detector suite of the ISS-CREAM experiment and are designed to separate electrons and protons for studying electron and gamma-ray physics. In addition, the TCD/BCD provide a redundant trigger to that of the calorimeter and a low energy trigger to the ISS-CREAM instrument. After launching, the TCD/BCD trigger was found to be working well. Also, the TCD/BCD have been stable and their hit positions were confirmed to be well matched with other detectors on board. We present the performance and status of the TCD/BCD in flight.

International audience; The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) is a space-borne mission designed for the precision measurement of the energy and elemental composition of cosmic rays. The Silicon Charge Detector (SCD), placed at the top of the ISS-CREAM payload, consists of 4 layers. Each layer has 2688 silicon pixels and associated electronics arranged in such a fashion that its active detection area of 78.2 × 73.6 cm 2 is free of dead area. The foremost goal of the SCD is to efficiently and precisely measure the charge of cosmic rays passing through it. The 4-layer configuration was chosen to achieve the best precision in measuring the charge of cosmic rays within the constraints on the mass, volume and power allotted to it. The amount of material used for its support structure was minimized as well to reduce the chance of interactions of the cosmic ray within the structure. Given the placement of the SCD, its 4-layer configuration and the minimal amount of material in the cosmic-ray trajectory, the SCD is designed to measure the charge of cosmic rays ranging from protons to iron nuclei with excellent detection efficiency and charge resolution. We present the design and fabrication of the SCD as well as its performance during space environment tests which it underwent successfully. We also present its performance in charge measurement using heavy ions in a beam test at CERN, the European Organization for Nuclear Research.

The Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) instrument is a next-generation experiment for the direct detection and study of cosmic-ray nuclei and electrons. With a long exposure in low Earth orbit, the experiment will determine the particle fluxes and spectral details of cosmic-ray nuclei from hydrogen to iron, over an energy range of about 1 0 12 eV to > 1 0 15 eV, and of cosmic-ray electrons over an energy range of about 5 × 1 0 10 eV to > 1 0 13 eV. The instrument was deployed to the ISS in August 2017 on the SpaceX CRS-12 mission. We review the design, implementation and performance of one of the ISS-CREAM detector systems: a boron loaded scintillation detector used in discriminating electron-induced events from the much more abundant cosmic-ray nuclei.

International audience; The Cosmic Ray Energetics and Mass experiment at the International Space Station (ISS-CREAM) is developed for studying the origin, acceleration and propagation mechanism of high energy cosmic rays. The Top and Bottom Counting Detectors (TCD/BCD), sub-detectors of the ISS-CREAM instrument, are developed for electron/ γ -ray physics. The TCD/BCD help distinguish electrons from protons by comparing the hit and shower width distributions for electrons and protons. The e/p separation capability of the TCD/BCD is studied by using the GEANT3 simulation package, and optimal parameters for the e/p separation are obtained.

International audience; The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) is scheduled for launch in 2017. It is designed to directly measure and identify theelemental composition of incident Galactic cosmic rays from a few hundred GeV to PeV energies.Such large energy range sensitivity is reached by using an electromagnetic sampling calorimeter(CAL) which measures the energy deposit of particle-induced showers. The CAL is composedof twenty layers of tungsten plates interleaved with scintillating fibers, and glued together usingepoxy-coated fiberglass to comply with space launch requirements. In August 2015, beam testmeasurements were performed at CERN to verify the performance of the CAL using layers ofepoxy-coated fiberglass placed between tungsten plates. The CAL response to electron and pionbeams and its performance are reported and compared with previous beam test configurations.

International audience; The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) is a space-borne mission designed for the precision measurement of the energy and elemental composition of cosmic rays. It is scheduled to be launched and installed on the ISS in August 2017. The Silicon Charge Detector (SCD), placed at the top of the ISS-CREAM payload, consists of 4 layers. Each layer has 2688 silicon pixels and associated electronics arranged in such a fashion that its active detection area of 78 x 74 cm2 is free of any dead area. The foremost goal of the SCD is to efficiently and precisely measure the charge of cosmic rays passing through it. The 4-layer configuration was chosen to achieve the best precision in measuring the charge of cosmic rays within the constraints on the mass, volume and power allotted to it. The amount of material used for its support structure was minimized as well to reduce the chance of interactions of the cosmic ray within the structure. Given the placement of the SCD, its 4-layer configuration and the minimal amount of material in the cosmic-ray trajectory, the SCD is designed to measure the charge of cosmic rays ranging from protons to iron nuclei with excellent detection efficiency and charge resolution. We present the design and fabrication of the SCD. It successfully underwent space environment tests including vibration and thermal-vacuum qualification. We present the performance of the SCD during these tests, as well as its charge-measurement performance on the ground using cosmic muons and heavy ions in CERN beam tests.

