Search

As part of the development of the beam imaging system at the European Spallation Source, luminescent screens have been fabricated by the flame spraying of scintillating materials onto stainless steel backings. A total of seven screens were produced, three of chromia alumina (Al2O3:Cr), two of YAG (Y3Al5O12:Ce) and two of a 50/50 mix of these. The properties of these screens under proton irradiation were evaluated using a 2.55 MeV proton beam at currents of up to 10 A. Irradiation times were up to 25 h per sample, during which luminescence-, spectrographic-, thermal- and current-data was sampled at a rate of 1 Hz. Preliminary results of these measurements are reported here; with a quantitative analysis presented for one of the chromia alumina screens and a qualitative comparison of all three material types. The luminescent yield for chromia alumina was determined to be around 2000 photons/MeV for a virgin screen, and was found to drop to 1.5% after 167 mC of proton irradiation. A recovery of the luminescence of chromia alumina to >60% was observed after beam current was reduced for an 8 h period. Observations indicate that the YAG and mixed composition screens retain higher luminescence than the chromia alumina even at temperatures of over 200 °C. It is indicated that the luminescence from YAG feeds the R-lines of chromia alumina in the mixed composition screens.

Fast-neutron/gamma-ray pulse-shape discrimination has been performed for the organic liquid scintillators NE 213A and EJ 305 using a time-of-flight based neutron-tagging technique and waveform digitization on an event-by-event basis. Gamma-ray sources and a Geant4-based simulation were used to calibrate the scintillation-light yield. The difference in pulse shape for the neutron and gamma-ray events was analysed by integrating selected portions of the digitized waveform to produce a figure-of-merit for neutron/gamma-ray separation. This figure-of-merit has been mapped as a function of detector threshold and also of neutron energy determined from time-of-flight. It shows clearly that the well-established pulse-shape discrimination capabilities of NE 213A are superior to those of EJ 305. The extra information provided by the neutron-tagging technique has resulted in a far more detailed assessment of the pulse-shape discrimination capabilities of these organic scintillators., 22 pages, 12 figures, 2 tables

In many IBA applications the aim is to obtain quantitative figures characterising the sample, usually requiring a reliable measurement of the beam current for normalisation. To avoid the drawbacks associated with on-sample and post-sample charge measurement systems a pre-sample measurement system can be used. In this work an upgrade to the pre-sample charge measurement system at the Lund Ion-beam Analysis Facility is presented, in which a custom built control module based around a Teensy 3.2 micro-controller has been added to the existing system. The new control module allows for remote handling and monitoring of the deflection system, operated via USB connection to a PC running a graphical user interface. Details of the control modules functionality, design and programming are given, as well as the functionality of the user interface. An example of how the new control module can be used for automated calibration of the deflection system is also presented.

The response of a position-sensitive Li-glass based scintillation detector to focused beams of 2.5 MeV protons and deuterons has been investigated. The beams were scanned across the detector in 0.5 mm horizontal and vertical steps perpendicular to the beams. Scintillation light was registered using an 8 by 8 pixel multi-anode photomultiplier tube. The signal amplitudes were recorded for each pixel on an event-by-event basis. Several pixels generally registered considerable signals at each beam location. The number of pixels above set thresholds were investigated, with the optimization of the single-hit efficiency over the largest possible area as the goal. For both beams, at a threshold of ~50% of the mean of the full-deposition peak, ~80% of the events were registered in a single pixel, resulting in an effective position resolution of ~5 mm in X and Y., 22 pages, 8 figures, to be submitted to Nucl. Instr. and Meth. in Phys. Res. A

A light-yield calibration of an NE 213A organic liquid scintillator detector has been performed using both monoenergetic and polyenergetic gamma-ray sources. Scintillation light was detected in a photomultiplier tube, and the corresponding pulses were subjected to waveform digitization on an event-by-event basis. The resulting Compton edges have been analyzed using a Geant4 simulation of the detector which models both the interactions of the ionizing radiation as well as the transport of scintillation photons. The simulation is calibrated and also compared to well-established prescriptions used to determine the Compton edges, resulting ultimately in light-yield calibration functions. In the process, the simulation-based method produced information on the gain and intrinsic pulse-height resolution of the detector. It also facilitated a previously inaccessible understanding of the systematic uncertainties associated with the calibration of the scintillation-light yield. The simulation-based method was also compared to well-established numerical prescriptions for locating the Compton edges. Ultimately, the simulation predicted as much as 17% lower light-yield calibrations than the prescriptions. These calibrations indicate that approximately 35% of the scintillation light associated with a given gamma-ray reaches the photocathode. It is remarkable how well two 50 year old prescriptions for calibrating scintillation-light yield in organic scintillators have stood the test of time., Comment: 20 pages, 8 figures, 4 tables