International audience; The Cosmic-Ray Energetics And Mass (CREAM) instrument for the International Space Station (ISS) is a detector for studying the origin, acceleration and propagation mechanism of high-energy cosmic rays. The ISS-CREAM instrument is scheduled to launch in 2017 to the ISS. The Top and Bottom Counting Detectors (TCD/BCD) are designed for studying electron and gamma-ray physics. The TCD/BCD are composed of a plastic scintillator and an array of photodiodes The active detection areas of the TCD/BCD are 500 $\times$ 500 mm$^2$ and 600 $\times$ 600 mm$^2$, respectively. The TCD/BCD were completed in 2015 and passed the environmental tests for safety in a space environment. After finishing these tests, the TCD/BCD were integrated with the payload. The TCD is located between the carbon target of the ISS-CREAM instrument and the calorimeter, and the BCD is located below the calorimeter. The TCD/BCD can distinguish between electrons and protons by using the different shapes between electromagnetic and hadronic showers in the high-energy region. We study the TCD/BCD performance in various energy ranges by using GEANT3 simulation data. Here, we present the status of the electron and proton separation study with the TCD/BCD simulation.

International audience; The Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) instrument is designed and built to measure elemental spectra of cosmic-ray nuclei (1 ≤ Z ≤ 26) and electrons. It will measure energy of incident cosmic rays from 1011 to 10^15 eV with a tungsten/scintillator sampling calorimeter and densified carbon target with an interaction length of ~ 1 λL. A finely segmented, four-layer silicon charge detector will identify the elemental composition with a resolution of ~ 0.15e. The instrument is triggered by selectable, independent, and combined algorithms from the calorimeter and a scintillator-based counting detector on the top and bottom of the calorimeter. The counting detectors also provide separation of protons and electrons using differences in the shower shapes. A boronated scintillator detector provides additional e/p separation by looking at late scintillation light produced by a particle interacting in the calorimeter system. ISS-CREAM underwent vibrational, electromagnetic, thermal/vacuum, and telemetry systems tests at various NASA f acilities to qualify for rocket transportation and space operations. All testing and integration were completed and ISS-CREAM was delivered to NASA. It is now flight ready and waiting for launch on SpaceX-12 in 2017. ISS-CREAM integration, environmental qualification, and instrument performance will be presented.

The time dependence of the relative light emission of Eljen Technology EJ-200 polyvinyltoluene-based plastic scintillator was measured between 1 and 10 μ s after the passage of a particle shower, a singly charged particle (atmospheric muon), and with a UV LED exciting the fluor. This was compared in magnitude to the integrated response for the prompt light (within 500 ns of excitation). A model with a time-dependent yield consisting of three exponentially decaying components (fast, medium, and slow) was developed to fit the data. Note that the exact time structure of early ( 1 μ s ) light emission was not measured for individual components, only for all three components together This model assumes all three components share the same rise time. The decay time constants of the fast, medium and slow components are, respectively, 7.8 ns, 490 ns, and 2370 ns. The relative total normalized yields for each component are: fast 95.8%, medium 2.2%, and slow 2.0%.

International audience; The Boron And Carbon Cosmic rays in the Upper Stratosphere (BACCUS) balloon-borne exper-iment flew for 30 days over Antarctica in December 2016. It is the successor of the CREAMballoon program in Antarctica which recorded a total cumulative exposure of 161 days. BAC-CUS is primarily aimed to measure cosmic-ray boron and carbon fluxes at the highest energiesreachable with a balloon or satellite experiment, in order to provide essential information for abetter understanding of cosmic-ray propagation in the Galaxy. The payload is made of multipleparticle physics detectors which measure the charge up to Z=26 and energy of incident particlesfrom a few hundred GeV to a few PeV. The newly designed Transition Radiation Detector (TRD)measures signals that are a function of the charge and Lorentz factor. In April 2016, BACCUSwas taken to CERN in its flight configuration to characterize its detectors’ response to beams ofelectrons and pions. The performance of the TRD using beam test data are reported in this paper.

International audience; The Cosmic Rays Energy And Mass (CREAM) balloon payload directly measures the composition and elemental spectra of cosmic rays in the upper stratosphere. It is designed to probe the acceleration mechanism and propagation history of cosmic rays at energies from 10$^{12}$ up to 10$^{15}$ eV. Being the fifth flight in a series of seven, CREAM-V took data above Antarctica for 39 days from December 1$^{st}$ 2009 to January 8$^{th}$ 2010. The instrument comprises a tungsten/scintillating fiber calorimeter using graphite as a target for the energy measurement which had been calibrated at CERN (European Organization for Nuclear Research). The charge measurement of the incident particles is performed by means of a Silicon Charge Detector (SCD), a Cherenkov Detector, a Cherenkov Camera (Cher-Cam) and a Timing Charge Detector (TCD). In this paper we present results from the on-going data analysis and compare them to data collected by the previous CREAM_III flight.

International audience; The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) is a direct cosmic-ray detection experiment deployed on the ISS in August 2017. It aims to reveal the sources, acceleration processes, and propagation of cosmic rays by observing individual elemental spectra at energies in the TeV-PeV range. ISS-CREAM consists of multiple complementary particle detectors. This work utilizes the Silicon Charge Detector (SCD) to measure cosmic-ray charges from protons to iron nuclei with a resolution of 0.1-0.3e, and the calorimeter (CAL) to determine the cosmic-ray track and measure its energy by sampling the shower energy deposit of secondary particles. With more than 1-year of observations, we analyzed cosmic-ray spectra of various prominent species such as protons, helium, carbon and oxygen nuclei. We will report preliminary elemental spectra of cosmic rays for energies greater than about 10 TeV.

International audience; The ISS-CREAM payload was launched on the SpaceX-12 Commercial Resupply Service mission to the International Space Station (ISS) from NASA’s Kennedy Space Center on August 14, 2017. It was successfully installed and activated on the ISS Japanese Experiment Module Exposed Facility as an attached payload on August 22, 2017. The ISS-CREAM instrument is configured with complementary particle detectors capable of measuring elemental spectra for Z = 1 - 26 nuclei in the energy range ~10^12 – 10^15 eV; as well as electrons at multi-TeV energies. The four layers of its finely segmented Silicon Charge Detectors provide precise charge measurements, and its ionization Calorimeter provides energy measurements. In addition, scintillator-based Top and Bottom Counting Detectors and a Boronated Scintillator Detector distinguish electrons from nuclei. The goal is to understand cosmic ray origin, acceleration and propagation by extending direct measurements of cosmic rays to the highest practical energy. On-orbit performance of the instrument and preliminary results from the ongoing analysis are presented.

International audience; The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) is scheduled to be launched and installed on the ISS in August 2017, and will carry out a measurement of the energy and composition of energetic cosmic rays in space. The Silicon Charge Detector (SCD) will identify the charge of through-going cosmic rays. It consists of four layers, each with 2688 silicon pixels and associated electronics. The ISS-CREAM payload was delivered to the launch site, Kennedy Space Center, in August 2015 after the successful completion of integration and space environment tests. A heavy-ion beam, required to verify the capability of precision charge measurement of the SCD, became available at the European Organization for Nuclear Research (CERN) in November 2016. A prototype instrument using the same types of silicon pixel sensors and electronics installed in the SCD was placed in a heavy-ion beam composed of secondary ions ranging from helium to zinc. We present the charge resolution for each ion as a function of the number of layers used for charge measurement so that the improvement in charge resolution is clearly demonstrated as the number of layers for charge measurement increases.

International audience; The balloon-borne Cosmic Ray Energetics And Mass experiment had its third flight (CREAM-III) over Antarctica for 29 days from December 17, 2007 to January 19, 2008. CREAM-III was designed to directly measure the elemental spectra of cosmic-ray nuclei from Hydrogen to Iron in the energy range from 10^12 to 10^15 eV. Energy of incident cosmic rays was measured with a calorimeter that consisted of a densified carbon target directly above a stack of 20 alternating layers of tungsten and scintillating fiber ribbons. Multiple charge measurements were independently made with the silicon charge detector (SCD), Cherenkov Camera (CherCam), and a Timing Charge Detector (TCD) in order to identify particles and minimize backscattering effects from the calorimeter. Compared to previous CREAM flights, the electronic noise of CREAM-III was reduced, significantly lowering the energy threshold. Results from on-going analysis of the energy spectra will be presented.

International audience; The balloon-borne BACCUS experiment measures directly the elemental spectra of cosmic-ray nuclei from protons to Fe over the energy range ~10^12 to 10^15 eV. It focuses on the energy dependence of secondary to primary ratios (e.g. B/C) to investigate cosmic-ray propagation history. BACCUS consists of redundant and complementary particle detectors including the Timing Charge Detector (TCD), Transition Radiation Detector (TRD), Cherenkov Detector (CD), Silicon Charge Detector (SCD), and Calorimeter (CAL). The TCD measures the light yield produced by the particle in plastic scintillator. The TRD provides energy measurements of incident 3 ≤ Z ≤ 26 nuclei in the 102 – 105 Lorentz factor range. The CD responds only to particles with velocity exceeding the velocity of light in the plastic. It allows BACCUS to reject the abundant low energy cosmic rays present in the polar region. The CAL is used to determine the particle’s energy for all nuclei for 1 ≤ Z ≤ 26. With the SCD based on pixellation, in addition to the TCD based on timing, and the CD, the BACCUS instrument implements virtually all possible techniques to minimize the effect of backscatter on charge measurements in the presence of a large particle shower in the CAL. The 30 day flight was carried out successfully over Antarctica in 2016 from Nov. 28 to Dec. 28. The integration test, and performance of instruments will be presented.